Which Circular Saw - Left or Right Side Blade?

A lot of people don't realise that you can get cordless saws with the blade either on the left or the right side. Both have advantages and disadvantages and in this video I explain what they are.
Proper DIY Patreon Page: / properdiy
🧰 The tools and equipment I use: www.amazon.co.uk/shop/properdiy
Rag 'n' Bone Brown Channel: / @ragnbonebrown
Amazon links to the tools and materials used in this video...
► Dewalt Cordless Saw DCS391N - amzn.to/48ZxSng
The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases.

[@michaelcorcoran82]

I think the facts you point out are linked to whether you are left or right handed

[@jmwadding]

Agree. I'm left-handed and when I'm trimming of an inch of a board with a left-blade saw I support the board with my weak hand and guide the saw with my strong hand. The wide baseplate on the right suits me. But I've got a right-blad saw too. 🙃

[@c.a.g.1977]

Never even realised this, owning both the plunge saw and cordless saw, both makitas... I guess that, when I felt the base was unstable, I just came at it from the opposite side of the board? The moment I saw the Milwaukee one I thought: that must be Keith's saw 😄

[@NSResponder]

My woodshop teacher back in middle school told us to always have the motor over the workpiece, not the offcut, and to switch sides as needed. Always seemed obvious to me.

[@jcsamitchell]

Another informative video on something that I should have knew, but had never paid that much attention to. My tip to save fingers on a leftt hand saw and help in other obvious ways, cut all wood / sheets on a insulation sheet. Fully supports work work, no balancing Nothing drops on floor. No damage to end of wood as weight snaps last 10mm or so off. or having to use other hand to try and catch. Impossible to touch blade with fingers.

[@tonyguest581]

I got my Skillsaw in 1981 as a 16 year old apprentice. I can still smell it now out of the box, the black and gold colour looked too good to use on a building site. I'm 60 now and still a carpenter and it's always intrigued me why the blade was never on the left and now I know. I would have taken my fingers off on the first go as that "know it all" apprentice. Great video, always appreciate when you post.

[@disqusrubbish5467]

The worm drive Skilsaw every framer used in the 80s had the blade on the left. And weighed 18 pounds.

[@scottvessey915]

As a left hander who is about to buy a circular saw, this video was perfect timing - cordless it is, thanks!

[@Bear502]

As long as you realise it doesn’t apply as is but needs to be reversed.

[@djstuc]

As a left hander myself, you’re better off getting a standard saw and learning to use it right handed. MFT’s and tracks are all designed to be operated like that.

[@fredholmes6284]

Am a cuddy-hander & av got the right-sided circ-saw

[@michaelblair2447]

I am in the exact same boat! I was aware of the left-right question but baffled. This video helps a lot, thank you.

[@pete_lind]

They had available corded left hand blade saws , Bosch CSW41 and CS5 , DeWalt DW5535 and SKIL had several model , all gone or hard to find . Think only one left is Big Foot with 10" blade , for US market .

[@whiteboar3232]

So many things I've never thought before! Thank you for bringing DIY up to another level.

[@truth3358]

Rule one don’t touch or adjust the blade while the battery is fitted

[@johnnyshinnichi1785]

Just what I was thinking. If you're going to do videos to help people, please follow safe practices.

[@MrJozza65]

I've wondered about this for years, and this answered a lot of questions for me. Thanks!

[@richjones5432]

This is something I had never considered. My first circular saw was a B&D drill attachment. I was just 14 but always into woodwork. I had never until tonight thought about saws being handed. Food for thought & nice work.

[@rpredl]

I have an old Skill worm drive with the blade on the left. A beast of a saw.

[@glennirwin4710]

Your right, I never thought about this issue. Nice video.

[@fredjcarss7788]

Very informative and much food for thought. Thank you for this.

[@IgnatiusZaaijman]

Great video Stuart! I'm in the market for a circular saw, and now I know what to look for. Thanks!

[@BrodaPaul]

Didnt realise this issue until i saw this video! Good one stu.

