I absolutely love the information my husband provides!!!! I learn everyday from the whole Power Stroke Specialty Team! Love talking to all yall and look forward to some new customers and come on and call me on the Bigg Dogg Bucks! I have 8 left! That's it only 8 to make your truck run another half million miles!!!! I'm waiting on yall
@georgelandrum12573 жыл бұрын
Hi Ty, I emailed to bill yesterday. 2004/80k miles, preventative action for this year.
@tyhewitt48583 жыл бұрын
@@georgelandrum1257 Do you need a Bigg Dogg Bucks special???? Call me if you do ! I only have 3 left 😔
@robertdivany16273 жыл бұрын
Hi miss Hewitt. I have try to called the shop several times but no answer. Is there a Reason why . I guess the shop only conduct business via Emails
@leonardjohnson87863 жыл бұрын
Hi Ty. I emailed Bill about the Bigg Dogg bucks. I hope I made the cut off. Looking forward to Dealerproof my truck.
@tyhewitt48583 жыл бұрын
We actually operate via land line phone and emails. If we don't answer its bc we have customers in front of us or we are already on the phone with a customer. It's just Scott and I answering phone
@redleg9853 жыл бұрын
These guys are great! They lifetime dealerproofed my 06 f250 back in May of 2019. Worth every penny.
@tyhewitt48583 жыл бұрын
Colton that was before I was Mrs. Bill Hewitt but I do remember you bc I love your name !!!
@PowerStrokeTechTalkwARod3 жыл бұрын
@@tyhewitt4858 been tryin to get a hold of this guy but I understand...
@LuisRuiz-sv2mz3 жыл бұрын
POWER STROKE HELP IS THE BEST. HAD MY 2006 F250 AMARILLO EDITION 6.0 with 64000 Miles DONE BY THEM. OUTSTANDING JOB.. Thanks guys. 😊
@Itsa_Mea3 жыл бұрын
The upper spring mount rusting out can happen on any of the trucks with A/C. It's from the condensation drip tube and dryer dripping water on it constantly. That's why the drivers side can appear mint.
@tyhewitt48583 жыл бұрын
Did you SEE the DRIVERS SIDE? I'd love to email you pics.... come on and email me I AM ty@powerstrokehelp.com
@Itsa_Mea3 жыл бұрын
@@tyhewitt4858 The two glimpses you get in the footage it didn't look as bad as the passenger side but I edited my comment based on my experience and living in the NE. My 05 & 06 DRW (180k+ miles ea.) and customers 06 & 07 SRW 90k & 130k miles) all had perfectly fine drivers side spring buckets but all had some rust (not as bad as yours) from the AC drips on the passenger side. None of these trucks were plow trucks. Plow trucks are rust buckets around here. But I'll send you an email anyways and take a look.
@carltrano13253 жыл бұрын
Keep up all your great work Gentlemen👍
@coderedfit3 жыл бұрын
My 2006 F350 is from Michigan and just passed 195,000. I'm having the coil spring buckets replaced next week. The passenger side is roached almost like the one you showed here. Now I can stay up all night thinking about my camshaft. If I'm ever in Georgia I want to stop by and say hi. Thanks for all the info, it's been a huge help.
@cjcox14802 жыл бұрын
Wish I had a mechanic like you for my 04 Lightning, been working on a supercar GT 4v Swap. Big 4L twin screw blower can’t find anyone to finish it. Making me wish I had a Powerstroke! But it’s been cool to learn since I haven’t had any other options. Thank you for all the inspiration to work on these Ford trucks!!
@timothyhaight97283 жыл бұрын
having coffee with my girlfriend now, almost did a spit take. thanks for this video bill! I gotta take a look at those spring mounts before I send the truck! whooweee that is bad news.
@stinger45833 жыл бұрын
Thanks, Bill & Mike.
@tyhewitt48583 жыл бұрын
I am fortunate to work with Bill, Mikey,Scott and the rest of the PSS TEAM...LOVE talking to yall ...I now have 7 left on BIGGDOGG BUCKS
@davidlampe41533 жыл бұрын
Thanks for the video Bill I am keeping my 7.3 a bit longer at 302,000 miles it’s just broken in. Only 700,000 to go.
@sixoh_diesel56623 жыл бұрын
Can't wait for part two
@Nostradamus_Order333 жыл бұрын
Thanks for the info Bill. Makes me glad that I have a 7.3 PSD that runs like a clock.
@EM-fi2qg3 жыл бұрын
Same here. But at 430,000 she's making me nervous. Everyday I worry about those noises.
