What Makes This Putter So Special?

[@J.C.Firearms]

Can’t wait to get my hands on your putter! Love the videos Gabe!! My father-in-law and I always tune in

[@LetsPlayThru]

Thank you so much for the support🙌

[@jpjake]

I’m digging this putter and hoping to snag it later this month hopefully. One request is to get some more pictures of it on the indiegogo page

[@LetsPlayThru]

Thank you for the suggestion. I will try and get some more photos up.

[@JoshRayMyers]

Just backed this putter! Cant wait to get it in my hands ☺️ would be awesome if you were able to do a touch mark on the putter itself to signify its 1 of 100! Thanks for everything you do Gabe! ☺️

[@LetsPlayThru]

Thank you so much, Josh. It does in fact look like we’re going to be able to engrave the number on the first 100 🙌

[@JMH7799]

Glad you made this video. I had never done anything through crowd funding before ordering the Mere Mortal 1.0. I can't wait to get my putter.

[@LetsPlayThru]

Thanks so much for supporting the project!!🙌

[@bestgolfnoob]

Always wondered about the star!? Thats pretty cool. This is such an awesome project! Thrilled its getting off the ground!!!! 🎉

[@LetsPlayThru]

Thanks Ryan 😀

[@shanewilliams1216]

@@LetsPlayThru I have no clue how people see a star, I see a golf club being swung in like a full circle ........😁

[@Newts65]

Love the look of it and am contemplating getting one, but I’d be awfully hard-pressed to switch from my Odyssey Black series that I’ve been playing since about ‘08. Keep up the great work.

[@tommcnutt2582]

Like the putter but my Odessey at $130 off Callaway site works great! BTW you tout Takomo irons and they are great but if you want to customize them with length and lie angle you are charged for that. Tour Edge allows you to customize their irons without an extra charge and as you shared in a video Tour Edge makes great irons! Like mine better than my Ping 430’s. Need to mention the customization charge played on top of the initial charge.

[@LetsPlayThru]

Honestly didnt know they charged for that, good to know

[@jeff.schulze]

I wish you nothing but huge success in your quest here Gabe! It's a great looking putter and I can't wait to see what is next. BTW I'm a lefty and prefer a mallet style putter.

[@LetsPlayThru]

Really appreciate it Jeff. Someday I hope we can make that lefty mallet!

[@joshuaslovack3594]

I'm In! This looks fantastic....Great job, Gabe!

[@LetsPlayThru]

Thanks Josh 🙌 you are going to love it!!

[@CinemaSteve]

I hope you can have a mallet puuter out by the time I want to switch from my Odyssey White Hot Pro 2.0. It's such a fantastic putter for me now, but wow your Mere Mortal 1.0 looks just like my playing partner's Scotty and I would scoop it up if my White Hot wasn't playing so well for me right now. One day!

[@09Youba]

Thanks for sharing your dream and best wishes.

[@LetsPlayThru]

Thank you 🙏

[@ThePhilPhil20]

Hey Gabe, have you done a video on good golf bags? I saw one on the channel from a few years ago, was wondering if you have any recommendations? Could be an interesting video idea potentially. Thanks!

[@seanmcphie2395]

I’m a lefty. Especially if the $299 price is available once you get enough requests.

[@LetsPlayThru]

I left a link in the description if you want to register your interest for the left-handed model. Hopefully we can drum up enough support.

[@mrjfez]

Left handed also I'm in

[@LetsPlayThru]

@@mrjfez there's a form in the description to register your interest, thanks!

[@jasonparent3925]

When do you think we will see delivery if we ordered one

[@johnsourial4153]

Lefty here looking forward to the opportunity to buy. Just registered. Congrats on the new venture! Big fan.

[@LetsPlayThru]

Thanks so much, I hope we can generate enough interest 🙏

[@tcofield1967]

I do have a question myself for your FAQ page later on. Will there by any different neck designs for later versions of this putter? Not everyone plays well with the plumbers neck style (luckily that is my style) so will there be a discussion on alternate bends for people that use a different style swingplane? As for this putter making a bad putter better. I'm sure it won't. I do think that if someone is serious about getting better at putting (It is my focus over the next six months) then a top end putter is probably a good idea. A good putter won't make a bad putter good but a bad or wrongly fitted putter certainly will make a good putter worse. Personally, if interested I'd go and get fit for a putter style and make sure that this kind of putter is best for your swingplane. If it is then this is an outstanding price for this kind of putter. I dropped 400 on my Mizuno and really like it and it improved my putting a fair amount but that was as much finding a putter that 'fit' me as it did the putter itself. I am lucky, the plumbers neck/Anser style putters are what work best for my antiquated Jack Nicklaus putting style so this should work well. It may not replace the Mizuno but it doesn't hurt to have a quality putter on backup too.

[@LetsPlayThru]

Well said, Thomas. As for additional neck styles, it will likely not happen for a bit. We know this particular design may not be best for everyone, but we believed it’s the best for the most amount of people. Glad this happened to fit your style 🙌

[@guyr7351]

It looks good Gabe, issue for me is I couldn’t spend that sort of money on a putter without physically trying it out. Having said that how about a draw for a putter? $10 a ticket that allows many to have a go where $299 is too much for them. I’d definitely have a ticket hopefully you ship to the UK.