[@mauricioferrari7181]

Great video. I've exchanged my Ryobi cordless left hand side using the warranty because of issues on cutting with a corded Makita that is right hand sided, I still have to try it as I've done it a few days ago.

[@mattjones708]

As always...perfect explanation Stuart 👍 Thankyou !

[@andyc972]

Thanks Stuart, I'd never really thought about this before as I haven't seriously looked at buying a new circular saw for a number of years apart from a Tracksaw and as you said they're all RH, however thinking about it, being left handed the LH would feel more natural to me ! Your safety point is an important consideration, I don't use my circular saws that regularly, but when I do I try to focus on the safety first when deciding how to make the cut - again it's not natural to me as I use a handsaw with my Left hand and so clamp the piece with my Right.

[@oldjake4233]

I don't do as much DIY as I use to, but circular saws are always a priority for me.

[@harddriven1344]

Same with me grandad.

[@raydriver7300]

Good morning, it’s nice to meet a fellow Brit. Such an interesting video; I have the same DeWalt saw, and a track saw for exactly the same reasons. Thank you for inviting me round 🌞

[@DIYLONDON]

As usual Stuart, informative & well presented. Top man !

[@clutteredchicagogarage2720]

I have both blade right and left saws. I agree that when you are cutting off the end of a table or saw horses and your offcut is unsupported then blade right is more stable. For blade left, if you are right handed, you want to support your offcut. You can cut on a bench and place scrap wood blocks underneath your workpiece to support both the work side and the waste side. You could also put some kind of foam board underneath your entire workpiece. One issue with my blade right saw is that the motor protrudes on the left. So when i use a speed square as a guide and cut full depth, the speed square edge can interfere with the motor, which is frustrating. Either right or left work for me as long as i set up my cut appropriately. I just have to set up my cut differently depending on whether i am cutting with blade right or left if i want a fully supported cut and if i want to use a guide.

[@mr.e8432]

Back in the day porter cable made a left handed circular saw, which I bought as a righty. One of my favorite tools of all time. It’s got to be 30 years old and I still use it on a regular basis. I went to buy my brother, a circular saw for Christmas a few years ago and could not find a lefty model anywhere. It’s nice to see that they make some lefties now, even if they are battery powered.

[@halpadgett3166]

Yep, got one of those PC Mag saws. I’m a righty with a left hand saw.

[@edwardvandeketterij3786]

Im about to buy a skil left blade battery powered, i m in the skill 20 v system. Already have a corded skil rightblade for years. The video really helped!

[@shaun30-3-mg9zs]

Hi Stuart, great review on left/right side circular saws, I have 3 all mains powered a cheap and cheerful Parkside I have had for 5 years still going well and 2 Black and Deckers one of them was made in the 1960's it has a 2000 watt motor and still fitted with a black MK 15 amp plug which I use a 15 amp to 13 amp extension lead it was my Taids ( Welsh for Grandad ) and I didn't want to take the plug off. the other one is about 3 year old and all three are right handed blades, as always a great video

[@simonmiddleton4977]

Had never thought about it but makes sense, great video as always thanks 👍😃

[@davidhumphrey70]

Thank you for yet another informative video Stuart. Your videos are always great. My wife also enjoys a little boogie to your intro theme every week when I watch your videos 😊 It is all kinds of backwards for us lefties with the blade on the "wrong" side for us. Having a quick Google there are a few left hand side bladed corded circular saws but they're either not as widely available or very expensive.

[@awantamta]

Something I never thought about, so thanks for that

[@williamemerson1799]

I bought a PC corded left hand saw around 15 years ago after wrist surgery. Pretty slick. 👍🍻

[@graemeadamson7272]

Cheers fella for another great vid . Have owned 2 circ. saws for about 5 yrs. now, and it never even occured to me , just got used to using them and thought that was just how it is ...... luckily they are both right-handers ! ( the second one soon replaced a cheaper one ) Most used power tool in my garage bar none , would recommend buying one to anybody , but don't buy cheap , Makita , De Walt, Bosch kind of price range is best . Thank you 👊

[@tonysutton6559]

Now that I've actually thought about it, I've realised that I just switch hands and/or cut from the oppsite direction but I suppose that I'm lucky because I can use either hand. I agree with the track saw comment about getting neater and more accurate cuts. It's the one thing that I've bought in the last few years that has really lifted the standard of my projects.

