what roller should I use when painting my walls and ceilings?

[@gabegabriel2155]

Great vid again. Useful info, thanks. Great explanation for loading rollers vs wetting out

[@mattcable6379]

love you and your vids. Really appreciate the time, effort and enthusiam you put into them. On topic - I used to, many years ago, swear by the old Purdy white dove and other short pile sleeves. About 15 years ago I switched to long pile woven sleeves and never looked back. I tend to do high end interiors. I found if i loosen the latex a bit, and roll out well, I can get equally good finishes but save huge amounts of time on loading up. I tried a few different micro fibres...not for me thanks. And I'm sorry to say i 4in whilst cutting in. I went up against a few painter and decorator friends of mine who just strike and roll and I wasn't any slower for it. I will say, however, that as soon as a customer put a lamp in a corner i think it's visible if you haven't rolled out the brush marks... maybe I'm overly fussy 😁

[@ProfessionalPainterDecorator]

I don't think people roll in close enough... now the sheep are all wanting to use 18" roller frames they can't get in close enough. Have you tried the Rota Gold's yet?

[@Johnnygstring]

If you roll into your cutting in then you only need to cut a brush width. Despite your take on new build and contract work, these days the demand for a higher standard is there. Gone are the days of slipping paint on walls. 75% of what I do is new build and they run around with thier nose to the wall. The domestic work is far more forgiving as most people couldn't tell a quality paint job from a shit one. Been pushing a brush for a long long time. ​@@ProfessionalPainterDecorator

[@Johnnygstring]

I use a mini roller to roll away and brush marks, always have. You get better coverage with half the paint doing this.

[@ProfessionalPainterDecorator]

@@Johnnygstring do you think painting a whole house out for £1800 like the Candle Man tells us he gets paid, gets a high quality finish?

[@mrg2384]

going to get one of those 9 inch ROTA woven sleeves tomorrow after watching your reviews.👍

[@ProfessionalPainterDecorator]

Good choice!a medium and a long ;)

[@snodge6770]

Personally I prefer the Hamilton (green) sleeves , I wish they would do a 6inch one, I always dampen them before use too . I've tried different ones but always go back to hamilton, 😊

[@TheWESTSIDE1967]

if you dampen make sure it's spun out dry as you will get an aero / air bubbles finish on walls or ceilings otherwise

[@davewright9312]

I like the purdy frame as it really grips the sleeve... and being really lazy the quick fit/ release on the extension pole is a bonus too...

[@TheWESTSIDE1967]

39 yrs Exp,That's my set up, not found the perfect roller tbh as the Purdy 12 inch roller as with many can roll flat so it looks like an empty toilet roll & won't hold much paint the trick is to roll back as it's when the paint is tacky that it pulls the roller fibres back out & when you reload it will hold much more paint, the frames are good & lightweight but there so many nooks and crannies & a nightmare to clean up, need to start wrapping in cling film as mine need dipping in Nitromoors

[@orbitalforest]

I really like Arroworthy blue stripe microfibres (better than the classics) , put plenty on but leave a lovely finish.

[@scottlstone]

The reason some trade decorators use a 4 inch to roll their paint from brushes is because they use the wider double arm roller frames that won’t enable them to get that close to the edge of the wall

[@ProfessionalPainterDecorator]

nail on the head ;)

[@mrg2384]

usually Phil i wet my sleeves then go outside and spin them,but saying that i will try your method.also when i buy a new sleeve i put it in the washing machine with my painters trousers,when my wife is not around.

[@PBYM79]

Same here, I give all my used rollers a quick clean in the kitchen sink and into the washing machine with a drop of fabric softener. They come back good as new and smell divine! 😂

[@alexthomson7465]

Cheers Phil! I'm an amateur diy and had loads of odds and ends of stuff so I thought I'd treat myself to a load of purdy gear after some research. Tried the colossus long pile sleeve for the first time and did struggle but I do think I could get used to it. I also struggle with paint consistency and can never get the paint to behave how it does for you pros. I slways flatten my rollers and can get hardly no coverage. Thanks for this vid! 👍🏻

[@gary_248]

Purdy marathons for me on bigger jobs

[@scottlstone]

Also most decorators I know use the medium pile microfibre like a “jack of all trades” whether on smooth walls or semi smooth they really don’t bother with the fine or short pile as the finish is not little or no better.

[@jsj381]

Intresting topic. Ive got used to wooster super fab but i do like hamilton sometimes.

[@Monkeyman15687]

Using both the rota at the moment. The one thing you didn’t mention is how quickly you can wash the gold. It’s the easiest to clean sleeve I’ve ever used. Fossa do a nice sleeve called the white star. I use it on lids and it’s brilliant. Purdy frames all the way for me.

