Unboxing the LUFI XF! | Full Installation & Detailed Explanation (Features/Review)

[@SunflowerTwix]

Hey mate. Was skeptical buying one of these. Just ordered it before watching your video. After seeing this I feel a lot more confident in my purchase. Thanks heaps mate! Appreciate it. Update/EDIT: 31/05/21 It arrived today. I put it in and I'm happy with the result. This video is a godsend for information about setting up the config how you like it. It's fast and responsive. While it does feel a little cheap with the smaller 'racing' styled display making it hard to read from a distance, it's still a nice product and I'm (so far) satisfied with it. I'm not a huge fan of the 'gear' information box. As it only shows a 'gear' based from a pre-set speed section you enter. It doesn't show you the gear you're in from the OBD2. Just the "you're doing xxx speed that means you're in x gear" readout. I do recommend this product though. Ezpz. Thanks again @When Hann Meets Cars for the awesomely informative video!

[@WhenHannMeetsCars]

Thanks man, really appreciate those kind words! Glad that this video managed to clear your doubts! Thanks for watching 🙏🏻

[@SunflowerTwix]

@@WhenHannMeetsCars Please read my edited comment. :)

[@WhenHannMeetsCars]

@@SunflowerTwix Thanks for the honest opinion! Actually I totally agree with what you said about the gear information as well. Glad you’ve gotten your Lufi, enjoy and have fun with it! Anyways, thanks again for taking the time to comment here. Hugely appreciated!

[@rodbenitzki14]

you can put the nut the other way (hexagon hole) so you do not have to hold it when tightening the bolt. :) great video!

[@WhenHannMeetsCars]

Hi! Hahaha I only noticed it after watching the video, thanks for the advice though! Appreciate it 🙏🏻

[@eddyann2]

Did you tried using without the IGN cable connected to the fuse? Mine, the lufi xf turn off the display when ever I shut down the engine. Does this means that IGN not required?

[@TMCHL]

This is the Best budget hud display wish it was a lil bit cheaper :) Great video thanks

[@WhenHannMeetsCars]

Yup! It definitely cost higher than other similar products in the market but it’s worth it! Thanks for watching 🙏🏻

[@mohdmirza1228]

Awesome review! Can’t wait for mine to arrive! Thanks

[@WhenHannMeetsCars]

Glad it was helpful! Thanks for watching 🙏🏻 hope you’ll enjoy yours when it arrives!

[@nabengpeace9962]

Sir for the third wire using if obd socket doesn’t function ya after we switch on the key?

[@lawrencekanhai4497]

I bought one but it doesn't work on my nissan.sylphy kg11 .Can someone explain???

[@liowjinyong3250]

If the metre turn on and off itself. Does it mean I don't need to connect the acc cable to the fuse box?

[@rahulkr522]

Hi There, Mine stopped working as it is showing as TF card error, I lost all the files in the TF card, can you please help me with the files in your TF card please?

[@WhenHannMeetsCars]

I’m not too sure how to get that fixed but you may ask your dealer/seller you bought from for advice!

[@m3lowiesvlog715]

It’s going to display 8000RPM right if it’s a high rev car or only showing 6000-7000? Thanks.

[@WhenHannMeetsCars]

Yup! It’ll show 8000rpm if your car is able to reach that value, as it’s based on your car’s factory settings on the ECU 👍🏻

[@m3lowiesvlog715]

@@WhenHannMeetsCars cool!!! Thank you man!

[@user-hh2qc6to1u]

Sir,gd pm.can i have one lufi xf for my suzuki spresso gl mt 2023 model? In the philippines how much

[@lawrencekanhai4497]

Why doesn't it work in a Nissan Sylphy 2010???

[@avafly.fishing]

Hello,, you now if will work on mitsubishi!!

[@dericklabuschagne5879]

hi there i bought one and i drive a 2010 e90 320d lci ,the lufi does not give me the oil temp or pressure ,will the be a bmw development on the lufi.

[@GehLong_Musk]

Bro...actually this lufi XF can use on suzuki swift sport zc32s 6mt or not? When i plug in my car the device just show seaching protocol...plz advise

[@Acespaceraceterrace]

Mine came with Chinese language how to change it to English??