[@colecciongranados]

Really interesting!!! So useful!!! Thank you!!

[@LindsayAllen-gg9lb]

I started with the same Skill saw, then got the same cordless and 2 months back got the dewalt 54v plunge saw. Totally agree with all your points. One thing you missed out … if your cutting and using max saw support to a line sometimes the waste is below the saw and your cutting into the workpiece. So workpiece is smaller due to blade thickness. More of a point to remember

[@dadsonion5292]

As a beginner and not knowing saws came in both types, I got a right blade corded saw. But then as a left hander and for all the reasons you mention, notably the safety issues, it didn’t take me long until I bought a left bladed Ryobi cordless saw. My hand holding the work piece was no longer close to the blade, and I no longer got covered in sawdust.

[@smoggydrones5664]

When I saw the red tool I knew were you got that from lol. I’m left handed so I do find certain tools harder to use than others. I’m a big fan of the yellow stuff. Main stream tools are very much like cars these days not really a bad one. The basic choice really is what colour you like. Good video but perhaps overthinking things a little

[@300Exige]

Blade on the right for me every time 👍🏻. Nice vid as always Stuart 🎉🎉

[@SiAnon]

All mine are on the right too. Never understood the left sided ones unless you are left handed.

[@carbb5760]

Ya blade right for sure also never understood why it’s a debate

[@RiBenjafield]

Really interesting and useful video Stuart, thanks. I bought a second hand plunge saw for sawing in my half a garage workshop (to reduce the dust) and use my corded Dewalt (blade on the right) for outside. They both work great but I spend a lot of time on the Screwfix website looking at cordless saws - not least because the panel saw at B&Q is very often out of action and you can save a packet by buying a full sheet. Now I have some idea of the pros and cons of left or right configuration so thank you. I wondered if that was Keith's saw... 🙂

[@DesandSam]

I've been puzzling over the pros and cons of right and left sided saws. I had the same discussions with tradesmen working in my house recently. They had the same dewalt cordless saw. They were so used to it that they didn't realise it was opposite to the norm. I had to show them my ancient corded Bosche saw to convince them. I also have the same cheap track saw you have. However, I might yet buy a left sided cordless for the reasons you mentioned.

[@mleys3248]

I was intreaged. And now I am informed. Thank you

[@targetspecies]

I have one of each…problem solved. Use them both regularly! So helpful.

[@rrddaatube]

I've always wondered and now I know. Thanks! My next door neighbour cut through two fingers while trimming the bottom of a door, he was holding the off cut. Luckily he had the depth on the saw set well or he would have coped them off.

[@An.Individual]

Interesting video. I have always thought the blade should be on the left (for right handed people) but after watching the video, I realise it's best to have the blade on the right.

[@kroozer5215]

Just bought a Milwaukee rear handle left blade cordless circular saw, best saw i have ever used, only regret is i should have got one years ago, never really liked using circular saws, not very confident with them to be honest , until i got this lefty blade.

[@djediguy2156]

My makita 5801B that my granny bought me leaving school 35-36 years ago is a beast & going as good as day 1 ( corded tho ) I went with the dewalt dcs579T2 & dws5022 (1.5m) & dws5023 (2.6m) guide rails & extra flexvolt battery Expensive tho but might suit some of your subscribers Kudos for going right to left & I enjoyed the video

[@ianmurray3820]

I’m looking for a cordless saw for convenience but From a safety point of view - being familiar with power tools and how they react allows you to develop muscle memory over time - where as swapping and changing on a regular basis something as basic as which side the blade is on might introduce another element of risk.!? Especially with a circular saw.! Also even with eye protection wood chips and loose bits of carbide are a definite hazard when you’re peering directly at a cut line…. Great video and very informative. But I think I ‘ll go for a R/H blade just to keep things simple..👍

[@ianmcbain898]

Good video Stuart. Another compromise instead of 2 saws you can get just a circular saw with a track compatible base or a saw with a guide rail adaptor. Both Makita and Dewalt make track compatible bases but only Makita make the adaptors for both corded and cordless saws.

