What made the Toyota 2E engine so great? TRD ALL JAPAN RALLY ENGINE? 【Plus personal recommendations】

Hello everyone!! In today's video I will be delving into the Toyota 2E engine, which is by far one of the most underrated and unappreciated engine in Toyota's lineup. This engine is quite a masterpiece especially at time, boasting great performance as well as fuel economy.
Follow me on Instagram:
www.instagram....
If you would like to support the channel here is the link:
www.paypal.com...
Thank you for watching!!
#toyota #2Eengine #toyota2e #ep71 #starlet #toyotastarlet ＃スターレット　＃2Eエンジン　#旧車 #名車 #ゆっくり解説

[@buraotgaming001]

Finally, a video for 2e

[@Cao28Prod]

Hello everyone) everything the author said is quite interesting. But after all, for this engine, you can put the cylinder head on 16 valves from the 4E engine. You just need to change the pistons themselves and waste the cylinders by 0.5 mm, buy an intake and exhaust manifold. Don't forget to also buy a trambler from 4E

[@phongnguyen007]

great video, just found your on search for 2e engine on my corolla. Not so many Japanese automotive channel speak English, rare one

[@JWorldAdventures]

Thank you so much for the kind words!! I do hope that the video was able to help you out.

[@sakhawathossain9664]

I would like to see more about the 2e engine.

[@JWorldAdventures]

Thank you for the comment! I'll try and do more when I can.

[@ThePoisonlab]

Awesome video as always, thank you my friend!!

[@JWorldAdventures]

Thank you so much for the kind words!! I really appreciate it! Have a good one👍😁

[@VolkanTaninmis]

in my university year I had a ee105 corolla sw with 1.3 2e with carb. engine(non turbo). I redlined it many many times for long times. at 189000km it was great. still miss that car and I'm still regretting it as sold.

[@pwnagepilot]

Hi I really enjoyed this video. I'd like to verify if the natural aspirated 2E is an interference or non-interference engine. There are articles that say it is non-interference but forums say the opposite and I would like to finally get clarity which is the truth. Thanks

[@JWorldAdventures]

It's an interference engine, so once the timing belt snaps you will have piston to valve contact. Thank you for the kind words I really appreciate it!!🤗

[@JuanPablo-zq9gd]

The 2e engine deserves more recognize.

[@JWorldAdventures]

Yes!! I definitely agree with that statement!!

[@fraero4eg2007]

Yes, this engine is so reliable, I had one with mileage around 800000km/500000 miles (compression still good) furthermore, when my (Chinese) cylinder head cracked, I drove to the service center on my own, just adding oil periodically :) P.s. but economy of this engine is awful, in my case it’s around 30-40 liters/100km (2.5-3.3km/l), but I think this may be caused by the carburetor solex-21083 from lada.

[@85therealdeal]

23km/L must be from the fuel injected one. If I am gentle on the flat, I can't really get better than 16km/L on my carb one.

[@JWorldAdventures]

@85therealdeal Yes it is from the fuel injected one but with the partial lean combustion system, which had different port geometry and a twin squish type combustion chamber. All things considered 16km/L is still really good.

[@phillipmhlongo8038]

I'm driving a 1997 Toyota conquest 1.3 carburetor how can I keep it in good condition at all times I'm in Johannesburg South Africa I love this car with all my heart

[@JWorldAdventures]

Hello! Regarding maintenance, just keep on top of timing belt replacements, valve adjustments, oil changes, and air and fuel filter changes. And the 2e engine should provide you with worry free reliable service for a long time to come. Thank you so much for your question and best regards 🤗

[@gerardguti7410]

Thanks for sharing, what's the head torque of the 2E engine

[@JWorldAdventures]

Hello there Gerard!! Thanks for the question. And to answer your question, the cylinder head should be torqued in 3 steps, that being 29NM, 49NM, and a final 90 degree.

[@SKSanthosh]

Am curious if there's more info on the All Japan Rally EP71? Sounds like a really underated/hidden car! Should be based on the Group A series starlet racers right? Was it only one particular car made? Or did they made a few dual carb spec for the world rally races?

[@JWorldAdventures]

Thanks for the question. And yeah it's really underrated as a Motorsports vehicle. It's different from the group A cars, even though it fits in the time frame. Mainly back then the All Japan Rally championship had their own rulebook, but nowadays they do comply with FIA regulations. Regarding the Starlet; the late Sakurai San of TRD was the project lead for the EP71, and he had developed it with dual carburetors, a one off camshaft, bespoke exhaust, and engine internals. There was one more car that they developed for dirt trails, and was equipped with a turbocharged version of the 2E engine being the 2E-TELU. It produced at the time just about 200HP in racing trim. I hope I was able to answer your question. Have a good one 👍 😊

[@joaosenna9797]

Hi great video and channel, im thinking of making a similar engine build. If i upgrade the camshaft for a 280 degrees one do i need to change the valves and springs? and is there any risc of the valves colide with the pistons? thank you.