@derrickporter6793 жыл бұрын
I have an 02 7.3 PSD with 529,000 miles on it with all original motor parts. Including original factory injectors and glow plugs!! Still runs like a top. Just chasing an oil leak up top somewhere!
@bch55133 жыл бұрын
Derrick Porter won’t be the last, but bout time and it’ll keep on running... what all have you replaced? Phone WiFi fiber optic cameras are nice to find stuff too
@krismorey3 жыл бұрын
@@derrickporter679 turbo pedestal o-rings, EBPV assembly, sometimes the turbo compressor bolts come loose. Normal wetting could be from boost pressure leaking and oil weeping out boots and such. Obviously the valve "gaskets" too. The turbo area is definitely something to look at since it's very hard to see back there.
@Clutch_Kick1873 жыл бұрын
Lifter failure took down my 05 6.0 at 188k miles.. Sold the beautiful lariat fx4 4 door for 10k bucks... If I only knew of you guys back in 2012 I would have had my truck fixed.. Sadly there was no one around I could trust to fix it, so I sold it to a local farmer and took the cash and put it down on a new truck..
@hotrod69193 жыл бұрын
Reminds of a truck I looked at years ago for sale years ago owner said ''Now that's a stroooong sounding heartbeat!''
@Nostradamus_Order333 жыл бұрын
🤣
@jimkillen10653 жыл бұрын
I believe that the roller lifters are a maintenance item. In my option change them at some point or wait and see what happens. I always enjoy watching these videos . They helped me fix my friends truck . As far as the push rod length interesting. .. I like premium lifters and change them.out at some point before they fail.
@MoparMadness933 жыл бұрын
Do you have an idea what it takes to change the lifters in that engine. You have to pull the engine so you can remove the rear timing cover, just so you can remove the branch tube that prevents the rear lifters from coming out after you remove the high pressure oil pump. Then after you pull the heads can you remove the rear 4 lifters. The front 4 come right out after you remove the heads
@StoneysWorkshop3 жыл бұрын
Damn Bill, takes a man to put his name on his work!
@mattvanatti95313 жыл бұрын
I've got an o1 7.tree 400k all original...worked everyday of its life...purrs like a kitten
@wild_horses3 жыл бұрын
Those 6.0s and 6.4 s were junk from day one, fixing one is like trying to turn chicken shit into chicken salad.
@johnwickouski1123 жыл бұрын
I've got a January of 2003 f 450 with the 6.0 with a little more than 310000 it came from the Tennessee valley authority I've had it since 2011 I've done the injectors and high pressure oil pump and a few other things but the most important thing that has been done Is service work every 5000 miles oil and filter and fuel filter I do think the head gaskets are starting to show signs of age . service is the key to these trucks lasting
@juanfo73072 жыл бұрын
What's that noise is really good
@fordpowersmoke27253 жыл бұрын
“Just drivin’ along... And now it’s thumpy” -Mikey XD
@garcjr3 жыл бұрын
There were some contractors at my work who had this problem with the VT365 engines.
@tylerswain57813 жыл бұрын
Are those two white duallys from the tale of two trucks fuel economy video still running around? Would love to see an update video to see what mileage they have racked up
@anthony81413 жыл бұрын
I had this exact sound with my truck luckily it was just a broken rocker arm 375k km still going strong.... hopefully for a long time
@davidraddatz3803 жыл бұрын
I was told by a international tech to run 10w30 diesel oil in my 6.0. They did that in the buses they serviced and they had a reduction in cam and lifter failures.
@maxlown363 Жыл бұрын
I had that thumping noise in my 7.3. It was a broken pushrod
@rrcoster3 жыл бұрын
Yup pretty normal old saying goes up north in salt belt it where vehicles go to die aka junkyard if drive every winter
@bobbykirby21213 жыл бұрын
You guys would have a field day with my 06 dually 158k wish I could afford your quality service
@tomberlinman2 жыл бұрын
Are nice liquid chloride that’s dumped on our roads gotta love Michigan
@22goDpeehs3 жыл бұрын
Do 2002 7.3's regularly have this issue or is it 2005 & newer? Thanks again, great content!
@Pahrump3 жыл бұрын
I wonder what that feels like when you log onto KZbin on this channel and you see Bill Hewitt and crew ragging on your truck? LOL
@tyhewitt48583 жыл бұрын
It's feels great!!!!
@sixoh_diesel56623 жыл бұрын
At least you know its in capable hands and its gonna get done right this time!
