Why I stopped using Glass Rods for Chatterbaits

[@HellaBass]

*Watch this Next to Learn about Best Chatterbait Trailers → **kzbin.info/www/bejne/iWa7iI2bfcqfbbs*

[@tackleandtacos]

I love glass rods for chatterbaits. Caught a lot of fish on them that I am pretty sure I woulda lost on a more traditional graphite or composite rod. Brett Hite uses a glass rod. My fave is a 7-4 St Croix Heavy. Its awesome. But obviously, so much of this whole fishing thing is feel. Like, if you feel better with a non glass rod, cool, have it at!

[@HellaBass]

Brett who???? lol It’s all about the feel, and each angler will have their own preferences.

[@roberts.2413]

Great job on your video and thanks for reaching out to me on Facebook and answering my question .

[@HellaBass]

Happy to help, my man. 😊 Just dropped a new Dobyns video last week as well - kzbin.info/www/bejne/i4iqf5yEiryNgZo

[@Whitehalo117]

My favorite trailer is the Big Bit Baits Kamikaze Swim. Thing give insane action

[@HellaBass]

It's a good one, caught plenty of bass with Swim On

[@matthewotis3594]

I still always fall back on the fluke. Tried them all. The zako is good but get bit more with a fluke on. And the slx xt is an excellent reel. My only slow reel.6.3 to 1. For deep cranking.

[@HellaBass]

@@matthewotis3594 I agree that I think the Zako is good Bair but a bit over hyped

[@mountainhomestreetrods3831]

What would your thoughts be on a Kd743c for a chatterbait rod? I have that rod as well as fury and colt 734c's. Do you think it would be worth it for me to go ahead and jump up to the sierra or would I ever truly notice a difference between what I already have? Thank you

[@HellaBass]

I think any of them can be solid chatterbait rods and definitely comes down to your personal preferences and mechanics, no need to go get a Sierra 734 if you already have two other 734s

[@mountainhomestreetrods3831]

@@HellaBass Thank you so much for the reply. I have really started to buy up more and more Dobyns rods. I am really enjoying them. Thank you for the time you put into your videos. A lot of your recommendations are why I've started running Dobyns.

[@HellaBass]

@@mountainhomestreetrods3831 happy to help, thnx for the feedback

[@floydmayes4924]

I have an older Gary Loomis composite crankbait rod. Has a moderate fast action and think it would be a great chatterbait rod!

[@HellaBass]

definitely worth a shot to see if it works for you

[@trextrextrex]

Agree on type of rod. I like the 735cb Kaden as well

[@HellaBass]

Enjoying the KD735cb for DT10s and 2.5s

[@jacklieu28]

Happy New Year Mr. HellaBass, I have the Dobyns 733c and 734c in both Savvy and Fury line up, do I need the Sierra 734C for 2025 :)

[@HellaBass]

Sierra 734c is only a smidge different than Fury 734, I would not sweat it unless you just want another great multi tool bait rod in your arsenal

[@jasonleet1288]

Champ XP 734 is my go to chatterbait rod. I like that it’s slightly faster than the Sierra, yet still slow enough to keep fish pinned well. Using Lews tournament pro 6.8:1 with 16# sunline sniper. Deadly combo for like 75% of my fishing.

[@HellaBass]

I agree, that is a good option as well. Plus that XP734 can do a lot of other things like jigs and r-rigs well

[@gregc2621]

Graphite rod for chatter in grass. 100%

[@HellaBass]

Same for me, which is your rod of choice?

[@gregc2621]

@HellaBass believe it or not I use a dobyns fury mh/f 7 ft. I fish the potomac so chatter is a must. If real thick I'll use 7 ft H/F fury Used to use a lews custom speed stick, but I noticed over last couple seasons it was a tad stiff (lews seem to be stiff/crisp) and I was in fact losing fish. Overall, rod action/power for any given technique really comes down to personal preference and personal style, in my opinion. For example, I use a more moderate rod than most for a spinnerbait. People think im crazy but my hookup ratio is off the charts.

[@HellaBass]

@@gregc2621 Very nice, good combo

[@vichaimoua]

My chatterbait setup is 2nd gen champion 703c/Tatula sv 7:1:1 12lb line usually only throw 3/8oz. I do plan to upgrade might have to give the sa734c a try.