[@davej7458]

My original saw that I used for many years was a circular skill style saw with the blade on the right. When I became a carpenter apprentice, I began to use a heavy duty worm drive. A saw that seems strange because it's blade is on the left. Something that was actually very useful for production cutting and framing of buildings. When the circular skill saw type saw came out with a left hand blade I immediately got one. It's very handy and light weight when you have to make a precarious cut on the left hand side of a deck deck or something like that.

[@chris_hertford]

As a right hander I prefer left side blade so you can see the cut! Very glad Bosch new GKS70 saws come in both side options!

[@dskirkpa55]

Again thanks for the info.

[@alanstalker5499]

Excellent safety points here. And, a rational justification for my 🟩 track saw!

[@davidpatterson1574]

Very informative video

[@daichimax]

Great Advises! 👍👍👍👍👍 & Subscribed.

[@danielmackey6594]

I have a dewalt with the blade on the right, and it's quite usable right handed (it is designed to be used in the right hand orientation). It actually has a rather large viewing "window" that you can easily see the blade while cutting. The Milwaukee my co-worker has, has a much smaller window, and it's quite hard to use right handed.

[@ramblingprose6603]

Yes I’ve used a left sided corded saw in Oz about 25yrs ago. Haven’t looked for one recently

[@FredWilbury]

Thanks for this I’ve a corded right hand so decision made I’ll get myself a left cordless for my shed / model Railway room 👌😎☕️

[@harpo187bling]

Good advice

[@jupiter4836]

Great video!

[@oldowl4290]

Take note that all Worm Drive saws have the blade set on the left. I've used one exclusively for everything for two decades until recently having bought a smaller cordless 7.25" and most recently a corded 7.25". My rule of thumb is always set the piece or section you are keeping (whenever possible) under the motor and widest section of the base plate. Whenever you do the opposite, motor on the scrap / falling side, is when you get the most inaccurate cuts because your scrap is falling out from under the wide base. Its overly difficult (as illustrated in the track saw in this video) to try and keep a square edge with just the thin part of the base near the blade. So again, set scrap on blade side and set the saved piece under the motor. The last thing to do is adjust / set the blade to either side of the line as needed. I keep a note pad of all "fence to line" distances for this adjustment when using a clamped fence based on blade thickness.

[@mariafhp]

Thank you , that’s helped me ❤

[@Vanjonsorz]

I just walk around the workpiece so im always supporting the saw on the bulk of the stock🤷‍♂

[@michaelplays2449]

Great video !!!!!

[@Kevin-the-Just]

Thanks for this. I've been considering a cordless circular, but hadn't even realised the blade position was a choice. As a complete numpty when it comes to DIY, having the blade on the 'other side' will probably save my fingers.

[@disqusrubbish5467]

The most dangerous position is behind the saw. If it binds in the wood, it'll kick back. You never want fingers behind a circular saw - nor do you want your thigh behind the saw. (Nor obviously do you want your fingers near the blade in the first place.)

[@lazyhobo2454]

I think I have the same skill saw my father gave me, it’s probably 30 years old too, still works just as good as it used to. Bet the newer ones won’t last as long!

[@lyndonwhitson2269]

As a left handed person in a right hand world and retired carpenter I have used right handed saws and power tools either handed. I do have one left hand skill saw and it was for cutting stair stringers where I needed a 45* cut for the riser. It is a 6 1/2 skill brand cord saw. Didn’t know they quit making them left handed.

[@ogatkinson6274]

I happen to own a porter cable corded circular saw with blade on left side and still use it. Dont know why they stopped making it, also at the time I bought it 30 years ago it was the lightest corded saw at 10 lbs. Great saw.

