What is a Weapon Magnifier and do you NEED one?

[@Hoplopfheil]

You definitely need a magnifier! Unless you have a scope. Then it would just get in the way.

[@micstudmuffin]

A 3x magnifier with a 10x scope is 30 magnification though.

[@WildPhoenix989]

Didnt expect to see hop here lol

[@thepeoplesupdates676]

😂😂😂😂 tell em hop!

[@arcuz7862]

@@micstudmuffin I put a 5x magnifier behind my 8-40 scope and now I can finally count and confirm how many rings Saturn has.

[@Antykain]

G33 is still my fav and go-to.. I have LPVO's and HWS+magnifier setups and while each has their place where each accels.. I still like the HWS+magnifier combo the best.

[@therightarmofthefreeworld4579]

Thanks Eotech, just ordered an exps3-0 and the g45 magnifier, patiently waiting for the ups driver RN.😂

[@Maine307]

probably the best, hands down, down n dirty explaination. this helped me very much. thank you!

[@eotechinc]

Glad it helped!

[@jojoupton]

I love my Wilcox 5/8 riser flip to side mount. If I didn’t use it, I’d most likely use the flip to center. Great video

[@SlyTerminator62]

I just ordered my first EOTech EXPS3-2 and G45( both in tan 😏) yesterday for my IWI X95! I’ve been wanting to get one since playing Ghost Recon Wildlands in 2017!

[@AJJALALI]

Thank you so much bro very brief and helpful description

[@Howard_Roark]

Just so you know, penultimate means second to last.

[@Rmx61999]

Thank god, I had no idea what number that was

[@thenipper78]

I came here for this, the preeminent comment.

[@housebuckley5519]

@eotechinc, thanks for the great 101! Can you please provide the recommended products for a DDM4v7p converted to SBR? I would like to have the hybrid setup as shown in this video as STC.

[@petrikupiainen]

Great video! I use G43 with exps3-0 on my Daniel Defence. On my JP gmr-15 just exps3-0.

[@eotechinc]

Very nice!

[@TheSlamdunkasaur]

@@eotechincbring back the 511 551

[@Kinsman_216]

Can you fit a rear sight with magnifier and optic?

[@glenjohnson2038]

I have an EOTech holographic scope on my .460 S&W revolver. I’m thinking about using a magnifier but will one work with long eye relief. My revolver has a 10” barrel and a bipod.

[@joylopez3990]

It helps a lot, thanks brother!!

[@Chuckinlead]

Just got my 1st eotech the exps3-2 i got it for the 2 dots however you cant even see them its just a red fuzzy mess i checked with a magnifier looks great wish i knew you needed a magnifier to make use of the dots...

[@JulianB85]

I have now a G43 and a EXPS (green) before it was a normal XPS. My question is, do i need the 7 mm riser when i use the G43 with the EXPS ? I ask because I find that the position of the G43's lens to the EXPS is at least visually better aligned when not using the riser. It looks kind of weird with the riser. I just want to know if the riser actually needs to be used because it's just optimal?😉

[@danielmcdonald4767]

I don't see anyone ever discussing this - I have the g33 and to get best eye relief, it has to be mounted literally at the most rear ward slot on the rail. This now puts the lever for the quick disconnect almost touching the charging handle and is in the way. Yes, i have an ambi charging handle, but it renders the left side almost unusable. What are people doing to mitigate this? What am I missing that I can't even find people talking about it? Furthermore, why on earth would eotech design the lever to swing rearward instead of forward. I swapped it to swing to the left, but that obstructs my field of view as a right hand shooter. Anyone have insight or advice? Thx

[@lou1784]

I purchased an EOTECH G45 with no mount and currently waiting for it to arrive. I also purchased a Unity FTC. Did not think of it when buying the two but, will the mounting screws come with the G45?

[@miles267]

G33 is arguably the best magnifier of their line and not mentioned.

[@doodad]

I use a magnifier behind my LPVO to increase the magnification and put my eotech in front of my LPVO to still take advantage of the holographic sight. Works great for me. Monolithic upper helps since I utilize a significant amount of rail space

[@kidmick809]

You’re missing an ACOG at the end

if using my Eotech HWS to allow use of BUIS visible in lower 1/3, and wanted to use that trick center mount (what company makes that?) for my Eotech magnifier: how will that affect my ability to use BUIS at 1/3 height? My guess is not a bit (as in not change anything except swap out Eotech Magnifier mount for that center line unit) but have not yet visited the website to company offering that magnifier mount. Appreciate any insights, information, suggestions, or any other useful input!

[@leandroogavadepaulasouza5012]

Great content, thanks !

[@TheChakita44]

Where do you get that flip to center?

