Which Optic Riser is BEST for YoU?

[@InTheKno]

lol no mention of eye relief in this video is wild. Especially, when the homie at 3:21 is pretending to look through the magnifier.

[@jabbott376]

I thought it was just me that noticed that 😂.

[@Heywoodthepeckerwood]

Did they go over placement on the rail? RISING THE OPTIC DOESN’T CHANGE THE NEED TO PROPERLY SET THE OPTIC UP FOR EYE RELIFE. Should they spell it our in crayon for you? Oh, you must think you caught something because you are so effing smart.

[@InTheKno]

@@Heywoodthepeckerwood Cool story nerd. At no point did I mention rising the optic, and they didn't properly set up the optic for eye relief. Since you wanna be weird and go all caps I'll return the favor. IT IS PHYSICALLY IMPOSSIBLE TO SEE THROUGH THE MAGNIFIER AS SHOWN AT 3:21. Congrats on being poor and not being able to afford this setup.

[@Heywoodthepeckerwood]

@@InTheKno hey dummy, using the qualifier “especially” after asking a question means you think they should have to explain to people the need to correct for eye relief while then using the clip you stated as an example. I suppose, they could have put in a disclaimer for the slow people out there that they still need to follow proper mounting protocol pertaining to eye relief as these risers do not change the need to do so. By the way, I said what I said because the world is filled with too many people that like to seem smart by pointing out the obvious while shitting on peoples work. Eff you and people like you.

[@lindboknifeandtool]

You guys really kill it with the content. Companies never do it right. Bravo.

[@NeonVars]

A bit more niche, but an honorable mention goes to the Wilcox riser. Those things are slick with the integrated flip to side.

[@christopherk3436]

Love the Wilcox Riser

[@eotechinc]

Yes they are!

[@90civicsir]

I like the Unity mount because of the magnifier flip to center option.

[@eotechinc]

It really is a game changer.

[@Shogunslossy]

I use the unity and it’s amazing. Couldn’t suggest it more!

[@InvertedLonestar]

I feel like the eye box on the magnifiers used in this video were set up wrong. Every shooter is different, but for me when I run a magnifier I have to get in pretty close to gain a good sight picture.

[@AEGISDEFENSE]

Ill probably get a Unity riser. I hear lots of good with them.

[@RobotPanda15]

For those on the low end, Brownell's has a riser similar to Overbore's for 52.99 that provides .75" - combine it with an EXPS/558 and you get a 3.5" approx HOB, similar to what the more hyped risers provide.

[@kalanipitmon7817]

The chest weld with the hydra lol

[@carlosdaniels9515]

Leapers UTG Super Slim Picatinny Riser Mount. Saddle heights available .5" .75" .83" 1". Lengths available 1.57" with 3 picatinny slots and 5.5" with 13 slots. Locking torx screws with square shape integral recoil stops for a secure zero hold. I absolutely love my scalarworks 1.93 RMR mount. Got it from Midway USA for $149. It made me want to outfit 6 of my other AR platforms with risers also. Some are LPVO, Red Dot, & Red Dot & magnifier combo. 6 Leapers UTG mounts on sale at $19.99 cost me $120+ tax & shipping vz 6 scalarworks or unity mounts for $900+tax & shipping. They are rock solid, light weight and hold zero. For example, on my budget 7.62x39 AR build my Holosun HE510C-GR is 1.41" above rail. Mounted on the 1" 3 slot riser brings it to 2.41". And on the .5" riser its 1.91". That's comparable to my scalarworks 1.93 and unity's 2.6. Trust me, you can't tell the 0.2" difference.

[@CIA_Alien]

One of these days someone will build me a Bluetooth barrel mounted camera system that goes straight to my thermal / NVGs and no mounting systems will ever be needed again. Never have to put the barrel around the corner w/ my head, over and under cars again and do it like a supersocomelitegreenberetfrogmandeltaforcecagciaspaceforceguardianpararescusniperecon all in one. OMG so fuckn elite!

[@fredsalter1915]

super true, sir

[@dustinhopkins6470]

I have the overbore mount for my exps -3 and magnifier. No complaints

[@kalanipitmon7817]

Same on my 14.5, 10.3 has the unity fast tho Both r good

[@pmorin313]

Can't name them all, however LaRue makes a nice quick detach riser and BCM now offers risers as well as mounts. At a decent price point. 👌

[@BrandensOutdoorChannel]

I need to bring the magnifier way back, i need suggestions for better eye relief with a fully extended stock.

