What is the Risk of Getting SHOCKED While Welding?

[@davidlee2003]

Thank you for taking on the task of sharing this information. While I am only as green as green can be with welding, this was great information as I dig deeper and grow in what I know.

[@col.cottonhill6655]

Never be ashamed to learn. Even the genius asks questions! I got into welding mostly as a hobby. I'm actually a certified auto technician. That's how I got into it. But I learned 98% of my welding knowledge from KZbin and alot from this channel too.

[@mattio79]

The smartest people on earth ask questions. Learning requires clarification. A true expert is the one that can explain their craft to ANYONE, and tailor that to the knowledge of the recipient. The only way for them to know what the recipient knows is to ask questions.

[@chrisewing3272]

Always good to ask questions. Hopefully this dispels some of the fear new welders may have about the trade. Thanks for watching!

[@bquade70]

Here also....👍👍

[@ypaulbrown]

@@chrisewing3272 great video Chris!!!!!!

[@antononononon]

I am a welding newbie and this video has cleared a lot of things out for me. I was deadly afraid to touch anything, even with the appropriate ppe, gloves and all. I have always wondered, watching people weld on youtube, how are they all still alive)) Now it all makes more sense. Thank you so much.

[@lyster1ne681]

This I think is the most overlooked hazard in welding! Thanks for the good info. My only serious shock was when I was in weld school. We had big 240 amp breakers in the back of every booth that the welders plugged into. One day I was crouched down on the floor, chatting with a friend while clearing a birds nest. The machine was off, but I had neglected to turn the breaker off. I started pulling the wire out of the liner and piling it on the floor behind me, When all of a sudden ZAP! The wire found it’s way into a tiny gap between the plug and the socket, and shocked the hell outta me. Thankfully it was so hot that it instantly cut the little .035 wire, but my arm was numb for the rest of the day. Needless to say, I never forgot to turn off the breakers after that!

[@seahorse5677]

Yes, this is the most important safety precaution in terms of electrocution and welding. Making sure all plugs are connected and insulated properly, as well as breaking the current when finished welding. Some of the cheap 240 plugs and extensions can be loose fitting or have poor insulation. 240 can kill you in less than 10 seconds.

[@pvtimberfaller]

That's not actually a welder specific issue. I had one of those 4' power strips on my work bench and managed to wiggle a wire into one of the outlets. From the statements I can tell people don't understand how 240 works.

[@dieseldabz7104]

@@pvtimberfaller How tf did you manage to do that exactly?

[@pvtimberfaller]

@@seahorse5677 Unless it was 3 phase He would have been bit by 120, not 240.

[@77Avadon77]

I think most of these welders are really hard to shock yourself with. The number one Hazard I would say from welding is actually long-term exposure to welding fumes. I didn't really notice that too much in the first few years of TIG welding, but as the years progressed I started to get more sensitive to it and now I tend to take ventilation and under mask respirators more seriously. When you're laying out a lot of welds you have to be careful. For the guy who welds 10 minutes here there you probably have nothing to worry about but if this is your career be careful with your respiration.

[@joebrother7116]

Thank you so much for this. This is one of my main anxiety factors in being a beginner

[@Rig0r_M0rtis]

Same. Even tho I know how electricity works my lizard brain just does not like electric arcs

[@brianp1738]

One of the first questions I asked when getting into welding. Until now I have NEVER gotten a good answer. Great video!

[@Welddotcom]

Thanks for watching!

[@bquade70]

Excellent video👍👍

[@twestgard2]

Yes, this is the most complete answer I’ve been able to find to the question of what the shock hazard really is. Much appreciated.

[@chrisewing3272]

Thanks for watching, and glad this information was beneficial.

[@dieseldabz7104]

Then you must not have gone to welding school, or they weren't good at their jobs idk which..

[@nichmon3221]

Yes, it was helpful! I am a woman about to take welding classes and you just taught me more about how currents work.

[@beachboardfan9544]

Should have been said that the reason you can weld with a lethal amount of amperage but not get electrocuted is because the voltage is too low to push that current through your body. Your bodies resistance is too high. Theres really minimal risk until you get above 50 volts. However there are circumstances that reduce your bodies resistance like being really sweaty or working in wet conditions or having grinding dust stuck to your sweaty arms. So just because most welders run a voltage low enough to be considered safe, you can get yourself into higher risk situations depending on the circumstance.

