What's The Best Air Compressor Available Price, SCFM, Quality, & HP?

[@justforkiks29]

Scfm is the measure of air being taken into the pump before it is compressed. Cfm is the measure of air after it is compressed, that is the usable air flow. Ideally you'd want minimum two times the cfm required for your most air intensive tool. And you'd want the largest air tank you can fit in your space and afford. Otherwise you'll burn up the pump from running it constantly and not allowing it to cool down.

[@georgebliss7674]

exactly

[@guyconnell2250]

Price and SCFM at 90 PSI are the main features I look for. Tank size comes next. Nothing more frustrating than finding out the air compressor one "saved money on" can't keep up with an impact wrench or die grinder or filling a tire on a pickup or large SUV or truck. I'd recommend at least 5 SCFM at 90 as a minimum starting point.

[@losmoore3358]

Your comments is very helpful to me. I'm shopping for a combo air compressor with tank, but don't know which to get for intense tools for residential use in my gurage.

[@fettyguapo]

I got that 3 piece craftsman pancake compressor about 3 years ago for home use and I absolutely love it. For everything DIY I’ve done in the home it has done the job no problem. One of my more used/favorite investments

[@JustinDowDIYcentralhighway]

Thanks for sharing! You Rock!! I appreciate your feedback! Cheers!

[@doalex2085]

I have a old craftsman I bought 20 years ago, still kicking loud as hell though! So my next one I get , won’t care what kind it is long as it is quite!!!! Thanks

[@pikachuthegayatheist6215]

If you’re going to Home Depot during Christmas time there’s usually some air compressors on the highway aisle, or in their sales area. If it is on the highway aisle it could be anywhere is in front of the paint department to all the way in front of the construction materials department.

[@RJM_2023]

I Just bought Rigid OF60150HB 6 Gal. Pancake Air Compressor with Power Cord and operator's manuals. At home depot $99.00 special buy. 3 year warranty. So far so good. Had bad luck with Central Pneumatic 20 Gal.

[@JustinDowDIYcentralhighway]

What Happened if you don't mind my asking with the Central Pneumatic?

[@robertoberrios5596]

First time with a compressor. Needs it for tire replacement, tire inflation, torque wheels, kaldan, etc. What will be your recommendation? I will need lines, and hardware needed. Appreciate your feedback.

[@BucktailFishing]

I have that 8 gallon Kobalt compressor. I've been loving it in my home garage. I picked it up on sale last year for $100. It could stand to be a little quieter, I give 1 3/4 thumbs up.

[@RenegadesGarage]

Justin Dow.. Awesome comparison brother.. I have a 220 volt 6hp 60gal Campbell Hausfeld air compressor that I bought from Home Depot in 1994 for $399 and it has been an awesome one. The first few years of having it, it supplied my Speed Shop that I owned with air with multiple air lines and then has been a home air compressor ever since. It has powered everything from paint sprayers, sanders for paint and body work to every automotive air tools possible. The only thing I have ever done to it other than regularly changing the compressor oil is about three years ago I had to replace the pressure switch. It is getting tired so I might have to replace it soon. But then again it has severed me very well 26 years so I think I got my moneys worth from it. LOL

[@vernongraham363]

Now this is the comparison I've been wait for. Good job bro.

[@JustinDowDIYcentralhighway]

Thanks Brotherman. I'm really glide you enjoyed it and hope it helps. Cheers!

[@HaunterMusicDJ]

metobo seems to be the best one of the bunch with best specs for the price and won't have crappy harbor freight welds

[@corbettknowles9942]

I have a 20 gallon husky at the house or 22 gallon husky whatever it is paid $220 for it from home Depot a few months ago it seems to run good as long as you're not running a big half inch drive impact if you do it drains pretty it drains the tank pretty good but other than that I mean no complaints it does what it needs to do the other one I had was a 10 gallon speed air the better part of 15 years it still runs and works it was an oil-free compressor really couldn't complain about that compressor and I'm not real big on the pancake compressor so couldn't answer any questions on those and oh and the other one I'm had over the years was a twin tank Porter Cable it ran good for a long time until I sold it

[@davidwalle5025]

With compress always get the biggest your money and electrical can suport. Lowes and northern tool always have great deals on great compressors. The ir you have is very good. Go the biggest you can or go cordless.