[@Nach0s187]

Unity

[@brandonwardlow4246]

What’s the interpupilary distance of the G33?

[@momanddad7382]

Happy Birthday Marine, Semper Fi Devil Dog

[@maroonblood151]

Is it normal for magnifiers to lose center with the reticle? After I flip to side, I notice that my g45 magnifier loses center (not zero) and it either shifts to the left or right.

[@shammy313]

With Eotech enjoying all that sweet sweet DOD contract money. How and TF is the g43 still 600.

[@maroonblood151]

How to flip to center with backup irons?

[@2009ridgeback]

You can use 45deg. offset back up sights

[@philliprousu652]

What happens if you zero the reticle on the red dot while using the magnifier? nothing?

[@eotechinc]

Nothing

[@a_double_]

Why no mention of the G33?

[@rr_spec1809]

Exps3 hhs viii w/ G33 is 👌 🔥 love mine and won’t go to anything else

[@Hiddencomment007]

bought my first eotech holosight last night... and im so gay for it

[@EvilSinReaper]

😂😂😂

[@OBS_Luke]

🤣🤣🤣

[@StuPierce77]

It's ok to be gay, bro.

[@bronxwarrior319]

GREAT

[@FirstnameLastname-vy2dg]

Off into the great blue yonderrrrr

[@davidwarren719]

How did yall get Christian Slater to star in this video? Must have cost a fortune

[@Booper2021]

Anyone know if you can run mbus pro rear sight with the flip to center?

[@kndacomplx]

this I would also like to know

[@devrinmg]

If you’re asking for height then no, I have a exps3 with the qd which is lower 1/3 plus a Unity riser that brings it up to the flip to center height 2.26” but because both a qd it’s not a big deal take both off and use irons if my luck is that bad 😂

[@Booper2021]

@@devrinmg Gotcha, I was actually referring to the rear sight fitting underneath the flip to center when both are folded down but sounds like it does? Thanks!

[@devrinmg]

Ahh ok gotcha that I’m not sure, I don’t have a pro rear. If your running a Omni for a EO tech mag you should be fine with pros

[@julesclain9091]

Penultimate doesn’t mean ultimate

[@julesclain9091]

It means next to last…

[@np4057]

I would love to have one but man, so expensive. I really like the unity mount too over the stock mount

[@LordDirus007]

He forgot to mention, Flip to center, you can run back up sights

[@msquared9605]

How? Looks like the flip to center and back up sight will not work at all to me

[@DbzDan78]

looks like you have to put your hws higher to use the flip to center magnifier mount.

[@chrisbenson1222]

gimme that ogl please

[@eotechinc]

It’s coming!

[@willieluv]

I love unity mounts but I can’t use back up iron sights so original mounts is what I use.

[@1olddirtroad]

@willieluv That's what your VISIBLE/IR Laser is for

[@devrinmg]

That’s what the qd is for

[@willieluv]

@@1olddirtroadthank you for your reply I guess I wanted something that doesn’t require batteries.

[@willieluv]

@@devrinmgI am sorry what is a qd?

[@Flack55]

​@@willieluvQuick Detach. Broski's saying if your HWS fails, pull it and your magnifier off via their QD mounts, and go to work with your backup irons

[@EricCheech]

That scope on backwards in the background rifle on the wall

[@captainsewerrat]

"It's a lil scope you can flip in front of your sight." there, I saved you 7+ Minutes.

[@pyeitme508]

Wow

[@webrootask]

I own one and i would say you dont really need one, back up irons with a red dot are solid

[@mooktemas6800]

If y’all can’t get a strong battery from Elon Musk, y’all should at least add the shake-wake function please. Only reason I’m not running this wonderful system is because I don’t want to pick it up and forget to turn it on when seconds count.

[@IsaacSchultz]

Are people actually buying non MOTAC red dots these days? That would be crazy.

[@Aaron-ed2rb]

Discount code??? 😆

[@eotechinc]

Black Friday 😉

[@TheDoomWizard]

Allows you see MUCH more farther

[@chltmdwp]

I use G45 to zero my Eotech.

[@wesleyroberts679]

Just remember when you run a magnifier, all your windage & elevation are backwards. Hence they are upside-down.

[@bigdogpeck1874]

Hello, and good morning. I’ve seen a lot of videos here on KZbin of ppl using clones to the eotech brand and I was curious as how do you all at eotech feel about this foolishness. Because I watched this video a few times so that I was able to see the eotech brand real deal products and the truth is those clones look really look like the real deal, but they have on the side for law enforcement and military written on the side of the red dot sight.

[@sashababich827]

For me, the biggest dowside is, that setup like thts has 4 surface to maintain clean...