I must say this is the best you tube video on juki. Keep it up. Greetings from Nairobi Kenya😊😊😊😊😊🥰🥰🥰🥰👋👋👋👋👍👍👍👍
@WhatMakeArt2 жыл бұрын
Greetings, happy sewing 🧵🪡
@carmelhorvath8055 Жыл бұрын
I just bought my new Juki and this is by far the best video I have come across for a newbee. Thank you 😊
@WhatMakeArt Жыл бұрын
Glad it helped, happy sewing 🧵🪡
@joryAlamry-ln2zy8 ай бұрын
Can you tell me where to buy please? I am in America Mishkan
@mikaelaclark34423 ай бұрын
Same!
@motozulli2 жыл бұрын
This is excellent. I teach sewing machine operation, and plan to use this as a backup reference for the students. It hit nearly everything I would say, and has very little I would consider unnecessary. Also the picture quality is great, and the voice is clear and easy to understand.
@WhatMakeArt2 жыл бұрын
So glad it is helpful, I teach sewing and use this for my students as well or when someone new wants to use the machines quickly 👍🪡🧵
@Vstrum3 жыл бұрын
Thank you, my newly purchased 8700 came with a really loose case but now the tension issue has been resolved
@WhatMakeArt3 жыл бұрын
Happy New Year and happy sewing
@thelasthomelyhouse2 жыл бұрын
Saved my sanity today - many thanks - Kate xx
@WhatMakeArt2 жыл бұрын
Glad to hear, happy sewing 🪡🧵👍
@Finaltouchstyling2 жыл бұрын
I'm so grateful for your help. Simple, quick and efficient. Congratulations on your teaching skills, best video out there and quickest also :)
@WhatMakeArt2 жыл бұрын
Glad it helped, happy sewing
@sewwithife73632 жыл бұрын
This literally just saved me ...thank you
@WhatMakeArt2 жыл бұрын
Glad it helped 👍
@mikulumalakumarierosette835 Жыл бұрын
Best video on the topic. Thank you
@WhatMakeArt Жыл бұрын
Happy sewing 🧵🪡
@mikaelaclark34423 ай бұрын
This was so helpful, thank you!
@WhatMakeArt3 ай бұрын
Glad it helped 👍
@lindaliang38258 ай бұрын
On a home sewing machine, when the thread and bobbin are properly inserted into the machine, together they form the letter "P" like princess. On the industrial machine when the threaded bobbin and case are inserted properly, together they form the letter "Q" like queen. So, I suppose I am ready to sew like a queen on an industrial machine!
@WhatMakeArt8 ай бұрын
Go go sewing 👸
@lindaliang38258 ай бұрын
I used home sewing machines and had bad results, such as uneven stitches, crooked seams because the feed dogs shift, etc. I am ready to buy an industrial machine. I didn't even know that threading the bobbin was different from a home sewing machine. Thanks for the video!
@lewy76012 жыл бұрын
My aunty said if you know how to drive a manual car, you will soon know how to master this sewing machine. 🤣🤣🤣
@WhatMakeArt2 жыл бұрын
🚗🪡👍
@AdityaSharma-dk1wp3 жыл бұрын
Very Well Explained, Thankyou so much Brother!! :-)
@WhatMakeArt2 жыл бұрын
👍
@christophermiles91353 жыл бұрын
It helped me a lot , thanks !!!!!
@WhatMakeArt2 жыл бұрын
👍
@whocared..11283 жыл бұрын
Great job it does helping a lot ..
@WhatMakeArt3 жыл бұрын
👍
@luizaionita6751Ай бұрын
How he choose white color tread in white mashing u barely can distinguish the tread
@WhatMakeArtАй бұрын
Thanks for the feedback about thread color, I agree and have been using high contrast thread in newer sewing tutorial videos
@nakshipolly56662 жыл бұрын
This machine can be operated by applying quilting pressure foot
@WhatMakeArt2 жыл бұрын
Yes, I believe you can use a quilting presser foot
@tamdong8213 Жыл бұрын
Hi I would like to correct this my Juki does not have a disk like your 8700 ; but 2 hole , the thread should go from back to front for first hole and the second hole should be from front to back
@WhatMakeArt Жыл бұрын
Yes, that is correct for the top threading,you really don't need the top disc
@estheradelaja9545 Жыл бұрын
This is great thank you.
@WhatMakeArt Жыл бұрын
Welcome 👍
@lizakauchha67312 ай бұрын
Can we use overlock or piko foot on this machine?
@WhatMakeArt2 ай бұрын
I would check with the manufacturer website
@tamaracaputo7105 Жыл бұрын
The best video tutorial!!
@WhatMakeArt Жыл бұрын
👍🪡🧵
@joryAlamry-ln2zy8 ай бұрын
Is it possible, please, to purchase this type of sewing machine from a store in America?
@WhatMakeArt8 ай бұрын
Yes, many stores in America sell industrial sewing machines, Globe Sewing in Cleveland, Ohio is a great place to buy one 🧵🪡
@maeroseleen5004 Жыл бұрын
Thank you very much❤
@WhatMakeArt Жыл бұрын
Welcome🧵🧷🪡
@IEXECUTIVE2 жыл бұрын
When sewing Jeans with Denim (medium to heavyweight) on an industrial, Should the bobbin tension be loose or tight? What should the thread tension be, loose or tight?
@WhatMakeArt2 жыл бұрын
Could be different for different thicknesses and number of layers of fabric. Generally, once you set the bobbin tension on the bottom it should be fine Do a test sew with different numbers of layers of materials and then ensure that you have taught stitching on the top and bottom and that the loop or "lock" is in between the fabric Then you should be good to go As a point of reference when I sew with Tex 70 thread I have slightly tighter upper tension and a bit looser Bob and tension than I would if I was sewing a shirt with thinner thread
@IEXECUTIVE2 жыл бұрын
@@WhatMakeArt Ok.