[@Robert-cu9bm]

Exactly the same reason you can touch a car battery that puts out 1000amps. You need the volts.

[@MatthewOMara1]

Beach & Board - Great additional info. Helpful for me as a new welder. Thank you!

[@wileecoyoti]

Nailed it. On top of that the arc he's showing towards the end is a high voltage, high frequency striking arc that only exists for the initial strike. Once a stream of plasma is established for the low voltage, high amperage tig arc that HF start turns off. It's high frequency and low amperage for the exact reason that it won't feel like much of anything if a user makes a mistake. He is, indeed acting as a ground clamp (where do you think that clamp eventually connects? Same place as our shoes!). You get a little jolt when you're connecting between the table and the HF start because it's a short path (just the hand), less resistance from the body so higher current can carry. Welding barefoot in the shop on a sweaty day (Florida style) gets you a few extra zaps.

[@MrTheHillfolk]

On a hot nasty day ,messing with the positive connection on a 24v battery setup tickles me. Feels more like you grabbed a pricker bush, just surprises you it doesn't really hurt. Nice shiny snap on wrenches help the connection 😂

[@ronsta2552]

Spot on.....Once again I say...I love it when people with knowledge come to the table.

[@kenwatson6902]

When I was a kid my Dad was stick welding on a piece that was grounded through the table. It is often hot as crap in Alabama. My Dad had on a white t-shirt that was soaked in sweat. I was also quite sweaty. I came up beside him and leaned/propped on the vise that was on the table and then put my arm around my Dad in a hug. The sky crashed, we hollered, I think I saw his bones like in a cartoon. Dad has a thing about being shocked. We finally got loose and I started running thinking he was going to kill me. Me as a 14 or so year old boy and him at 44 or so ran out of the back of the shop across the field behind. When I finally gave out I turned and grabbed my side...Dad ran right by me. He wasn't after me...he was just trying to get away!! HAHA

[@edwardpinto7018]

I got shocked so bad on a stick welder it burnt a divot in the back of my hand. I’m not sure what polarity I was set up as, or how I completed the circuit, but I sure as hell got seriously shocked, that experience keeps me watching videos on this subject.

[@jimandskittum]

I was a commercial electrician. The worst shock I ever got in my life was stick welding under a car while sweaty. That sh!t lit me up worse than 277vac.

[@77Avadon77]

@@jimandskittum 🤯😱

[@MoltenMouseMetal]

Open-circuit voltage tends to be higher to help in establishing the initial arc before dropping down to the "normal" welding current.

[@eelectricsnake5797]

Did u touch the electrode to the back of your head by accident. Nothing worse than getting shocked and not knowing why.

[@bobs12andahalf2]

Reverse polarity with rutile electrodes is better for welding hands, seems to reduce that cratering effect that you observed.

[@tt600pch]

As a past millwright I can attest to the "fun" of welding on equipment out in the rain on your wet knees. Some guys can "feel" the shock more than others. I remember once welding on a wet floor while holding a piece on the steel on the sawhorses. I felt a zap every time I struck an arc. I had my shift partner do it and he felt nothing. We grabbed a multimeter and went from the wet floor to the sawhorse proving my point. Being the guys to finish the job we swapped the electrode and ground leads and ordered new leads for replacement.

[@cew995]

Electrocution actually means to get killed with electricity. This is a common thing for people to use the word electrocute when they mean shocked. I got “corrected” my first day at the electric utility I worked for 36 years, so that was a big deal for me. I hope I didn’t offend you it’s just one of my “things”. You did a very good job explaining why the current doesn’t go through you. Thanks for educating.

[@chrisewing3272]

I assure you no offence taken, and I've been corrected several times on that now; but being specific is important, so I appreciate you keeping me honest. Thanks for watching!

[@hermedica]

Yep....You answered the exact question I had and the demonstration was perfect!! Thank you. Going to practice my first weld this weekend!!!

[@kaptein1247]

yes, happens quite often. Doesnt hurt much. Might hurt a lot if you use yourself as groundclamp, Im not planning on finding out tho

[@danwebber9494]

I was holding two haves of a dog kennell together and my buddy struck the arc on the one that wasn’t grounded, so it went through me. Definitely hurts.

