Who Is The BEST One Step Car Polish Compound

[@Detailing_Dogma]

⬇⬇ Use The Links to Support Future Projects, You Are The Building Blocks ⬇⬇ Thank you my Friends 🇺🇸 My US friends : ✅ Koch Chemie F6 : amzn.to/3AmQYsj ✅ DIY Detail Gold Standard : bit.ly/46JiyM4 ✅ Rupes DA Fine : amzn.to/40JGZHY ✅ Clean By Pan Spray Polish : tinyurl.com/529j23sz ➡ Polisher Here : amzn.to/3Atn8lV ➡ IPA Paint Prep : tinyurl.com/2877c5aw ➡ Micro Fiber Towel : amzn.to/40yrpPB ➡ Inspection Light : amzn.to/4fFhM66 ➡ Orange Pad : amzn.to/3YB7qND ➡ Blue Pad : amzn.to/3YFke5F ➡ Sand Paper : amzn.to/3YDTQsD 🇨🇦 My Canadian friends : ✅ Koch Chemie F6 : tinyurl.com/bdeuu3e8 ✅ DIY Detail Gold Standard : tinyurl.com/5yvthmmp ✅ Rupes DA Fine : tinyurl.com/2nb7rxs3 ✅ Clean By Pan Spray Polish : tinyurl.com/535b6erd ➡ Polisher Here : tinyurl.com/yt99shbt ➡ IPA Paint Prep : tinyurl.com/3ernydyp ➡ Micro Fiber Towel : tinyurl.com/42vxbcn2 ➡ Inspection Light : tinyurl.com/3punnh5u ➡ Orange Pad : tinyurl.com/3p4zfwuk ➡ Blue Pad : tinyurl.com/3p4zfwuk ➡ Sand Paper : tinyurl.com/2ruyhrbk This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission. ✅ Check Out My AMAZON Essentials www.amazon.com/shop/detailingdogma (affiliate) ✅ ❤ Creating high-quality content takes a lot of time and resources, and your support makes all the difference! If you enjoy the videos and want to help keep the channel growing, consider supporting me at buymeacoffee.com/detailingdogma . Every bit helps fuel more product tests, reviews, and the content you love. Thanks for being part of this journey! 💙

[@diydetailofficial]

Thank you for including DIY Detail Gold Standard Polish. In future, it’s very important to use only one spray. 2 will reduce cut, and make wipe off difficult.

[@YeahCain2]

I don't think 1 spray will cover the whole car though

[@arturia5976]

I think he meant 1 spray per time… not for the whole car

[@afonsofreitas3595]

​@@arturia5976Don't even bother to answer, too dumb to understand

[@diydetailofficial]

@@YeahCain2one spray per section. On a 3 inch pad like Frank used, 1/2 a spray is more than enough

[@aarongrantthebulk]

Hope you told forensic this too lol😅

[@ericgoodman9509]

Outstanding video. Using rinse less for polish or compound removal works amazing on any brands, not just DIY spray polish. We have been getting amazing results with Pans spray polish

[@Detailing_Dogma]

Thank you Eric. Appreciate your feedback sir!

[@bionax96]

Koch Chemie P6.01 cut & finish works best in almost every situation. It also acts as a sealant but still need some kind of extra wax or sealant afterwards just to make sure

[@rooboy99]

Scholl S20 black and Angelwax Regenerate are both very good one step compounds.

[@johng753]

One of the best compounding & polishing videos on KZbin! Your observations at each step are clear and informative. Lighting and camera work are first rate with excellent narration. A challenging test using tricky GM Black paint. Keep producing high quality content and you should reach 20-K subscribers very soon.

[@Detailing_Dogma]

Thank you John, appreciate your feedback and thanks for taking the time to let me know! 🤝

[@steveclark2426]

Great way to show how those 4 products work. I have been having great results with the DIY polish and their pads. ( I find it works best with one spray on pad and wash off every panel) I also use 3D one and have great working time. I love how easy DIY wipes off with rinseless wash. Looking forward to the ceramic coating show down. Keep those high quality videos coming!

[@Detailing_Dogma]

Thank you Steve for watching Video from beginning to end! We've 2 videos on coatings coming, 1 real world and 2nd on the panel. Cheers my friend ✌️

[@loic4691]

Nice polish battle, i really enjoyed your vidéos, keep up the good work and creating excellent contents.