[@WhenHannMeetsCars]

Sadly you can’t, maybe you could ask the dealer where you bought it from and see if it’s possible to exchange for an English version one 😬

[@meteorpolice1152]

Does the odometer mileage reset every time you use it? Or does it keep track of the mileage between sessions? Also, can you manually set the mileage to match the car's odometer?

[@jkpisces]

so means if it works without connecting the acc cable , then just leave the acc cable alone ? wouldnt that drain current out ?

[@WhenHannMeetsCars]

Yup that’s right you can just leave it, no it wouldn’t drain the current out 👍🏻

[@jkpisces]

@@WhenHannMeetsCars thanks a lot , will try it out tomorrow morning . appreciate the thorough video . please make more hahaha

[@MKT20]

Hey bro! When you turn off the car. The obd2 port can still supply power to the guages and it will drain the battery or not?

[@WhenHannMeetsCars]

Yo! Nope the obd2 port only supplies power when the engine starts, and it won’t drain the battery at all when the car is off 👍🏻

[@nigelcarter41]

Hi mark, I recently bought the older Lufi x1, it has a feature for auto off /on or you can set it to turn on and off at a certain voltage. Mine comes on at 13v and turns off at 12v

[@Deedeeyaw]

Hey Cool Video. I notice that some of my friend's Vios NCP93 has the door open feature, Im using the NCP150 however it does not have this feature. When I plud my Lufi to their car, it appears. Does that mean that my car does not support the function? And also I find that the Mileage is not the same as the one on the speedo when it is reset, can this be sync-ed?

[@WhenHannMeetsCars]

Thanks man! Yup sadly that’s because the NCP150 does not have that feature. Yup yup you can set the odometer of your Lufi in display setup menu, all the way to the bottom 👍🏻

[@shanisrimalee4755]

Can use Mazda familia 1983

[@stevechu4761]

Hi and very very nice detail video. I just got my new car 2021 Perodua Ativa. By any chance will it be compatiable? Thank you so much and looking forward for your replay. 👍👍😁

[@WhenHannMeetsCars]

Thanks Steve! Congratulations on your newest acquisition, it shouldn’t be a problem to have this device on your car as almost all cars now come with OBD2 port and with that you can just plug it in 👍🏻

[@WhenHannMeetsCars]

www.onzperformance.com/ you can purchase it from here if you wish to! Cause if it doesn’t work they would fully refund back to you 👍🏻

[@lawrencekanhai4497]

@stevechu4761....I paid almost 2 times the amount to have it in Trinidad. It doesn't work??? Why?

[@craftwanderer8802]

bro why does my rpm not work? latest version but rpm doesn't display... bmw 118i 2012

[@alexanderreid3337]

Great, very thorough!

[@WhenHannMeetsCars]

Thanks Alex, appreciate it! 🙏🏻

[@MyspanaMJ]

Memory card slot? Mine didn’t have

[@icetray_3503]

Can this switch between kilometers per hour and miles per hour ?

[@WhenHannMeetsCars]

Yup!

[@abdulhafiz14]

Can we change the xf logo thingy in the middle to display the speed instead?

[@jounilaukkanen27]

Where does The Black wire IS to Be connected, ?

[@MiguelAlcaraz]

Hi there, does it work with a Toyota Yaris 2004? Thanks

[@michaelwong4839]

Hi. Quick question. Is this compatible with hilux vigo 2014?

[@johnnyperez8833]

Does anyone know if the mph can be tracked by gps ? For example if installing into a manual car

[@rahulkr522]

Hi Bro, What is the price of this and may I know the quality of this product? I'm planning to add this in my Suzuki Ritz (Slash), May I know your opinion?

[@WhenHannMeetsCars]

Hi Rahul, the price it cost here in my country (Malaysia) would be MYR400, maybe you can do a conversion and see how much it cost for your side 👍🏻 the quality of this project is quite good, responsive and clear display data.

