WHOA! This thing was truly built for speed

Taryl's home made track sled, snow dog, snow kitty whatever you wanna call it is in its final stages finally before painting and this thing is FAST now. Taryl goes over how he figured the gear ratio and ended up getting more speed out of this beast than he needs. He tries it in snow and on a nice sunny day as well so you can get a feel for how well it performs in both weather conditions. Check out parts 1-3 for the full build. And There's Your Dinner!!
Subscribe Today for all the latest videos! (Click 'Subscribe' on this channel!)
TFA Skits Channel: / @tarylfixesallskits
FACEBOOK: / tarylfixesall
INSTAGRAM: / tarylfixesall
MERCH: www.TARYLFIXESALL.com
THEME MUSIC: tarylfixesall.bigcartel.com/p...
Get Your Parts From
www.ProPartsDirect.net and Tell 'em "Taryl Sent Me!"
#tracksled #homemade #tarylfixesall #engineering #gearing #ratio #gearratio #snowdog #snowkitty #sled #motorized #power #fast #toofast #DIY #custombuild #toofast4u #grassratsgarage

[@TarylFixesAll]

Use code APRIL for 10% off in the Taryl Apparel online store! Todays the LAST day! www.TARYLFIXESALL.com

[@danielprivate7442]

Whatcha buildin' there on the other side of the shop?

[@jimbagle.3939]

I love this build.

[@clemensbruckner8826]

COOL😂

[@daneyre5813]

Wow. That's quite the addition on your shop! Don't look like you're retiring anytime soon.

[@drunkingsailor2359]

Yeah I don't recall him saying anything about it.

[@mrmet6357]

Ronnie's business must be expanding and needs a lot more space!!!

[@BryanPAllen]

That building or addition looks pretty large and tall enough for lifts

[@BryanPAllen]

@@gfriedman99 Grass Rats Brewing Company

[@ronmurphy9819]

I think that snow kitty is a pretty cool build. I’ve got a couple conveyor belts. Probably enough for dozens of those but I’ll start with one. Heavy duty too. I could build a trailer for taking the trash to the curb. I’m already doing it in my head. If I get it completed I’ll send a picture. Thanks for the inspiration. It looks like a lot of fun too. My wife thinks I’ll never grow up!

[@dave4943]

Nice job Taryl! Looking forward to the evolution of the snow kitty! It lives again !

[@matthewpiper1421]

Taryl, that thing is sick, awesome build.👍👍👍

[@korhing1066]

Taryl Sunday Night is my Favorite I look forward to seeing your Fabrication skills and your willingness to share your knowledge Thank You

[@stanleyrunyon]

I just LOVE your videos! I'm a retired Master Locksmith, just now learning how to repair small engines (a fellow Hoosier, transplanted to Texas). Your videos are very informative, and so entertaining that it makes watching other (grass rats') channels boring. I appreciate what you bring to the industry from all your accumulated experience. Next time I visit my friends and family in Indiana (Brazil, Rockville, Indianapolis), I'll make an effort to visit your shop.

[@guybarriault3304]

Good job on the snow kitty Taryl , you have good ideas when it comes to fabricating stuffs, keep on doing it.

[@antoniomarc7174]

Awesome love it great little project piece…👍👍👍

[@goldchain879]

No more excuses for being late LOL love your channel bro the professional know-how with the comedy you can't beat. Or replicate. Appreciate the hard work you put in to keep us knuckle Busters informed.

[@terryconnelly1682]

Another inspiring video! Great video.

[@barrypettit3668]

Pretty cool build, enjoy all your videos. Always learn something from you Taryl

[@georgehofgren6123]

FANTASTIC Video 😊... love this channel just for this type of stuff. Wicked good idea on a walk-behind grader (!). Watching him flying up and down the road... downright hilarious 😂 😅😂

[@michaelglynn2638]

I laughed out loud when it hit 25😂 great job, loved the whole thing👍👍

[@jebjeb7770]

Fantastic accomplishment! Thanks for sharing with us!

[@beanolatte2682]

That is soooooo friggen AWESOME!!

[@edreimer4058]

Wow nice! Snow plow kitty needs more track!

[@kyronfontana8974]

Love your creativity and your videos mate

[@breikowski]

Dang! Nice addition going up! Plenty of room for costumes and makeup!