[@Detailing_Dogma]

Thank you Loic, appreciate your support & feedback sir! ✌️

[@larsenttif]

I have tested all of these, except PTO since it isn't available i Norway yet. I couldn't agree more with your reflections. Spot on and great review. 😊

[@Detailing_Dogma]

Awesome Lars, I appreciate your feedback very much. Hope to see you on the next one ✌️✌️

[@felipe_silve]

Hey Frank, great video as always! Rupes Yellow Fine Polish in my experience is best to use with their yellow foam, MF or wool pad. Rupes yellow fine wool with yellow fine polish is great for medium cut on hard paints and has really smooth and forgiving action. It's not great as a one step though, as I believe it has no diminishing abrasives, hence why it does not finish great. I think their uno advanced would be best for that purpose. For efficiency, theres nothing that beats gold standard paired with their system. Rotary low speed with their red jeweling waffle pad has surprising cut with amazing finish.

[@paganmonkey4439]

Just purchased the F6 can't wait to use it respect.

[@Detailing_Dogma]

Awesome my friend enjoy & let me know how it goes!

[@gregory3227]

Perfect timing as I’m looking for a new compound to try out while Black Friday is alive

[@Detailing_Dogma]

Glad you liked it Greg, thanks for choosing my video!

[@BreezeMW]

Awesome video. This put my mind at ease considering I had a client wanting a 1 step polish last week on their white 2018 Mercedes GLE that I tried The Gold Standard on without much results at all. I started my test spot with a damp yellow DIY waffle pad on my 15mm Milwaukee and tried different machine/arm speeds without any noticeable results. I then moved up to the Purple DIY Wool pad and ran through all the same methods with very very little difference at all. I know Mercedes paint is hard but I had high hopes for the Gold Standard Polish but was let down considering the client was only expecting a 1 step and I felt it was achieving a result I was happy with. Although, I am staying optimistic and look forward to trying it on softer paint.

[@dustin3700]

Hard euro paint needs a heavy cut polish and usually a medium to aggressive pad.

[@BreezeMW]

@ ya I ended up going with Perfect Finish (which was actually formulated specifically for Mercedes paint) and spot treating with CarPro UltraCut. It just took me quite a bit longer to achieve a result I was happy with considering I was playing around with GSP but having no luck. I figured the wool pad would have done something as Yvan has never shown a vehicle in a video that GSP hasn’t “worked” on. Which was the reason I was disappointed but still optimistic

[@Detailing_Dogma]

Thank you Breeze, I use the gold standard all the time it's very good and fits my line-up of compounds. I like to have 2 or 3 options. see you in the next one

[@bobbycakes]

Pan, if your watching this.... he said WOW about 4 times. i didn't hear wow on others!!! $$$$$ Fire!

[@wilfredgomez2632]

To remove sanding marks I use CSI Ceramix, they do not come back, change pad and finish with the same compound.

[@404notfound.....]

Another excellent well done video!!! Appreciate the thorough testing. 👍🏻 🇨🇦

[@Detailing_Dogma]

Merci 404, happy that you liked it. ✌️✌️ talk soon

[@albertvelez6386]

I use Jescar and Scholls Concept S30. Enjoying the review

[@Detailing_Dogma]

Appreciate your feedback ✌️

[@supergrovah2729]

Love these comparisons.....I'm rolling this week with DIY's Gold Standard. I'm thinking it's aptly named.

[@gimaru1]

Nice to see a honest review although at first I thought there could be some conflicts of interest with the 2nd place products.

[@Detailing_Dogma]

Thank you, they're all winners in their own way in the end, F6 has just delivered slightly better results across this test only, the way I did it. Cheers

[@RaulMedina-b3d]

Thanks for taking the time to test the products. Maybe try good old turtle wax one and done compound? I've had great results on both paint and on vinyl wrap (piano black). Maybe I'll pick up some DIYs gold standard and give it a try.

[@mikewaters6980]

I was about to comment the same. I can’t believe I’m this impressed with a Turtle wax product.

[@Detailing_Dogma]

Thank you Raul. We'll have a v2 one-step vid soon

[@RaulMedina-b3d]

Cool beans ​@@Detailing_Dogma

[@jefferrrson1x]

Fantastic video man. I guess what you can do is cut w KCH and then finish w DIY and jewel pad. Two step!