[@budsak7771]

Haven't had a beer over a year but cheers to you with my Arizona watermelon drink! 8D

[@dustinfogg1276]

Thank you for putting time and effort into this kinda stuff. Always enjoy your videos.

[@JustinDowDIYcentralhighway]

Glad you enjoy it! I appreciate your support! Cheers!

[@nitrous07me]

I bought the kobalt 26 gallon quiet tech compressor a year ago it’s great but i have noticed when I use my 3/8 snap on impact it seems weaker than at work in the shop (this is my 1st compressor btw)

[@davidcaddoo3975]

I own and have used both the 4.5 gallon and 15 gallon DeWalt's. The 4.5 gallon "suitcase" style I would say is more suited for construction tools like framing, roofing and flooring nailers. However in a pinch it will run a 1/2 or 3/8 impact. I can usually get all 5 lugs off 1 wheel or break loose some suspension fasteners before it cycles on. More air hungry tools like an air chisel or whizzy wheel not so much, you get a short burst and the tool will use up the air faster than it can fill the tank. I got the 15 gallon upright specifically for my automotive work. I'm a diy guy working on mine and my family's vehicles and its well suited for that level of use. It'll get all 4 wheels off, or some useful air chiseling or die grinding before cycling on. Nice thing on both with the 200 psi tank pressure is getting more usable air in a relatively compact package.

[@matt30705]

watching this video in October 2023 and seeing prices from 2 years ago really makes me want to scream...F.J.B

[@Joe.dirt7909]

What size do you suggest for someone just looking to top of their car tires and full kid’s toys ?

[@JustinDowDIYcentralhighway]

8 Gallon should be find for that.

[@Duey_diditGarage]

Best value the 4.3 Gal Kobalt it rolls super quiet and runs nailers like a champ

[@jimfeaster4837]

I like the dewalt air compressor... I also like the 30 gallon kobalt air at lowes great customer reviews

[@donotrobme9295]

I’ve used the Kobalt quiet tech. Worked great and it was QUIET! well advertised. Not sure about it otherwise. I used it it’s first day bought

[@losmoore3358]

What's the difference between 125 PSI 11 gallons and a 90 PSI air tank ?

[@jordans.2665]

Hands down the best compressor is the one you got at 10% of MSRP at a flea market, swap meat, garage sale or estate sale.. That way you’re not a slave.

[@patcb829]

And you don't feel bad about running it constantly and abusing it.

[@manuelsalgado8510]

What compressor do you recommend to run a 20 ton bottle Jack?

[@BlueSkyHunter88]

I had a 6 gallon central pneumatic pancake at compressor give out on me after only about an hour, took it back to harbor freight, with no questions asked they took it back under warranty, i was able to upgrade to an 8 gallon Mcgraw for around 11 dollars, much happier with it.

[@communitytube8378]

I ended up getting the FORTRESS 27 Gallon compressor. I'm not sure if I'm happy with it yet or not but it seems like it takes way to long to fill up.

[@ifalcon101]

I’ve been looking at that. Do you use it a lot and would you recommend

[@micahhill4786]

I have a Campbell hasufeld compressor 20 gallon from Walmart. It does the job that I use it for and sometime I run a 1/2 impact on it. I had it for almost two years and it’s been a life saver. Oh yeah it only cost me $189 dollars by the way.

[@Frankie_M.]

I have a Craftsman compressor for home use. I recommend dewalt or rigid for construction sights and Ingersoll rand or Dewalt for shop and DIY use 👍🏼👍🏼👍🏼✌🏼

[@JustinDowDIYcentralhighway]

Cheers Brotha Frankie!!!

[@PowerStrokeJude]

I own the Dewalt 4.5 gallon compressor that you showed for $349 and it is a workhorse!!! I got it for $150, awesome deal for me !!! I also own a Craftsman 30 gallon stand up compressor and its good compressor just a bit on the loud side. I also own a small 1.5 gallon compressor that works in a pinch but is mostly used for inflating bike tires and basketballs. I hope this is useful information for you and your viewers dude!!! 🍻🤟✌

[@ckrissckross7361]

Thanks man ima get my dad the 4.5 gal dewalt compressor I hope he likes it 🙏

[@PowerStrokeJude]

@@ckrissckross7361 dude, I'm sure he will like it. I haven't had any issues with mine and like I said it's a workhorse.