[@christians131]

I’ve always been pretty good about wearing PPE while welding (lost a lot of family to cancer) but can’t really think of a time I’ve been zapped. Getting burned on the other hand is a completely different story😂

[@ironic492]

Bent a rod to make a hinge and dropped the rod right after it stopped glowing, right onto my arm, safe to say the channel locks got sent across the room at mach jesus

[@christians131]

@@ironic492 throwing tools and loud swearing eases the pain for me too🤣

[@1pcfred]

The greatest risk is in wet conditions. Like if you're welding and the ground is wet. Then you become a much better ground for electricity to sink to. If the ground is wet, your boots get wet and your gloves get wet you might get lit up then.

[@starwars910]

Currently work at a food refinery (building is 97 years old) place is in worse condition than most are used to. Every time I have to make a weld in the field here I get lit up unless it’s in a dry area which is unrealistic in this swamp. Worst shock was on a miller 300amp welder, grabbed the handle while touching the ground. Let’s just say me leaning to the left before I touched it probably saved my life as I wouldn’t have been able to let go 😭

[@daveshongkongchinachannel]

That was exactly the explanation I was looking for.

[@hawkie333]

This is great. I’m just always "afraid" of the electricity, which means I’m thinking about what is turned on/off and where my hands are, ppe, etc. People have still been electrocuted when sweat/water gets involved. Glad you mentioned sweat because it can be a real problem.

[@theodinchaseshow2908]

I just bought an inverter welder and figured I would teach myself with the help of KZbin. I clicked on about 4 videos before this one and did not really get the clairity I was looking for in your video. So thank you very much. Just Subscribed!

[@chrisewing3272]

That's awesome to hear, thanks!

[@TWX1138]

I caught a shock the other day when trying to tig-weld 5052 for the first time. REALLY caught my attention.

[@RR31982]

I’ve seen tig welders shock people before ⚡️😬⚡️

[@leh3827]

Yes your video is helpful. I got plenty of questions answered by watching it. Thanks

[@smevox7490]

This whole video makes me nervous haha. Thanks for the video makes me feel a little safer when welding.

[@chrisewing3272]

And that’s exactly why we made it, not to make people reckless, but rather to inform and encourage. Thanks for watching!

[@mrdddeeezzzweldor5039]

My MIG welder has a voltage potential of around 33 VDC from tip to ground when you pull the trigger. In contrast, my 3 vintage stick welders have OCV's ranging from 60 to 80 VAC. 33v can be felt but is not necessarily lethal. 60 to 80v certainly can be if you're not careful and mindful. Welding is not for the foolish or careless. Add to the possibility of imminent harm, burns and blindness are likely hazards unless you protect yourself

[@steve_jabz]

Thanks for this. Had been considering getting into welding but after watching several other videos like this it was still kinda ambiguous. This is just plain and simple, down to earth while still covering all bases. I feel completely confident about avoiding the risks now

[@chrisewing3272]

Thanks for the compliment, stay safe, not scared and thanks for watching.

[@77Avadon77]

This is something you almost have to try to do. In over two decades I have yet to shock myself welding. So it's not the easiest thing to come by. As long as you ground your work you'll be fine

[@Al-jh9ie]

Thanks for this video. Started Tig welding last week. In my excitement forgot ground clamp the first time. That hurt, like a lot. Second time was when I touched the tungsten with the filler, that hurt a little bit less, but I still knew about it.

[@DoctorZoiberg69]

Thank you for advice and very informed video.

[@chrisewing3272]

You're quite welcome. It's why we do what we do!

[@twitch54304]

Omg I got that 9v shock tig welding and it scared the shit out of me the first time. Thanks for the video cause I stopped welding for a couple weeks thinking the machine was faulty.

[@Rickugg]

Hello: Do not stand in damp or wet grass and pick up the part with the rod in it.

[@chrisewing3272]

I agree completely, water and electricity do not mix well. Thanks for watching!

[@ssholeEater]

That good ol farm weldin🤠

[@oldlincolnpipewelder]

I do steam repairs for a local school district. We go underneath some of them and the crawls can be really really nasty, in between or great. The worst ones you have to crawl on your belly. Sometimes through mud and water. Rule #1 Proper PPE Rule #2 Always stay dry! Especially your hands! Rule#3 always bring a bucket for tools to stay dry, and always bring something to lay on if you need to. 10 years of experience pays off. I’ve ridden the lightning many times 🤣

[@chrisewing3272]

Good rules to keep in mind, thanks for sharing. “Ridden the lightning,” 😂 I like that.