[@Detailing_Dogma]

Thank you Jeff, glad you liked it. The pad choice has more influence on the results, you can use the same polish instead and do 2 passes with 1 cut pad and then 2more passes with 1 finishing pad for amazing quick finish.

[@stephanecormier9004]

Bonjour, J’ai écouté plusieurs de tes vidéos qui sont excellentes en passant, mais c’est la première fois que je commente. J’aime beaucoup ce type de comparatif et tu le fait très bien et surtout sans partie pris👍🏻 Je n’était pas convaincu des "spray" compound, mais les résultats sont assez impressionants👌🏻 Bref continu ton excellent travail et a la prochaine🙂

[@Detailing_Dogma]

Salut Stephane merci de choisir mes videos, content de t'avoir parmis nous en passant et merci encore pour ton bon commentaire c'est tres apprécié. A la prochaine mon ami. ✌

[@Morpheus02000]

I like 3D One a lot in combination with Uro Fiber 50/50 pad. Scholl S20 Black or Hybrid Solutions 1&Done is also a good one.

[@J1Z06]

I have a disaster detail going on. It's a 2010 Ford Escape Black. I'm getting a lot of haze after compounding with an orange pad. Haven't tried DIY/Pan's... do I need to follow up with a finish polish? Great video, thanks for sharing. I also have Koch Chemie. I received a bottle of Sonax Perfect Finish today. That solved My problem. Produces a beautiful, deep, haze free shine. Don't hesitate to use that if You haven't tried it.

[@Detailing_Dogma]

Hello Jay thank you for choosing my video. Yes when haze is present try to step down to a black pad or go with a softer polish. I can finish 98% of the paints with sonax PF and orange hdo. Cheers bud

[@J1Z06]

@ Thank You! I was referring to haze from compounds. PF never fails to deliver a beautiful finish.

[@svenschwingel8632]

I recommend to try out Sonax ExCut 05-05 or Ex 04-06. Both offer great performance.

[@angelagzx14]

Can you do a 4 way comparison between DIY, Clean, Nemesis and Hero rinseless washes ? If you could I will appreciate it very much. Just an idea.

[@orthodox1717]

Just picked is P&S Rehab Crème. Did I fall for the hype? Haven’t tried it yet.

[@Detailing_Dogma]

Hey Ortho, I'm not so sure about P&S since they are with the 3D family now. THey might have a very successful 3D one in their line-up although not my favorite product.

[@Sasquatch_by_Day]

I'm interested in if that works as claimed, I'm not a big fan of "one product that does multiple things", every time I have tried a dual purpose anything - be it polish/compound or dual purpose motorcycles - I wind up with a product that does two things at a mediocre level. But maybe P&S can prove me wrong.

[@orthodox1717]

I tried Rehab on my hood and it was very nice to work with! Finished great with a polishing pad on hard paint and easy wipe off! Definitely not the same as 3D One. Haven’t tested its correction ability.

[@Sasquatch_by_Day]

@@orthodox1717 When you say "definitely not the same as 3D One" do you mean better or worse than 3D One? I have a bottle of 3D One but I don't use it often as I have other products that I like much better.

[@orthodox1717]

@@Sasquatch_by_Daybetter. 3D One is very oily and doesn’t buff off easily. I have it and don’t really use it. Detailed Image sells an 8 ounce bottle of Rehab to try it out before buying the huge bottle…lol

[@afonsofreitas3595]

Awesome comparison. In my opinion a one step polish should never be used with a heavy cut pad, as the objective of a one step is improve as fast and best possible. Using a heavy cut pad will almost never finish without holograms/marring.

[@Detailing_Dogma]

Hi Alfonso thank you for tuning in, appreciate you. I agree with you, if you're making reference to the Blue HDO it's a middle of the road foam pad after all. It sits below the OSP, the MF pad and the Wool in the Lake Country Line up. It's definitely not a heavy cut IMO but a solid one-step pad. Depends on the paint system but yes it did indeed cut quite a bit on this particular GM Black. The same type of pad were used across the test so each product had a fair chance. ✌️

[@seabreezeof]

4 for me 1) Rupes 3 in 1 Ono, 2) Phoenix Papa Cut deminishing cut dependent on pad, 3) Sonax Perfect Finish 4) Jescar Correcting Compound

[@svenschwingel8632]

Sonax has other great products for polishing. ExCut 05-05 or Ex 04-06. Both can work over a huge range if worked properly.

