I drove one with a Cummins. 1990 Stripped down: no a/c, no heat vents just heat on floor and defrost. Was 4x4 manual transmission and drove like a tractor. Pulled a goose neck like a champion was always reliable,
@michaelcuff57807 жыл бұрын
Dude! All that crap your saying is really nothing compared to the age of the truck. Usually those trucks are rusted out, used and abused junk! That truck is in great shape!
@nevileasterling6486 жыл бұрын
Good shape? It has rust so bad it has a hole in it! You must be from up north, because there is no way in hell you'd be able to sell a truck with that much rust in Texas for more than $4k. Here, people get freaked out when the clearcoat wears down, when really all that needs to be done is just have it reapplied. Call me picky or spoiled by not having to deal with rust since I live down here, but I have zero tolerance for that on my vehicles.
@abutler76285 жыл бұрын
Yeah you should see the kind of trucks we deal with in the snow belt...the trucks of this year usually rotted around the motor...and guys still try to get 10k for em lol
@Mister5point562 жыл бұрын
With the exception of the parts availability I own 3 70s ford trucks all with the same issues…the rus too all truck from that decade rust
@williammoreschini44685 жыл бұрын
The first thing your gonna want to do is check out the box corners, there should be nothing left, next your gonna wanna check out the door panels, make sure they are held on by wood screws. The headliner should be non existent at this point.
@cash2.04 жыл бұрын
I sold my 89 W250 last year when I upgraded to a 2006 5.9 325cr. My 1st gen advice is to be understanding that they are not going to ride like the newer ones. Mine was noisy and rode like a dump truck. The 3-speed auto trans with non-lockup converter was not so good for highway speeds or for getting the power to the wheels. Get a 1st gen if you like nostalgia and cheap/easy to fix. I would suggest avoiding the early automatics. The one I had used 3:07 gearing which was a compromise for not having a 4-speed OD automatic. Lots of little issues with interior items. My rust-free 1St gen sold in 1 hour of being listed. I would still have it but I needed a crew cab. It's hard to drive with a 165lb Great Dane in your lap. My 3rd gen does things my 1st gen cannot but it will cost more when it needs work.
@jakegregg71535 жыл бұрын
Thanks for making this detailed video of things to look for. I'm hoping to own a first gen Cummins or second gen soon and this gives me ease of mind of things to look at so I'm not shooting blind.
@easytopleez335 жыл бұрын
My 91 still runs and drives perfect. With over 300,000 miles. Gotta be diligent about maintenance. But, that could be said about any truck for that matter.
@AlejandroP1980s5 жыл бұрын
Hey where can I buy the ram logo for the hood also I want to put the bighorn logo for a 92 Dodge Ram 250 LE
@austindreyer29306 жыл бұрын
Why i love my 1985 Dodge w150 Power Rams Hand Crank windows
@truckman636 жыл бұрын
I've owned a few dodge trucks ranging from 75-81 and all of them have rusted in the same exact spots. I'd have to say you're right on with the what to look for one thing I'd add on is behind the seat right where the bottom cab corners are, all of mine had that rusted completely out.
@bigbossman59695 жыл бұрын
of u owned that many of them why didn't u rust proof the areas u know is going to rust
@Kaizer3572 жыл бұрын
@@bigbossman5969 Majority of ppl unfortunately are either lazy or don't have the time. Which I can understand but if anyone with any vehicle especially a diesel; doesn't maintain them, they'll go to shit but they'll try to sell it for way over what they're worth....
@sadboycali4 жыл бұрын
I was very lucky with my truck. The only thing that rotted was the floor rockers and wheel wells that's it. Everything else was in great shape. The window seals were old cracking and falling apart and inside the door there is no rust. I love in Utah where it snows so I think I got very lucky. Already fixed the floor as well as replaced it with all new weather seals on the doors other than the vent Windows which they don't make yet.....I've been in contact with a company that are in the process of making them but because of the virus it has slowed down. I have a 92
@canammaverickx33735 жыл бұрын
Really miss driving these old Dodge pick ups my father used to have one wish I can drive it
@justriley91573 жыл бұрын
so happy i hve this truck and everything your caring about im not even noticing, all i care is that the seat is torn to shreds and the engine needds a tune up.