@dreadedtrader4333 жыл бұрын
I bought my 250 because of Bill
@twowheelstwomany58282 жыл бұрын
I agree it feels good
@mdtransmissionspecialties2 жыл бұрын
Not ragging when it’s facts. People are lazy as fuck
@GaryToland3 жыл бұрын
I'm pushing 275,000 on my 05 dually, I hope to have it done this year.
@Mtothec233 жыл бұрын
Bro im at 372xxx on my 04 and said the same thing last year 🤣🤣😂😂
@StephenBrewer893 жыл бұрын
I’m at 260k on mine. Engine has been out before. I can tell by the lift hooks. No clue when or why. Runs amazing. Got me nervous tho. Do a “where’s that oil leak” cause I have a few and I can’t tell exactly from where. I know I have valve cover seeping, and looks like a glow plug harness leak, possibly bedplate. Would be nice to see how y’all can just look at them based on where the oil is at and determine a leak position.
@coderedfit3 жыл бұрын
Same here. Mine has 195,00 and same kind of leaks you just described. I have some oil in the valley but it looks fairly dry. Def have a d/s valve cover leak and hopefully just a glow plug harness leak. Bottom and sides of engine are covered in oil but it hardly ever drips when I'm parked.
@chadthedrywaller68593 жыл бұрын
there is a very steep exhaust ramp on the oem grind camshaft. and a lifter that wasnt designed for 4 valve pr. cyl. operation.. the 6.4 liter push rod helps but imo the cam and lifters should be replaced on any higher mile motor.
@stevenbrooks12433 жыл бұрын
Bill and Mikey show 👍😎
@georgelandrum12573 жыл бұрын
Emailed yesterday, waiting for a response, thanks Bill!
@tyhewitt48583 жыл бұрын
You got your reply yesterday!!! Check your email and call me if you are ready and serious!!!
@tyhewitt48583 жыл бұрын
Call me you got your email yesterday!!!!
@justsittinhere723 жыл бұрын
It's all the road salt up here in the northeast that eats steel like candy. It's so hard to pressure wash it all out. You really need a lift to get to all those inaccessible areas. I have an '06 E-350 6.0l. Thankfully there's no rust at all and I hope to keep it that way. I also have an '06 Chrysler Town and Country with 244,000 miles that is a total rust bucket but runs great. Go figure.
@Itsa_Mea3 жыл бұрын
That upper spring mount can rust out on any of the trucks with A/C and you won't even know it. East coast salt has nothing to do with it. The condensation is constantly dripping on it from the HVAC box.
@russelljackson70343 жыл бұрын
Right on
@john7365 Жыл бұрын
You can tell Mikey is an excellent tech
@mileage_master3 жыл бұрын
Don’t need big dogg bux with my 7.3!!! 😎
@pugaoscar3 жыл бұрын
Will you guys make a video when you get a van guy in?
@curtlacrimosa27543 жыл бұрын
291,000 miles on my 2005 still purr's . Now, not my daily drive any more .
@Halfdead2113 жыл бұрын
Being from California seeing rust like that just seems crazy
@badass6.0powerstroke103 жыл бұрын
Hey, gotta question for you. My EGR Cooler failed at 81,000 miles, so i pulled Cab did ARP Head Studs and had heads re-surfaced, and had grooves cut for O-Rings, Delete the EGR System, at same time also installed the 6.4 RCD Chromemoly Push Rods, also did Regulated Fuel Return, Airdog ll-4g Lift Pump, along with a KC Stage 2 Turbo, Warren 175/30 injectors, Odawgs s3r Ported Intake Manifold, and also Exhaust and Air Intake Systems. So far I've put about 8,000 miles on everything, and everything A O.K. Also bought Truck Brand New always changed Oil and Filter every 4,000 Miles like Clockwork. Since I've taken so good care of Engine since new and I'm only at 89,000 miles, Should i be worried about Lifter Failure ? Like i said the Shorter 6.4 Push Rods went in at 81,000 miles when the Heads were off. Thanks for your help. Truck is a 2006 Model year.
@ronanderson18163 жыл бұрын
wow!
@vaughndibble45983 жыл бұрын
The joys of owning a power joke
@joecrazy393 жыл бұрын
Anymore updates on your extreme oil change Bill?
