What's In My Pelican? Audio Workbox (2023)

[@kb55123]

Love the pelican build out, definitely will be taking inspiration, thanks for sharing

[@foglebr]

This was a fantastic video that I got randomly served. Definitely got a few ideas for things to add to my studio. Great stuff!

[@curly_]

thx brother, some things got me interested to put in my case ,i love how soundtechs share experience to improve everyone

[@BrianBondAudio]

Any time!

[@Jjdjentertainment]

Couldn't hear you, did you say something about hearing protection?

[@ribstogo12]

Sound guy says WHAT???!!!

[@wb5mgr]

This is a great for purpose tool kit. I would miss my Qbox and a few other odds and ends but its 90% the same as what I carry. Check out the new Klien flip socket nut drivers. You can shrink that husky kit down to basically a single screwdriver with 7 nutdriver sizes and 14 screwdriver bits. It requires combining two of their tools together to make one better one but its worth it. Especially in a flight kit. I love the tek-pak too. Makes the case nice a orderly.

[@BrianBondAudio]

I will check those out!

[@wb5mgr]

I recently acquired the 2ch version of smaart for Ipad that supports transfer function and everything. It was around $60. The single channel version was $30. It works a treat and is a nice complete RTA with export features and support for mic calibration data and external interfaces. Nice interface carryover if your already a smaart user.

[@Bubbleuprubberdown]

Nice kit. I carry the Sonnect Sound Bullet and a Sense Push. The latter for temp/humidity for Array Processing (when working with d&b). I’m looking into the Sonnect SoundWire next.

[@BrianBondAudio]

Sound bullet is on my list of next purchases!

[@MichaelNatrin]

Great stuff, thanks for sharing your kit!

[@RyanMcCusker]

What is the lid organisers ? They’re cool.

[@OlegAryutkin]

Entertaining watch, thanks. A lot of redundancy though. Two leathermans and a utility knife, 3 flash lights.. in my experience when I got too much stuff in the bag I get disoriented

[@Kitzy]

Where did you get the lid organizer? It’s easily the nicest one I’ve ever seen.

[@BrianBondAudio]

I made it myself. It’s a mixture of Home Depot pouches, and a BUBM iPad pouch from Amazon. They are all stuck to the lid with velcro. The main two red pouches have the front pocket cut off to reduce thickness. So if you look on the Home Depot site, they look a little different.

[@christophermullis6390]

Love the setup and especially love the hack on the lid organizer nice work man!

[@R.Guthrie0708]

Where did you get the kydex leatherman holder? Ive been looking everywhere for one for my surge

[@BrianBondAudio]

Amazon!

[@R.Guthrie0708]

​@@BrianBondAudiothanks!

[@pppgilg]

Love the build and your run through, can you tell me what model Peli case this is please?

[@BrianBondAudio]

Hey, thanks for the watch! It’s a Pelican 1510

[@javiermarin6439]

Hello. Great video. What is the model of this bag?

[@BrianBondAudio]

The pelican is a 1510

[@arnomesguich8090]

Nice tool kit. Could you tell me the brand of all the little pockets ? thanks for your help

[@BrianBondAudio]

Most of them are Husky (Home Depot).

[@julesfradet155]

Hello! Could you please tell us which model of pouches you use in the lid and how they are attached? Are they just glued?

[@BrianBondAudio]

Hey! Sorry for the delay. The iPad case is BUBM brand, and the others are husky (Home Depot) they are all attached using adhesive Velcro

[@madsmix]

Nice build. Although it would be nice if you didn't move your hands around so much. Headache inducing! As it is the camera has a hard job trying to focus on the foreground (hands) instead of the static pelican box.

[@BrianBondAudio]

noted!

[@spencerhalse]

Nice video! Curious about the soundtools app on iPad - do you have some kind of interface to connect reference mic to iPad?

[@BrianBondAudio]

Yes. It’s a different interface. I can do a short video on that as well.

[@BrianBondAudio]

It’s the Presonus iTwo. It has a USB A port.

[@thoubias]

I was this old when I realized TRS plug is called TRS because Tip-Ring-Sleeve... Well, hasn't been a problem for me luckily.

[@BrianBondAudio]

You are never too old to learn something!

[@oliverguy3121]

Interested in the foh rack

[@BrianBondAudio]

Video coming soon! Waiting for my Waves Server.

[@BrianBondAudio]

Video just went live! No Waves server as I changed directions with Waves and now run native from my MacBook.

[@natekeyss]

Hey man, quick question - which gloves do you use ? if you do use thanks.

