What mods are needed to out run a Ninja H2 w/ a Gsxr 1000 ?

We all know Kountry has been bullying people in Mexico but everyone wants to know how!!
Check out the list for the ultimate street/roll race bike!!!
Brock’s Performace CT titanium - 2399.00
Brock’s performance lowering strap - 229.00
Brock’s performance lowering link- 269.00
Brock’s performance sprint air filter - 250.00
Brock’s performance mirror block offs - 69.99
Brock’s performance race kickstand - 219.00
Brock’s performance backdated clutch -689.00
Brock’s performance pair block off - 59.99
Moore Mafia ecu flash - 400.00
Dunlop tire- 200.00
Dunlop tire - 150.00
Front sprocket - 30.00
Rear sprocket - 100.00
Chain - 200.00
Be fast like Kountry at Brock’s Performance
bit.ly/42D69Wz
Discount code BigKountry5 saves you 5% and enters you in my giveaway
Get your merch
Www.Bigkountry.shop
Anything you buy automatically enters you in the giveaway for a free sprint air filter for any bike

[@Villepillle]

Love the H2 bashing 😁👍

[@bigkountry]

Lol gotta stand on there neck

[@superboy3633]

@@bigkountry It ended shortly. Why you don't take that race to top end. You will definitely be punished. The H2 is hard to control at lower gears without a extension.

[@bigkountry]

@@superboy3633 well for one the road is only so long, kinda sad that the bike needs all these stipulations to out run a little 1000

[@rt2255]

​@@superboy3633not if you know how to ride a real bike with real power, you know where skill is needed not just a moron that knows how to hit throttle lock. Stick with gixxer even monkey can do top speed runs as power is down enough it takes zero skill. But beware of curves. Those take skills and most street squids ate way to bad to ride in curves. Be safe get gixxer

[@paulwindich8784]

Great setup Big Kountry

[@bigkountry]

I try real real hard

[@kevingray8223]

Absolutely top level content Kountry . Beautiful bike and you spoke to the majority population that doesn’t have 40k to spend on a H2 , but you smoked his ass down the pipe . (Lol love you both and would love an autograph T-shirt my friend . A+ video

[@bigkountry]

Hell yea brother!!!! Maybe if we get to see ya at the track we can autograph them for ya!!!!

[@alex43ko]

13:34 good correction, Mrs. Kountry was ready to get on yo azz 🤣🤣🤣

[@bigkountry]

U shoulda seen her face, like wtf lmao

[@craigslistofprojects3451]

Are you still running stock velocity stacks ? Or using Chris Moore fave carbon smith stacks ?

[@bigkountry]

No sir, I have some custom stacks I had made. They will be on my website later this week…. Hint they are cheaper than carbon smith www.Bigkountry.shop

[@siilko2586]

im on a '23 750. i like roll racing too, i know im not in contention with the 1k, im well aware. but simple stuff as for gearing. could i run a -4 in the back or would i be better off with a -2 sprocket in the back, just wondering. Stock is 17-45

[@bigkountry]

Yea I would def go with a 43 at least on a 750

[@Thebusaman]

Love your channel Kountry!

[@bigkountry]

Thanks for the support man!!! Means more than ya think

[@nickdykstrajr8171]

Do you have Carbon Smith Velocity Stacks. Shorts, medium or tall?

[@bigkountry]

It does have stacks, I forgot them, I honestly gotta get Chris to look up the name of them, someone just sent a set in for us to try out. It was like the first set ever made lol.

[@ZedChop]

That's a nice H2 killer mod list 👌 thanks Kountry ❤

[@bigkountry]

Yes sir, glad to help!!

[@ShiftWork24]

hey do you use draggy? molding my 18 gsxr around your 23’ & the giveaway gsxr Chris put together. just curious what results your or him got 60-130 & 100-150 if you dont mind sharing. TIA

[@bigkountry]

I have one but forget to bring it with me almost everytime. I have been 4.0 60-130 about 2-3 months ago, before A lot of mods. I would guess 3.8 or so now

[@ShiftWork24]

@@bigkountrythanks alot man, really appreciate it.

[@jefflong1032]

Chris Moore ...... Big Kountry said he just laid the smack down !!!! A win for the Bully of Mexico 🤣🤣🤣🤣🤣

[@bigkountry]

Lol I’m da big little brother Jeff

[@jefflong1032]

@@bigkountry ....just do BIG Kountry thangs 😎😎😎

[@jefflong1032]

As a matter of fact ....you might wanna call this the Cartel of Big Kountry show , how to take down your local Mafia 🤔....🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@bigkountry]

@@jefflong1032 lmao I haven’t even thought of that!!! Brilliant

[@jefflong1032]

@bigkountry .....make some t-shirts

[@pw724]

Question: Who flashed your ECU?