@jasongriffin1127 Жыл бұрын
Wow
@clessonhammond53983 жыл бұрын
Mikey seems very knowledgeable how long has he been with your company
@russianball99193 жыл бұрын
hey sometimes it really is just driving along in my first 6.4 (yeah ik done laughing) i was cruising abot 65 thought i heard a knocking noise but its faint when driving truck didn't have any cogging like a 6.0 with a dead injector or cylinder but when i came to a stop sign it was bad but still running kinda ok but i checked blow by well about as much as a cracked piston i figured its already f'd might as well get to where i was going had it towed back to the shop turned out the and injector partially held open and melted a piston no i was not towing but it was running h&s tuning of course but it freed itself up to work no heavy white fuel smoke or anything these things seem to have mind of their own sometimes
@bobt50023 жыл бұрын
So is it good idea to update just pushrods in a good running engine?
@chrislore26813 жыл бұрын
05 S550 the shock towers are in good shape but I had to do the radius arm brackets on the frame
@rgildersleeve54793 жыл бұрын
Could be flood damage too!
@robertmedsker53053 жыл бұрын
I watch the show for a few years now you guys do great work all the way from the 732 the six seven it's always interesting though no matter how good Ford Engineers it there's always some wacky Achilles heel everyone's guilty no manufactures perfect man it is weird you think they could engineer that out before it even left the computer
@onKnowLookWhatHap3 жыл бұрын
You should collaborate with Powerstroke Tech Talk with Arod!! Would be awesome to see some content with yall together.
@bansheerxp3 жыл бұрын
Can you do a video on why you wont work on the 6.7 ?
@christophercharron3 жыл бұрын
What's going on with the F450 in the background with the cab off? Another video? :)
@tyhewitt48583 жыл бұрын
Yall pay attention to the video background!!!!! Love it!!! Yes forthcoming video...be patient grasshopper
@ardenbriggs27143 жыл бұрын
Would a 2010 engine (a 2009 sticker) have the updated push rods from the factory?
@mysock351C3 жыл бұрын
9:50 Sounds like what an oncologist says when the patient isn't listening. "Yeah we know he's screwed, but we can always hope, right?" Of course, like everything else with cars, start your Saturday morning just looking to fix a "small noise", and wrap up the evening with the engine out on the stand to fix something much more cataclysmic.
@jacobalan1233 жыл бұрын
Well my 06' has 284k on it, hope it's not on borrowed time as you say 🤣🤣😳
@hosticktobias19613 жыл бұрын
Yep I dealt with the same thumping. Turned out to be broken off glow plug tip that bent valves and got stuck in the piston. We replaced the engine.
@questjones61813 жыл бұрын
Thought the same thing
@Gustav920693 жыл бұрын
Do you have this problem with 7.3 or 6.0? I have a 2003 7.3 F250 and I wish to keep this truck another 300,000 miles, I plan to have some work on the motor, and that is why I'm asking.
@StephenBrewer893 жыл бұрын
Is the degas bottle completely empty??
@glennlacewell57663 жыл бұрын
how many other diesel techs are at powerstroke help?
@buick350ftw3 жыл бұрын
I don’t even like Fords but Bill makes great content
@TheGMan.3 жыл бұрын
👍🏻
@patrickwelch620 Жыл бұрын
I don't understand how that made the valve stay open. I understand how it ate the cam etc.
@txnrik3 жыл бұрын
got to be a dead jug??????Hello Mikey!
@supremo73563 жыл бұрын
i have the same issue with my truck has less than 140k miles. the dealer wants to do injectors🤔 i wish i knew some good diesel mechanics in Michigan
@nelsonparker87473 жыл бұрын
99 dodge 2500 1000000 miles no engine problems
@jjp11173 жыл бұрын
My 6.4 was making the same sound it ended up being the rocket arms but next time it has a problem it’s getting left on the side of the road with the title and keys above the visor
@wild_horses3 жыл бұрын
If i were you i would trade it now while its still running, ditch it for something better.
@michaelhaiden67183 жыл бұрын
Stamped rocker arm broke
@Fatenarr3 жыл бұрын
Is this problem year specific?
@ifishcatfish3 жыл бұрын
greetings from IL
@curtisf28143 жыл бұрын
Loving my 13, 6.7 205k now and going. Why does manual say 150k transmission fluid change? That is crazy to me. I keep doing mine every 50k.
@hickindustries70763 жыл бұрын
Do a flush every 30, change every 50. Ford says 150 to lower cost of ownership.
@leroybrown98283 жыл бұрын
That truck came from New York... every vehicle comes out in New York looks like that
@tedshaw82913 жыл бұрын
I don’t hear nothing about what the cost of the camshaft failure will lift us would cost
@brentnuckols8663 жыл бұрын
please buy a good camera it would help you help us ..thank you for all you do
@diggindrums32603 жыл бұрын
Moral of the story... 6.0s are a junk motor design and unless you spend a butt load of money, you can't even come close to the reliability of a Cummins. That's why I sold my 6.0 and bought a 6.7 Cummins and now loving life!