[@timmikkelandersen4259]

What brand is the little pouch with torch, and two pens?

[@BrianBondAudio]

Not sure. I just picked up a generic multitool pouch from a local store that I test fit my items in.

[@hectorramos5887]

woooaaaoo, can you put this pelican in fly ?

[@BrianBondAudio]

It is carry on size.

[@chrisdileo]

Is that trim tape fiberglass or metal? I would love to have a measuring tape with that small form factor, but so far every tape I’ve seen of that size is steel, not fiberglass. I don’t really feel comfortable dropping a steel tape from the bottom of a PA… lol

[@BrianBondAudio]

It’s fiberglass! Super cheap on Amazon.

[@braydenbarriault6879]

Could you share a link to the hold stern for your wave+? Thanks!

[@BrianBondAudio]

Kydex Multitool Sheath for LEATHERMAN Wave & Wave + Plus - Made in USA - Multi Tool Sheath Holder Cover Belt Pocket Holster - Multi-Tool not Included a.co/d/ieip2WH

[@finn5089]

hey! i dont know if youre still active but the pouches of the lid where did you get it i want it haha but cant find it anywhere

[@BrianBondAudio]

Hey. The left four are from Home Depot. The right one is from Amazon.

[@nealpolitan_6th]

Do you check your bag when flying on carry on? Any tips for the latter?

[@BrianBondAudio]

This case checks fine. If I decide to carry on, just need time remove the knives, tools that have sharp edged things.

[@nealpolitan_6th]

@brian I can't see your comment

[@short-tutorials]

How do you keep the bags attached to the lid?

[@BrianBondAudio]

They are held on with Velcro I got from Home Depot.

[@glennwilson8560]

What model is your pelican/what internal dimensions? Thanks for the video!

[@BrianBondAudio]

Pelican 1510! A true classic!

[@glennwilson8560]

@@BrianBondAudio Thanks! Do you have a list of this gear written out somewhere?

[@joeriley192]

Thanks for sharing. Did you build each of the compartments?

[@BrianBondAudio]

Hey, thanks for the reply. Can you clarify your question. Not sure what you mean by build? The dividers are Trek Pak!

[@joeriley192]

@@BrianBondAudio You answered my question as I was referring to the dividers.

[@paperjawa]

Great video, useful information. What is your profession? I could speculate but I am often wrong. How did you get into it? There are other questions but I’ll save those for now. Thanks!

[@BrianBondAudio]

Live audio mix engineer. Been doing it since I was a kid! Started in Theatre.

[@paperjawa]

@@BrianBondAudio thats awesome. I just started running the sound for a bar downtown here. It’s just once a week but it’s a foot in the door. It’s a new set of challenges as I’m used to mixing and editing in ableton. My hats off to the folks mixing live sound.

[@MB97470]

What box do you use to store the earthworks microphone? 1:41

[@BrianBondAudio]

Search Cigar Case on Amazon! There are a lot of options! Hope this helps.

[@ryanwilliams1821]

How did you do your logo on your gear, been tempted to do something similar but stickers didn't seem tough enough.

[@BrianBondAudio]

Hey! I cut vinyls using a cricket. It’s definitely not the most durable. But I can print more at home so I don’t mind changing them every now and the.

[@nicobagazette1316]

nice

[@eddiegutierrezjr6226]

What case are you using for the M23? I’ve been looking for a proper solution to package my two M30’s

[@BrianBondAudio]

Look for Cigar cases! That’s what rational acoustics rebrands and sells. This particular one is: Humidor Cigar Box - Deluxe Cigar... www.amazon.com/dp/B09NQDRT4F?ref=ppx_pop_mob_ap_share

[@lukeryu2629]

Would 14 inch macbook fit to that BUBM pouch?

[@BrianBondAudio]

I do not believe so.

[@abecoulter8550]

is that RTA mic in a cigar case?

[@BrianBondAudio]

It sure is! It works perfectly!

[@gautrix9963]

Hello, what is the reference of you peli? And where you bought the ipad ect storage accessory ? Thanks

[@BrianBondAudio]

Pelican 1510. I am having a hard time finding the same iPad case on Amazon.

[@kwokwhahfung8562]

We can produce your case ,could you cooperat with us?

[@JoseGuerra-ff9zj]

What brand is the power bank and where did you get the dividers?

[@BrianBondAudio]

TrekPak dividers!

[@trevorkola3292]

my flashlight dissapeared twice.

[@BrianBondAudio]

It's the worst!

[@elitdenver269]

This is one of the most complete kits w/o going to details. 20+ min vid on an audio tech's case is too long. 😬