[@oldlincolnpipewelder]

@@chrisewing3272 😏 Ohh the stories I could share haha! I love the channel guys! Tell Bob to take it easy on the camera man and cut him some slack every once in a while! 🤣

[@Welddotcom]

😂

[@georgem.kokindajr.941]

Great video! I just wanted to mention about being cautious when standing in a damp or wet area when welding, because you can get shocked very easily.

[@WillShackAttack]

I got shocked adjusting my ground clamp today during my welding class. I think it had something to do with touching the ground clamp to another clamp that holds the little table up on a vertical pole.

[@cesare8270]

Shocked myself today lol that crap really hurt. Don't weld with damp gloves

[@bquade70]

Great video! Actually all great info for us newbies- thx! Lake Havasu 🌞 Az

[@tombarnes1871]

Enjoyed the information for a new DIY guy

[@joao.mossmann]

i was tig welding once and managed to touch the feeding rod to the tungsten and then touch all that mess to the piece i was welding, thankful to be alive right now

[@SeamlessFab]

Thankful to be alive because you dipped the rod in the tungsten? This is common.

[@mking3219]

Thanks man!

[@chrisewing3272]

You are quite welcome! Thanks for watching and commenting.

[@djalgoriddim]

Thanks. I always wondered this so helpful to know.

[@PeaceNGrease]

Good vid! I used to weld structural steel (think large I-beams). It was a really hot day (100+ degrees with gloves, leathers, helmet, etc). I was sweating my ass off. I had to weld on purlin brackets (mig). I climbed-up on the I-beam with the ground clamp behind me. Sat my wet ass on the i-beam & struck an arc. Whew I got a nice little zap out of that lol.

[@Chebva]

Welding your ass to the I-beam, holy moly.

[@rsanchez5676]

Probably the best explanation ever! Excellent!!

[@biffdotorg]

Very timely. Thank you. Just bought my first welder this past week and full gear. But always thought in the back of my mind how hard it would be to shock myself. I do appreciate you taking one for the team!

[@chrisewing3272]

You're quite welcome, thanks for watching!

[@drpipe]

Thanks so much for this, i started Big a while back and had several Zaps... I thought it was just me. I put it down to beginners bad habits. This cleared up all the mystic.

[@Stevecollinsclear]

much appreciated - exactly what I wanted to know

[@phillipgarrow2297]

We have a old tig welder at work we call it old sparkey if you lean hard into the table it won't give you a shock but if you forget it will nail you .

[@boogerzekesweldingemporium4833]

Very well explained. Thanks

[@Katya5cat]

Hell yes! Many times for me almost always from sweaty gloves. Sometimes wet ground.

[@Ma_X64]

When your hands is wet it's quite sensitive when you're touching both wires. Also on some machines using with long welding cabels (especially standalone welding generators) voltage can be really high like 120 or even 200 Volts or so and it's really dangerous. You can face this machines for instance in ship production. High voltage needed to achieve a required current with long welding cirquit. There're cases when welders even been killed working in some wet areas.

[@kenspaceman3938]

Great vid for newbies like me, thanks 🙏

[@werkzeugmann6224]

excellent! thanks

[@pvtimberfaller]

I have been bit many many times welding. There are so many variables that dictate whether it is a hazard or just a nuisance. Working for an irrigation company I have welded standing in knee to waste deep water many time & in pouring rain.

[@Hey_Its_That_Guy]

That was helpful, thank you!

[@chrisewing3272]

I’m so glad you found it helpful, it’s why we do what we do. Thanks for watching!

[@Welddotcom]

Thanks for watching!

[@terrymoody8638]

Thank you. I got the answer I have been searching for. Great information.

[@Cptnbond]

Thanks for very good and important episode. There are so many welder YT-channels that talk about electricity and electrode polarity in a such confusing ways - which just shows they have not grasped the correct terms and physic about it at all.

[@chrisewing3272]

You're very welcome; glad it's still helpful!

[@sleepchamber]

Excellent lesson. thank you!

[@jmartin_og]

Thanks Chris. Really appreciate you taking the time to demonstrate this, cheers Jake.

[@chrisewing3272]

You're very welcome, happy to contribute to the platform. Thanks for watching.