@loganhinc13003 жыл бұрын
what if mine has 340k miles
@robertocamacho27513 жыл бұрын
Because if you guys do it I wanted to do the work on my truck
@mwolfer13 жыл бұрын
You guys just don't know your Diesels - That's a 1933 Lanz Bulldog - with 7 spare cylinders! ;-)
@IndiansAuto3 жыл бұрын
Stopping running it trying to ruin the cam?
@Sasquatchmedic3 жыл бұрын
Stock 2009 6.4L 135k and still a monster! Guess I got lucky,
@sixoh_diesel56623 жыл бұрын
Find some wood to knock on QUICK!
@robertocamacho27513 жыл бұрын
How you doing guys you never thought about doing some Finance to the bulletproof work that you guys doing the trucks because Dad out of work and help for a lot of people including myself l 😆
@tyhewitt48583 жыл бұрын
I'm working on that
@christiantomlin40403 жыл бұрын
I have ridden in some nice 6.0 trucks. That said, I doubt I would ever own one myself. Even more so with the 6.4.
@martyheathers35493 жыл бұрын
Thought Mikey left
@johnnahory45953 жыл бұрын
Ok so now you've got me worried. I've got an 04 6.0 with 251k miles I just deleted it and also did an upgraded oil cooler, brand new turbo, I'm in it already enough with expenses. How much will you guys charge to do this as well as stud it? I know you have to pull the heads anyway so there's the new gaskets.
@johnnahory45953 жыл бұрын
Also not getting any oil pressure after doing the delete and cooler upgrade. Think it may just be because I'm low on oil? But if I were low on oil wouldn't that cause a no start because if the HPOP.
@salmonaco0073 жыл бұрын
So a stock high mileage 6.0 that never had heads pulled should be fine
@S.T.A.N.G3 жыл бұрын
I love how u guys can rack up a bill for someone else but I bet if it's you're truck u will just fix what needs done and worry about it later 😂
@psdleach3 жыл бұрын
You need a podcast or at least need to be a guest on the diesel podcast
@keithkaz14193 жыл бұрын
My coil spring bucket looked just like that 😲, same side too. Nj weather
@bigmurph14473 жыл бұрын
Take the spring out clean up the bucket weld a plate on top put the spring back in.
@tonflo13 жыл бұрын
First. Where is grandma's rolling pin??
@richardgrand97733 жыл бұрын
i got 275k on my 7.3 4x4 superduty .. w mild tune 4 inch pipe to back and air cleaner ...i ring the nuts out it everyday ... daily driver ...boat hauler -plow truck...
@IndiansAuto3 жыл бұрын
Lifter
@dannypederson40543 жыл бұрын
to bad he doesn't work on 7.3s any more lol anyone wanna talk bout 7.3s or anything i got insta i like helpin figure out problems
@loganfox94243 жыл бұрын
Man mikey getting old.
@thomasbarlow42233 жыл бұрын
I'm so scared to have these boys run a cylinder contribution test. I hope she's healthy.
@a_drewski3 жыл бұрын
You already know 1 cylinder is going to be down. You could hear the skip when he was cranking it over.
@lizard20063 жыл бұрын
All I see when I watch these videos is someone bad mouthing his customers. These trucks with a good top end are stout, the pioneers like Warren, and Keeter have proven that. With a cam failure like this the customer could of very well been driving down the road minding his own business. Also just because the date on the battery is from a certain year doesn't mean they are bad. The harness looks rough, but is there any lights or codes stored the module? Replacing a entire harness is a little excessive. I might make it as a suggestion since it seems like the customer is proud of his truck. An while you was picking apart the head studs you should mention it could of been someone very skilled and qualified.
@tyhewitt48583 жыл бұрын
Hey LIZARD2006 Why don't you first of all quit hiding behind a " name" Second of all, I personally invite you down to Power Stroke Specialty Buford Ga. to lend your Expertise as none of us know everything. I'll go you one further and personally fly you here and lend you a complementary POWER Stroke Specialty built truck to ride in let me IM TY HEWITT, what FBO ya wanna fly out of
@Garth20113 жыл бұрын
Might be time to obtain a dedicated video camera for future video reviews. This one is not interested in focusing very well. Good to know about those mechanical problems but in the end, they are all likely better off rebuilding the engine complete with the updates and be done with any futures issues. No wonder Gale Banks no longer puts his focus on Powerstroke moving to Duramax.