[@dannynguyen2423]

Can the G45’s mount be used as absolute co-witness or only in lower 1/3?

[@IrishLizard44]

Is Unity really the OG if Larue made theirs like 6-7 years prior? Why do so many “modern” companies overlook Larue tactical?

[@josh22920killer]

I wish this video was on your website... I just now realised i ordered the wrong unity riser mount for my eotech exps-3... (I ordered the absolute riser)

[@bruceharris4512]

do you have the 5-inch riser with the quick release leaver?

[@mantirig4139]

Would be good to have drop test or something on the toughness of the risers. Read that the ones that co-witness with iron sights can bend kinda easy

[@iornlint]

Sad to miss the wilcox risers here since there's little info out there and it's specific to eotech products

[@eotechinc]

With enough interest we’d love to do a breakdown of all these risers and more.

[@theGhost_141]

Great video but where are the OGLs? And why did the price go up by almost $1000?

[@dantheman4751]

Love the guy at 3:11 pretending he has a sight picture, lol.

[@theflyingfetus9405]

You're right his nose isn't touching the charging handle 😂

[@-joe-davidson]

To be fair, the magnifier was flipped out of the way.

[@dantheman4751]

@@-joe-davidson Just rewatched it. You are right.

[@eotechinc]

This is true, and he has a short neck ;)

[@fredsalter1915]

Great vid & great topic. "Perfect sight alignment" would be to place your eye along the bore of your rifle, which is obviously not realistically possible. Even iron sights are "above bore"..... So what is the optimum height of an optic system on a rifle? Can't be zero (physically not possible). 12 inches? Obviously too high. Hmmm...

[@darkfoxjj]

Possible with a drop stock.. look at paintball. But there is no recoil with those markers.

[@kylehill4437]

What a great company! Recommending 3rd party products.

[@willl4219]

That makes me respect them even more

[@jayonez137]

Well, they don’t make any higher mounts than 1/3 lower themselves, so they’re just trying to make suggestions because they know that their consumers want to bump up there optics to 1.93 and beyond.

[@SamSam-ih6nt]

​@@jayonez137exactly

[@CmndrXander]

How close was I on the last video guessing the build?? Also, I’m totally sold on risers now. Would love to see a raised Vudu 1-10 offset with an EFLX

[@chaselastname7918]

@unitytactical makes one. The FAST LPVO🤘

[@CmndrXander]

@@chaselastname7918 🤯🤯🤯🤯🤯🤯🤯

[@eotechinc]

Yes indeed!

[@MrKillswitch47]

Where can I find the zeroing chart for the different riser heights from the first video

[@eotechinc]

Just reach out to Unity Tactical and they will hook it up.

[@dt8694]

I use the Wilcox riser on my Sig MCX Virtus sbr tacops and a unity and gbrs on my kac Sbr and adm on my MCX spear

[@eotechinc]

All the best on the flex rifles. We dig it!

[@zexnynex777]

​@@eotechinc😂 That 1 rifle has 5 parts to its name.

[@memegineer1983]

Pretty sure you guys linked the wrong ADM mount. For example, you show the AD-1700-XLR mount in the video but link the AD-1700-R 10 Lug and the AD-1700-R Dual QD mount in the video description. This is my fault, but I didn't pay attention and bought the AD-1700-R Dual QD mount expected the XLR. Luckily, it still works for my needs. Please correct me if I am wrong.

[@kencollins2002]

Are there any considerations to take with a 512? Would it be a point of weakness for the battery compartment to extend past the front of the riser?

[@eotechinc]

No that would work great!

[@zexnynex777]

​@@eotechincIs it mainly because 512s are built to handle steep drops, bomb blasts, heavy machine gun recoil and other war zone related elements? 😀

[@FriZ..]

How much would risers help with cross eye dominant shooting with this hws? I’m left eye dominant and shoot right handed

[@liggerstuxin1]

I’m craaazy lucky that I’m right eye dominant. my eyes are now straight, but my left eye used to be lazy. So now it is not at all the dominant eye. I consider trying to train left-handed if it were the case.

[@janicejohnson1334]

I have a EO 512 on my 300blk . . I have to twist and kink my neck . . VERY uncomfrotable . . . What size riser will work for me ??? ...

[@keggerous]

These companies should be embarrassed by how much they're charging for these risers... It's actually disgusting.