[@videosyoutube115]

Very good explanation. 👏👏 Thanks very much.👍

[@Ratkill9000]

I've been shocked mig and tig welding. Made my hand and arm go numb for a moment.

[@jellyellie4949]

Long time welder here with a focus/specialty in aluminum welding. I've wacked myself with the full current quite a few times at 200+ amps and nearly daily with at least a little tickle (I sweat a lot). In the first shop I learned in and many since it was quite a fun game to stick a ground to a man's stool so he gets a good wack after break, stick a tig rod in the cup and touch someone with it, and many other extreme safety violations. With all of this being said I have never had any lasting problem or seen such. I'm not saying its safe, infact I'm almost sure its not, but in 9 years of AC welding I have yet to see a serious injury from the current despite some really stupid shit going on.

[@Ma_X64]

200 amps cant go through your body with welding voltage. To get what current it was you can divide your welding voltage to your body resistance (app. 1 kOhm in most bad cases i.e. 1000 Ohms) And remember that dangerous current is 30 mA (0.03 A) and mortal current is about 100 mA. For executions on electric chair used just 2 Amps but to push it trhough a human body you need a couple of thousands Volts.

[@jellyellie4949]

@@Ma_X64 Yes clearly, I'm aware I was getting a very fractional amount of the current actually anywhere inside my body due to low voltage. I'm much more mechanically minded but I know a Lorentz force or two, and I'm aware the full amperage output or anywhere close would kill me or at least give some nasty internal wounds. My point I was trying to convey in fewer words was I was getting much more than the "searching voltage" or whatever the term for the incredibly low power state the machine runs in until its noticing the circuit closed through its own ground and despite repeated extreme circumstances (sitting on a metal stool while soaked head to toe in sweat, leaning on/in enclosures while drenched in sweat, ect, fail to create sufficient circumstances to allow any real power to permeate the body. With that said, the danger is likely in the extreme unluck of the tiny current that makes my arms jump some days causing some sort of heart issue. But yes, thank you for the obvious.

[@jellyellie4949]

Also for anyone following the replies, I don't mean to be on any sort of high horse about being good at aluminum, it's not harder or more skill, its just different from steels. The key difference making it relevant here being that the alternating current welding process has a tremendous more liking for jumping around where it shouldn't be. I'm still trash at stainless :D .

[@nomennescio7571]

Thank you so much for the ground-clamp-on-stool idea, someone's going to get a surprise where I work 🤣

[@briancarty9454]

I’m glad somebody mentioned sweat playing a factor. I’m guilty of tig welding in a tee shirt and ending up with a bad sunburn more than once since I don’t do it for a living…. The times I’ve gotten zapped good is during the summer in AZ. Salty sweat is a great conductive bridge for getting zapped😆

[@travishanson166]

Inverter machines are much safer than non-inverter machines. when indoors, the examples apply, being indoors and dry will increase the safety of AC only transformer machines and ac/dc transformer machines as well, but get good and sweaty in a shop after 10 hours or more in the heat and more dangerous shocks become possible. in all the production shops I worked the fixtures were grounded to welder and the soil. Outdoors, welding on cars, farm equipment and other projects where you are in contact with soil, or potentially in contact with soil, the dynamics change substantially, especially if using a transformer machine, especially when using ac only buzz boxes. always make sure you are either fully isolated from the dirt when welding outside or the workpiece is in full contact with the dirt or both and always have dry spare gloves when sweaty and running AC stick your sweat will cause you to get a very bad shock if you are touching the workpiece and putting a new electrode in the stinger. even with a dc process on a transformer machine, electrocution is possible if you are not isolated from damp soil and the working voltage of the machine.

[@chrisewing3272]

Great info. The examples shown are absolutely in a controlled environment, and there are so many variables to consider. Thanks for sharing!

[@MatthewOMara1]

Thanks for sharing!

[@drewmurray2583]

HAHAHA I can't believe you purposefully shocked yourself with HF!!! right on you just earned a subscriber!

[@motorv8N]

Great demo- very helpful for new welders

[@baymoe1]

Thanks for the video. Looking to weld for the first time and this was immensely valuable.

[@chrisewing3272]

Truly glad you found it helpful. Thanks for watching and commenting!

[@Mr.Rendier]

My first time tig welding Made me feel the shock instant. And to me it hurt 😂😅 tbh i was kinda scared to do tig again but this video realy helped me out thanks man!

