Wheel Off Detail Step by Step on the Focus RS

[@markcase913]

I’d still recommend two buckets. The first one just needs to be hot water anyways! Always good to have the water one to rinse and keep the soap one clean

[@MacchiMulatto]

This is the way.

[@gartsmall]

The quality of Cameron’s content is just insane. I really really strive to be able to do cool things w cars in the future and get my content up to par with things like this🙏

[@raybeats9141]

1:00 damn that’s why I love your videos man those type of motivations is what some people need to move in everyday.

[@greecoboost]

21:06 Pro-tip: to get your glass extra-smooth and clean, use glass cleaner as lube and run a clay bar/towel/mitt over the glass. It removes all the tiny embedded grit and makes it super smooth. This makes your wipers last longer, too, because they're just gliding across the surface without as much resistance. Then you can apply something on top of it like Rain-X ceramic spray, which is is great for keeping glass clean and coating it with a layer of hydrophobic stuff. Water beads-up and rolls right off.

[@EricTsu]

Love the attention to detail on the wash. Ive seen other youtubers and detailers alike brush all the dirty soap from the bottom to top and it hurts me every time I watch it. Kudos!

[@CameronAlford]

Its all in the details right! Appreciate you Eric

[@officialmew1127]

I had a Focus ST for a year before I bought my EVO. You want to invest in the Ford Performance short shifter (if still available) and the shifter bushings as well. It made the shifting feel a whole lot better.

[@greecoboost]

Unfortunately, the Ford Performance short shifter was discontinued, so a similar mod would be for ST owners to swap their shifter out with a factory RS shifter. It's about an 18% throw reduction, I think. And yeah, I've done the shifter base bushings mod and rowing through the gears is so much more satisfying after doing that. It's a must-have.

[@officialmew1127]

@@greecoboost I wasn't sure if it was still available or not. I got rid of my Focus and bought me an EVO X.

[@stevenharris4866]

highly recommend doing the wheel wells and brake calipers first before the hand wash, mainly because you’ll get over spray from the iron remover and degreaser onto the paint which will take any wax or sealants off that area and you don’t want it to sit on the paint. also dirty water from the pressure washer as well! but hey i love it the passion shoes in the small details !

[@greecoboost]

Sound advice!

[@parkerrobinson9731]

as someone who pays the same amount of attention to detailing my own car 🚗 appreciate the attention to detail in this video!

[@Austin-rs1bb]

Battery or gas leaf blower for drying works good too especially in intricate pieces, then come back with some detail spray and microfiber to finish 👍

[@joshwittenburg4225]

Had no idea you did SI’s labels! Im looking at picking up some of their products for my detailing season.

[@elbertmejia4232]

I got a red 2018 rs. I’d recommend 2 bucket method, should also ceramic coat it

[@RodalAuto]

Happy 300k, I’ve been watching since the ST. Love to see you grow

[@CameronAlford]

Want an ST or RS shirt like I have on? I made it for you! They’re for sale now on carmaspeed.com

[@fastsvo]

Would love to see how you got the car on all four jackstands

[@charliewilliams1474]

If ypu have the ability to pull that off in Yuma that would be so F-ING Sick. Sending out the vibes so you get all the positive energy.

[@CameronAlford]

Yes i need em!!

[@electricdoor]

Did my first detail on my new '18 NB RS last week! Good looking out on those fender wells and calipers, though. Gonna flush the brakes this weekend and follow suit with some Meg's HCW and CarPro Perl. You reminded me I also need to hit all the plastics with Perl too, oops! Can't wait to do a one step polish and CQuartz on this thing. (Previous owner didn't love it like I do.) Might be a good idea for a video!

[@treeeyn5721]

Love the attention to detail Cam keep it up brotha

[@jamesreilly8328]

Looks fab, great job.

[@idkdev2437]

Quality video cam.i love these detail videos personally and hoping you get the opportunity to shred Yuma! Make a detail video on the sti?! Maybe a bring back to life detail?