[@ckrissckross7361]

@@PowerStrokeJude thanks big bro .. I'll keep u updated on my dad's reaction.. gotta wait till Christmas now haha be safe and thanks again 👍

[@PowerStrokeJude]

@@ckrissckross7361 Great gift dude! I definitely want to know how he reacts. Have a Merry Christmas!!!

[@ckrissckross7361]

@@PowerStrokeJude other question was can u have it with air and take it on the go and use it with out the cord being plugged into any outlet??

[@tribulationprepper787]

#1. Dewalt compressors are just too expensive per cfm delivered. You are paying extra for the name. #2. Metabo 6 gallon twice as expensive as the very same compressor under the Bostitch label. #3. Kobalt is a Lowe's brand. Several videos say these are cheaply made as are most Chinese products. #4. California Air Tools twin cylinder 2 HP/10 gallon oil-less ultra quiet fast charging (10 gal in less than two minutes) 6.4 cfm @ 40psi LVLP paint gun capable upright air compressor MODEL# 10020C. Around $360 at Lowe's online. This was the best deal I found for performance and overall quality at a reasonable price. NOT SHOWN HERE

[@jjohnson3875]

wow, it's $435 now on 12/22/21

[@tribulationprepper787]

@@jjohnson3875 Yeah, And gasoline has doubled in price since Slow Joe and his useless gang took over the White House eleven months ago so what's new???

[@anthonygm85]

I would like your though the IR you have in the back? I'm looking at the one you have or the IR 20 gallon for the house,I'm buying some air tools for the house so don't have to lug stuff back and forth. The Metabo is good if still made like the old Hitachi ones were.i ran twin stack Hitachi for 4 years straight when did remodel work

[@christianservin7635]

What do you think of the rigid air compressor?

[@traviswieser]

C-Aire Compressors makes really quiet compressors with higher CFM than the other brands.

[@heyboss318]

I want to paint my motorcycle... Which air compressor you recommend?

[@JustinDowDIYcentralhighway]

something with a large air capacity & high cfm. I'm not a painter by trade. Hopefully someone else can weigh in on this one. Cheers!

[@r6_tanner]

I would say at least 30 gal

[@shaneintegra]

Holy crap that combo set was a hell of a deal

[@wildchild795]

Horsepower is a marketing number, how much actual power it has is all about Amp draw. If it draws less power, then it doesn’t matter what the HP rating is

[@dustinwray1175]

The best of the best

[@michealrobinson]

I've had the 21 gallon central pneumatic for about 2 years and so far it's been a great compressor, now it is a little loud but for work around the house, and weekend car repairs it works perfectly fine

[@michealrobinson]

@SUPERVERSIAL HVLP sprayers, like those used in body work are not recommended with this compressor as they require more SCFM then the Central Pneumatic 21 gal. can deliver. Now if your doing one panel as a repair, like a door or fender I think you'd be ok. I would still test it before hand to be sure.

[@mrmidnight32]

Top 2 60 gallon for under $500?

[@motov8-garage832]

I'm no professional in air compressors but as far as the best at everything that youve stated, I've gota say rolair air compressors. But when you get into the best quality and very high cfm you pay big$$$ for it. Theres a few others but like I said high $$$. I'd like to save up for the ingersol 60 or Quincy 60-80 myself. That's expensive enough for me. Right now I have the kobalt 60 gal and a 4 gallon carry rolair compressor.

[@hippo-potamus]

I have the California Air Tools 8ga and it’s whisper quiet. I was shockingly surprised just how quite it was the first time I turned it on. The only thing I dislike is the handle is really low and with the small tires moving it around is very awkward on your back. I do need to upgrade to something bigger however, this one is more as a hobby or very light work type compressor.

[@Elipro427]

Thanks for the information

[@JustinDowDIYcentralhighway]

Glad I could help. Cheers!

[@wolleysegap9740]

Justin, did you run your air ratchet and impact off the 8 gallon HF ?

[@JustinDowDIYcentralhighway]

Air Ratchet Yes ( works fine, but will loose power once the air depletes) Impact Yes ( Barely worked on Lug nuts) works great for setting tire pressure, running a die grinder (a few seconds at a time) using a blow gun, and even did ok using an air brush.

[@wolleysegap9740]

@@JustinDowDIYcentralhighway Thanks.

[@baxterpilley]

Really liked the compressors you showed from Harbor Freight. But I’m more of a made in USA guy. Did you see any made in USA compressors that put out 3.5-5.0 scfm that didn’t break the bank?

