What You Need to Know About The Advanblack ST Fairing

[@joejunior1974]

I've had this fairing about 7 months. No regrets. I installed the rockford fosgate audio system, which is expensive but great if you like music. I wanted to let you know that if you do get this audio system, the screws that advanblack uses to secure the windshield won't work with the rockford unit. Advanblack may have changed this. But if not, harley sells them for $16 a piece x 6😅, just go to the hardware store. I think they are 10 24 coarse thread $4 for all 6.

[@IronBornRider]

@@joejunior1974 thanks for the tip! I may add it on in the future

[@markoconnor9865]

Is the Rockford audio system plug and play with the low rider s?

[@joejunior1974]

@markoconnor9865 I would assume your install would be the same as on a lowrider st. I've watched several videos for that install, and it looks straight forward. Only tuff part is opening up the connectors to remove the little white plug HD puts in the blank holes. You can definitely do it yourself!

[@cesarromero8187]

Have you had any issues with the bushings that go on the windshield?

[@joejunior1974]

@cesarromero8187 yes! The ones that Advanblack sent me were trash. I hope they have changed them by now. I bought a Clearview windshield that came with much better fitting bushings.

[@ms.advanblack7687]

Thank you so much for your review. It was very informative. We appreciate you!

[@IronBornRider]

@@ms.advanblack7687 thank you!

[@tnhunts2759]

Speaking of the fairing flex...lol Broke the bottom two body trim clip mounts for the upper windshield insert on my Road King Special. To Advanblacks credit, they did warranty out the inner fairing and overnighted a replacement inner so it was rectified within a week, but 2 months in it was a little disheartening. Personally, I'm not sure it was Advanblacks fault, as the design is almost a direct pull from the Harley example, the trim clip design just seems a little light duty, especially for crappy Wisconsin roads. My solution? Get the stereo, as it ties into the inner steel support plate and braces the entire top side of the fairing significantly more. If the stereo is out of your budget/bike setup ideal I'd suggest fabricating a support plate that utilizes the upper threaded bosses on the inner support plate, and runs up and bolts to the upper windshield insert for the inner fairing to add some much needed braced support. I may make a video on this, using my broken fairing and the upper insert for prototyping purposes. No added visible bolts for the fairing would be ideal, but I'm not exactly sure its possible. We'll see.

[@IronBornRider]

Thanks for the tips and sorry that happened to you. I’ll keep an eye out on my fairing

[@silkycherry]

Nice. I will hopefully get mine soon to replace the memphis shades fairing on my Street Bob. 👍

[@IronBornRider]

You’re gonna love it

[@77714anthony]

Sweet bike! What’s the link for that support bracket?

[@IronBornRider]

⁠thanks! here’s the link: www.ebay.com/itm/204744292977?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sltsjwmvtye&sssrc=4429486&ssuid=I1sK7QjZSC-&var=&widget_ver=artemis&media=COPY

[@zerok687]

dude i was searching for this . your video came just in time :D . thx from germany

[@IronBornRider]

Awesome! Glad it was helpful!

[@njfxbb9748]

Congrats bro..looks great!! 😎

[@IronBornRider]

Thanks brother!

[@KennyQuestShow]

Congrats on the new fairing!

[@IronBornRider]

Thanks Kenny!

[@403punk3]

Sick bro thank you

[@IronBornRider]

You got it

[@TheMotoJawn]

I like it. Do i start considering ST bob?

[@IronBornRider]

The answer is yes

[@crooksmoto]

We did a vid on installing a ST Fairing on our StreetBob and we've officially named the bike "BobST".

[@nelson080888]

Nice review. Love the gloves, do you mind sharing which website you purchased from?

[@IronBornRider]

Thanks! They’re from thrashin supply!

[@Doobie603]

I am sure you, as someone who has to find cool places to film his bike can appreciate the profile pic I took this weekend. Bunch of red, white and blue crushed cars laid out like an American flag! Happy 4th everybody! That fairing is amazing too! You just cost me 1300 bucks!😂

[@IronBornRider]

That photo is awesome lol. Keep on riding!

[@crooksmoto]

Looking for the link to that support bracket!? Very curious if that will help out our Advanblack ST fairing.