[@dtna]

Did you pay for the Clean by Pan product, or was it a freebie?

[@Special.Purpose.Weapon]

Pan has been slinging more of this to KZbinrs for free than my ex wife did poonanny to everybody in my county

[@Detailing_Dogma]

Refer to the description

[@joeschmoe6908]

Meguiars M100. Marketed as a heavy cut (and great with a wool pad), but with a medium pad it finishes very well. Works fast, amazing wipe off, and very inexpensive. Only downside is dusting, which can be a deal breaker for some. Personally I don't care.

[@viperrcr]

Nice thorough review as always Frank! Some great options. Have you tried Adam's Sprayable Compound? I have not, just wondering if anyone has and if they may have used it as a one-step, in a pad dependent way.

[@Detailing_Dogma]

Thank you Rob, never used adams compounds. Appreciate you my friend

[@TheRubb3rbandmanx]

I used Adams about 4-5 years ago. If they havnt updated it I didn’t like it. It had very weak cutting power

[@orthodox1717]

What kind of detailing light is that? Thanks for the video!

[@Detailing_Dogma]

it's in the description my friend

[@Notdb1gabe]

Oberk sole is my go 2 single step

[@Detailing_Dogma]

I'll order it soon and get a V2 1-step vid, thanks for tuning in Gabriel

[@mattsmagicdetailtechaustralia]

When my All Rounder Green Pads in 3, 5 and 6 inch diameter are in stock (being made in a few weeks in Europe by one of my several foam chemical/foam manufacturers) I would love to send you a few to test as these are my answer to the SDO/HDO Blue and all other brand's blue foam. Did you know that the SDO/HDO blue pads originate from a French manufacturer I started buying from in 2014 prior to LC sourcing them and modifying their design. My Green foam has the same or slightly more cut but more thermally stable and finishes a little better. Regards Matt The Pad King. PS Koch H9 75%, F6 25% is a combo I liked when I had those products in my arsenal a couple years ago. Try it

[@Detailing_Dogma]

send me an email we can talk, thanks for watching.

[@מדינט]

Great review. The Rupes Fine is not the right tool here, I always use COARSE to remove defects and I chose the pads and technics by the severity of the defects. Fine for me is just for finishing.

[@Detailing_Dogma]

Hey man, appreciate your feedback. Rupes Fine has some bite and is definitely more than just a finishing product, in fact Rupes swear by it's cutting ability when paired with different pads for different paint. I had great success before using on harder paints, it just didnt work great on this GM black. P2000 grits were removed with ''fine products'' or medium compound this is how you know you dont need heavy cut products on this paint. ✌️✌️

[@TheSf49erfan]

I saved this video so I can think about which one of these I will be purchasing this spring for when I take my car out of storage. I am planning on putting a ceramic coating myself..I believe the steps before doing so are to wash the car, iron remover, polish & then ceramic coating…are those the steps before applying the ceramic coating, Frank? Do you have a video link on how to prep a car for it? Another fantastic video, Frank..thanks again for taking the time to do this for us all!

[@Detailing_Dogma]

Thank you my 49er friend, all pleasure is mine. I'd add to your list, ''decon'' as in clay towel as well, and finally paint prep specific to your coating before applying it. see you on the next one ✌️✌️

[@AmirAbdullah]

A few others 3d one , Menzerna Cut force Pro, Phoenix EOD papa cut and a host of other hybrid compounds that can give excellent one step results.

[@bigmario7065]

Awesome review frank, koch chemie never disappoints, in my opinion. I hv several products of them and all work amazing. Keep up the good work! 🤝

[@Detailing_Dogma]

Thank you Mario, glad you liked it. KC is a solid brand for sure among others. Cheers brother

[@RowlandPeters]

Great comparison! I have not used KCx F6, but I can vouch for the H9 and M3 combo! Might have to pick up a bottle of F6 to round out my collection 😅

[@chrisbradley3224]

Do you ever find you can’t remove H6 marks with M3?