[@HussEmUp]

Unity is pretty reasonable.. my go to on my rifles

[@keggerous]

@@HussEmUp The primary Unity riser people talk about is like 100$ on a good day. That's not all that crazy honestly. Still expensive, but not insane. A lot of them from other companies and even other models from Unity are like over 200$ though. For me, that's an insane asking price when you can get a YHM or a UTG riser for 20 bucks.

[@Mr_Zimm]

Start a company, buy the machines, pay the taxes and fees to your state, and design and manufacture us a cheaper riser.

[@keggerous]

@@Mr_Zimm I can just buy the YMH or UTG ones for 10-20 bucks... I don't need to go through all of that. LOL.

[@Furiouspenguin27]

@@Mr_ZimmYHM already does that bro

[@RiceCrisp320]

Is there any solution(other than a riser) for your magnifier quick release interfering with the charging handle...

[@drewmarr3315]

How many pic slots does an exps and magnifier combo require at a minimum?

[@SeanHavlik]

Check out the SC irregulars OMM

[@fredboudreaux9663]

Great info

[@rcrinsea]

What is so special about the 2.26" height? The point is to raise the optic for ergonomic purposes, but how did the industry settle upon 2.26" as the ideal? Or is that a Unity thing?

[@Heywoodthepeckerwood]

The average Americans total head to face ratio divided by the average flexibility times length of the neck is how they came up with the different hight risers. Fo to your local gun store and ask them to perform these measurements for you so you can pick the correct riser.

[@KalashKrusador]

Does ADM not make that small 6 lug riser any more?

[@KacyColledge]

Funny question, is there any issue with putting more than one riser stacked on each other? Like 2 Unity Tactical Fast ?

[@eotechinc]

Umm..Not that we know of. Good luck?

[@KacyColledge]

@@eotechinc 😆

[@mikef5694]

You have an ETA on the Scalarworks LEAP/12 mount?

[@Nicksarms]

How many slots are required for the eotech 512 any recommendations on what mount to get if I also want a magnifier?

[@vegitagt]

Does the 512 reticle sit the same height as the xps models?

[@AKguy74]

Yes

[@james1375446]

No Larue risers?

[@wilderness135]

carry handle riser

[@elijahb9988]

what recommendations for the 552?

[@robhegstrom9996]

Arms #63 my friend. They're getting hard to find but so worth it. Bauer precision may still have a small handful

[@pengwang2525]

4:05 Can he actually see anything? My EOTECH 3x needs to be positioned much closer to my eye.

[@tonyslaughter8954]

is there a way to put the EXPS and the G 30 to accommodate all at once?

[@anthonyjade8277]

cliffhanger riser, by noisefighters

[@chrispewkreme]

I prefer a 3’ riser. I can hip fire my rifle with a perfect hip weld. Jesus fuck these risers are getting ridiculous. People made fun of A2 iron sights with optics. But are now rising the hell out of optics to be just as high as on a A2 carry handle….

[@kalanipitmon7817]

Ok boomer

[@Mr.Reddit.R.Athiesm]

lmao youre fucking clueless

[@Robert_H_Diver]

You’re not wrong 👍🏼

[@locophoto6881]

Clueless...military been using risers this tall and taller since vietnam genius....won't waste time explaining it to the ones that don't want to learn or care to become knowledgeable before they say stupid stuff

[@TonyCantShoot]

Do you need the riser for the exps if I use the FTC Omni? Or can I use the Omni without the riser

[@shootingLemon]

Yea you do

[@Heywoodthepeckerwood]

You need a riser

[@dznutz50123]

When are we getting Exps-4?

[@eotechinc]

One fine day...

[@nickjames1090]

What riser option will bring my xps to a lower 1/3? Used to run a dot on a high riser and switched to an xps and I can’t stand the absolute cowittness 🤢

[@eotechinc]

I would say the AGM would be best for that.

[@fatheroftheclyde]

ADM

[@armon8399]

Shit. The scalarworks eotech mount that's about to come out is bad ass

[@Sun-Warrior1911]

Don’t think it’ll work well with the magnifier though!! Eye relief gotta suck!!

[@apanosetti]

LaRue Tactical Picatinny Riser LT101

[@eotechinc]

Good call!

[@peter15walsh]

Is there any issue running the lower Unity FAST riser with the XPS if I am not planning on running a magnifier? All the videos and things online are saying you need the FAST Absolute, but I don't think I want/need to go that high.