[@paulravitsky2898]

Drilling the shaft to allow the set screw to clamp to the divot in the shaft is a good idea. It also makes it easier to remove the sprocket at a later date because the set screw doesn't mar up the shaft. Another method of securing the set screw is to put a second set screw on top of the first set screw. I found out the hard way that older Wheel Horse tractors did that. Nice build!

[@n8BDetroit]

OMG that’s so so cool! It sounds awesome when you take off too I’m surprised

[@seanmckay3392]

i know that lil flathead sounds pretty mean dosent it

[@michaelstrange8165]

Wow!!! I think that says it all! Thanks for a terrific build series!

[@joetech4054]

Thank you, thank you, thank you for spelling ‘whoa’ correctly (unlike so many other KZbinrs)! Also, I watched the original build a while ago and that thing is still cool af!

[@geezus1201]

Thats a very cool snow kitty

[@chrisprobert6]

Bloody marvelous!👍

[@Patrick4959]

grouse stuff Taryl mate cheers from Australia 🐨🐑🦘🌴🌏 to your area and it looks good with every detail in the engineering department well explained etc.

[@ihus9950]

Nice job Taryl, awesome build👍🏻

[@IFIXCASTLES]

Sweet !! Looking forward to seeing it later down the road!

[@handyhippie6548]

i love the surplus center. i have bought tires and wheels, the same keyed shafting, sprockets, and a bulk roll of 420 chain you got and pillow bearings, their $50 179cc snow blower engine with a centrifugal clutch for a go kart i built, lots of hydraulic components for other projects, as well as switches and electrical components. i flatten out the packing paper, and roll it up because it makes excellent masking paper for when i paint things that costs me nothing. this sno-kitty should be tons o' fun come next winter.

[@whowho7969]

Awesome that thing looks fun 👍

[@Davidjb37721]

Thanks for your help and time

[@chatrkat]

Kinda like the Wright Bros. building that first airplane. Keep improving the design until you’re satisfied. 😁 Nice job Taryl, the machine turned out nicer than I was expecting. The hydraulic disc brake is slick, and sure stops well using the jackshaft for the rotor. 👍🏻 I’m looking forward to the next chapter on this.

[@toddjacobs5660]

Things pretty cool 👍

[@adamvanostrand2664]

Snow kitty is awesome and fast! ...looks like you're building a big addition to your building. More inside square footage 😊

[@davidbrennan5]

I think some of your best content is the custom work and projects you have done. I was told to improvise adapt and overcome when I was younger by an older guy, I think it was a Navy Seal Motto, this always stuck with me. Now I am the old guy and passing on knowledge to the next generation....

[@minelabex11]

i watch all your vids and love them your a real talented guy i have learned a lot keep them vids coming

[@jmaxim80]

By God, I love ya Taryl, you're a genius, I rekon

[@joeseliga1900]

Looks really fun to ride.

[@petecolborn4289]

The thickness of track actually extends the circumference of the drive wheel so your wheel size is much larger.

[@sandmanbub]

Got an idea that would help in really deep snow. You can run right up to a snow bank and not get stuck. If sitting idle on the snow and the snow dog sinks in a bit, no problem. The idea is mounting a ramp in front of east track. Trailer fenders could be cut and mounted upside down or they could be fabricated out of heavy gauge sheetmetal. Can the tracks can not be lowered for more ground clearance? Some skis to replace the wheels with might be a plus. I like your machine and hope to see more progress. If you get yours dialed in in a way that works for you, I might copy it lol. Much easier to let someone else do the R&R. ;)

[@kevinpeterson4098]

Always learning more every video! Thanks for the Video! I just got done chasing a gremlin on my mini bike. It would start for 10 seconds then shut off. Found out my metal sharp edge engine cover was cutting into the spark plug wire and grounding out the motor. Had me cleaning my carb and drilling a small hole under the gas cap. Lol

[@nickyost1056]

That's pretty cool. I love the show Taryl you should make a racing mower.

[@sandmanbub]

Taryl, I bet your man with the mill has a ton of spacers, collars etc laying around. I'd ask him if he has any he doesn't want. I ended up with several five gallon mud buckets full that way. I was 15 years old and dumpster diving outside of a machine shop and the machinist came outside and we talked a while. He was really nice and appreciated my interest in the same things as him. He offered me more than I could fit on the home made trailer I was towing with my bike.