[@Detailing_Dogma]

It's very versatile indeed and better price in EU for you Sir. Appreciate the support. Thank you Rowland for being a regular. ✌️✌️

[@RowlandPeters]

​@@chrisbradley3224depends on many factors my friend! Could be paint hardness, the amount of passes, moist or dry pad, the pad used, pressure etc. Haven't had that problem as of yet!

[@chrisbradley3224]

@@RowlandPeters Glad to hear, thanks for sharing your feedback. I haven't had that issue yet either but sometimes I'm questioning which I should reach for since M3 does not have all that much cut.

[@DairylandDetailing]

You should really think about trying Rehab from P&S.

[@Detailing_Dogma]

I'll order it and get a V2 one-step video for you. thanks for tuning in

[@alanhefter4659]

Does the 365 edge less work well for removing ceramic?

[@Detailing_Dogma]

For ceramic I'd look into a pearl weave coating removal speecific towel. Everything else 365 is great.

[@perrybruce3204]

What machine and pad are you using?

[@Detailing_Dogma]

it's in the video description Bruce! thank you for tuning in!

[@perrybruce3204]

@Detailing_Dogma ok I appreciate it 🙏

[@conics1894]

please do P&S rehab since I am thinking of using it in my detailing business

[@Detailing_Dogma]

I'll order it soon and get a V2 1-step vid for you, thanks for tuning in.

[@conics1894]

@Detailing_Dogma you are the best! Much love from the Philippines!

[@aldaley3537]

One spray of the DIY Detail product will result in a better cut easier wipe off.

[@jsheets4ua]

What causes the Haze that u showed near the end on some of them ?

[@Detailing_Dogma]

Haze is a defect left by the combo of the pad and polish on this specific paint. I could have used the same combo on BMW paint for example get completely different results. Ideally we want a haze free finish, theres different way to get rid of it but usually you'd need to step down your pad or polish or both.

[@LilRick96]

My Go tos for 1 steps: Cartec 9000, Oberk Sole, Fireball 1 step compound, Zvizzer MC

[@Detailing_Dogma]

Appreciate your feedback ✌️

[@victoryensured7137]

Awesome vid Frank! From these I have the Rupes Fine and DIY Gold Standard, haven't used these yet. I worked lately with 3D One as i have 500ml of it and need to use it up, It's ok but i don't like the scent (it's in the pads man..offf) and the wipe off even with rinsless (maybe im using to much), but correction wise it's ok. I used exstensivley Sonax Ultimate Cut (a really good compound), Zvizzer Heavy Cut (also a great one), KCX H9.02 (my fav), Cartec was nice also, Perfect finish is my fav finishing one and with more agressive pads it can even cut a little. Haven't used Rupes DA coarse from the HLR set either :) Cheers bro!

[@Detailing_Dogma]

Vic you're armed to the teeth brother. I need some of thst Zvizzer when THOR brings it here. Cheers man

[@jlb3675]

DIY's you used too much product. Only one spray and that is on a larger pad even. So that is why I think it was a harder wipe off and greasy.

[@Detailing_Dogma]

I stand behind what I said. Not like I haven't used the polish before. It's generally oilier and harder to wipe off, just is.

[@Sasquatch_by_Day]

There is a just released product from P&S that you could test against the winner of this comparison - P&S Rehab Correction Creme. You know, when you get the time. I'm sure you aren't that busy. (I don't know how to type in sarcasm).

[@Detailing_Dogma]

Hey Squatch thank you for watching as usual, im already looking into rehab, sole and others for that. I wanna do heavy cut compound pretty much all categories. cheers ✌️✌️

[@Sasquatch_by_Day]

@@Detailing_Dogma Awesome, I look forward to it. You are fast becoming my favourite detailing channel.

[@Detailing_Dogma]

@ thank you brother

[@jadrutjadrut]

nice review i use all rupes pads and machines on black paint da fine leaves haze but its maybe me am not a professional so i use sonax perfect finish and surface p40x for finishing rupes da coarse for cutting and surface p-15x for one step or sonax perfect finish .

[@Detailing_Dogma]

Appreciate your feedback ✌️

[@WillieBeamin-t4v]

For one step try perfect finish

[@LH44985]

Here in Europe, Koch F6 it’s not great at all, Rupes da fine for me has worked better with rupes pads and flex force rotation. But the best one step compound/polish is Scholl S20. The best “medium” polish after a hard cut with a compound, CARPRO fixer. Quick disclaimer, I work only on hard German cars clear coats.