[@andrewmills4672]

I'm left handed so the DeWalt is perfect 😂

[@ClifftopTragedy]

Same here. I never even noticed that my corded and cordless were opposite🤡. Now I know why I keep putting the blade on upside down🤣

[@cobberpete1]

As per some comments below Stu. I a Lefty. I'm happy with the right had blade.

[@randywl8925]

I'm 66 and this is the first time I've seen this discussed. 👍

[@pault8734]

Another gem Stuart. I am about to purchase one of these so well timed! At 3:11 into the video you discussed the lack of support on the waste end. Could the saw not be used in left hand format which addresses the issue. This has of course revers implications for those who are naturally left handed too of course. Best regards

[@SprocketN]

I’m primarily left handed, but years of having to use ‘the wrong hand’ with lots of tools I’m now able to swap hands with no problem. Except for writing, when I write with my right hand no one, not even me, can read it!

[@dougdavidson175]

Thanks Stu. Having watched a "few" Tube vids I was starting to think it was a requirement to use the thin side of the shoe... I shudder every time. Take care & stay safe M8.

[@chriscolameco6850]

Skil makes a 15a corded lefty saw. I use blade left for crosscuts and blade right for long rips

[@worstuserever]

I think people often begin from the position of wanting to see the blade and the cut, but where accuracy matters, most cuts are made against a straight guide so that's what you need to monitor. Also, as you say, the notch indicates the leading edge if you're eyeballing it. I chose a right-hand side blade because I would often be cutting close to an edge, trimming doors for example, and as a righty myself this keeps more of the foot supported. On many occasions I've found it convenient to operate a saw or other power tool left handed though and it's really no problem; what matters most is thinking the action through and arranging as much as possible for stability.

[@michealayoung1785]

I had similar thoughts about my lathe! The power button is on the left. I’m right handed and would prefer quick access to control the power

[@johndaley4743]

My Makita Hypoid electric drill has the blade on the left. I bought it 30 years ago. Cuts like a cadillac!Cadillac!. Very smooth.

[@FreshtexBlackman]

You have a left handed drill with a blade? Interesting 🤔

[@davetaylor4741]

Several manufacturers do left hand blade electric circular saws. In the cordless I have both. But after so many years with the right hand, as a professional carpenter. I prefer right. And certain things I can only do with a right blade. So if I had to choose, it is right for me. But if you were left handed.

[@WombleUK]

The left sided saws are predominantly the US versions of the saw that manufacturers just started shipping to the UK also. It always used to be argued that the right sided blade was safer because if the saw kicked back (which isn't really so much of a thing these days) the blade was away from your leg. All worm-drive saws (much more common in the US) always used to be right sided blades & direct drive motor saws that were standard in Europe/UK/Japan always right sided. Also yes you can get corded left blade corded saws, do a search for rear handled circular saws which is basically the style of worm drive saws. I own half a dozen circular saws Carpenter & Joiner for 37yrs & got left & right Milwaukee M18 saws which depending on what I'm doing one is better than the other. But that's my two pence worth anyways 😊

[@clemmcguinness1087]

And vice versa. Good video

[@woodrowsmith3400]

I own a Porter Cable model 843 with the blade on the left. Bought it some thirty years ago. Still use it today. Likely unavailable anymore as Porter Cable seems to have quit building quality tools. I agree with you on all the failings of left hand saws...but...I only buy and use left hand saws. Just me, I guess, but I feel uncomfortable using right side saws.

[@madnadn]

Great, I have never thought of the danger for my fingers when using the same dewalt cordless saw.

[@PhG1961]

Wonderfull Sunday morning entertainment. Btw, maybe do some explanation on the type of saw blades, number of teeth etc... and the according materials to cut (wood, hard wood, mdf, aluminium, polycarbonate etc...). I would appreciate it!