@laurenaguayo3 ай бұрын
How do i remove the bottom bobbin from hook?
@WhatMakeArt3 ай бұрын
Pull on the horizontal lever on the bobbin case
@pakistanpskistan4171 Жыл бұрын
Excellent 👍
@WhatMakeArt Жыл бұрын
👍
@shenazuppal51453 жыл бұрын
I bought a brand new machine 7 months ago.. not once did it wind without giving me a hard time. I did open the passage any yet the same issue.. now I have inserted tooth pick to hold the Bobbi .. but the winding is not perfect and causes stitch issue..
@WhatMakeArt3 жыл бұрын
If it was new 7 months ago I recommend taking it back to the place of purchase. There should not be a need for a toothpick to hold the bobbin in.
@WhatMakeArt3 жыл бұрын
You can spread the spindle the bobbin is on open with a screwdriver to make it fit tighter. You can also adjust the placement of the bobbin winder left and right by loosening the screw on the table and adjusting where it is compared to the tension disc on the bobbin winder. Continue to adjust these until it winds evenly.
@shenazuppal51453 жыл бұрын
@@WhatMakeArt thanks for the respond.. I will try to adjust and report back..
@rutheglu68562 жыл бұрын
Please I need help on how to fix the feeder dog holder
@WhatMakeArt2 жыл бұрын
Probably best to contact the place of purchase so they can take a look at the feed dogs Make sure everything is flush and screwed down
@asantestella36543 жыл бұрын
I have a problem with my Vesta industrial digital machine stiches
@WhatMakeArt3 жыл бұрын
I'm not familiar with that product but recommend reaching out to the place of purchase or manufacturer website
@mitzi11a3 жыл бұрын
I’m having trouble getting the bobbin thread to catch. What could that be?
@WhatMakeArt3 жыл бұрын
Make sure the scarf of the needle is pointed the correct direction. (Sometimes you need to rotate it slightly to get it to catch but it should be pointed towards the bobbin) Make sure that the needle is fully seated in the up position. Make sure the winding of the bobbin thread is the correct direction like a toilet paper roll. Make sure the bobbin thread goes through the proper grooves in the bobbin case. With a bobbin case out and the needle in, slowly rotate the wheel towards you and see if the rotary hook comes up right as the needle is down. The rotary hook should pass straight through the middle of the scarf. If the rotary hook does not go straight through the middle of the scarf then it is a timing problem.
@BBet3012 жыл бұрын
Hi, what size thread and needle was used in this video please?
@WhatMakeArt2 жыл бұрын
Tex 69/70 thread, a bonded polyester thread Needle was 110/16
@BBet3012 жыл бұрын
@@WhatMakeArt would 110/18 be ok to use with tex 69/70?
@BBet3012 жыл бұрын
Would 110/18 even fit on this machine
@WhatMakeArt2 жыл бұрын
Yes it fits
@WhatMakeArt2 жыл бұрын
Here's a good guide on thread and needle sizes www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=needle-size-chart
@kalsoomgn22 жыл бұрын
Is good
@WhatMakeArt2 жыл бұрын
👍
@edwardross97933 жыл бұрын
How can I shorten the Stitch on that machine
@WhatMakeArt3 жыл бұрын
It's the knob on the right hand side right above the reverse lever. Turn it clockwise or counterclockwise to adjust the stitch length It goes from 1 mm to 5 mm.
@edwardross97933 жыл бұрын
@@WhatMakeArt but we have done that and it's still not working
@WhatMakeArt3 жыл бұрын
Make sure that you have enough tension on the presser foot and you have the feed dogs raised enough otherwise the fabric won't be pulled through at the correct speed
@renatuswilliam1556 Жыл бұрын
Hi
@WhatMakeArt Жыл бұрын
🧵🧷🪡
@lindavaldivia28892 жыл бұрын
Como le puedo regular la puntada
@WhatMakeArt2 жыл бұрын
The circle knob on the right adjusts the stitch length from 0 to 5 mm
@rehanayaan47742 жыл бұрын
Hyderabad main branch kahan per hai ya machine ka
@WhatMakeArt2 жыл бұрын
👍
@monicamcknight37313 жыл бұрын
Hopefully ihere from you
@WhatMakeArt3 жыл бұрын
See reply to your other comment
@learntodriveall38482 жыл бұрын
👌👌
@WhatMakeArt2 жыл бұрын
🧵🪡🧷
@kalsoomgn22 жыл бұрын
Kaash ya la pati
@WhatMakeArt2 жыл бұрын
agala jeevan
@sunandamj6872 жыл бұрын
How to order
@WhatMakeArt2 жыл бұрын
Contact a local sewing machine supplier where you live and they should have this model or one similar
@marlouacain8844 Жыл бұрын
👍💓💓
@WhatMakeArt Жыл бұрын
🧵🪡
@rehanayaan47742 жыл бұрын
Order karna hai
@WhatMakeArt2 жыл бұрын
Nothing to order, just a video
@rehanayaan47742 жыл бұрын
Price katna hai
@WhatMakeArt2 жыл бұрын
Just a tutorial video not for sale
@jamalm2873 жыл бұрын
How much sir
@WhatMakeArt3 жыл бұрын
Just threading instructions, not selling
@RanjitKumar-cc6ht3 жыл бұрын
Kya hai mujhe likhkar bhej dijiye to jo ki machine ka