[@DaveDangles]

I see you like to live dangerously with 12lb ;)

[@HellaBass]

3 power seems about right on the non Sierra lineups for chatters

[@-MAX813-]

A composite with rod braided line gives me the best of both worlds.

[@HellaBass]

That is another popular option, finding what works best for you is all that matters

[@vjennings51]

you prefer the fury 733c over 734c for chatterbait?

[@HellaBass]

In the Fury line yes, but both can be good, kind of depends on angler preference, setup and mechanics. I think the Sierra 734c is the sweet spot!

[@michaelloucks4448]

Hey hella bass thanks for the great video and the tips for a alternative rod . Because my budget is the fury series. But I think with my jig rod I should spend a little more like the sierra series. I. Have a question ❓ for you I am six feet 1 inch tall and I'm almost 300 pounds. What length flipping stick would you recommend for a guy My size . Tell me your thoughts. .

[@HellaBass]

I would say more based on height, but 7'3" to 7'6" for flipping rods. Jig rod Kaden would be a good option as well.

[@michaelloucks4448]

@@HellaBass thanks Alot bud I think the 7' 3" is going to be good for dock fishing because here in Missouri ( Ozarks) we have Alot of docks. Now the reason why I say 7'3" for dock fishing is because one time I was out with a fishing guide and we were fishing near the docks. And my 7'6" rod was to cumbersome. Of course we were to close to the docks. Then again in your video you look like you were staying far enough away but you were getting your lures to the dock no problem. I'll get both rods and see which one I'm comfortable with I know for docks it's going to be the 7'3" hey thanks for the great advice I'll subscribe to your channel I hope you have a great fishing season this year and God bless you and your family your pal fisherman Mike from Missouri.

[@HellaBass]

@@michaelloucks4448 I will fish docks with 7'3" but my go to dock rod is a 7'0"

[@michaelloucks4448]

@@HellaBass I'll have a 7 footer two because I think I'm the past with certain techniques I've been using to long of a rod .

[@Huxxadoodle]

Lol when you said you don’t need to spend over $250 for a rod for the Champion 736cb glass. I just picked up that rod for $170 😂

[@HellaBass]

Never hurts to score a sweet deal!!! 🤘

[@raymondjohnson6496]

What about the Dobyns Champion extreme HP what rod be good to use for a chatter bait

[@HellaBass]

Being honest, I wouldn't. Don't think there is any need for more than a Sierra or XP for moving baits. But if I had to, 743c or 703c

[@raymondjohnson6496]

Why is the DX series is not good for crank baits just wondering I like that model

[@HellaBass]

Not saying a DX cannot be a good crankbait rod just saying that I typically value the price and sensitivity of a DX for bottom contact and finesse baits. There are other rods that have tapers and actions designed for moving baits in the more affordable series. But those same 3 power rods in DX can be used for cranks

[@steve4321able]

You nailed it. I still prefer the Champions though.

[@HellaBass]

Hard no to love the XPs, got several

[@dogvsraptor1980]

Love the Sierra 734, such a great rod that can do so much. Its one of my go to river rods for the kayak: spinnerbait, chatter, small swimbaits, can throw a finesse jig alright or t exas rig. 17lb flouro on a Curado K, gets the job done.

[@HellaBass]

Couldn't agree more! Very underrated rod

[@thedadbodangler7784]

What's funny is this was the exact question I was going to ask you in a live stream. 😂

[@HellaBass]

I have been working on my mind reading ;)

[@Texasbroski512]

I have a champion 733xp split grip and I love it and the way you described the tip I’ll take it as it’s similar to my rod

[@HellaBass]

Yea that rod is a great option as well

[@scottvermonter920]

Awesome info Hella really love the channel Sir!

[@HellaBass]

Glad you enjoy it! More to come!

[@jessieosborne3576]

It’s the 735 glass is the best chatterbait rod lol. No grass in KY lake.

[@HellaBass]

Best for you, not for me ;)

[@Roboworm99]

Do you like that same rod for lipless?