[@robertfinnerty7201]

You could add an aireator setup under the riding section and use it to airate lawns. Your weight from drsiving it would allow the tines to dig in. You probably have a broken airator in your stash of old broken machines. Also consider mounting a set of skis on the cart for snow use. An old pair of skis cut down to say 14 inches long would do well. Keep up the good work.

[@jaryljackderriere1232]

Nice job on the build. Looks like ol' Snow Meow is a blast to ride.

[@gordbaker896]

Great Ride!!! Get a Windshield made up from ¼ " plexi. Tool box ahead of your feet and a ramp up front for airborne activity. 2" ball hitch and receiver.

[@mikemoore9757]

Taryl, you are using a Torqe-a-verter, so you don't want to use the engine rpm in the speed formula. When the engine is running at it's max rpm, the Torqe-a-verter is in over drive and it's small sprocket is actually rotating faster than the engine. Read the manual and it will explain how it goes from reduction to overdrive. You have to determine the rpm of that small sprocket when the engine is at max speed. Hope that helps. Be careful on that thing. It's a real jungle out there!

[@richardbrobeck2384]

Nice Build !

[@jjock3239]

You're so smart, Taryl! The machine runs well, and it is too bad that you can't get a little more ground clearance, even a couple of inches would make a tremendous difference.

[@kennethperian4370]

Great job showing and telling, keep up the good work and ideals . Have a great day see ya next time see ya bye.

[@robertmedina6875]

I see you’re building a beautiful new building! I’m so happy for you you must be excited! I can’t wait until I can build my own building right now. I’m stuck renting a building for my stuff. I don’t like renting, because at any time you could be thrown out! Let me clarify the building is for sale that I have.

[@mikemorgan5015]

Very Cool build! I think your extra speed is from the final drive diameter with the rubber track installed, not the sprocket alone. So basically the height of the top of the track at the center of the final drive track sprocket. Amazing how stable it is at that speed. Steers pretty well too. Just a great build.

[@keithstudly6071]

Agreeded

[@joseph.d5187]

I also was thinking the diameter of the belt in a circle as well for the final input value. Or not. Anywho so glad to see your video. No worries about the wait, it was well worth it Mr. Dactyl.

[@leosweeney7955]

Ya, when he said the cog dia., I thought he should include the track thickness also.

[@mikemorgan5015]

@@leosweeney7955 The more I think about it, the less confident I am.....haha! Nope, I'm back to where I started. But I'm willing to examine evidence against my position.

[@joseph.d5187]

@@mikemorgan5015 Actually I think the drive track diameter when it is rounded should be the input. It is actually just a flattened wheel.

[@chriswagner6310]

You guys are awesome

[@warrenvalentino5763]

great video! Awesome project!! is there a such thing as going to fast?? LOL! Thank You for the info in this video. Love watching your videos. one man's junk, is another man's treasure. there's your dinner! :) :)

[@im-that-guy-pal]

Damn that thing is fast!

[@serious2204]

Very cool Taryl ,

[@scrotiemcboogerballs1981]

Great video thanks for sharing

[@mopar65pa]

That's cool!

[@vernonearl]

Back when they still used the Osh Kosh Snowfighters here in New York, the V-plows had a shoe that was mounted on the point of the plow. It was turned up in the front so that it wouldn't dig in if it hit the ground.

[@SouthFlorida4DoingLife]

Pretty sweet Taryl, oh yeah I just love your skit channel😀, frigging hilarious!!!

[@gibsonbrigh]

Always watching. Them plastic track sprockets on a freezing cold day like up here in the north. Would break real easy.

[@huntnfishnuts5880]

That's the best all terrain mobility scooter ever built, that thing is awesome 👍

[@perrymattes4285]

Always puts a smile on my face.

[@444chroma]

What a BEAST. Next season it will get revenge on the snow

[@rustygun223]

A nice boat seat with out the swivel would be a nice addition

[@t-bear1863]

Whoa ya got an addition goin on. Cool.

[@bobg1219]

I would consider adding an internal shaft to the seat pedestal tube with a spring so your seat has some suspension to save on the back a little.

[@Boobtube.]

yep, need some seat suspension.