[@IronBornRider]

@@crooksmoto My bad here’s the link: www.ebay.com/itm/204744292977?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sltsjwmvtye&sssrc=4429486&ssuid=I1sK7QjZSC-&var=&widget_ver=artemis&media=COPY

[@DarkHorse82]

Thanks for the review man. Finding that sleek hidden support bracket helps me out too. I have an UltraCool oil cooler mounted up on my left front frame tube that would be in the way of that long lower bracket. Plus I think you’re right about it looking better too.

[@IronBornRider]

Thanks for watching. Yeah the support bracket was a good find since I like my crash bar

[@zackadams419]

That fairing looks great! Didn’t know aftermarket options were available like this. Also. What was the name of those crash guards? I want to look those up myself.

[@IronBornRider]

Thanks man! Yeah they just came out with it last year. The crash guards are from bung king

[@Hendomonster]

Sweet review. Thanks for that.

[@IronBornRider]

Thanks for watching!

[@texasfedtexasbred1803]

Hey bro, sick bike! I got the ST fairing as well, question though.. I got forward controls, can’t tell if you do but how were you able to mount the crash bar? I’m having a hard time figuring it out since flat bars usually mount where the forward mount. Any response is appreciated

[@IronBornRider]

I have mid controls so I’m not 100% sure but I know they make some crash bars that are compatible with forwards. Bung king might make some

[@texasfedtexasbred1803]

@@IronBornRider appreciate you bro!

[@IronBornRider]

@@texasfedtexasbred1803 good luck brother

[@dancarroll4904]

Liked the vid for the +10hp thunderbolt

[@IronBornRider]

Thunderbolt for the win!

[@nicknnr6493]

love it very nice , not seeing the link for that bracket.

[@IronBornRider]

My bad here’s the link: www.ebay.com/itm/204744292977?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sltsjwmvtye&sssrc=4429486&ssuid=I1sK7QjZSC-&var=&widget_ver=artemis&media=COPY

[@walterwaldo5784]

Fairing looks amazing, but it shakes like crazy, hitting bumps etc... you notice that on yours?

[@IronBornRider]

Shakes a little but not enough to give me concerns. Although some have mentioned theirs vibrate a lot

[@walterwaldo5784]

@IronBornRider yeah, drives me crazy. I keep checking the bolts, everything nice and tight, so I guess just deal with it. Just feel for the 1600 dollars I paid should be fookin perfect. Great vid, beautiful bike. Cheers.

[@Wheelsovfire]

Love mine but I noticed some vibration noise in mine drives me crazy sometimes

[@RoadReality]

Looks good! :D

[@IronBornRider]

Better than a streetglide fairing 😂

[@RoadReality]

@@IronBornRider [RoadReality has unsubscribed from your channel]. #BaggerForLife #BaggerNation Seriously though, I don't think anything beats a bagger fairing, especially the almighty #Batwing :D

[@Soulriderpowder]

Do u miss a nice wind especially for summer time

[@IronBornRider]

I was concerned about that initially but I do get a nice breeze even with the fairing

[@Soulriderpowder]

@@IronBornRider u wouldn’t change back

[@IronBornRider]

@@Soulriderpowder no I wouldn’t. I’m really enjoying the fairing especially at high speeds

[@Sway1177]

Second person that said that about the rubber grommets. Hopefully their customer service gets the memo and takes care of their customers. Looks sick

[@IronBornRider]

Yeah hopefully they can get some quality grommets. Otherwise pretty good imo

[@aaron1015]

What size MSW did you have? I’ve had the 9 and 13 non vented. The buffeting was giving me major blurry vision. They advised me to but the 15 inch vented and now I can get up to 80. Anything after that and I get buffeting. I’m 6 feet tall.

[@IronBornRider]

I tried the 11 inch, 13, 15 non vented and a 13 vented. In the end I went with the 13 vented and I still had bit of buffeting at about 80+.

[@aaron1015]

@@IronBornRider You said it in the video, but is the St fairing better? I'm stuck between stage two or the new fairing.