[@Mk4joe]

Love CS wish I could meet you and do a video when I get my st

[@monraypretorius3585]

100% get rid of the IC blank, just heat it up to get most of the residue off. Also get rid of that videos focus badge on the trunk lid lol. Pro tip, get the wheels powder coated as they tend to flake because crap paint job by Ford, otherwise if you're planning a different wheel setup then don't worry about it.

[@truthform]

Damn would have wanted an under car angle at the jacking point, I'm completely new to this but am ready to get under mine myself.

[@scruffyLG]

Definitely picking up that shirt

[@mattsee45]

Congrats on 300k bro! Love your vids and keep up the good work! I'd love to see another GC8 update though, I miss that car hehehe

[@hum___h]

This is like me watching myself when I first picked up my NB RS last year. It took me like 5 hrs to clean EVERYTHING inside and out. After I have clean the rims multiple times, and the pads are just generating WAY too much dust even after switching to the Yellow pads. I GIVE UP. ( and I’m sorry for neglecting you) 😂

[@madmyro]

My driveway elevation is toooo crazy to do the wheel off approach. Any suggestions on doing this? I’m a ST owner and would love to give my ST3 some extra love.

[@ladiezman239]

Can seem to find where to purchase that foam cannon sir...

[@charlesbish1]

What happened to Impreza coupe build?

[@derpasaurusrex8335]

Is that Yuma? Noice you are an hour away from me. Focus fam for life. 🤙

[@veigarbobao6121]

your video is very nice, I'm a fan of your work

[@CameronAlford]

Thank you so much 😀

[@AlavonMajor]

Can you do a video on how to permanently get rid of that annoying ass windshield haze/film that forms inside the car? Major pain to deal with on my s550 Mustang when detailing.

[@CameronAlford]

Hmmmm... i will look into it and ask detailer friends. My friends who vape get it fogged up way quicker way worse lmao

[@greecoboost]

@Someone. This is excellent advice. I'd also like to add that Stoner makes a tool that allows easy access to clean the inside of windshields. It makes the job really quick.

[@snakelda]

Yo! I'm from Yuma too! Moved to Phoenix in 2018 and been here since, couldn't believe you said you were going to your hometown, Yuma lol!

[@snakelda]

I visited Yuma last month and the Mr g's looked so different, Yuma is on the comeup

[@CameronAlford]

Heck yeah, yuma gang haha

[@eduardopantoja5997]

Keep up the awesome content Cam!

[@CameronAlford]

Thanks! Appreciate you!

[@Nathan-rj1wh]

This was such an amazing video 🤩

[@CameronAlford]

Thanks Nathan!

[@legitlanius5564]

please do a genesis coupe next

[@cfrostmedia]

Love your videos man keep up the good work cant wait too see what you do too the rs!

[@CameronAlford]

Thanks homie! Appreciate you!

[@jessebudelman]

What year is it? I know the 18’s were limited editions with black roof and LSD standard.

[@mlwrance]

Definitely need to get the Gorilla Lug Nuts for either the old or new wheels. Those OEM lug nuts are trash

[@Kiwiiyt]

you should get a dry blower, especially for your wheels, much faster!

[@poker_18rs92]

I have a red RS. There are times where I wish I had a white RS. Trying to maintain red is difficult.

[@brandolifts7928]

make an overland RS

[@milopiva1139]

you should be able to take the intercooler cover off no prolem

[@robbheinz6633]

where is the rally armor?

[@garrettnichols831]

To sell the st and buy an rs 😅 going to marketplace right after I like this video

[@GodLikeMikeLive]

Eventually, you should do a Coyote swap with a 10r80 to keep the AWD. That would be so nasty!

[@robertbogus1306]

so hype broooo

[@scryndz6556]

Give it to me

[@ak2112]

You need a wheeled detailing seat. Watching you crouching is making my back hurt!

[@Mbleezy0]

Bring back 350z

[@austinwolfe2373]

Hopefully you weren’t there on the $300 lift ticket days💀

[@CameronAlford]

$70 on a Wednesday 😎

[@anonamos6086]

The OEM wheels are such a pain in the ass to clean. Terrible design.