[@boostaddict_]

We have an old 1950s or 60s DeVilbiss compressor on a 60 ish gallon tank, wouldn't trade that for anything. That being said, it isn't portable lol. Currently looking for something cordless I can toss in my trunk. I don't own any battery powered tools at the moment so trying to get an idea of basically everything so I only have to invest in one battery system, currently looks like it's going to be Milwaukee.

[@jimfeaster4837]

30 gallon kobalt 3.95 scfm 175 psi 2 stage great compressor

[@tanker242]

How is a two stage getting such low SCFM, I bet it's a single stage.

[@jimfeaster4837]

@@tanker242 I bought it at Lowes it was a kobalt 30 Gallon air compressor Model xc302000 Lowes item 905519 Only carried at some Lowes store I sold it and bought A Craftsman twin piston upright model I'm happy with it the same model is sold with huskey name painted black I like a lot....it has two pistons and does require oil but works well so far Now not many Lowes carry that Model now it was made fairly well Hope I helped

[@chalmerelkins8965]

I was hoping to find out what would be the best air compressor out of all the three stores that you looked at for Spraying automotive parts not a whole car or vehicle but A hood or door

[@JustinDowDIYcentralhighway]

I'm not a collision specialist or painter, but I have painted my own truck. I would say large capacity & high cfm. Hopefully someone else can weigh in with more experience in painting. Cheers!

[@JohnSmith-bh8um]

thats continuous compression. focus on cfm/price/tank size. in that order

[@WoodJammer]

Horsepower is absolutely irrelevant when it comes to compressors. It boils down to 3 main specifications. CFM + tank size at the best price. First and most important is CFM. Cubic Foot per Minute. Imagine a small tank 1 Ft wide, one Ft long and 1 Ft tall. One cubic ft. If the compressor is rated 4.0 cfm @ 90 lbs means it supplies 4 cubic ft of air at 90 lbs in one minute to any tank size. This is where you compare price per CFM to get the best deal. For example if one compressor labeled 2hp delivers 5.0 cfm@90 psi for $399 yet another compressor on the same isles labeled 1.5hp delivers 5.0 cfm@90 psi for $300 the choice is easy. If you are using a carpenters trim gun or a singe framing gun then all you need is one of the smallest compressors on the shelf like a 2.6cfm@90psi. If your nailing plywood to rafters using a coil gun you need about 8cfm@90. If your using a luge wrench you don't need a lot of cfm. You need a big tank. If you are sandblasting you need a high cfm compressor with a large tank.

[@jonrusso59]

Quincy has the best one,,,full lifetime warranty and will come to your work place to fix it now too..I own ten of them and won't buy anything else now too.

[@cruizer59]

Good Video 👍. For a small 120v portable compressor, take a look at the Makita MAC5200. Quieter than most, 6.5 CFM @ 90 psi. Small footprint with wheels and folding handle. Home Depot used to carry it.

[@donotrobme9295]

Best battery powered compressor?

[@happycat0411]

If you don't mind buying used buy a second hand oiled air compressor. Most week-ender DIY people like portability so they can use their air compressor in the back yard as well. With that being said, look for an used air compressor that can put out at least 4.2 ~ 5 CFM @ 90 PSI (this CFM will be enough to run most air tools in the home shop) with a 4 to 6 gallon tank. HP is not so important but find something with at least 2 HP and make sure the air compressor is oiled. Oiled air compressors will last forever with minimal maintenance as oiled units can run 24/7 if necessary due to the oiled air compressor's full time oil lubrication system. Ignore any air compressor's 40 PSI rating as this rating is absolutely useless....

[@lvsurfcat8584]

Thumbs up 👍, and bottoms up

[@levimurcer9520]

Kobolt quiet tech 26 gallon worth every penny

[@ramirocruz3414]

Tractor supply sells the IR compressor I heard nothing but great reviews also with the times I’m only using the air compressor as an air gun and for my air hammer everything else electric ⚡️

[@chuckb.5076]

Great informative video. Thanks

[@JustinDowDIYcentralhighway]

Very welcome! Thanks for watching! Glad you enjoyed today's content. Cheers!

[@HaunterMusicDJ]

it's so weird a hobby store like Lowes beats out the big guys and tractor supply is just a slightly better harbor fright lol

[@larryborkstrom3580]

Lowe's be my first choice as well

[@nodak81]

Harbor Freight's selection seemed a little redundant. Nearly identical specs on many of them.

