Wow how did I miss this invite. This was awesome meet up
@thetwostrokerebuilder2 жыл бұрын
Bridge got hot. Most likely from small air leak. Those plastic vforce can cause it. Good to use thin coat of motoseal on them.
@paullavallee16312 жыл бұрын
Great shop to hang out at, hello from Canada Morgan !
@highlandcycles2 жыл бұрын
Hey there!! 🇨🇦
@jeremymullen53782 жыл бұрын
🔥I’m thinking cylinder had a wound on the bridge exhaust side from b4, they put new top end and slapped back together🔥the air filter situation just cause pre mature wear and she got hot🔥👊🔥🔨⚙️👊
@200xcBruce2 жыл бұрын
Extra air from air cleaner it ran lean and sand blasted.
@highlandcycles2 жыл бұрын
Yep
@donalddonaldson7211 Жыл бұрын
I just did the same thing to my 2016 TC 250 I pulled the cylinder off and the rings are almost gone the piston is in surprisingly good shape just two front seizure marks in the front and vertical lines all the way around I wish I could send a picture lol. Hey thanks for all your videos Morgan!
@tedking97932 жыл бұрын
gOOD jOB!! It is not about just fixing things. It is about learning,(and teaching), why this may have happened. We try to impress on folks that the only "DUMB" question is the one you didn't want to ask. Usually, dumb questions will lead to a lot of good education and information. Us guys just can not stand to think we may not know something. More that a few times when talking to a gal on the phone I will say..."He is sitting there asking you questions, right"? I tell her to let me talk to him, I won't make him feel like an idiot.
@highlandcycles2 жыл бұрын
I hear ya. It’s all about learning
@painsrides36162 жыл бұрын
I blame it on a clump of grit mixed with 2T oil that got through from the open air box.... the kid is off the hook😉
@highlandcycles2 жыл бұрын
Hahaha
@jvincent19602 жыл бұрын
Did you check the ring groove? Maybe the dirt packed up behind the ring and put too much pressure on the bridge.
@highlandcycles2 жыл бұрын
Good idea
@bloomerb41622 жыл бұрын
Ended up being a lot of water in the carb on 22 tc 250. Previous owner had vp gas in it. I've seen a few bikes now that have sat for a little while with vp and the bikes wouldn't run.
@highlandcycles2 жыл бұрын
Good to know
@donalddonaldson7211 Жыл бұрын
Maybe from the extra air from loose filter and sand. Once I pulled my cylinder off my yz125 and the ring was turned around completely!
@1speedonly2 жыл бұрын
One has to wonder if the holes in the piston which are there to lubricate that area got some dirt in them which lead to the failure.
@highlandcycles2 жыл бұрын
They were clean now but who knows
@IPILAINZ2 жыл бұрын
Do you have something against wiseco pistons? Is vertex a better piston?
@highlandcycles2 жыл бұрын
Vertex is much better
@jangoreo2 жыл бұрын
“Fresh top end low hours” Translate “Just put a new piston in it and found the cylinder is junk, should run a few more hours”
@chrisvillarreal2752 Жыл бұрын
Is there suppose to be coolant in the crank when spinning it?
@highlandcycles Жыл бұрын
No
@richardhartley17052 жыл бұрын
Did the internals of the motor feel gritty and is there a need to flush the bottom end out with anything 👍
@highlandcycles2 жыл бұрын
No they don’t. They feel great so we are going to run it
@ericrogner24619 күн бұрын
Hey bro help me find a new stock yamaha cylinder head for 2003 yz125 please has 5 speed trans God bless..
@dillonsmith8707 Жыл бұрын
How much do you save sending it out too have done for you? Rather then having them just do everything from square one
@highlandcycles Жыл бұрын
What do you mean by do everything. They don’t build motors. Just replate cylinders
@MrFPSWisconsin2 жыл бұрын
Looks like it got hot and ran hard or leaned out
@sethmacgillivary128111 ай бұрын
How many hours do those cranks last with proper maintenance?
@highlandcycles11 ай бұрын
Depending on how hard the person rides between 150-250 hrs
@sethmacgillivary128111 ай бұрын
@@highlandcycles oh ok 👍
@cotyshotyou Жыл бұрын
I Don't see the kids' KZbin channel link in the description!
@highlandcycles Жыл бұрын
He doesn't have one
@cotyshotyou Жыл бұрын
@@highlandcycles he said in the video he did and you said it would be in the description lol
@cliffanderson75442 жыл бұрын
It’s kinda of a shity design the air box on the re style kit. Just zip ties to hold filter cage on the box.
@highlandcycles2 жыл бұрын
Yeah
@ShaneAllen5172 жыл бұрын
Do you not like wiseco pistons?
@highlandcycles2 жыл бұрын
No I don’t.
@ShaneAllen5172 жыл бұрын
@@highlandcycles why don't you?
@highlandcycles2 жыл бұрын
@@ShaneAllen517 they have a reputation for growing too much when hot and seizing. I’ve seen it. They have the nick name seize-co
@ianh30072 жыл бұрын
KZbin channels getting big enough you have bot commenters now!
@highlandcycles2 жыл бұрын
I know. So annoying
@ianh30072 жыл бұрын
@@highlandcycles take as a compliment! Great things ahead man
@jangoreo2 жыл бұрын
So were rolling the dice on the crank ? Also, clearly someone has already done the quickie top end and stuff it in your ass job. The CYLINDER wore that new piston in and done.
@highlandcycles2 жыл бұрын
Yeah, going to roll the dice on the crank because he will be riding his 100 in races for the rest of the year and can ride the 125 a bunch before it matters and figure out if it’s ok.