[@bigkountry]

What kind of question is that? There only one person to have flash or tune a Gsxr, the fastest man in the world… Chris Moore / Moore Mafia

[@mjb2093]

Okay, now maybe Chris can switch-out the restrictive boat anchor exhaust and tune accordingly, and then strap and re-gear the H2, and then we see how things compare?? Apples to Apples, please......

[@bigkountry]

U know one of them has a power adder right? And a 50lbs lighter rider. U don’t want apples to apples

[@joeljohnson3676]

That's the key! Power to weight ratio. I know that H2 is faster. Take some weight off that H2, get the power level dialed in.

[@bigkountry]

I would certainly hope if you get the h2 to way close to the same weight and it has 50 more hp it would be faster

[@bandanamuzic]

Kountry, what brake pads do you run with the rotor?

[@bigkountry]

Stock oem pads

[@rockies1790]

Did you buy the double winglets that you commented on on Facebook?

[@bigkountry]

I did not, I have some being made out of carbon fiber from Montgomery motorsports

[@RacerRick12]

Base model Gixxer 1k with stock motor AINT walkin away from Chris’ H2 ! Chris was bein nice & givin you the Build Up ! 😂

[@bigkountry]

Yea Chris actually enjoys losing 🙄

[@RacerRick12]

@@bigkountry lettin his bro get the Win is bein a good brother ! 😂

[@bigkountry]

@@RacerRick12 u don’t know Chris Moore then

[@RacerRick12]

@@bigkountry true…Im sure hes a good guy & wont beat up on his brother infront of all the Zuk guys 😂

[@bigkountry]

@@RacerRick12 u give him the chance!! He been out tuning me his whole life. He is just at a severe disadvantage now riding a cow

[@natecote1971]

So I've always used the rear break for wheelie control wth do you guys do? IF YOU RIDE THE STREETS DO NOT RUN A SPRINT FILTER! ONLY FOR RACING!!!

[@bigkountry]

Your supposed to use the throttle to control wheelies lol

[@micahbrown8259]

Good content

[@bigkountry]

Trying my best brother!!

[@jessefpv9217]

I agree with Everything Besides the Brakes. I’d rather have em and not need em. Vs not have em and need em..

[@bigkountry]

I understand lol, I get a lot of heat about the brakes lol

[@pietervanbreda4360]

You sure got some big balls with that brake setup Kountry!

[@bigkountry]

Never had any issue stopping, only way I could see you needing more brakes would be if you were on a road course track, the one rotor would get too hot

[@Living4hride]

Kool video

[@bigkountry]

Thank you!!!!

[@cashlessracing]

Setup setup setup❤

[@bigkountry]

It means more than people think

[@eddiemartinez3954]

Does that work for the 2015 model ?

[@bigkountry]

Some of the mods would, a 15 won’t make as much power as a 17+

[@neilgaming2127]

Hey big kountry I got a question I wanna ask. Why there's no Ducati on drag racing for all I know in MotoGP and wsbk they were the fastest in straight lines. Why in the drag racing and street racing we'll always see Kawa and Zuk dominate. Ppl say the v4 engine is superior and have more power but why on street racing and drag I always see the fastest were Kawasaki and Suzuki? It's like in MotoGP and wsbk I always see Ducati smokes other bike. But in street and drag inline 4 can smoke the v4 bike (Ducati)

[@bigkountry]

They make good power but the clutch sucks in them(for drag racing) and there center of gravity is high, which is good for corners but bad for launching. They make decent roll race bikes but not good at all for the drag strip.

[@djwilliams9842]

Nice when you and chase gonna have yall Battle? I know chase is stretched dough.

[@bigkountry]

Haven’t heard from chase in awhile

[@nickdykstrajr8171]

Thanks!

[@bigkountry]

Got durn Nick!!! You the man!!! Thanks again for the support brother!!

[@southsidexpress]

No ceramic wheel bearings?

[@bigkountry]

Yes it has ceramic wheel bearings, did I miss that?

[@jaybavis5896]

Whats up biggggg kountry. Tell me about the best mods for my 2020 busa big kountry. 😂😂😂

[@bigkountry]

We can hook it up!!! Brock’s performance is the go too for busa stuff!!! Use discount code BigKountry5 to save ya some money

[@jockojockoson9995]

BK out here owning all the Karens in the comments 😂. You’re as mad as a cut snake! Cheers from Australia

[@bigkountry]

Hahah they are so upset!!! And the stuff they come up with is so funny!! There’s really nothing they can say

[@AlexVicente18]

what about yoshimura? better or worst than brocks?