[@WhenHannMeetsCars]

It depends whether you want to have more of your car’s info being displayed so that you can monitor, especially for older cars. For your case it should be worth it 😌

[@rahulkr522]

@@WhenHannMeetsCars Thanks for the Info😊

[@rc-power1511]

Hello, What turbo pressure measurements can be chosen? kPa, PSI, does it measure in BAR?

[@WhenHannMeetsCars]

Hi, great question! For this particular device, it only measures in kPa 👍🏻

[@itsthefridge]

@@WhenHannMeetsCars I originally had this and sent it back. They just reached out to me saying that the newest 1.28F firmware allows for changing of values to PSI on the radial gauges.

[@WhenHannMeetsCars]

@@itsthefridge Ahhh I didn’t know that, thanks for letting me know! Great to hear that they’re doing that 🙌🏻

[@abrmjw.m8688]

Hey there, Does it work on Toyota Revo 2017 model?

[@WhenHannMeetsCars]

Hi! It should work, but its better to ask your dealer or seller just to be sure!

[@spartacus457]

THIS CAN USE FOR MITSUBISHI MONTERO 2015 MODEL?

[@R35pect00]

This lufi xf you bought is original from seller or like copy ori but not original?

[@WhenHannMeetsCars]

Hi Aaron, this lufi xf device is original 👍🏻

[@R35pect00]

@@WhenHannMeetsCars thanks bro

[@guyelsenburg9196]

Dose this have boost psi?

[@nenobujas6567]

Hello, did you noticed that Oil temp is higher than Water (coolant) temperature (in my Smart 453, that is impossible)?

[@Pavel_Engines]

All depends on the car. The oil in the car is the main source of cooling and the oil typically run hotter than coolant even during for normal highway driving. For race track driving, the coolant temperature will stay stable around 200F(90-95C) while the oil temp can easily reach 250-260F(120-130C)

[@Dmnlndr]

will this work on my 2005 highlander

[@nela5596]

Can it input a 0-5v external sensor?

[@boscokhoo2463]

hi, how do i set warning sound to alert my rpm has gone beyond a set value?

[@WhenHannMeetsCars]

You have to go to setup menu, warning setup, and from there you can set the threshold for your rpm 👍🏻 at 10:03

[@DT-xr3eo]

do the fuel level shows nothing?

[@issacyew1719]

Hi bro,, model myvi lagi best can install.? Tq

[@WhenHannMeetsCars]

Hi Issac, I’ve just asked, apparently Myvi lagi best can’t install this device, only the latest one (MG3) can :(

[@issacyew1719]

@@WhenHannMeetsCars tqtq for ur info.. Tqtq

emm how to change into English language?

[@WhenHannMeetsCars]

Hi Shah, sadly you can’t change the language. Maybe you could ask the dealer where you it from and see if it’s possible to exchange for an English version one 😬

[@SinclearGriffithDJSINRG]

I have a 2017 Toyota hiace I am having trouble setting up can you help

[@WhenHannMeetsCars]

Hi! Yeah sure is there anything I can help? 🙋🏻‍♂️

[@SinclearGriffithDJSINRG]

@@WhenHannMeetsCars I am only getting voltage reading no rpm nor boost pressure or even fuel reading

[@SinclearGriffithDJSINRG]

What would you need from me to help with the setup

[@WhenHannMeetsCars]

@@SinclearGriffithDJSINRG Have you tried going into the display setup and configure the data you want to display? Like the rpm or boost? Because by default it won’t be there unless you set it by yourself

[@SinclearGriffithDJSINRG]

@@WhenHannMeetsCars that’s the problem I am having, understanding now I loaded the Toyota up that is in the system and now everything work perfectly. 🙏🏾🙏🏾🙏🏾👍🏾✊🏾

[@mnlord11]

Mine cant display oil temperature and oil pressure which is the most important part in exora turbo 2020.. Not sure if anyone can do manual PIDs to sort this problem

[@WhenHannMeetsCars]

Hi! Sorry to hear that but yeah some cars just don’t have it by default from factory. Yup one way is could try to install third-party sensors but not sure if it’ll display on the device itself 🤭

[@mnlord11]

@@WhenHannMeetsCars its kind of disheartening to know that i will require 2 more gauges just to monitor the oil pressure and oil temperature.. Thanks to the lausy och by proton, more then 10ys already they cant find solutions for it

[@Vinoisthename]

Does this drain the battery of the car?