@rondellschuyler70744 жыл бұрын
From my experience. When it comes to the body, most body shops that do quality work will charge you at least $5,000 to do an all-over Quality Paint Job in urethane. Maaco is good, but there is shops that are far better, that use better materials. Dupont Imron is a excellent paint for trucks, it is a fleet style paint that can be color sanded and buffed to a very good shine. Imron is tuff durable paint. It will be difficult to find a shop today in certain states due to EPA laws that are willing to use a paint like imron that is that toxic. For quality paint job, a very good shop will pull the window glass, the seals, the trim the bumpers, everything to make sure that the paint adheres and doesn't peel. The biggest mistake I see people make on cars or trucks back then or even today is they do not rust proof the vehicle. There is no reason to spend a lot of hard earned money restoring a truck or a car even as a daily driver if you're not going to rust proof it. You are just wasting your money. Everything will need to be rust proofed. The underside of the body, the frame, the brake lines and even the insides of the bumpers and up under the wheel wells and even inside the doors. A good rust proofing job from say Ziebart, unless they' are having a monthly special, will cost you around 350 to $400 and it will be well worth it. If you like these trucks and you can do some of the work yourself you will save a considerable amount of money. It all adds up. 10 thousand dollars can be easily spent. Have fun. Cheers
@bradleyhannah87133 жыл бұрын
Wiring on these years is a nightmare, I have a Ramcharger try to find parts for that.
@dragonboypayne213 жыл бұрын
You're right
@wideopenthrottle67867 жыл бұрын
up here in alberta, you have to get lucky when it comes to finding rust free trucks, cant be picky about everything you listed haha
@wideopenthrottle67867 жыл бұрын
masterofnone Yeah, if I lived below the rust belt, I would be. Once you start paying north of 10k for nice ones, then you pay attention to the small stuff. Beautiful truck by the way
@Meal_Team66 жыл бұрын
You still listen to cassettes LOL!
@michaelwisor44426 жыл бұрын
I want to see it run
@rowdyhick15256 жыл бұрын
Yup i go to BC if i want a non rusty truck. Trucks are fuckin beat out in Alberta
@ljbrizo3 жыл бұрын
I HAVE ARUST FREE 91 250 5x4 5 SPEED, PAINT IS LIFTING BUT ITS NOT BEAT UP AND NOT RUSTY, HAD A MAN OFFER ME A 2013 350 DUALLY 4x4 STRAIGHT UP TRADE, I PASSED
@swskitso7 жыл бұрын
I just traded for a 81 d150 with the 225 slant 6 the grill frame or shell, or whatever you want to call the chrome surrounding the headlights and grill, it is far harder to find on the older models with the single piece grill. it is not being reproduced like the grills with the 4 inserts
@bearsrodshop70674 жыл бұрын
Thx for sharing. Bought an '92 D250 base model few months back (June 2020) with 115K miles, 360 TBI. Sat 4 yrs, so tank cleaning was a must, and new fuel pump, Injectors, all the rubber line ends, ect. Now taking time to redo the interior, but had a dash with no cracks, a big pulse. If you care to see, please watch and subscribe to Bears Rod Shop. This will become our shop truck, so old tree sap pitina will remain, but have a right front fender to straighten. You mite like have I plastic weld and restore the interior trim and headliner recovered. Yes, wish it had a 12 valve cummins, but was to straight to pass up, and under $1K money,,,,Shes a keeper, and always been in TX, so no rust issues. Bear
@andreranch61616 жыл бұрын
Nice tractor
@deddie46456 жыл бұрын
So pretty much when I seen my first one in 1992 the consensus was that Cummins will Outlast 3 Dodge bodies I guess it was pretty accurate
@tannersolano23647 жыл бұрын
My windows in my 93 roll up like there on crack like it's very fast
@andreyzagoruyko53906 жыл бұрын
Same here; drivers is quick, but passenger gets slow in the middle.
@zanefitch93435 жыл бұрын
Silicone lubricant will fix that 👌
@kowboykennyware4 жыл бұрын
or a new motor
@dc_rubberduck69704 жыл бұрын
Andrey Zagoruyko sane I can’t figure out if it gets tight somewhere and binds or if it the the motor
@Sunde534 жыл бұрын
same here
@anasasisxenophontis7 жыл бұрын
man i really need to get one of these before they're all gone. been wanting a w250 for years. thanks for the info.