[@Painturassoff]

I never have time on a job to take the extra steps in would take to go and soak my roller nap, and nobody does that here. But I'm doing commercial work where there isn't always a sink available. I just do what you do. I put it in the paint.

[@RickyHudson-cj4un]

I just use a worn in 1/4 inch purdy colossus for walls and a 1/2 inch purdy colossus for lids never had any issues can’t stand short pile sleeves constantly loading up and leaving tram marks all over the gaff

[@Butlins14]

Just used arrow worthy 9 inch and mini absolute dream to use

[@TheOlzee]

Arrow worthy classics #1 Picasso #2

[@Butlins14]

@@TheOlzee only ever tried the classics

[@johntansey4755]

Great vid Phil, very informative Would you recommend any of the purdy or wooster sleeves.

[@stevevenus1]

I have tried quite a few over the years and now I only use Purdy White Dove. They come in 4,6,9,12,18 Inch, and a variety of nap lengths. I get a great finish with them. I never wash my rollers out after use. Keep them wet in a plastic bag. I only wash then if the next job is a different colour just prior to using them, so they never dry out.

[@ProfessionalPainterDecorator]

Oh wow!

[@andrewwalker2950]

Gold fleck long pile. Can’t remember brand 😃 used them for years roll out mint

[@bluntyr5gtt]

im currently using the arroworthy classic (blue stripe) roller sleeves, i did use the classics but the blue stripes are just on a different level.

[@paulgrog29]

Two fussy blockes rolller are very good arrowworthy are definitely there with the best brand of brushes and rollers

[@ProfessionalPainterDecorator]

I'm still liking the woven fabric of the Rota Gold. The long pile holds a good amount of paint and doesn't give a heavy orange peel effect with the paint on smooth walls.

[@paulgrog29]

@@ProfessionalPainterDecorator I also think you can’t go wrong with prodec ice fusion rollers to been using lick pro paint on offer at them moment the white is lovely

[@SimonPowell-o6c]

Good evening Phil another good video in the next couple of weeks going to paint Sach windows but the putty has got cracks in but solid what can I put on top of the putty cheers simon

[@ProfessionalPainterDecorator]

Toupret do a putty, but check re coat times for drying. In this heat, it'll dry quick. They also do a Toupret wood filler in powder form you mix up. That's quick and easy to apply to cracks in putty and I also have used it to replace old putties. I'll worry about trying to remove it when the time comes lol You could run some interior/exterior caulk in them if not too big Or use TimbaBuild or Repair Care putty system. But it's not cheap and can be messy

[@geoffreymeare3406]

Surprised no mention of Hamilton and Purdy rollers ?

[@ProfessionalPainterDecorator]

The Hamilton green sleeve I've not used for a while now... Moved on. They're ok when 'new' but life span isn't great, also don't hold a lot of paint.

[@deekoh3996]

Do you fool around with the 14in setups Phil?

[@ProfessionalPainterDecorator]

nope

[@deekoh3996]

@@ProfessionalPainterDecorator lol

[@johnmcdonald9977]

Where can a D.I.Yer see all of these options? 😊

[@ProfessionalPainterDecorator]

various decorating suppliers.... on lin eyou can google them to see where you can get them .

[@davidsmalley8783]

Rota dualon long pile 15 inch for smashing work out are brilliant and they last forever

[@Djbob8139]

Question from a DIY'er what would you use the sponge rollers you see in paint stores ?..

[@ProfessionalPainterDecorator]

Not for emulsion. The (mini) foam rollers are aimed at oil gloss applications

[@Djbob8139]

Thanks for the reply..@@ProfessionalPainterDecorator

[@markkerswill5147]

Great Video. Can you send me a link to the Rota Premier Rota Finish Refill Sleeve Please. I have the Rota Gold but cant find the Rota Premier Rota Finish Refill Sleeve to finish off the walls. Or Recommend another Good Roller Sleeve for Finishing off coat. Regards. Mark

[@chrissmith841]

I'm just about to paint my living room ceiling ..What roller and nap thickness do you recommend for a smooth ceiling? Thank you

[@ProfessionalPainterDecorator]

Rota Gold Medium pile, I've been using a Rota Gold Long pile this week on a smooth ceiling, using Isomat Ceiling paint, Premium colour and also Johnstones Durable matt. All been fine, it gets plenty on and dries off well. Just make sure your paints not too thick that it dries too fast on you.