[@gregmanning9870]

I'm an old tradesman we had the left hand worm drive and when cutting plan our off cut should be on the left so you can hold it to stop tear out

[@lesthiele4921]

Hi Stuart, that was a great video, it has now made me think what my two skill saws are, left or right? The firdt skill saw I ever used, was a adapter that B&D had thst you attachdd to the drill, I only usec it twice and tossed the adapter out, I have both a cordec and battery skill saws, bedt regards from a Kiwi living in Australia

[@petejones1957]

Nice video, thank you. Just bought an Aldi 40V brushless motor saw, which to my dismay turned out to be a "leftie" there's a switch for the laser under the handle, which you have to press every time you use the saw, actually when it's running, totally stupid design, and unless you're holding the saw with your left hand, there's no way that you can get at the switch. Ideal for a "south paw" but if like most folks you're right handed, a bit awkward , bujt for £40 a very good saw!

[@ra4yu]

having your blade and handing on the same side is basically always safer and more accurate. It is slightly slower to line up cuts but that is pretty marginal. The big discrepancy is free handing rips, having opposite handing lets you see the blade and cut sheets quickly and accurately with a bit of practice. Compared to setting up a fence its a big time saver, its really aimed at contractors. From a DIY point of view they seem easier but will probably give you worse results

[@Viken43]

I use a hand saw in my left hand, find plunge saw feels wrong when I use it. Tracks are for right handed people 😅

[@andyedwards6124]

As a left handed person with this same dewalt circular. I have no idea what you're complaining about 🤷🏼

[@kvernesdotten]

My first one was a corded one like yours, right hand side. Then I got a cordless one, like you, with a left hand side blade. Having both is really nice but for how expensive cordless ones can be I wouldnt be able to justify having one of each type if the corded one wasnt already fairly old and much cheaper. I have to admit I generally like the left hand one more though

[@LiqdPT]

For my quick stuff, I've got a 3" (I think) Dewalt cordless saw. Easier to handle than even the one you have there.

[@Robr1701]

For the thin cuts with the left-hand blade, set up and cut from the other side of your bench.

[@daveturnbull7221]

I'm a left hander and until recently only had a corded circular saw which was used mainly for breaking down sheet goods (with the same diy track system as you made). I recently bought a cordless one that has the blade on the right but I still use both hands on the saw - it just doesn't feel natural not to.

[@jcoul1sc]

I think tooth count and application makes a difference too. I have a fine tooth blade, slow cutting with fine finish and you are more likely to touch near the blade. If rough cut cls with case blade I just horse it through

[@ernieforrest7218]

As a left hander, ive always preferred a circular saw with the blade on the right side. However, circular saws arent intended to replace table saws. And the straight edge devices are intended for that type of use. Ok for job site use, but shops should be using either a table saw or a good quality rack saw.

[@monteglover4133]

Worm drive generally have the blade on the left side (in the US) and are preferred by many carpenters. I use a left side blade often for precision cutting breaking down veneer plywood. These are corded tools For most home owners I’d recommend a corded saw.

[@Mc674bo]

Hi Stuart. Having just replaced my aged corded circular saw for a new corded Bosch saw , I’m beginning to realise I still need a track saw . I was hoping the new saw would be more accurate , but it’s proving not to be the case . So at some point I’ll be looking at the track saw solution. I notice the one you are using is a reasonable priced , I’ll be interested to know if it suits your needs . Kind regards as always 👍

[@o.g.bwoodwork]

Great video mate. I feel a bit naive not knowing you can buy saws with blades on different sides. I’ve wanted a track/plunge saw for ages now and I was going to build a DIY track like you have, but it seems I might be better investing in one instead.

[@berempamuk123]

im so glad that i can actually use both my left and right hand when using tools

[@lawrencegreen489]

you can compensate the tipping by compensating with a piece of material the thickness of what your cutting attached with double sided tape.

[@gnic76]

Good info, I always wondered about that👍 Bosch corded CS5 is left hand and Bosch corded CS10 is a right hand, North America anyway, don't know if any in UK.

[@waynesmith9997]

You should look at the skillsaw mag 77 its blade left worm drive gearbox, it's a beast of a saw

[@antking8847]

welcome to the world of us Left handers!!