[@WhenHannMeetsCars]

Hi there! Nope it doesn’t 🙏🏻

[@Vinoisthename]

@@WhenHannMeetsCars thank you!

[@ZamDGarage]

Lufi x1 have this feature to customise the main interface?

[@WhenHannMeetsCars]

Hi, Lufi X1 won’t have the flexibility to customise the main interface. It can only change the data which you want to display 👍🏻

[@spartacus457]

WHY NEED TO CONNECT TO THE FUSE?

[@WhenHannMeetsCars]

@@spartacus457 Hi! You only need to connect to the fuse if connecting the OBD2 port doesn’t work, which is a rare occurrence.

[@spartacus457]

@@WhenHannMeetsCars THNKS.. my car is mitsubshi montero 2015 ... called it pajero from other country. with diesel engine.. is it compatible to use for this LUXI XF?

[@WhenHannMeetsCars]

@@spartacus457 Yes it’s compatible because I’ve seen people installing it on their Pajeros, if you’re planning to buy its better if you ask the seller itself first to be sure!

[@issacyew1719]

Yr 2015

[@acc1tester398]

which is newer? xf or x1?

[@WhenHannMeetsCars]

XF is newer 👍🏻

[@roastedtechmodules5858]

How to buy

[@WhenHannMeetsCars]

You can purchase from its official store, link in my description!

[@mritunjaymishra5568]

nice

[@WhenHannMeetsCars]

Thanks man! 🙏🏻

[@official_rog_gaming2860]

Hi is good for upgrade in camry 09?

[@WhenHannMeetsCars]

Hi! Yes it’s definitely a good upgrade for older cars as it doesn’t display much data or information about the car but this product does!

[@yathish-]

Can this display in mph ?

[@WhenHannMeetsCars]

Hi Yathish, yup it can be displayed in mph as well which can be done in the settings! 👍🏻

[@yathish-]

@@WhenHannMeetsCars thanks mate

[@paktamchannel3579]

Viva and saga BLM sapot?

[@musicalmotovlog7983]

What's the price

[@WhenHannMeetsCars]

Hi! The price in my country would be about MYR 400, so you’ll have to convert it depending on where you’re from (excluding shipping fees) 👍🏻

[@notalkracing]

how to change language bro

[@WhenHannMeetsCars]

Sadly you can’t, by default it’s in English

[@notalkracing]

@@WhenHannMeetsCars but mine is in Chinese bro , and i want to change to English

[@WhenHannMeetsCars]

@@notalkracing I guess you have to swap your device with an English version one, that’s what I’ve been told before

[@davidmm3422]

How do I change water temperature to Fahrenheit?

[@WhenHannMeetsCars]

You can change it in the system settings, under “unit”, you have to scroll it a few times to change Celcius to Fahrenheit 👍🏻

[@davidmm3422]

@@WhenHannMeetsCars I appreciate your reply. Thank you. One more thing. How can I increase the rpm gauge? Mine is caped to 6000. My car can hamdle up to 8000 rpm. How can I add the extra two rpm?

[@WhenHannMeetsCars]

@@davidmm3422 I think that’s got to do with your car’s default rpm limiter, my car’s tachometer shows up to 8000 rpm as well but it has rev cut at 6000 rpm. If you really wish to hit that 8000 rpm mark, then you’ll have to remove your rpm limiter on the ECU 👍🏻

[@afiqhaironi3225]

Hi bro, is that acc cable compulsory to connect or its depend on the car type model?

[@WhenHannMeetsCars]

Hi Afiq! Good question, no it’s not compulsory to connect it, in fact you don’t have to. It’s just there just in case the OBD2 port doesn’t work which is rarely the case, people would just hide the cable 👍🏻

[@afiqhaironi3225]

@@WhenHannMeetsCars oic, thanks for the advice. 😅👌🏼

[@figuremaker4690]

bro,,, what function volt adjust?