[@bigkountry]

Yoshi makes decent slip on exhaust, but for full race exhaust, Brock’s titanium exhaust is 2nd to none!!!

[@kx501]

I have both these bikes 2022 H2 and 2023 GSXR R. The reason many aspirated bikes sometimes beat a H2 is being able to use full power as apposed to only 50% throttle on a H2 without it flipping you, extend one where its getting full power to the ground no wheel spin etc, and no aspirated bike will beat it. Your bike isn't beating a tuned H2 because of Brocks this and Brocks that.

[@bigkountry]

You’re telling me you’re smart enough to know that a bike with 240 hp will outrun a bike with 190hp?? If you have an h2 setup right with stock wheel base, these are the mods the Gsxr needs to outrun it. Brock’s this and Brock’s that

[@yotes1fan]

No velocity stacks?

[@bigkountry]

I forgot about those, it does have stacks, honestly gotta ask Chris the name of them, someone sent us some to try

[@mosninx]

The only mod you need on your side is CYCLE Specialties 🏆 for the Win 💯

[@bigkountry]

That’s right, 31 year sponsor

[@mosninx]

Hell yea Kounrty you and your Bro Chris Definitely know how to make Bikes Fast..Excellent content 👊🏼💯.

[@antferny420]

All you need to beat a H2 is a G an S an X and a R 😜

[@bigkountry]

You ain’t never lied!!!!

[@HARVBIKE]

How much for your gsxr-1000 Kountry?

[@bigkountry]

I might do a giveaway for it at the end of the year

[@dg8062]

You forgot to mention ceramic wheel bearings?🤔

[@bigkountry]

Your right, I forgot those and velocity stacks

[@nickdykstrajr8171]

No bullsh@#. I was going to send you a message on the "instant gram" this morning. And ask which Brocks pipe you had. Great minds think alike.

[@bigkountry]

Dude!! I have thought of it all!!!! Chris has had everyone of the exhaust and none of them have better fit and finish than the ct exhaust and it makes more power than any other exhaust on the Dyno

[@georgedreisch2662]

Be interesting to cover chassis adjustments, as in what the affects of raising / lowering rear suspension, etc…

[@bigkountry]

I might be able to do a video on that in the future

[@questforknowledge750]

Supercharger would work

[@K-carbon]

The wheels ain't stock are they 🤔

[@bigkountry]

Yes those are stock wheels on the 23 1k

[@georgeclark2554]

H2 is the undisputed 👑 king period

[@bigkountry]

Just on the internet, not actually anywhere they have to compete with other motorcycles

[@notworthit1096]

All of them and then some?🤣

[@bigkountry]

Ooooo yea

[@jordonallison6]

The bike looks way better since you removed the stock decals! where did you get the custom decals from?

[@bigkountry]

Oooo yea, moody blue designs here locally made them for me

[@clayboist]

I'm the 125 pound rider that gixxer needs...

[@bigkountry]

She would be a fast sum bish then

[@natecote1971]

What's with the titanium craze??? It's like a pound difference, you gain zero more power over stainless! And not everyone wants blue and purple exhaust. Personally I went with the stainless, I love the bronze color 😊

[@bigkountry]

The fit and finish is better on the ti exhaust, there are plenty of other great exhaust out there. But if you want the best the ct is the one

[@verlonmason7114]

The Ti craze is about profit. A full Ti, depending on the manufacturer, may weigh approximately 3.5 lbs less than a stainless. Every little weight savings helps, but depending on your application, it can be negligible. You have to ask yourself, is it worth spending +$500 to save a couple pounds when you can spend it on another bike mod.

[@danielresch2975]

Big country just tell them. Drink a can of whoop-ass that's all you needed my brother 😁😁💓💓

[@bigkountry]

You damn right, every morning I have a can

[@bicivanaswegen2077]

Suzuki stays the best bike out there !!!

[@bigkountry]

I been telling these people, this ain’t new

[@thereal_FASTA]

UuuuuHuh 😮‍💨!

[@bigkountry]

Hehehehe

[@Raiden_Wins]

@BigK, did you change out your rims?

[@bigkountry]

Nope those are stock wheels!!!

[@Raiden_Wins]

@@bigkountry Great tips. Thanks.

[@bigkountry]

@@Raiden_Wins yes sir!!!!