[@ramirogarza3rd]

That's what I do. Not too hight not too low

[@Heywoodthepeckerwood]

If you aren’t using a magnifier you can use which ever riser you like to get whatever hight you like with the xps. My son has an xps on the Unity riser on a mk18 clone and it’s the perfect hight for him.

[@ramirogarza3rd]

@@Heywoodthepeckerwood same. I have an MK18 clone and I use the smaller unity riser on my xps bc it's more aesthetically looking

[@dennisdavid9588]

I have an XPS2 and a G33 on a DD MK18. Somehow I’ve confused myself about which riser/s will work for this setup. I’d prefer not to go with Unity.

[@fatheroftheclyde]

ADM Mfg is a good option.

[@Petfromyigo653]

Any risers on the market that is possible to make a xps to a lower 1/3 ??

[@fatheroftheclyde]

Yes. ADM.

[@pmorin313]

LaRue..

[@sk8inrj1]

This video should have detailed riser heights for each product. This video assumed that 2.26 is what everyone is trying to achieve with a riser...

[@ralvis20]

Yup, just learned I made that mistake. Apparently GBRS is the ONLY one that carries a special 2.91 Unity FTC?? Then that goes with either of their 2.91" risers. Interesting

[@mynamejef7963]

@@ralvis20 unity fast absolute and exps3 gets 2.46

[@MoeTactix]

Every single riser is out of stock, I just want to complete my build 🥹. Definitely not buying the hydra as that one is the only one in stock.

[@FloorItDuh]

To be fair if you are using a LAM the Hydra is pretty good. I'm very happy with mine. Does exactly what I need. Worth the price of entry in my opinion.

[@koostory1776]

Recommendation for 552 riser???

[@jesusmendez1177]

LaRue Tactical Picatinny Riser LT101 is what I'm using on my 552.

[@zack9912000]

Some of these risers are getting stupid, we will be back to the carry handle soon.

[@-joe-davidson]

I felt the same way until I tried it out and it's so much more comfortable.

[@-joe-davidson]

@Cav Trooper 19D Sounds like expert advice. Topic closed.

[@eotechinc]

Truth!

[@eotechinc]

Agree to disagree...

[@eotechinc]

Nothing is ever closed as we are always learning, but we are happy if we can provide good people with good info. Thanks for watching!

[@krishnaramoo4794]

YHM .5" risers and no proprietary stuff so it's simple. You need to do a red dot, magnifier, and BUI's? Easy get 2 1.25" and 2 .75" long ones for way under $100.

[@armon8399]

The damn scalar works mount is always out of stock. Pissing me off

[@yuckfou5907]

It hasn't been released yet.

[@armon8399]

@@yuckfou5907 then it shouldn't be on the site with an option to buy it

[@MaudMyrna-j7v]

Myrtie River

[@DR_Iceman1983]

ADM XLR is hot garbage, only put 60rds of M855 down range, and one of the securing clips sheared off. Completely unacceptable for a mount that costs over $200 (titanium version). Save your money and buy the unity.

[@jesusmendez1177]

nah, you installed it wrong.

[@SierraMike78]

Eotech ludicrous prices. No thanks.

[@NicoleSmart-m3h]

Pfeffer Station

[@thechef19791]

Every gun guy now suddenly is running these risers regardless of a need lol. If all you do is shoot at the range, on a static station and target, you don't need a riser lol.

[@btumminaro]

They certainly don't need those ridiculous "diving board" LAM mounts that put the parallel laser zero 2' over the point of impact at 7 yards

[@bryanreed316]

You're right! But I think the idea is now about head placement and shooter comfort. If it's just for the range, it doesn't matter anyway.

[@Whiskey1029]

If your reading this go get a riser

[@lgdurocher]

If all you do is shoot at the range on a static station, you don’t need an optic. You don’t need a semi auto either.

[@WarpedNut]

Just get a warne riser

[@martin1234512345]

I refuse to buy risers. The amount of money they want for them is absolutely ridiculous. I dont use NVGs or any silliness like that. I live in the real world. No need. Would it be nice to have a flip to center mount for my magnifier? Sure. Can i live with it being a flip to side? Absolutely. Shame on these companies.

[@IronMan-ds5bi]

Agreed

[@hops2099x]

Cool story.

[@AnthonyD1986]

They have overhead and have to pay employees. Yes it’s not cheap but nothing with guns is.

[@PatrickBergensen-kali-yuga2005]

Okay old man 😂😂

[@Heywoodthepeckerwood]

Shut up for Christ’s sake.

[@GoWokeGoBroke2023]

hardpass, shit is silly