@tapethegrape81954 жыл бұрын
My father has an two tone brown 89 Dodge ram 250. Short cab long bed with only 55 thousand original miles. It used to be a farm truck it's in very nice shape
@tapethegrape81954 жыл бұрын
kzbin.info/www/bejne/hGq5inWdpM6Xpck
@bradleyhannah87133 жыл бұрын
Try finding parts for a 1985 they Dodge guys changed all the wiring the seals turn to stone, I finally have all the window gaskets. STEEL rubber parts. Ebay has tons of stuff its real easy to find parts LMC truck has lots parts, Brads mopar. I shit canned all the window parts put in aftermarket switches which solved the problem. I have always been a MOPAR guy so finding parts is easy.I rebuilt the heat box itwas easy to take out I dont recomend the cut the hole deal . You will still have to remove the box to replace the evaporator and heater cors. EBAY has all the retainers and fastener. There is no problem finding parts. especially for the 86 up try the 85 and older.
@bradleyhannah87133 жыл бұрын
I have a 85 too I did find all the rubber parts for the doors and the lift gate. Some stuff ya just cant find I was surprised to find Ebay has used parts.
@FirstGendodgegarage Жыл бұрын
my friend just purchased this exact same truck down to the color way
@briangil21636 жыл бұрын
My dad's 1990 1/2 ton had the same cab problem above the windshield but the 318 ran great
@rodcumpson98726 жыл бұрын
I have this exact same truck in Ontario it’s a 1991 never winter driven and same paint. Nice.
@dontjh84486 жыл бұрын
In the market for a 1st gen 318 ram this video helps
@jameshuron80775 жыл бұрын
After market grills don't say DODGE on them, cabs are basically the same from 81- 93 , replace the window motors, they will work fine
@JakeLashaway10 ай бұрын
I love my 1992 Cummins
@novidsheremovealong18936 жыл бұрын
Gorgeous truck man!!! I got an 86 dodge ram with a 318 gasser, but mines solid, and im really happy about mine, but i still have a few things to work out, anyway, good lookin truck
@Kaizer3572 жыл бұрын
Can't agree more. Got an '83 D150 from CO. Mostly rust free except for the one rocker and shit exhaust and manifold which I'll need to replace quite soon. Not happy about it but hoping I can get stainless steel for the exhaust at least....
@bigbossman59695 жыл бұрын
u need a new window regulator most power windows eventually do that
@ritzzcarlton1335 жыл бұрын
Agreed
@michaelcuff57807 жыл бұрын
Yea i want a second gen with a 12 valve. You cant find a good one of those for a decent price.
@AMCguy5 жыл бұрын
Cummins deal is what saved Chrysler. Best powerplant ever. But the rest of the truck is typical cheap chrysler junk
@npp35594 жыл бұрын
You prolly never even seen a truck like that irl just some keyboard warrior
@andrewsully73433 жыл бұрын
Where you get that ground cup holder at?
@scottchapman80445 жыл бұрын
hey man talk about the real important stuff like the (Killer Dowel Pin)!!!!!!!!
@samlavalle84657 жыл бұрын
Where at in Michigan? I have the same truck in southern Michigan
@vollickplaysgames6 жыл бұрын
michigan here too, kalamazoo but not a oil burner
@jobehmoore90225 жыл бұрын
You can get the tailgate plate on far from stock
@TheMcGuireLife4 жыл бұрын
It’s 2020!! You Still Listening To Tapes?
@FirstGendodgegarage4 жыл бұрын
i am
@Jay-un2zc6 жыл бұрын
Is there Haynes manual for these?nice truck man!
@aeroe21444 жыл бұрын
Theres one that coveres all models all years from d/w100 to 350, it says 1974 to 1993 but really it's 72-93.
@alexanderbrooks74716 жыл бұрын
Who did you go through to get parts for the truck and what online store are they because i need the badges and a driver side vent window interior completely done and front end and fenders
@augustbuysse49474 жыл бұрын
I wish I had that truck
@jesseaguilar35744 жыл бұрын
Do u know we're I csn find hard plastic lists
@larryverhaag3022 Жыл бұрын
Good truck I have a 1990 5.9 in better shape than yours ( yours is good ) I do not know what transmission is in it I have 234.678 on it scary good condition its been kept in a garage ( thank you for yor time )
@erica-lillycrider10884 жыл бұрын
I would bet a guy like me in the past had a CB radio mounted on the dash with sheet metal screws yeah I'm cheap
@USMC_BABE382 жыл бұрын
I want one
@realmccoy95975 жыл бұрын
Aftermarket sheet metal is soft non fitting junk buyer's beware! Find OEM parts.
@Maravilla2094 жыл бұрын
Do you know what year highlander that soundsystem headliner is from?
