Why make THIS? Aufero Laser 2 Engraver and Cutter Review

[@artbenson3366]

For the Aufero 2 you can build a macro and use settings in Lightburn to basically simulate your limit switches.

[@nicholasjdiaz83]

I was able to add limit switches to my AL2 quite easily since it has the same motherboard as AL1.

[@garrettc.9451]

Where did you purchase your limit switches? I would love to do the same.

[@CorneliusCreations]

My new favorite channel!!!

[@MrJimpurvis]

I got this a couple of days ago loving it so far!

[@makeorbreakshop]

Oh awesome, good to know!

[@alexanderlopez3666]

Hi sir im from philippines,i would like to ask? What version of Aufero 2 is the best in cutting wood and acrylic materials??please advice...TIA😄😄

[@tanyaisis]

I want to cut out svg file for miniature house on mat board and thin wood will it work for me

[@mariajohnston2147]

I'm excited I was able to pick one up on Ali Express for $145.00 12/22 I can't wait.

[@paullobwein1632]

Completely new to laser and cnc type machines. I am keen to know if this machine will cut Alluminium at a minimum of 1.2mm ? I have been waiting to hear from the company but nothing from them.

[@pollyrobinson3877]

As always, excellent, thorough review.

[@Kopsu87]

Great review again! You're the gold standard when it comes to laser reviews on youtube. I've been on the market for a laser for quite a while now and can't seem to make up my mind, so I really appreciate these vids. I know I want a dual diode laser. My 1st choice right now is atomstack x7 as they now are promising air assist to be released for it soon. Neje was on my radar, but their setup seems very "janky" and I've heard they're overdriving their diodes way too high = shorter lifespan.

[@makeorbreakshop]

Atomstack is great especially if you want the higher wattage!

[@henryaustin2072]

@@makeorbreakshop wainlxu，did you try？

[@woodsniffer]

Great video thanks, I have the lu2-2 and can only engrave works good But now I want to cut. Ortur wants me to upgrade to the pro. But Im limited on dollars. do I get the SF or LF ?

[@AmosJVM410H]

Looking for advice on engraving aluminum. Just etch it. What. The best one for budget? Thanks

[@Mr61tanker]

maybe you can help me the four screws that hold my gantry to the frame is loose, I tighen the screws but there is a lot of play I have tried everything that I know any tips?

[@teocan7438]

Hi! Am I able tu use this using .dwg files in AutoCAD ? Or just using the software AutoCAD to draw what I want and then open it in another software to laser cut it ? Thank you in advance

[@makeorbreakshop]

You would need to export your drawing from Autocad, Lightburn can bring in a ton of different file formats that would then run to the laser.

[@teocan7438]

@@makeorbreakshop Ok thank you !

[@chrislx2006]

Export as a DXF file, will import straight in retaining layers

[@teocan7438]

@@chrislx2006 Thanks !

[@jeremywesson8626]

@@teocan7438 if you get crazy lines or else on your burn, change the Dxf version , the best is to match the year the lasersoftware was built, if it was 2018 just export the object to Dxf version 2018 or earlier.

[@shahinaali192]

Hi. Do we have any concern with ventilation while using aufero 2?

[@thecraftguy21]

Could you recommend a cuttingachine that can help me cut cardstone for invitacion making ? THANK YOU 🙏🏻

[@baronleathercraft]

Great video! what are the dimensions of the honeycomb panel needed for the Aufero 2? Thank you!

[@cjflores5196]

Hey man video was great. Curious I see everyone doing wood, wonder if it’s possible to do cups/metal etc.

[@adrian4jc]

Can this cut 5mm acrylic? Would you please recommend the best one for that?

[@RyanGriffin74]

I found this review super helpful, and has convinced me this machine would be a good addition. With this laser option they sent, and applying the code, it's 369 before shipping. Is there a way to get one of the 100*100cm cheapo Ebay engravers to work? I really need a much larger working space for engraving, but the few comments I've found online is that no one can actually get them to work.

[@Framidan]

I’m needing to make some cardboard boxes, for the stuff I’m making and selling on Etsy.. It will be a good option to make it them with a laser cuter like this one, or the Laser Master 2?

[@makeorbreakshop]

Both have the same laser modules so either would be great!

[@TheFlamingEyeball]

Do you know if this can be used with the cup attachment for engraving cups and tumblers?

[@hspeed3656]

Great review. Have you tested the FoxAlien Reizer Mega Desktop CNC Engraver Class 4 20W Fixed-Focus Power Module and Adjustable Z-axis, 400x400mm CNC Engraving Machine

[@djr3008]

I am looking for a Lazar that will allow for my own drawing and cuttings that I can upload to the laser. But affordable. I know many of the CO2 lasers have this capability. A CO2 laser is a bit much on my budget right now. Any help would be greatly appreciated.