[@chrissmith841]

@@ProfessionalPainterDecorator Thank you. have you ever tried Tikkurila Anti Reflex 2? Wondered how it compares to Isomat

[@jayhorsley8282]

It’s rolling tight up. but I use a long pile Hamilton all the time and just roll back on myself and roll it tight. but has anyone ever used the 2 inch rollers ? Are they any good for the architraves?

[@paul_my_plumbs_uk]

Rolled not bowled over by this video phil 🎉🎉😂😂😂

[@paul-fk7de]

Hi phil just done my ceiling i was wondering if you could give some advice on wood filler a have done mdf paneling in hall but just looking for a few tips on filling thd gaps should i be filling then sanding then refilling any small gaps left am using a small scraper ?

[@ProfessionalPainterDecorator]

Yes. Start doing filling after your first primer coat has dried.

[@geoffreymeare3406]

Toupret wood filler is the best I've found (east to apply and sand ) Get yourself a proper filling knife,far better than a scraping knife (far too stiff ) All fillers will shrink a little when drying so using a second fill is always best.

[@NiktheEnglishGreekCypriot]

Currently using Arroworthy Microfibre medium pile on walls and ceilings and same roller but short pile on woodwork where I can, if I’m not spraying with the graco ultra max

[@michaelstojsavljevic8453]

Axus silk touch are really decent! Hamilton green too

[@ProfessionalPainterDecorator]

usedto use the hamilton green, but found they go 'crispy' over time after washing out.

[@BLUEHORIZON-g2b]

What would be the Best roller ? In our Hall we have real good patterned wall-paper. What I want to be doing is to Emulsion Paint it with a light grey colour but still be able to see the pattern, which isn't such a heavy a pattern.. after two coats of emulsion, so what roller would You suggest please ?

[@ProfessionalPainterDecorator]

hi, the rota gold in a medium pile.. a long may be fine as well.

[@BLUEHORIZON-g2b]

@@ProfessionalPainterDecorator Thanks pal and I Will go back and watch the rest of that vid I got fed-up with, may well have been my downer mood tonight, sorry.

[@ProfessionalPainterDecorator]

@@BLUEHORIZON-g2b thats the idea, you can hop back in when you like

[@BLUEHORIZON-g2b]

@@ProfessionalPainterDecorator Cheers buddy and can I say, I did a search for that medium roller and found that Toolstation no less were doing a Fantastic Deal with 10 of the rollers plus the roller itself AND I think nine mini rollers with their cage-roller for A Tenner, Oh and their painters Bucket thingy, not the flat tray more what I've saw a lot on American vids, for just £10.00. Sadly that deal has sold out now. I kept looking and also found instead of 'Silver Line'.... a 'Blue Line roller' DEAL. £24.00 FOR Nine Rollers plus the cage roller AND Nine mini rollers plus the cage roller AND that Bucket thingy for the paint. Question being friend, are these Blue-Line Medium Rollers any good ? (Sorry for such a Long post)

[@ProfessionalPainterDecorator]

all I'll say is, you get what you pay for. If they do all that or RRP £10.. how much are hey made for, what R&D go into mass production like that? google getting these... www.ciret.co.uk/rota?tx_lnsproducts_productsplugin%5Baction%5D=list&tx_lnsproducts_productsplugin%5Bcontroller%5D=Category&tx_lnsproducts_productsplugin%5BselectedCategory%5D=501&cHash=186b01f342e1893784579807bf1149d5

[@marsdencarl89]

Alright folks how much we all charging to spray garden fence panels? Labour only per panel

[@ProfessionalPainterDecorator]

Charge for the job done. Not time taken. How long would you be with a brush?

[@jackwardley3626]

polyamide holds a good amount of paint and is the most durable probs best value for money but do need to give a good wash out though before you use them lots of loose fluff

[@ThePool911black]

Hamiltons or wooster sleeves 👍👍

[@ThePool911black]

Arrowworthy blue stripe also

[@kennethmunro7480]

Any chance of flicking over the birds shite on your fence

[@ProfessionalPainterDecorator]

wait till it rains

[@andrewwaddams1022]

Medium pile.long are too long nowadays and leave too much orange peel

[@ProfessionalPainterDecorator]

You'll be surprised with the long pile Rota

[@badlefthook624]

Wet roller = tram lines. No, no, sir.

[@Woodlandbill]

Lets make it 24 minutes simple

[@janettinkler2204]

That’s easy for you to say 😂 or is it Phil 😂

[@garethwatson7999]

We’re rolling, rolling, rolling……

[@joeyjoejo1234]

24 minutes, way too long

[@AKUBARIKI]

Damn comment