[@m16ty]

I've been zapped many times by a TIG torch and stick electrode. What usually gets you on TIG is the high frequency start when running DC, and the continuous high frequency when on AC. A stick will also bite you, especially when sweaty and when welding in damp places. Doing outdoor stick welding in the mud and water is the worst.

[@raulgil7389]

This instructional video is worth watching twice or more times. Well done and thanks for sharing. Ring of Fire…

[@shortfuse43]

Very informative video...thanks for posting it.

[@marshabufkin7367]

Great video. I've been an electrician for 22 years (4 years apprentice, 18 years journeyman). I've worked on new and complete residential re-wire to coal fired power plant industrial and many commercial projects. Don't know anywhere close to as much about welding as you know. But, from an electricians point of view, I know that if I'm working on something hot and only come in contact with one point, I probably will only feel something like a bee sting, because, the current doesn't have a path to flow. But, if both hand are in contact with a panel, then I come in contact with current, then that current has a path to flow, which is up one arm, across my chest and through my other arm, therefore, crossing my heart, which will probably kill my on the spot. In this video, I notice that while you pulled the trigger on the whip, and the MIG wire began to feed out onto one of your 'ungloved' hands, your other had was also 'ungloved'. I wonder what would have happened if your other hand had been in contact with the table when you pulled the trigger. PLEASE DON'T DO THIS. But, when I see something like this, the 'electrician' side of my thinking is automatic. As an electrician, I think 'Safety at the start, Safety in the middle, and Safety at the end". Anyone that pressures me to speed things up by taking safety shortcuts, I pick my tools up and go find someone else to work with. As a journeyman electrician, I never have trouble finding work that pays more that enough to provide for my family.

[@SeamlessFab]

What does this have to do with the video topic at hand

[@pondacres]

Thx for the explanation! I never been zapped yet, and honestly I'm not much worried when I got the welder plucked into 110v. But when I got it plugged into 220v, I get real careful!

[@KD-jf9nd]

Yup. Sure can. It happened many times in my weld booth in school. When it’s 100 and 97% humidity in leathers things get sweaty.

[@OttoTheImmortal]

You answered a question I had yesterday. Very fortunate that you immediately made a video.

[@Welddotcom]

Let us know if you have any other questions!

[@charlesyoung8600]

Thanks for this!!!!!!!

[@calebc6028]

awesome. Start on the 7th.

[@fredhinck9685]

Yup, have a Dynasty 200dx. Got the high freq zap ac tig welding, bad ground through my arm.

[@kurchak]

Watching this was terrifying lol. Glad to see I am being overly safe though, as should everyone! Thanks for the video!

[@loofy26]

Wow you just ansxwer questions i was wondering for my entire life thanks a lot sir !! cheer from France

[@zakaroonetwork777]

While learning to Tig, I touched the tungsten to the work and when I pulled it away the arc jumped into my torch hand. It messed me up so bad that I had to drop out of welding school. Glad this topic has finally been addressed.

[@zip7806]

@@MrOldclunker Well, I'm A profesionl TIG welder today anyway.

[@glitched4070]

Great video 👍 thanks

[@tidobass6048]

I always liked using the 280dx many options for tig also the dynasty 350 was great for pulse tig and heliarc

[@chrisewing3272]

It's a great machine for sure. Thanks for watching!

[@tidobass6048]

@@chrisewing3272 always. I welded professionally for quite some time have had my chances at many machines applications and processes. After almost 10 years in the field I had to walk away for family matters. This brings me back to a prime of my fabrication abilities. Nowadays I’m in a completely different field but reflect to an old passion. I wish the fab shops in my area would pay more than 18$ an hour so it might be worth my time. But sadly they are a dime a dozen for 12$ -16 and that doesn’t even touch my overhead

[@aarondavis5386]

One other important thing we saw Mr Ewing complete a circuit through his hand, but your hand doesn't have vital organs in it. What can kill you is a few milliamps across the heart for that to happen you really need a circuit where the points of contact are hand and foot/leg/lower torso or hand and hand

[@andrewgregory5362]

Brilliant - finally a video that answers all my questions regarding shock risks without all the theory! Theory is important but some simple examples are priceless! Thanks.

