White Power Ranger Helmet Build Summary

[@rickeymorgan87]

You have yhe best audio ive heard in a helmet

[@FischerBuilds]

Thanks, it’s the screen visor. It doesn’t inhibit sound or air. 👍🏻

[@vmiget01]

very informative video, thanks. im gonna start cosplaying PR now. i want my first to be Psycho Green from the MMPR comics. very cool idea with the hinge on the helmet.

[@scottieyang7942]

This video has been super helpful. I bought the White Ranger unfinished resin helmet from boochieboy and have never done anything like this before. Your video has been helpful in quelling so of the fear of taking this on. I'm still a little uneasy about the hinge aspect but I'm sure I'll get it figured out. I noticed that it looks like you had to cut a notch out of the helmet to make room for the hinge. Am I right? Any additional tips when dealing with the hinge is helpful.

[@djangusroundstone316]

I’ve never used the rivets. Can you maybe do a detailed video or recommend a video. I haven’t found one for the helmets.

[@FischerBuilds]

Djangus Roundstone kzbin.info/www/bejne/fGmQmqt5bJapd9U I actually know Dave. He did this video. He is on FB in the group called “The Power Ranger / Super Sentai Cosplay Buy / Sell / Trade”. He is a great builder and this video is exactly how I learned to do mine.

[@LuciferCain]

How do you install extra foam in the helmet?

[@FischerBuilds]

Sorry, I didn't see this comment. On a resin cast helmet, scuff the inside with a dremel or sand paper, then just hot glue.

[@ColossalSoundsTV]

How much to make me one

[@PinkThorn242]

Well, this is going to be really helpful for the Pink and Yellow helmets I'm working on (although the yellow helmet is going to need to have the neckline resculpted, I think).

[@FischerBuilds]

PinkThornVlogs I have a yellow MMPR sitting on a shelf for that reason too. Ears are warped too. We may have bought from the same person. Did their name include “0101” by chance?

[@PinkThorn242]

@@FischerBuilds ...Yes.

[@boochieboy814]

Could have gotten a yellow from me. The neck openings on mine are perfect :D

[@FischerBuilds]

@@boochieboy814 I didn't see this. I got my white from you and it was fantastic Jason. I have no doubt the Yellow would be awesome too.

[@huntercole3995]

Did you buy the registration keys or make them? And what brand paint and primer do you reccomend?

[@garzarate]

What did you use for the registration keys?

[@FischerBuilds]

Juan Garza 1/8 plexi glass. Cut into strips and rounded corners.

[@shortair84]

My wife has a pink ranger helmet she ordered. It was from Taiwan. So it has no airholes. And I'm wanting to either drill some or possibly try to remove the visor and potentially add this black netting you applied... Would I be able to drill at this point now that the helmet is complete? What's your opinion?

[@FischerBuilds]

adam ramos It is possible. I would tape the area and mark where you want to drill. If you have a hand center punch. That prestarts a drill hole. This prevents wandering. Then go slowly and it should drill fine. If you do it under the lip like the helmets have, you may be able to touch up if paint roughs up but take your time and you’ll be ok.

[@FischerBuilds]

Also, the net negates the need for air holes entirely. Maybe see how easy the visor is to remove.

[@shortair84]

Where did you get net from?

[@FischerBuilds]

adam ramos I got a 10 x 13 sheet from hobby lobby for $0.69. Yarnology plastic canvas.

[@Merjedmedia]

Its hard to get the hinge to work how did you do it

[@goddessjennifer1184]

how much would you charge to make a custom ranger helmet

[@vmiget01]

also thanks for the links. help ALOT =)

[@Jaduff82]

Did you use fiberglass on the inside of the helmet or anything to make it sturdy, because I’m trying to not use fiberglass lol

[@FischerBuilds]

Jaduff82 I did not, it was a very thick casting so it was plenty rigid. The white is a Jason Lopez (F5 Props) and the pink I did was an Eric0101, it was much thinner, and I didn’t use fiberglass on either and they both held up fine.

[@Jaduff82]

Thanks because I really didn’t want to use fiberglass and one last question I appreciate you for taking the time to answer. But what did you use for your registration keys and what did you use to attach them

[@bobbyfischer7609]

Jaduff82 I used a thin piece of plexiglass and rounded the corners. I scuffed up the plexi with sand paper so hot glue had something to grab and I etched a checker pattern in the helmet for better adhesion too. Hot glue and clamps is all it took.

[@Jaduff82]

Thanks for the info man

[@BeeRho]

The link for the molding is gone. Do you recommend another one?

[@FischerBuilds]

Its F5Propstore on Etsy...www.etsy.com/shop/F5propstore?ref=simple-shop-header-name&listing_id=547245980. Jason Lopez is the maker. His channel on KZbin is BoochieBoy... kzbin.info/door/5ROEQSLyn5M9iMgFZ7W_Kw. I think he cycles his offerings on Etsy. I would DM him and just ask. I know there are other casts available and i have tried them and wont recommend them. I can recommend finished helmet makers on FB if you are interested in a done one. Let me know. Hope this helps.

[@BeeRho]

@@FischerBuilds im trying to get the material to make my own. Watched alot and did my research but not exactly sure how to make a silicone molding without buying an already made cast to use as a base.

[@toddschmitz8496]

What is the width of the helmet?

[@assassinx6325]

How much was the kit?

[@FischerBuilds]

assassin x it’s been a few years. $100-$120. Not 100% sure sorry. It was from F5 Prop Store on Etsy. They don’t sell the white anymore. Just black and pink MMPR.

[@Plaindaybmx]

How much do you charge

[@FischerBuilds]

Ryan Benane I don’t do commissions. If you are looking to buy a finished helmet. On FB, look up Guillaume Willy in the “Power Ranger / Super Sentai Buy/Sell/Trade” Group. If he’s busy, he will point you to another reliable maker. Avoid Aniki and you should be ok.

[@beast_h2018]

I want to be a white ranger two I’m saving money this year two buy my cosplay of of ezcosplay