Which UNISTRUT TROLLEY is Right for My Job?

Save on Trolleys! unistrutstore.com/trolleys.html
Everything You Need to Know to Select the Right Unistrut Trolley System for Your Job - with Confidence! For answer to any design/engineering questions, please contact us directly. TOLL FREE: 1 [phone] | Email: [e-mail] | Unistrut Buffalo Supports is a division of Eberl Iron Works Inc.

[@s2f-spiritualfinancialfree785]

so much knowledge it this short clip. thanks for sharing.

[@greghill8354]

Well that was certainly informative,thanks. I'm going to use this to lift my snowblower and other stuff up into my loft. I've seen the specs on the rollers and unistrut and have purchased accordingly! Is there any other videos that deal with installation of this system,I have been looking for 2 weeks and have just ran across this video.

[@richhuntsd12]

Very informative and useful. Thank You

[@richhuntsd12]

Very well done, thank You

[@raydreamer7566]

I wish I could get this products in the Philippines. I used lots when I worked in Canada.

[@milesb4231]

Can you flip them upside down to use as tracks on a floor?

[@futbol1972]

Can I use thoese little trolley wheels with this? I wanna use it to hung up 2 punching bags in garage so I can roll them out of the way when not using them?

[@futbol1972]

Ok so I have a wired pool table light above my 9 foot pool table. I wanna get a ping pong top to play ping pong too but light is in the way.. I was thinking of adding a plug to the light and connect it to thoese retractable extension cords. The retractable extension cord will be plug in into garahe ceiling outlet...then I wanted to mount light on two unistrut rails with a trolley to move it out of the way whenever we wanted to play ping pong. Can this be done and do you think it will work?? Basically wanna move pool table light back and forth when playing pool or ping pong..that's why I wanna get the retractable extension cord so it can retract when rolling light out of the way to play ping pong or move it back to play pool.

[@jthlb]

I wonder if there is some UNISTRUT channels with Arc chape to use it to install curtain in winter to prevent snow from accumulating on floor of a half moon chape balcony?

[@rtz549]

They sell curved sections of track.

[@75novaguy73]

It says the #9 p1834 trolley track support/hanger can handle 1200 pounds. If I had for example a 5 foot unistrut, how many would I need to support and slide 1000 pounds?

[@futbol1972]

I would like to know if I can use this rails and trolleys to hung up 2 punching bags iny garage..I wanna be able to slide them out of the way when not using them...if I can what would I need to buy exactly to hung them? One is an 80lbs and the other one is 40lbs

[@eberlironworks857]

Hi Marco, people have definitely used them for this application. Please contact our customer service and we'll be happy to work with you to build a bill of materials and quote. unistrutstore.com/request-quote

[@mohamedbedear4247]

I build an application and I need an assist for materials selection, I sent email to customer service but no response since 2 weeks

[@jthlb]

Almost most of balconies curtains slidez on straight channels but i need half moon form of channel, how to do it or is it available in your store?

[@eberlironworks857]

Hi Joe, curved tracks are available as a special order item - please contact the factory directly with your request: www.unistrut.us/products/prefabrication-and-customization/guideline-for-specifying-curved-channel

[@MrKim-kv2vv]

Hmmmm, how much weight can, say 10 length, of uninstrut hold at its mid point?

[@markfernandes2396]

Use this curtain tracks

[@leeknivek]

I have a unique situation, wondering if this could work ... I have a back-to-back double channel, set vertical with 50lbs moving up and down the channel back and forth quickly. With positive pressure outwards, could rollers be set on either side? the entire assembly is stiff and supported, and the travel is only about 15" - the channel is only unsupported on that 15", but welded all around otherwise. I understand these are not designed or engineered to be used in this fashion, and I do not intend to hold you to any liability in asking, just curious. I have other options but am considering this route. Do you think it will work?

[@eberlironworks857]

Hi Kevin - thanks for your interest in the Unistrut Trolley System. If you have engineering questions, or would like to discuss product specifications/design options, we would advise you to speak with one of our representatives directly. 1(800) 285-3056

[@mattkriese3251]

I too am curious about using them vertically to bear a small load (about 20-30lbs). Any feedback once you looked into this?

[@TV-gy1nf]

I will certainly be using these. By the way, I like the music. What is the song and artist?

[@drunkinmaster1]

Sounds like Beautiful Boy from John Lennon

[@TV-gy1nf]

@@drunkinmaster1 thank you

[@johnanthony5393]

I use the unistrut system to hang punch bags, I would like to be able to roll them away. However I need a trolley with a lock when in use - is there any solution available?

[@eberlironworks857]

For answer to any design/engineering questions, please contact us directly. TOLL FREE: 1 [phone] | Email: [e-mail] | Unistrut Buffalo Supports is a division of Eberl Iron Works Inc.

[@ralph5118]

Very cool all wordless music narration, nice job

[@user-ew1gf5pj1d]

👍🇰🇷👍응원합니다

[@user-og7hf9hv7y]

Donde encuentro en la paz bolivia

[@user-qo3uj2fx5f]

한국에서는 어디서 구입해야하는데요

[@sunnyhiraofficial3055]

Hi where can I buy this from?

[@eberlironworks857]

unistrutstore.com/trolleys.html

[@garrettperez928]

If I need a 70’ trolley can I connect 14 of your 5’ sections?