[@Motorstyle177]

Gotta save room for the women 😂

[@bigkountry]

Exacto mundo

[@GeneticKing]

Would you like to try your luck with my h2 👀👀👀 I'll even come to yalls spot

[@bigkountry]

Sure come on down with your money, I’m the f*ckin bully

[@GeneticKing]

@@bigkountry your gsxr vs my h2 for how much we can do it today 👀👀👀

[@camblueblack7763]

@@bigkountry looks like you need to put your money where your mouth is big fella. You must be that bully that barks behind the gate when you think nobody can get you but when it opens your lips stiched shut. Thats why you and your brother only racing each other and making these dumb claims because both yall like barking behind that gate where you feel safe. Hit up one of these meets and bark there to see what happens.

[@bigkountry]

@@GeneticKing u call it!! I’m not gonna run out of money

[@GeneticKing]

@@bigkountry you trying to get something goin today?

[@lexluger6245]

Love that little carbon feeeebre winglet on the axle pinch bolts..!!! Downforce...FTW

[@bigkountry]

Shhhhh the Kawasaki guys have those too on there h2

[@sprinklescycles]

🎙💧

[@bigkountry]

Kountry style

[@verlonmason7114]

I get women!! 😅😅😅

[@chaz951]

I ain't like you, I got a woman 🤣🤣🤣. Get em Kountry

[@notworthit1096]

She don’t let you ride cuh?

[@bigkountry]

Lmao, idk how I come up with this stuff sometimes

[@bigkountry]

He is referring to one of my jokes in the vid lol

[@notworthit1096]

@@bigkountry bet, im over here like: I got a woman too i just give her mines thats an excuse to buy another 🤣

[@killingemslowly8387]

To outrun a stock H2, not many but a properly setup H2 the gsxr gets demolished 100%

[@bigkountry]

This was a lowered and tuned h2 with the best rider in the world on it

[@SIDDHANT101]

​@@bigkountrybro you know it's need still do a proper setup of that bike . Its a wheelie monster. While you had fully setup gsxr tuned . H2 is also heavy to ride . But yes gsxr is also a great bike

[@showtime7979]

Correction you got a woman 😂 zukinatoin stand up 💪🏾

[@bigkountry]

I got the woman!!!

[@builder229]

No balls, turbo it

[@bigkountry]

I have a turbo bike also, the point is to go fast with no swing arm or power adder

[@estheranimah618]

🇬🇭

[@bigkountry]

You damn right

[@FirstLast-tx3yj]

You forgot the Rider Mod And a set of huge titanium balls to outrun an H2

[@bigkountry]

Ooooo yea Kountry got dem big ole nuts

[@breaksourav1889]

What u wanted to say about Gsxr haters💩

[@bigkountry]

Oooo yea

[@_TheChristophe]

Re-gearing your bike and racing to 160mph is NOT outrunning an H2. 🤷‍♂️ Stock gearing on an H2 will run to 200mph. Let’s see the race to 200mph. Signed: Salty H2 Rider. (Cause you guys are out here lying)

[@bigkountry]

Lmao, my bike goes over 200 real speed with the gearing it has. We are in 5th doing mid 180s. I feel bad for you guys at this point

[@_TheChristophe]

@@bigkountry waiting to see speed confirmed on H2 dash. 🤷‍♂️ Your speedo isn’t accurate with 41 tooth rear. I get it, you want views.

[@i_am_meeh6998]

​@@_TheChristophe isn't the top speed from the factory stock at 186 across all platforms? So how did you get a h2r doing 200 mph?? I call bullshit on that.

[@youngvicious1017]

@@i_am_meeh6998 Yhe H2r has a top speed of 212mph. A base H2 however is a different story

[@i_am_meeh6998]

@@youngvicious1017 go read up on it again. ALL Japanese bikes built only tops out at 186, that's the GENTLEMAN'S AGREEMENT that all Japanese bike manufacturers agreed upon after the Hayabusa 1300r came out. So no there is no such thing as a h2r doing 212 out the gate.

[@throttleitup]

Weight savings isn't worth giving up the brakes.Stupid ass roll racing in the backwoods isn't real world scenario.Reckless advice.

[@bigkountry]

Well I ride on the street regularly, and have drag bikes that go over 200 in the 1/4 mile with 1 front brake. Some men are just made different bro, just because ur a pus don’t mean I have bad advice, grow up

[@rt2255]

If you have to ask you cannot afford it. Just buy h2 fast handles better looks better. Or stick with squid gixxer

[@bigkountry]

Handles better? Lmao bro speak with ur brain not ur heart.