Which CO2 Laser Engraver is Best - Aeon vs Thunder vs Epilog vs Trotec

Epilog Laser vs Thunder vs Aeon vs Trotec: Which CO2 Laser Engraver is Best? We have two diode lasers but we’re ready to expand our craft business to cut clear acrylic and thicker wood. We’re not sure which machine is best for us. We got 4 major laser engraver machine manufacturers in one space. We spoke with ‪@ThunderLaserUSA‬, ‪@AeonLaserUSA‬, ‪@epiloglaser‬, and ‪@TrotecLaserEngraving‬ and asked them a series of questions. Here's what we learned about CO2 laser engraver machines.
#co2laser #co2lasercuttingmachine #AeonRedline
Chapters:
00:00 Introduction
00:38 Thunder
10:07 Aeon
20:30 TroTec
28:22 Epilog
36:38 Recap
All content on this channel is for informational/entertainment purposes only. The owner of this channel makes no representations as to the accuracy or completeness of any information in these videos, descriptions, or from any external links, and will not be liable for any errors or omissions in this information, nor for any losses, injuries, or damages from the display or use of this information.

[@lock.robster]

This is an excellent video filled with relevant laser information. Been looking for something like this but this is the only laser engraving manufacturer comparison I’ve found. Great work!

[@FamilyUnit]

Thanks so much! We try.

[@GeorgeKennerLaser]

I bet you end up with an AEON… you could also consider the AEON that has both a RF and Glass tube, in the same machine, giving you the best of cutting and engraving. The Pre Redline name was a Super Nova. Lightburn supports doing a job with the ability to run both (either tube) on the same project. Great Video your work helps people in ways you may not even know. Cheers!

[@FamilyUnit]

Thanks so much George! LOVE the option Aeon offers for BOTH RF and glass. Definitely an important consideration for us. We can only hope to someday achieve your level of artisanship! Looking into David Hawkins 😎

[@skallinator]

Yea I was considering Aeon but the leadtimes are prohibitive for a fast moving business.

[@FamilyUnit]

@@skallinator Aeon lead times can be a little disconcerting.

[@UnknownDeInflaCollector]

What an well explained video

[@FamilyUnit]

Thanks much. We’re trying to ask all the right questions. Let us know if we missed anything!

[@TrotecLaserUK]

Thank you for your visit, it was great meeting you!

[@johnwalker5159]

Trotec is definitely worth a look. They develop all core components of their laser engravers, cutters and marking machines including drive systems, machine components, controls, electronics, electrics and software. The laser is produced by Trotec's sister company, Iradion Laser. Trotec's production sites and manufacturing lines in Austria, Germany, USA and China are organized based on the automotive industry manufacturing model for better efficiency and cost savings. Standard industrial components like motors, power supplies and touch displays are sources from Siemens, Beckhoff or TDK-Lambda for the highest quality standards. Their machines look impressive. Would love to see some cost estimates.

[@FamilyUnit]

And you as well! Thanks for taking the time to introduce us to Trotec.

[@admtim]

Have you spoken with Monport or OMTech yet? Definitely will be some language barriers. Curious to see what their story is.

[@FamilyUnit]

Monport is on our list. We have already reached out to their customer support line hoping to get a response soon.

[@realsnacky]

Xtool support is so hard to understand

[@FamilyUnit]

They are unapologetically Chinese. Not a bad thing unless you’re trying to communicate your problem.

[@1-Nice-Guy]

Xtool is the worse!

[@wendymasters367]

I see Fresh has his TV reporter thing going on again 😂

[@cheryltracy4433]

I remember him on the radio in Philly!!

[@FamilyUnit]

He’s trying to ask all the right questions. Let us know if there’s anything you want him to ask.

[@fitymi5292]

So hard to choose which did you pick

[@FamilyUnit]

Still deciding…. Do you have one?

[@AeonLaserUSA]

It was so great getting to chat with you, until next time!

[@FamilyUnit]

We enjoyed the show and getting to meet everytone at Aeon. We're very excited about the new Redline series.

[@grantburrage]

It was great meeting you guys!

[@FreshandFelicia]

DUDE! Excellent interview, thank you so much for taking the time to do that. Hope your voice recovers quickly.

[@damoney1]

I'm in decision mode as well. I currently have an XTOOL D1 20W. Seems you've made a decision already. You said to the AEON rep, "looking forward to working with you in the future". I like AEON and THUNDER myself. Leaning towards THUNDER.

[@FamilyUnit]

We actually said that to all the vendors. But Aeon is a serious contender!

[@FreshandFelicia]

Epilog seems like they've become too big for their britches. Maybe it's me, but it seems like they know they're on top and don't care anymore. That's a dangerous attitude with innovations, similar features, and better pricing coming from Aeon, Trotec, Thunder, and even xTool. Almost pulled the trigger on Epilog, but now I probably won't go that direction.

[@FamilyUnit]

Lots to consider before making a purchase.

[@mollygreathouse1191]

I got Epilog taste with an Omtech budget! What's the best compromise

[@FamilyUnit]

LMAO Aeon or Thunder are EXCELLENT alternatives at a much more affordable price.

[@cheryltracy4433]

Grant is adorable 😍

[@FamilyUnit]

Uh oh - Grant has a FAN CLUB!!!

[@rickhoguerealtor]

Nice video. I know you have the transcripts, but was wondering if you would share the list of questions you asked each company? Based on this video, Aeon and the new Redline Series were the winners with a very tight second going to Thunder Laser followed by Epilog and Trotek. All are excellent choices, and all have their own good points and imperfections. These are companies that are listening to their customers and making major changes to their infrastructure and product lines to more align with the needs of their customers. Thank you for sharing.

[@FamilyUnit]

Thanks. We learned a lot. Don’t have the list of questions but they are in the video and you can pull them from the transcript. We decided to go with Aeon Redline Mira 9. Can’t wait till get it. Lots of videos coming once it arrives.

[@stevesmith-sb2df]

Liked this video. I have a DIY C02 laser. The hardest part using it has been temperature (too hot in the garage) and fume extraction. I can exhaust the laser out the garage or window but then my neighbors will get it. I have been looking at filters to remove most of the odor. Hope you get your laser soom.

[@FamilyUnit]

We are getting closer to get a CO2 laser. We did convert part of our garage to a "laser room" with AC as we vent out the door. We've only done this with our diode lasers so far and no ones complained....that we know of.

[@johngibson540]

Which Diode are you upgrading from?

[@FamilyUnit]

WeCreat Vision and Xtool M1