[@rooboy99]

S20 black, is rarely spoken about but is a great one step

[@Danny-xj5ts]

3D one all day!!!!!

[@Youdontknowme-xc8mu]

I was told it's the same exact formulation in DIY detail except sprayable

[@viperrcr]

@@Youdontknowme-xc8mu I think they might be different, I believe 3D One will stain trim if you don't tape it, whereas DIY Detail will not stain trim. Wipe off is very similar, both are better with a rinseless dampened first wipe.

[@fracture589]

​@@Youdontknowme-xc8mu "I was told" well whoever said that must be related to Pinocchio because they literally just made that up and you for some reason believed it.

[@DriggettPhoto]

Please try 3D ONE.

[@afonsofreitas3595]

Awesome Product, coupled with 3d speed to finish, is even better

[@igneousc]

same formulation as DIY

[@afonsofreitas3595]

@@igneousc Really? White labelling?

[@igneousc]

@@afonsofreitas3595 Ive seen a bunch of people on reddit detailing channel say it, so I could be wrong but I think its identical just not in a spray bottle

[@pshhyeahh]

That's what I use. Does a very good job. I also have BlackFire Compound that I use as needed.

[@robl6044]

Great video thanks for sharing 😊

[@Detailing_Dogma]

Thanks for choosing my video Rob!

[@SnakeDoctor5104]

No love for 3D One?

[@Detailing_Dogma]

I ran out of it. It was bested here by a competitor kzbin.info/www/bejne/pIfIZoNrh6mMack

[@davestewart9146]

You made this test as fair as possible, great video my friend, thank you 👍😁

[@Detailing_Dogma]

Thank you Dave, thanks for taking the time to leave your feedback. Talk soon✌️

[@aaron30569]

Where is 3D one

[@Detailing_Dogma]

Was out performed by F6 in a previous video, appreciate you tuning in. kzbin.info/www/bejne/pIfIZoNrh6mMack

[@elayswisa]

Rupes should work in low speed

[@Schwabz33]

The Rupes Yellow is not a one step….Not why you did not get there one step.

[@Detailing_Dogma]

Okay, is a sedan a car? Per Rupes Website : - One-step light defect removal and finishing on most paints

[@jeffc6832]

I know there's a million products and you have to draw the line somewhere...but I think P&S Rehab and The Last Cut Compund (regular, not Plus) would have been cool to see in this test. RUPES DA Fine isn't my favorite, but I've used it enough to know that it has a pretty short cycle time and its even shorter when running the machine at full speed. It really is optimized for Speed 2-3 (on the RUPES machines) with their pads.

[@Detailing_Dogma]

Hey Jeff thank you my friend, Rehab came out after the P&S was acquired by the ATG group im not sure I would give it a try. I'd like to get Oberk Sole at some point we'll see, it seems people are loving the polish compounds videos. Exactly my thoughts for the Rupes Fine I'll leave it at that 🤣 cheers ✌️

[@Ayush-Hazarika-7777]

For me Meguiars ultimate compound is the best👍💯

[@SalvadorSTMZ]

Yeah 1/3rd the price and just as good results. Meguiars easily wins. Sonax beats all these in terms of finish anyways.

[@Detailing_Dogma]

Appreciate your feedback ✌️

[@hartlanddetailer5670]

Frank, I like to use American Made products by American companies. With that in mind, my go to Compound/Polish is 3D One. Thank you!

[@Detailing_Dogma]

Awesome brother, glad 3D one works for you, thanks for tuning.

[@1stfrompuertorico568]

First!!!!!

[@Detailing_Dogma]

✌️✌️

[@MrCoiledcobra]

In your opinion how does the ktc f6 compare to sonax perfect finish for finishing ?

[@Detailing_Dogma]

Thanks for choosing my video Cobra. F6 is more of a medium compound while Sonax PF has very little cut or almost no cut on harder clears but truly awesome gloss and easy wipeoff. I use PF for 2 steps as 2nd step or when a polish is needed but no real defects are present like a maintenance polish. hope that helps.

[@MrCoiledcobra]

Thank you , yes that help a lot ! 🙌🏻