[@LetsPlayThru]

That’s an interesting idea, I’ll ponder it

[@williamchapman1538]

Hi Gabe, I'm very interested if and when you do a Mallet Putter. I have a couple of requests unrelated to the putter launch. 1. Could you please review the Newton Motion Shaft? They are blowing up my social media and I'd like to know if it's good and I trust your judgement. 2. I would like to officially invite you to DFW to do some videos for your travel channel. DFW has lots of courses, some of which are super unique and would be a lot of fun for you and your viewers to experience. I would love for your to come out here!!

[@LetsPlayThru]

I actually have had the Newton shafts for a bit, problem is they sent the wrong flex. I'm hoping to swap them out soon. As for DFW, love the idea at some point.

[@jetdr]

This is a forged, milled Putter. Not a stamped Chinese putter with. Plastic insert! This is cheap for what it is. I have a Scotty, best putters I have ever used, I have ordered one of these, can’t wait to use it! After you get a few Clubs under your belt, you need to have an Arm Lock made!

[@LetsPlayThru]

Thanks so much for supporting the launch!! 🚀

[@robertogarcia2006]

Super excited for this putter. Question, I’ve already bought one online, with starting production about how long is build and estimated delivery Thank you and congrats

[@LetsPlayThru]

Thanks so much for supporting the project. 🙌🙌 90 days is the lead time for production of the limited edition and shipping from Japan to the west takes about 5 days. If all goes well we may have them ready by end of year, but we’re quoting January to be safe.

[@robertogarcia2006]

How can I change my order, I’ve already paid, from 35 to 34 as I’m 5’8

[@LetsPlayThru]

@@robertogarcia2006 I can manually change this for you, not a problem. Could you send me an email stating the change and referencing your order number so I know exactly where to apply it?

[@ooojonooo]

Honestly, would love to purchase it but I personally like my clubs to be as aesthetically minimalist as possible. I don't mind all the stamping at the bottom as I don't really see it but I really don't like the logo on the face of the putter. Would absolutely jump on it if that logo could be moved or removed but, otherwise, best wishes to all the other buyers!

[@LetsPlayThru]

Thanks for the feedback

[@carlosGarcia-xl1ql]

I love the putter.. it sucks I can’t get it.. (braces,homecoming dress’s and such).

[@LetsPlayThru]

Hey, those are all wonderful things happening in your family’s life, Carlos 🙌

[@mikeb1149]

What is so different about your putter that would compel me to buy it? I have a Scotty Futura X7m.

[@LetsPlayThru]

Here's the announcement video with the details: kzbin.info/www/bejne/maDYm4KVnK-NZsk

[@randalljohnson203]

Gabe. Bought the putter. Looking forward to getting it. Question, who does the tip go to? First time purchasing anything like this.

[@LetsPlayThru]

Thank you so much for supporting the launch 🙌 The tip thing is the one thing I’m not thrilled about with the Indigogo platform. It goes directly to them. They shouldn’t call it a “tip” as it infers it’s going to the the creator when it’s not.

[@leecm]

How much better would this be than my Kirkland KS1 putter?

[@surfmike99]

Can you tell me when the putter will arrive?

[@pezza3137]

Hey Gabe, so what's the price in Aussie dollars, any idea's of a price on freight as well.

[@LetsPlayThru]

In Aussie Dollars at the current conversion rate (0.68) it’s $475 which includes the shipping from Japan.

[@pezza3137]

@@LetsPlayThru thanks Gabe

[@tresfenton]

Hey Gabe, did you use any of the footage we shot at Westchase?

[@syoung3602]

Whay kind of material this putter is made feom?

[@LetsPlayThru]

Forged Carbon Steel

[@Mos-Hlub]

Mines in! We’re at 86, are they already starting production? Fingers crossed for an early Christmas present 😂

[@LetsPlayThru]

Yes, the milling machines have been fired up! Thank you so much for the support. You're going to LOVE IT!

[@Mos-Hlub]

@@LetsPlayThru can’t wait!

[@richardmanion6132]

If it's not a Maltby iron set with the Ms in "Mere Mortal" being Malby "M" logos, I don't want it 😂

[@LetsPlayThru]

I'd love to see that happen

[@monkeypawism]

Leave the star. Jeez

[@y.min919]

This is great…. How about the mere mortal 2.0 = a LAB collaboration!!

[@LetsPlayThru]

That would be amazing

[@character1922]

Is this going and staying in your bag??

[@LetsPlayThru]

Absolutely, 100%. I love this putter.

[@neilcaulfield7840]

On Gabe, don't tempt me 😉.

[@steveh2027]

Always get the longest putter you can find. Those extra inches count on the gimmis 😅

[@LetsPlayThru]

Haha, that’s true! Like an extra long driver to get a little more room on those club length drops 🤣

[@kyleleuang]

He's secretly a jostar😮

[@LetsPlayThru]

Had to look that one up 🤣 interesting

[@paulcanting4456]

I am a Lefty, w can I make the order?

[@LetsPlayThru]

Please make sure to hit the link in the description to register your interest. Once we get 50 folks, we will develop the left-handed model.

[@eugenedizon48]

Gabe, how many registered lefties so far? are we good to go?

[@jaym5087]

$300....yall lost your damn minds...

[@wonchoi8663]

I would buy Scotty with that kind of money.

[@LetsPlayThru]

For $299 you’ll be about $150 short of a new one, but you may find a used example.