[@JWorldAdventures]

Thank you for the kind words!! Regarding your question, You should upgrade your valve springs in order to prevent valve float with the extra lift and duration that the cam will provide. And as for piston to valve contact, I suggest checking it during assembly, because the deck on your block could have been serviced once or twice during its life, so I suggest checking the piston to valve clearance. And if needed running a 1.4 or even a 2mm head gasket. I hope I was able to help you out.

[@joaosenna9797]

@@JWorldAdventures Thank you very much for your answer, I was already looking to buy a set of TRD valve springs. Gladly my engine block is in good state and was never serviced i think it has around 120k - 160k km, but to prevent it will get a ressurface. Again thank you for your help, greetings from Portugal 👍✌

[@aldousquerubin7974]

Do you have some link/s as to where can I buy a trd/performance camshaft? And what duration is good for daily. Thanks a lot

[@JWorldAdventures]

@Aldous Querubin dbilas-shop.com/en/engine-valve-train/performance-camshafts/toyota/1.3-12v-2e-e/regrind-standard-camshaft/5154/toyota-1.3-12v-2e-e/regrind-standard-camshaft?c=12758 here's a link to get your cam reground to 280 degrees of duration and 9.5mm of lift. I personally recommend this regrind as I have also used it in the past, and it's a straight drop in if your engine is completely stock. But if not I do highly suggest checking the piston to valve clearance just to be sure so that you won't have any problems with piston to valve contact. Regarding the TRD cam, you can sometimes get a hold of them through yahoo auctions Japan, croober, and aucfan. But are really hard to come by nowadays that is why I recommended the regrind. Although if you do end up getting a TRD cam their 272 Cam is highly recommended as it will be good for daily used and will improve the bottom and midrange performance.

[@aldousquerubin7974]

@@JWorldAdventures There will be no problem if I run that on a stock 2e carb? And what other mods can you suggest to go with 280? Want to know the maximum upgrade I can do with my 2e that can still be used as a daily since I don't always run on a flat road. I am planning to use a twin weber 40 dcoe carb or twin mikuni solex carb but I don't know what other mods I need to do for it to be safe to use. Hoping for your kind advice. Thank you

[@JWorldAdventures]

@@aldousquerubin7974 You can get away with using the stock carb, but I suggest against it especially if you live where there is quite a bit of elevation change as it can cause the engine to run lean leading to excessive wear, or worse complete destruction of your cylinder walls. Albeit not to the extent to what you would see on a turbocharged engine, but it's still significant enough to need machine work at a machine shop. As for other upgrades, a full 2.25 inch exhaust system would be good as it would increase the exhaust flow coming out, and it's not too big that would reduce the bottom end torque that is needed for daily use. www.tij-power.com/product_info.php?language=en&products_id=168853 and getting these valve springs are also recommended if you do intend to rev it high or to have peace of mind that a valve won't drop on you. As you have said you did intend on going for a Twin carb setup and doing this along with the cam and other mods would be great as it will provide the necessary air and fuel needed, and it also improves throttle response to some degree as it's like individual throttle bodies. I hope that I was able help you out!! Have a good one!👍👍👍

[@davidwerkhoven148]

Hello do you perhaps know what carburettors were used for the TRD all japan rally 2e engine? Or perhaps more info in general about the engine build

[@JWorldAdventures]

From memory they were twin solex carburetors. But you can substitute them with twin weber 40 dcoe's most of the parts that went to the engine were custom made, and designed by the late Sakurai san of TRD. So not much info.

[@davidwerkhoven148]

Thank you!@@JWorldAdventures

[@50cal974]

Wait, where do you find a trd head gasket for the 2e man?

[@JWorldAdventures]

They have long since discontinued it. But a great alternative would be the Kameari MLS head gasket. This can be purchased online directly from Japan, Through RHD Japan. I hope that I was able to help you out!! Have a good one👍👍👍

[@chowdhurykarim4236]

I need help with replacement of the ECU for the 2E TELU

[@JWorldAdventures]

Hello, are you perhaps trying to change the ECU to a standalone one?

[@chowdhurykarim3673]

@@JWorldAdventureshello. just trying to get the OEM one that came with the car originally.

[@phillipmhlongo8038]

It's a 2E engine