[@jasonfoster8871]

That DeWalt at tractor supply is $550 here in Michigan

[@donotrobme9295]

Best truck bed compressor with engine that’s 2 stage? Thinking about hft with the predator

[@jonrusso59]

You are forgetting northern tools and equipment has a while bunch of compressors too now..

[@JustinDowDIYcentralhighway]

We don’t have a Northern around here 😢

[@allegany485camp]

Just cracked a “Bud” gonna enjoy your video now...

[@JustinDowDIYcentralhighway]

Rock on! Enjoy My Brotha!! Cheers!

[@estebanmoreno1636]

Bro i see a ingersol rand in the back

[@vicpetrishak1077]

All box stores and Garbage Freight compressors very low quality . Quincy air compressors are the best quality . Ingersoll-Rand is a sellout . Do not buy direct drive units , noisy and wears out .The most important is the air tank ( pressure vessel ). ASME American Society of Mechanical Engineers has high standards. These vessels have stamped or tack welded plate giving specifications and year of manufacture . American Made vessels are proven . You put time in your video ,Thank You !

[@evictioncarpentry2628]

There is a HUGE difference in CFM versus SCFM flow rates

[@georgeaugustinewilson2885]

Looking for matabo 6 gll 200 psi

[@tray8411]

HAd a Dewalt a few years ago,,Lasted 6 months. Never again

[@rabbibacongrease88]

It's hard to beat my Quincy 390 at 560 RPM pushing 35 CFM with a 10 horse motor

[@lordrayden3045]

18 cfm? Thst does seem like a lot there...... but wasn’t that the one woth a gas engine?

[@JustinDowDIYcentralhighway]

I think 🤔 so. Craziness never knew they went that high.

[@ramirocruz3414]

Maybe in the far future air compressors will go obsolete thoughts ?

[@JustinDowDIYcentralhighway]

Too tough to call ,but your not wrong. Cordless is only ever getting better. Cheers!

[@LongBinh70]

Not unless you fill your tires with lithium! 🤣

[@alcha93]

Before purchasing a used compressor, look up videos of what happens when they're compromised. Its not pretty and scared me away from even looking at anything chinese or generic.

[@ridin_low193]

If you know what your doing and know what to get Home Depot is much cheaper. If not Lowe’s has bigger selection and the people are much more helpful.

[@tedp7773]

PastachiO!

[@pastorquangful]

Kobalt 8 gallons are trash. The regulator literally fell apart after 2-3 use. It was primarily used for airing up bike tires and pool inflatables. No air compressor tools were ever used on it. There is no replacement part for it either. So, stay away from Kobalt air compressors. BTW, I'm not the only one. Their reviews backs up my experience. Good luck y'all.

[@abelmejia2803]

Where is the fortres 5 gallon

[@jimfeaster4837]

Fortress has returns !

[@mattaldrich7660]

Fly Eagles Fly

[@johnbethel9369]

👍⭐⭐⭐⭐⭐💯

[@keithsummers3112]

I r is best

[@ronradmer3573]

You never said what you feel is the best compressor

[@ganeshnarayan5505]

Ok i no this is an old video But whatever you do DO NOT buy Husky air compressor they are piece of garbage i had bought 2 of them within a 1 year and half. they both broke.

[@lordrayden3045]

That 8 gallon kobalt goes to $100 f you pay attention

[@renesalcido7522]

Free ron jeremy

[@christophermiller9624]

Your friend don't talk mush .He just sits around watching you work . What a stiff.

[@donotrobme9295]

Cfm v scfm what r they talking about

[@eliezerramosjr1017]

Cubic feet per minute=CFM Square cubic feet per minute=SCFM which refers to the the amount of short spurts of pressure per intervals. Hope that help and understandable. God bless

[@NoMastersxNoKings]

@Donot Robme Campbell Hausfeld has a great description of the difference on their website. Try googling “cfm vs scfm,” it isn’t what Eliezer says it is. Not even remotely close, not sure where he’s reading from.

[@donotrobme9295]

@@NoMastersxNoKings thank u!!!

[@scottfirman]

DO NOT BUY FROM HARBOR FREIGHT

[@concrete981]

harbor freight Chinese air compressors , especially their motors are a joke. buy a dewalt.

[@nodoubt46able]

these are all junk, trust me....throw away ....life of 100 hours or so......buy a rolair compressor....they have a motor rated at 5000 hours.....do the math.......