[@HellaBass]

I have dabbled with it as an extra lipless rod when I need multiple, but I typically use my KD735CB or XP765CB for lipless, but it will work in a pinch

[@trust_theprocesscutsfishin3633]

(Sierra series) 704C with Lew’s Team Lite 6.8.1 with 17 pound flo - my go to

[@HellaBass]

Very similar to my setup, just prefer the extra 3" (TWSS)

[@dogvsraptor1980]

Also, I totally wrecked an XT, but I was using it as a frog reel just for a test. I can’t take credit for it though: Debo called that one, need the aluminum frame. I won’t make that mistake again.

[@HellaBass]

My initial SLX needed a repair after a few months of dock fishing with jig, but I have been very happy with SLX XT, feel like there is a lot more to it for the extra $30

[@dogvsraptor1980]

@@HellaBass I agree, great reel for the money. Frogs and braid might not be the best use though.

[@HellaBass]

@@dogvsraptor1980 yeah, although my SLX XT has held up great flipping a 3/4oz BassTEK jig on 20lb fluoro last year

[@FishinwithGRAMPS]

Loving my sweet Dobyns 736CB Glass with a 6.3 gear ratio, let's me rip that hammer out of the grass with a slight pause, giving the bass an extra split second before it pulls away. Like Hellabass said, find what works best for you! Different strokes for different folks.

[@HellaBass]

Right on!

[@brodymiller1524]

Awesome video! Would this rod have a good enough backbone to skip docks as well?

[@HellaBass]

I do use this rod to skip chatterbaits around docks but I prefer a 5 power Dobyns for jigs

[@John_D2]

Rich , are those Kadens sensitive enough for a worm/jig rod ? Thanks

[@HellaBass]

Absolutely, they have a great crisp and sensitive action.

[@John_D2]

@@HellaBass Thanks , brother.

[@gregabramowitz1172]

More great tips! i Love my sa734c for Chatterbaits!!!

[@HellaBass]

Super underrated rod

[@gregabramowitz1172]

@@HellaBass I would agree

[@jimbonczek7813]

I like my Fury 703c. What are you thoughts on the Fury 703c?

[@HellaBass]

Good rod, I have one I use for Topwaters and spinnerbaits, good all around rod, can do a lot of things with that rod

[@bigrywhat]

I’ve been fishing the chatterbait on my 705 Sierra up until recently. Picked up the 734 on sale and with a coupon. $110 couldn’t pass it up and it’s perfect for chatterbait.

[@HellaBass]

Awesome deal my man

[@Justin-tp3lr]

What 5 rods in the xp line would you recommend? I don't do any punching. So i dont need anything really heavy. Which rod would you recommend for chatterbait in that line? My budget is around $2000

[@HellaBass]

Definitely tune in for the live stream tonight, going to have Gary Dobyns himself on at 8pm My Top 5 Rods in XP: 734c - Chatterbait / spinnerbaits / swim jigs / t-rigs 735c - jigs & frogs 733c - Tubes / finesse jigs / senkos 702sf - neds & dropshot 703sf - Shakey heads / wacky worms

[@hunterbull7804]

I run a P5 Madbull with a Bantam MGL 6.2:1. Spooled with 15 or 16lb fluorocarbon. Yes I know it’s crazy expensive but I had to have a Carbon grip destroyer. I use it for pretty much all moving baits 1/2 oz and up though

[@HellaBass]

Sounds like you chose to TREAT YO SELF!

[@NorthWoodsWes]

Cool vid. I like that combo for Chatters. What would you say is a good budget topwater rod?!

[@HellaBass]

What $$ is budget to you?

[@NorthWoodsWes]

@@HellaBass Let's say $100-150! Range

[@HellaBass]

My main topwater rods for poppers and walking baits is Fury 703c, run 30-40lb braid to a short heavy mono leader bit.ly/FuryCast

[@dong8307]

Great info. I have the Dobyns 735 glass and really like it. At times I wish I had the 736 glass for a little firmer tip section. The rod keeps them buttoned up and allows time for them to get it.

[@HellaBass]

Right on, personal preference, lot of anglers love those two rods

[@tommiks5649]

I need to add a couple of rods this year and I think they will be replaced with Dobyns rods.

[@HellaBass]

I don't think you will be pissed if you give them a try Tom!

[@rousefire]

I use a 7 foot mh inshore rod .