[@ABWOrturLaser]

Did you need to activate or otherwise with the firmware…or is a case of fit the end stops and plug them into existing pins/sockets on the board?

[@alexherrera3918]

Nice review. Do you have any opinion of the congo z1 it cam with switches and with10W laser , it is also about $10 cheaper than this one. I hope you can comment, Thanks

[@sciencechristine9673]

Great review. How does it compare to SCULPFUN S9? It is said that the S9 has stronger penetration to cut thicker wood or acrylic? want to see

[@makeorbreakshop]

S9 coming soon!

[@melindagibson8606]

I would love to see this as well! I also wonder if I can add the S9 head to the Foxalien Mega base? I like that Sculpfun has an expansion kit, but it is very expensive for a couple rails and belts. I like the Foxalien Reizer base but I would love to see this as well! I also wonder if I can add the S9 head to the Foxalien Mega base? I like that Scupfun has an expansion kit, but it is very expensive for a couple rails and belts. I like the Foxalien Reizer base but not the laser! Also if the rotary is interchangeable.

[@melindagibson8606]

@@makeorbreakshop could we get a preview idea if you like it? Lol

[@qarasaaraq1]

What is your opinion with the mr carve M1 fiber laser?

[@HappyHealthyandFree]

Does this work well and give good depth on hard woods as well?

[@miketorgerson3536]

I bought this laser, this is my fist time using a tool like this. I am struggling with the tracking of the gantry. It wants to rack on the y axis travel, causing alignment problems. I know this is a cheap entry level unit, just wondering if there is a fix for this. I have been adjusting the guide rollers and drive belts with limited success. Just wondering if you have thought of doing a video on the set up and tuning of similar style machines. Thanks for all your content.

[@Animalwon]

I appreciate you showing a Laser DOT SIZE comparison! You show the Atomstack X7 but isn't the A10 Pro using the same laser module? I ask because I am interested in the Wifi capability of the X7 but no one has proven it works - and the A10 is more affordable for me if i can't control machine from WiFi.

[@nathanieltagles9245]

Can I engrave stainless steel with this if I get the rotary attachment for things like yeti cups?

[@Abigail-ie8nh]

Stainless steel can be engraved, if you want to engrave cylindrical items, you need to use our YRR accessories to engrave.

[@c2225]

Could you please test the size of the dot of LU2-2 and LU2-4 LF?

[@Abigail-ie8nh]

The focal spot of LU2-2 is 0.07x0.06 ，and the LU2-4LF is 0.17x0.25.

[@anthonyrawrapdesigns4550]

Still no comment on the J Tech 7 watt?

[@prestongriffin416]

can you add limit switches on the laser?

[@Rodamyot]

kzbin.info/www/bejne/fKuopmN_lJ5_qMk

[@mnmC001I0]

Awesome video! Thanks so much for uploading! I have never ventured in to this world and wondered if you thought you could laser engrave wooden golf tee pegs with this? Any help greatly appreciated!!

[@Velereonics]

Yes, but you would really want to dial in the focus to get thin lines.

[@HunterLikesCameras]

So the xtool d1 now has light burn comparability, and the atom stack looks like it’s coming out with an air assist later this month. I think these updates fixed the biggest problem with each machine. But now I’m super torn between the two. Id really enjoy hearing your thoughts??

[@makeorbreakshop]

Overall the D1 is a nicer build, but usually Atomstack is a little cheaper. Also currently D1 doesn’t have any air assist option.

[@cynthiasparks7545]

@@makeorbreakshop have you seen that they have the D1 has air assist option now? With that being said, would you choose the crook D1 over atomstack7?

[@grandmab9304]

Great video

[@benjaminbrewer2154]

The aufero 2 link is a white page (body) with navigation links. Don't think that works well for affiliates.

[@thecraftguy21]

HELP 😭 I'm looking for a budget friendly laser cutter that can help me cut cardstock for invitations and maybe basswood or plywood. Thank you 🥰

[@FutureLaugh]

can this engrave stamps?

[@Abigail-ie8nh]

Yes，it can engrave on the paper.

[@FutureLaugh]

@@Abigail-ie8nh No not paper, will it create rubber stamps by using the lazer to engrave the design?

[@Abigail-ie8nh]

@@FutureLaugh Yes，it can.

[@thecraftguy21]

@@Abigail-ie8nh can I cut paper ? To make invitations?

[@Abigail-ie8nh]

@@thecraftguy21 Yes,ITcan

[@chontewilliams]

Hey if you want to donate any of your older machines to someone please pick me ! Lol