What Is Vapor Blasting? - Vapor Honing Technologies

vaporhoningtec...
Vapor Blasting describes the process of mixing water and abrasive together and shooting it at a part's surface using compressed air. The water creates a cushion between the Abrasive and the Surface allowing Vapor Blasting to leave behind a "Like New" result. In this video, we'll show you several examples of the Vapor Blasting process. This process can be done to Clean, Polish, Remove Paint or Prep for Coatings. If you have any questions about Vapor blasting give us a call at 828-202-5563. Don’t forget to like us on Facebook, follow us on Instagram and subscribe on KZbin. Visit our website at www.vaporhoningtechnologies.com.
Like us on Facebook
Follow us on Instagram
Subscribe to our KZbin Channel: www.youtube.co...
U.S.A
vaporhoningtech...
Facebook: / vaporhoningtechnologies
Office: 828-202-5563
Email: [e-mail]
Tags: Vapour Blasting Equipment, Wet Blasting Equipment, Vapor Honing Equipment, Vapor Honing, Vapour Blasting, Wet Blast, Wet Blasting, Liquid Honing, Aqua Blasting, Wet Blasting for Restoration, Vapor Hone, Wet Abrasive Blasting, Dustless Blasting, dust free blasting cabinet, Automotive cleaning tool, Must have, Automotive, Automotive Tool, Restoration tool, Vapor Honing Technologies, Aqua Blast, Aqua Blasted, DIY Vapor Blaster, Automated Wet Blast, Automated Wet Blasting, Wet Sandblasting, Aquablast, Vapor Blasting Equipment For Sale, Wet Blasting Equipment For Sale, Vapor Blasting Cabinet, Vapor Blasting Equipment, Vapor Honing Cabinet, Wet Blasting Cabinet, Slurry Blasting, DIY Vapor Blasting, Wet Blasting Equipment, Vapor Blasting Machine, Vapour Blasting, Vapor Blaster For Sale, What Is Vapor Blasting, Vapor Honing Machine, Wet Abrasive Blasting, Wet Blasting Machine, Vapor Blasting Cabinet For Sale, Vapor Honing Technology

[@orlandoexporters949]

Can't wait to get our first order to our project manager and make parts shine!

[@andrewgrace4410]

Thanks

[@samsalem2793]

Thank you very much for this sacrifice. Since the ratio of soda to water is 2:8, is it possible to use a solution of soda with a concentration of 20% and use a single pressure hose to remove carbon deposits and oils

[@talalzubari1964]

I work in a marine industry and were looking for better alternatives to water blasting and dry blasting, will this work on steel cargo ship hulls which stretch to approximately 300 meters sometime?

[@ericlotze7724]

Check out Dry Ice Blasting too!

[@joeplaugher6405]

hey bud what’s one of them cost id be using it for my dirt bike parts thanks

[@Marticus518]

Interesting! Will this work for removing dross or slag stuck to molds from forge pressing powder into solid objects?

[@VaporHoningTechnologies]

There is a good chance! We offer free in house application testing if you would like us to give it a shot. We hope to hear from you soon.

[@JC-pn7ji]

My company manufactures investment castings and we grit blast using Aluminiun Oxide. Do you think vapor blasting would be more cost effective and achieve similar results?

[@VaporHoningTechnologies]

Absolutely! Not only will Vapor Honing reduce your cleaning time before and after processing, but it will also extend your medias life by months. Call me today at 828-220-4983, Todd.

[@Genetics1]

in other words dustless blasting in a blast cabinet

[@FavDogBisquit]

Thank you so much is vapor the same as hydroblasf?

[@VaporHoningTechnologies]

Not exactly. Vapor blasting refers to using a pressurized stream of water and abrasive to clean your parts, whereas hydro blasting only uses water and a mild detergent. Hydro blasting is performed at a much higher PSI, but does not provide the same polished look as vapor blasting, as it does not use a blast media. Here is a video on using the Hydro Blast: kzbin.info/www/bejne/hYK5iY2DZd6LfJY

[@looksomewherein]

Like dustless sand blasting