[@IronBornRider]

@@aaron1015 in my opinion it is much better at wind deflection, and it’s made a big difference for me. It’s a tough choice and it depends on what you prefer more. I might go with the stage 2 if you’re fairly happy with the road warrior fairing

[@JohnDoe-mp1yn]

would this fit the ST speaker kit from harley?

[@IronBornRider]

They said that it’s compatible

[@MrToast504]

What is the faring made out of

[@IronBornRider]

I’m not 100% sure. Their website doesn’t say

[@ahrayah90]

The fairing makes the bike look shorter. What changed from 2020 to 2022+ to the low rider s? Why do the 2022 plus models look taller?

[@IronBornRider]

They come with a taller rear shock

[@ahrayah90]

@@IronBornRiderAh ok, thanks.

[@franklin1046]

What’s the name of support bracket? I’ve been searching for one!

[@IronBornRider]

Here’s a current link to one: www.ebay.com/itm/204744292977?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sltsjwmvtye&sssrc=4429486&ssuid=I1sK7QjZSC-&var=&widget_ver=artemis&media=COPY

[@franklin1046]

@@IronBornRider awesome! Thanks brotha

[@M8_Hennessy]

I’ve heard the fairing from advan black is wider than the oem ST fairing can anyone confirm??

[@Goose868]

What’s the link for the lower bracket?

[@IronBornRider]

@@Goose868 Here’s a current link to one: www.ebay.com/itm/204744292977?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sltsjwmvtye&sssrc=4429486&ssuid=I1sK7QjZSC-&var=&widget_ver=artemis&media=COPY

[@Goose868]

@@IronBornRiderdid you need a longer tank bolt between the support bracket and the main fairing bracket? I went the cheaper route with the tcmt fairing and am sourcing the rest of the parts separately so idk if advan black included a longer tank bolt

[@scottcrooker9137]

@@Goose868having same issue with tank bolt not being long enough

[@IronBornRider]

@@Goose868 I used the stock bolt. It barely fit

[@Soulriderpowder]

This ST fairing is different than actual lowrider, ST Fairing right

[@IronBornRider]

@@Soulriderpowder yes it’s from a 3rd part called Advanblack

[@Soulriderpowder]

@@IronBornRider it does look better than actual low rider st fairing huh? Do u agree?

[@IronBornRider]

@@Soulriderpowder to me it does.

[@Soulriderpowder]

@@IronBornRiderit does looks better from video

[@Soulriderpowder]

@@IronBornRider do u ever get tired of riding same bike for while? Do u wish u still had ur sportster

[@sanemonk1]

Does it work on softail standard 2021?

[@sheryo17]

order the streetbob one

[@sanemonk1]

Street Bob fits softtail standard? Are you sure?

[@sheryo17]

@@sanemonk1 same bike except few minor thing essentially paint job...ask advanblack im pretty sure i'm right

[@bobberguy1]

Good looking fairing. The U. S. dollar isn't what it used to be. I bought a '57 FL in 1977 for $1200. Still riding it today.

[@IronBornRider]

Thanks! Yeah I plan on holding onto my bikes for a long time as well

[@civic2323]

lol that’s what he said to you lol

[@IronBornRider]

Lol

[@leorobles9885]

Not to hate on you bro. Your videos are pretty informative. But as a fan of the low rider st. Don’t buy this. Waste of money. You want looks ? You will get it. But That’s all. They are super flimsy. Along with those touring saddlebags they offer. They do a heck of a job paint matching . I will give them that. But not worth it. Like you said ,it feels “cheap “. Get the real thing. You could purchase every piece to build it, except for the fairing stay bracket. They are vin restricted . But if you’re cool with your parts guy at your local dealer, there is a way. Trust me. …Hope you enjoy your set up. Ride safe.

[@IronBornRider]

All good, appreciate the advice. It’s too late for me I already bought the fairing lol but the reason I went with advanblack is because they made it easy. I have a 2020 and would’ve had the drill a hole through the neck to retro fit the oem, didn’t want to go that far. Although the fairing feels a bit cheap overall I’m still happy with it. It gives me the functionality I need and has the looks at a much lower price point.

[@johnlittle6711]

Advanblack fairing looks better than Harley. Better lines. Just as strong!

[@jdmsurfer]

It's junk, Harleys fits better. Crapvan black is just that