[@Thinker7221]

I got the gear but no idea 😂 so this has been very helpful to know before I make a start for the first time. Thanks for your time and knowledge

[@twag0735]

I tig weld stainless exhaust for dirt bikes, side by sides, and ATV’s for a living. I don’t know how many times I’ve been tacking things up and pick the piece off the table but still have my arm on the table… 100amp flash tack will quickly let you know you messed up 😂

[@shellyrobinson2795]

omgg broo your very brave thanks for helping me get over some of my fears abot welding thank you a lot

[@viking8781]

Of course you can, I have many times. The hit from air arcing hurts like hell though.

[@rufatabbasov]

Thank you! This was an excellent explanation.

[@rcytb]

As a teen, I spent a lot of time doing oilfield welding for my Dad. Most of it was outside, on all-metal machinery. When the ground, the knees of my pants, and my cotton work gloves were all wet, I was often reminded that my steadying hand was too close to the rod clamp. It was a real shock - but I was always able to move my hand away.

[@laytonmiller5865]

This is what I needed. Also this guy is going above and beyond by literally zapping himself to show us whats up. KZbin Grammy nomination right here.

[@robburke5577]

Thanks. That definitely answered my question about the wedding ring.

[@Seedyrom247]

Answering the questions we were too afraid to ask. Thank you.

[@Welddotcom]

We are open to any requests any time! [e-mail]

[@chrisewing3272]

Never be afraid to ask questions, chances are you're not the only one wondering the same thing. You can always check out the forum at www.weld.com/forum and connect with a bunch of industry experts, and see the answers to questions others have already asked. Thanks for watching!

[@sausages6135]

Nice video! Try the ground clamp on a sausage then arc to that please

[@chrisewing3272]

That absolutely sounds like an experiment the high schoolers would enjoy.

[@sausages6135]

@@chrisewing3272 I bet you'd enjoy it.

[@demondell746]

Thanks for your video, other youtube teachers get people terrifyed welding and turn people away from welding as you just proved in fact its very hard to get electrocuted. Well done thank you.

[@blackhawkinternationalsecu6962]

Shocking good information. I feel better now about resting my stick on my glove from time to time.

[@UnfortunateDesert]

I was a little tickled once when I was welding on the underside of a trailer and a microburst popped up- wasn't too alarmed, but it was initially a bit of a suprise...;)....

[@Erocker2123]

Thank you for the video

[@evanhughes6788]

Been Shocked pretty good when arc started on ac tig, 200 amps. Had a good burn on my left elbow and put me on my butt for a minuet. Jig I was using was made of wood and had no good ground parts moved due to heat warping. Speak up for yourself, i knew i shouldnt have been doing it but i was getting paid. Keep yourself safe.

[@reajenthomas4601]

Awesome video!! explains with practical example - loved it!!

[@diymechanic1655]

ive had small shocks while welding in rain. both from stick welding and the high frequency start on tig. nothing serious but it will make you wana throw tools for sure

[@MikeOchtman]

Years ago I was assisting a welder repairing grating on a coal silo. One hand on the workpiece, other hand steadying myself on a ladder. I got a good whack from that until the weld made good contact with the main material. Probably only a few tenths of a second, but it felt much longer.

[@davepenprase]

Thanks good vid well done

[@imarichmultimillionaire5509]

Grap a arc gauge rod with wet gloves. It will light you up like a lightbulb. Ask me how I know lol

[@Welddotcom]

Oh no!

[@chrisewing3272]

Ouch! Yeah, water and electricity are a bad combo for sure. While OSHA has no direct regulation against welding in the rain (I mean, people weld underwater, right?) they do recognize water as a hazard while working with electricity, and every safety precaution should be taken when it has to happen. Be safe out there, and thanks for watching!

[@mickymondo7463]

I remember buzzing myself with a big old stick welder through a tower scaffold, welding up some RSC security door frames in a lift lobby, the torch cable was worn and a rub through onto the scaffold with me holding the RSC livened my morning up. I was sweaty and it didn't half give me a kick.

[@galvanizedgnome]

Yea, I've been shocked

[@chrisewing3272]

It’s not the best, but it does happen on occasion. Thanks for watching.

[@welderart81]

Very nice Vidio and information brother thanks

[@chrisewing3272]

You're very welcome. Thanks for watching.

[@rogerdesousa1451]

“Belligerent observations”, priceless! Good info, thanks