Wheelcair attached to my electric scooter

Kugoo S1 attached to my manual wheelchair. Cheaper solution than so called the usual attachable electric scooters

[@DIYAllManphKDWzpeedengineering]

Thumbs up, very nice idea...and will help other PWD's to have an electric wheel chair

[@linus031961]

This is a really great idea. I will try to make the same for my wheelchair. Thanks a lot and a big hug.

[@ImreTiitsu]

I would suggest that you lower the handle bar. My hands are getting tired after longer ride. But, maybe it's just my personal problem.

[@linus031961]

@@ImreTiitsu You're right, and also try to bend it a little toward the seat. Thanks for the suggestion.

[@robertcuthill8484]

Great idea so I went out and bought a scooter to do the same thing. But I can't figure out why the footrest on my Quickie GT doesn't sit flat on the deck of the scooter like yours does. I have the rear axle adjusted as low as it goes raising the frame/seat height at the rear. And also raised the foot rest up as high as it goes to compensate for the incline of it resting on the scooter deck. I can see the top frame on your WC is on an angle like mine is but yet your foot rest sits level as the scooter deck. What am I missing here??

[@denseljosephs9500]

Thanks for the upload I'm in the process of building mine using a rear drive scooter.

[@kluskaemilie1036]

Génial!!! J'aimerai réaliser le même dispositif pour mon fils. Bravo 🤗🤗🤗

[@jimbobby1162]

That’s pretty cool!!

[@andysteen7376]

Ive added a scooter to my wc too. I did notice you didnt extend the wheelbase to get more weight over the footplate. Dont you get lot of wheel spin on hills?

[@ImreTiitsu]

Here where I live, there are not many hills, but the battery pack could be mounted on a vertical pipe, then it would have a better grip.

[@Theobr011]

Very cool! Your escooter is not kick to start? Or did you modified something?

[@ImreTiitsu]

No, it's not kick start e-scooter.

[@richardhart3682]

I presume if it was kick start beginning to wheel would make it work.

[@marioesposito1211]

dove si aquista questa modifica e quanto costa?

[@SimbaSteel]

Simply Amazing

[@marrotjeanjacques]

Bravo pour votre idée Il y a une idée similaire kzbin.info/www/bejne/Y36Qiot6h9OUlas

[@dhgzebraa261]

Where do I find the thing that makes it so I can securely put my wheelchair on the scooter?

[@ImreTiitsu]

You mean that plastic plate what is screwd to scooter? This can be anything basically. Even wood. I chose plastic because it lasts longer and rain is not damading it. Wood is also quite soft.

[@manp1039]

where did you get the plate and how did you attach it to the scooter?

[@ImreTiitsu]

Just a 2cm thick of plastic bolted to the scooter. This can be anythink. Even wood.

[@edvelz8073]

Check this one kzbin.info/www/bejne/raGUhp5mo9edns0

[@david.5273]

Looks great but putting plate on and screws everytime pain in the ass.

[@dennishein2812]

Nice

[@robertcuthill8484]

Anybody thinking about doing this, Think Again! Yesterday I did the same modification and on the first test I took the spill of my life! Totally unstable and top heavy. Man did I hit the pavement!

[@andysteen7376]

Came a cropper top. I've now widened & lowered my wheelbase by adding a second axle bar. Bar 1 general use Bar 2 Scooter/hand cycle.

[@giosueconte743]

Dove si potrebbe comportare o avere notizie l magari un numero di telefono grazie

[@ryandesmonddennis]

What size scooter did you use

[@ImreTiitsu]

www.geekbuying.com/item/KUGOO-S1-Folding-Electric-Scooter-350W-Motor-8-0-Inch-Tire-Black-411071.html?pmrm=ems-item-similar-emspd

[@aysmch622]

Good i can make it double multi function

[@agmedali6486]

K’