Wheel Balancer CB-3550,10-28" | Computerized | Manual Data Entry | 8 Balancing Mode

wheel balancer CB-3550 is our entry level wheel balancer. User must manually input ruler distance to wheel rim, wheel rim width and diameter using the keypad and measurement tools provided. It features dynamic/static balancing modes as well as 3 standard aluminum modes and aluminum S mode for quick accurate balancing of wheel assemblies using stick on weights without chasing. (machine constantly keeps asking for more weight with each spin). Balance up to 28” rim diameters as well as most light truck including dual rear wheel assemblies with included light truck main shaft flange expansion ring and light truck cones included. Main shaft wheel weight capacity is 145 pounds. The wheel balancer CB-3550 also shows the static imbalance value in dynamic mode to aid the user in eliminating any vibration from the wheel assembly. If a high static imbalance is found after balancing the wheel in dynamic mode the user can at the press of a button switch to static mode and eliminate the static imbalance which avoids comebacks. Wheel assemblies can be mounted either cone inside with included spring and plastic bowl or cone from outside wheel rim.
wheel balancer CB-3550 Includes accessories: wheel weight pliers, a 4-cone car/light truck set including light truck flange adapter, rim caliper measurement tool, quick nut for quick easy installation/removal of the wheel assembly and self calibration weight.
The largest cone is 7 inch so the central hole of the rim must be 7 inch or less and combined weight no more then 145 lbs.
Highlights
Rim Diameter 10"-28"
Rim Width 1.5"-20"
Maximum wheel weight 145 lbs.
Static/Dynamic/ALU1-4/ALUS/Motorcycle modes
Power supply 110v/1ph
+ or - 1 gram of accuracy
Oz/Gram switch
includes free truck cone adapter set
includes plastic hood and quick release nut
Durable 40 mm Shaft
Accessories:
4-piece cone set standard
Speed nut standard
Light truck flange standard
Reverse Bowl standard
Weight pliers standard
Protective hood standard
Tower spring
Calibration weight
Specifications
Power supply/ Motor power
110V 250W
Max. Wheel weight
155 lbs
Rim diameter
10"-28"
Imbalance Resolution
±1g
Cycle time
6-9s
Working ambient
5°C-40°C
Noise
70db Max
Shipping weight
287 lbs.
Shipping dimensions
38”×30”×37”