[@sandmanbub]

I agree. There are some motorcycle seats that have their own springs. They're used on some hard tails.

[@Boobtube.]

a motorcycle front fork spring comes to my mind.

[@bobg1219]

@@Boobtube. that would work if strong enough to hold his weight

[@bobg1219]

@@sandmanbub thats not a bad idea

[@markking3546]

The 7 1/2” dimension might be wrong. The thick track adds more diameter to the final sprocket. Measure from the floor to the top of the track. Keep up the great content!

[@mikemorgan5015]

Didn't see your post before I said the same.

[@robertmedina6875]

Hey when you add a headlight, make sure you add a incandescent headlight. Just my opinion. Here’s why an LED headlight will gather snow over it while you’re snowblowing and it will not melt the snow so you will have to clear off the headlight constantly. I know this because I added LED lights to my snowplow, and I had to switch back to incandescent. Great video !!!😊😊😊

[@rickyh4796]

Wow that thing is fast

[@brianbloom1799]

I really like that thing, That should go good though the woods also,

[@6hu6r]

Looking good

[@edwardranno7119]

That thing really flys

[@geraldtuck8864]

As always great knowledge and entertaining.😊

[@baronclime6423]

Looks like a heck of a shop addition is happening. The snow kitty is a little ripper.

[@drive42]

I had a landscaping buggy with tracks that I used to work on irrigation center pivot systems. It was 28" wide and would just fit down 30" rows. It sure beat carrying a gearbox or tire into a broken pivot in the middle of a corn field. The beach groomer machine reminded me of the pivot buggy. I am kind of surprised the snow blower tracks hold together at 25 mph, but I guess I got to, since I seen it with my own eyes (stolen from VGG)

[@Rein_Ciarfella]

Looks like you're adding a huge, high addition to the shop! How about a video on that build?

[@Wayoutthere]

Noticed that to.

[@GuysPlayingWithTools]

That's a pretty great toy. We don't have snow, but I am going to have to consider a wheeled version, it looks too much fun.

[@doseven]

You could add a longer starter rope and move the pull start handle up onto the handlebars like push mowers have. That way you can start it from the seat maybe.

[@MitzvosGolem1]

Awesome 👍

[@Rein_Ciarfella]

As you were speeding around I had the Beach Boy’s “Little Old Lady From Pasadena” playing in my head. Go Granny Go! 😂👍

[@kevinleee3408]

That's some good looking packing paper after

[@EliminatorPerformance]

That thing shoots a rooster tail, awesome!

[@mike.4277]

Awesome video 😎👍

[@joekrim6557]

ASE needs to add certification for Small Engine Repair. i stopped certifying since i retired...30 plus yrs ase master, toyota pro tech. you are awesome. you would make an awesome instructor. i taight automotives at a a community college for gm, toyota and chysler and you would have made a great addition to our department. now i play with small engines

[@nickmcconnell1291]

Sweet!

[@keith102955]

Now That’s cool

[@577buttfan]

That thing looks like a lump on the head.Exhaust blasting right in your face i love it!!

[@pyrog.c.c89]

You are a genius 🇺🇲

[@waiting4aliens]

Good vid, thanks.

[@Rebar77_real]

Good to know those tracks will hold together at that speed, so far. :p

[@RogerRozellCharbonneau]

31:17 if you hit something solid with that, you're gonna go flying

[@fasteddie8782]

That's awesome man what a nice build...must be fun to ride

[@TheHobbyShopFilms]

One more thing for next winter, the trailer with the seat needs some skids for the snow. Maybe some removable snow skis the go under the tires. I think in the snow, the tires are digging in to much. I like the angle on the front plow, but just needs some skid plates, spring loaded tilt would be useful also.

[@BigAlWillis]

Pretty cool

[@patrickmcdermott6802]

Awesome build!!

[@noelwarner1235]

Thats insane 25mph!

[@jeffpiatt3879]

What an achievement! I bet that puppy is a rush at 25mph!

[@robertboggs8142]

Jolly good show mate

[@william1252]

That things cool. I'd like to cruise around my neighborhood on one of those.

[@richardmarcelino238]

I love what you did there bro maybe you could put that motor and track in the back and Bill you a front and put snow skis on it and make your own snowmobile