@texican403 жыл бұрын
Are the motors pretty stout? I been looking at dodges and was thinking of getting one for the ranch
@dirtdiggler92933 жыл бұрын
You should not have to ask if you own a “ranch”. Yes, very stout engine.
@ronaldadams48015 жыл бұрын
Thanks for the tips. I am looking at importing one of these trucks to NZ in a years time from now. Are you ok with checking one out for me if it is your area before I fly over to pick it up?
@heroshotlgn5 жыл бұрын
I wouldnt even fly over if I was you. I'd just hire an inspector, then let the shipping companies do their thing
@Kaizer3572 жыл бұрын
@@heroshotlgn Yeah right, pay a shit ton for shipping....anything cross country will cost minimal of $2k.
@joelovelace91324 жыл бұрын
Hey can anybody send me a video on how to rewire a 97 Dodge pickup truck I got tail lights I got running lights in the front I just ain't got no headlights
@brushcountry36046 жыл бұрын
Would you happen to know where i can find a manual window regulator for a 1992 dodge D250?
@Kyle_Godfrey1115 жыл бұрын
Brushcountry360 why would you put a stack on your 1st gen?..
@salortiz35284 жыл бұрын
The only good thing about these trucks are the engines. Everything else is built very cheap
@Garandmasthumb5 жыл бұрын
Just bought my 93 w350 in excellent condition for $3200 5spd 4x4 1 owner! What do you think it’s worth?
@doityourself38255 жыл бұрын
Keith Walker extended cab?
@Garandmasthumb5 жыл бұрын
Yes
@doityourself38255 жыл бұрын
Location?
@Garandmasthumb5 жыл бұрын
Fort Wayne Indiana
@heroshotlgn5 жыл бұрын
But is it a cummins
@11122233331116 жыл бұрын
its called a cowl
@skylarfreeman80977 жыл бұрын
Do you like the sound system setup? I was thinking about getting it.
@Mun562037 жыл бұрын
were do you even get it?
@skylarfreeman80977 жыл бұрын
Midnight Slamjam lmc truck
@justenough7306 жыл бұрын
my favorite sound system in a Mopar is the engine
@moultonditcher61875 жыл бұрын
You can end a lot of bullshite by oil spraying these vehicles every year,i have no idea why people buy brand new vehicles and refuse to pay 150 a year to krown it.i guess they just have a lot of money.
@jameshouseweart6 жыл бұрын
partsgeek.com has SO MANY parts of this truck... can it a look some time
@dan34286 жыл бұрын
Cummins engine crate
@nevileasterling6486 жыл бұрын
I wish they started making 12v crate motors
@con31865 жыл бұрын
Nevil Easterling they do just gotta pull off the dodge box off around them that they come in
@awsfernandez634 жыл бұрын
Plastic fuel tanks. Rare and expensive
@PrinceGatez6 жыл бұрын
I know a guy to sells tailgate badges
@austinreeves91125 жыл бұрын
Wow. All I have to say.
@bababooey75765 жыл бұрын
First, check for a disposable bit of metal, rubber and plastic surrounding the engine, called a dodge or ram or both If present, dispose of this rubbish then install engine in a relevant platform.
@npp35594 жыл бұрын
bababooey7576 take your comment and shove it up ur ass
@charlesgilbert79076 жыл бұрын
Lmao if you buy door bushings you dont have to slam the door my 84 doors still shut like new and thats all four!!! Finding parts is like finding a needle in a haystack you just buy and keep when possible!!!!!!!!
@piledriver2396 Жыл бұрын
Your grill is not OEM. It needs the dodge badging. There hard to find.
@dmenace96114 жыл бұрын
Lol its a ol 12 just drive it
@leonwilliams32125 жыл бұрын
I know exactly where he can get all this shit lol
@dylanhuff75654 жыл бұрын
Where? I'm about to buy one.
@leonwilliams32124 жыл бұрын
Dylan Huff I’m talking about getting the parts not the truck it self but it’s lmctruck.com
@dylanhuff75654 жыл бұрын
@@leonwilliams3212 Me too.
@vmaxes4 жыл бұрын
Watching this was a waste of time...
@newlion70136 жыл бұрын
If it wasnt for the Cummins engine, dodge wouldve been done years ago. Man what an ugly truck that seemed to always be behind the times & cheap!
@npp35594 жыл бұрын
New Lion compare that to a 93 ford or Chevy and tell me which looks better if you say ford or gm u got issues
@slipshot406 жыл бұрын
Haha. I owned these trucks new. You can have them. Lol