[@zippyduck1]

Gary is going to be so mad at you for using the word " parabolic ". The Sierra 734c is my spinnerbait and chatterbait rod. Also and excellent weightless senko rod.

[@HellaBass]

Zippy, 100%, I like that you can still use the 734 for other stuff, not just moving baits

[@zippyduck1]

@@HellaBass That is why I own several of the Sierra and a Champion 734c

[@nickpr5964]

Def everyone's preference. I have had the 735cb now for a few seasons and til this day I have only lost one fish on it and I blame my reel speed on that one because the fish swam right at me and came off. I do agree with you about the sensitivity being better especially around grass with graphite, but I feel like I give that up to have the advantage once the fish is on. I personally love the 735CB.

[@HellaBass]

Along as it works for you, keep crushing them!

[@JB3_fishing]

This was a great video! I use the Lew’s 7’3mh Andy Montgomery signature series chatter bait rod paired with a Lew’s Pro Ti. I’m currently experimenting with lines but current have 15lb floro. I’m thinking about changing to 18lb sniper. I’m not sure yet.

[@HellaBass]

Very cool!

[@BrianKuhl]

If I’m limited to a MH Fast action rod for the coming season, but still want to try a chatterbait, I gather you’d highly recommend mono? Any other tips that might help? I presume backing off the drag will save fish from having lips ripped out, but I’m guessing I should just expect to miss more bites because my rod won’t load up… am I better off just shelving it for the time being so I don’t develop habits I’ll have to unlearn when I do get better suited equipment?

[@HellaBass]

Brian so hard to say, MH Fast varies from model to model and manufacturer to manufacturer. I say, just try it with 17lb fluoro or mono, if you are getting bites, hooking up and landing them, then you are good. If you feel like you are missing too many bites or bass are coming unbuttoned, then adjust from there

[@BrianKuhl]

I figured as much RE: rod. I already had a reel spooled up with mono to learn how to cast a baitcaster last season, so I’ll probably give it a try at some point when the going is tough and I’m looking for a bite. Nothing ventured, nothing gained… maybe 😂.

[@morganvanschuyver]

I use a Lew's tp1x bladed jig rod. It's a 6'11 medium moderate rod. My reel is a lfs speed spool 6:8:1. The rod is perfect loads really nice have yet to lose a fish. (Knock on wood). Best part is the rod is only $80. It's graphite to. Btw

[@HellaBass]

Sounds like a bargain of a rod!

[@morganvanschuyver]

@@HellaBass if a person is looking for a budget friendly bladed jig rod it's definitely well worth the money.

[@toddlester8063]

Hah - yup, that's the rod I use too. It's a damn versatile rod too, use it for TONS of stuff. Chatterbaits, spinnerbaits, medium texas rigs and jigs - heck, I even threw medium cranks on it for a little bit and it did just fine.

[@HellaBass]

Couldn't agree more!

[@vichaimoua]

Sadly Omnia doesn’t carry any Sierra casting/spinning rods 😭

[@HellaBass]

Hope to fix that some day, but you should send them an email and let them know you would want them, maybe that will help them get them in or maybe they can special order you one

[@pj3p488]

Sierra 734 is such a great rod for the JackHammer and for spinnerbaits. Easily the best of the Sierra line.

[@HellaBass]

Super underrated, doesn't get enough love TBH

[@anthonyreeder8283]

Awesome video Hella I want to get that rod for my moving baits. I have a fury 734c I’m using for right now I want to get something like the Colt 734c or the Daiwa Arid X 7’3 MH is a even cheaper rod and it has a parabolic action.

[@HellaBass]

Go for it! All good options!

[@Fisherman613]

735Glass 736Glass and 765Glass is the ticket

[@HellaBass]

Not for me, but many love them

[@dariusking2927]

I hate any Glass rod 😂😂

[@HellaBass]

Same here bud

[@billcoerver4583]

Great content! Personally I use the KD 713C paired with a Daiwa Tatula 100 with 20# Seaguar Invizx... Awesome set up

[@HellaBass]

Good choice! Have not fished that rod, but I bet it SLAPS!

[@Daniel_Tucker]

🤙🏻

[@backlashpro830]

Can not wait for that bite to start! My favorite way to catch big pre spawn largies.

[@HellaBass]

AMEN!