What's the deal with plastic - when you want it to last forever, it decomposes in a few years; when you want it to decompose, it lasts forever! Plastic can't make up it's mind what it wants to be! Soft or hard, flexible or brittle, smooth or sticky - come on plastic, settle down and pick something!
@spectorcreative18723 жыл бұрын
It is meant to be played with, it does not preserve
@victordemonte500 Жыл бұрын
Jerry Seinfeld over here haha!
@martinfiedler43173 жыл бұрын
And again a worthwhile 8 minutes spent on my favorite chemistry channel: "Spector Creative, Scientoyst"
@spectorcreative18723 жыл бұрын
Ooh I like that title!
@fysiognomi Жыл бұрын
Is the "sticky substance" toxic? Does it penetrate the skin? I know that some plastic materials can affect human hormones etc. and I am somewhat concerned about this
@dlpi92123 жыл бұрын
Thanks Scott! Your channel has become an almost daily watch for me while I work remotely. Not only do I enjoy your insight and your willingness to share from your years of experience, but I really appreciate how responsive you are to questions. There are a lot of other folks out there who seem to want to 'protect' their knowledge as if it were some trade secret. I think the only thing left I need to figure out is how best to take care of that pleathery material and keep it from flaking/breaking apart. Thanks again!
@spectorcreative18723 жыл бұрын
And so much of the toy industry is public knowledge, I won't ever give away corporate secrets. Glad to have you watching!!!
@artkingofwholefoods742 жыл бұрын
JESUS CHRIST. Scott you know EVERYTHING about toys… This was the BIGGEST mystery to me as a child… you must be the BEST Dad!
@InterstellarModeler Жыл бұрын
Should you wash a sticky the figure before applying the sealer? Thanks for this video
@ryanspengler48773 жыл бұрын
The timing on this couldn't be better. I just pulled a tote of TMNT stuff from the garage to clean up for my kid after she got the retro Turtle Van and so many of them had become sticky in storage. Cheers!
@spectorcreative18723 жыл бұрын
Cheers right back.
@DamageCity5 ай бұрын
I just bought an on card Captain Power Corporal Chase figure and when I opened it, her head and lower legs were sticky. Very helpful video!
@brushstroke37333 жыл бұрын
Plasticizers in the vinyl in your car are also volatile and after many years, the vinyl can become hard and brittle. Also, the plasticizers slowly coat the inside of your winshield as they leave the vinyl, which is part of the reason cars build up a residue on the inside of windows that has to be cleaned occasionally. Chemistry is fun!
@spectorcreative18723 жыл бұрын
Good point!
@JCetto.26123 жыл бұрын
Yes! I knew it... Thanks for adding the technical terms, Scott! It's basically a "dehydration" of the plastic..
@spectorcreative18723 жыл бұрын
A good way of putting it
@spaceknight7933 жыл бұрын
What I use for smaller toys (from 12" Marx figures down to 3.75" Star Wars figures is a brush-on varnish from "THE ARMY PAINTER WARPAINTS." They offer both a "gloss" and "anti-shine matt" version (in small 18ml size and a large can size for dipping). I use the "anti-shine" almost all the time. It completely covers the sticky area and dries in minutes. I have salvaged many a vintage figure this way, and as far as I can tell is completely unnoticeable to my eye and touch. I also had to use this on a 20 year old all-white 8" Gandalf figure I pulled mint from a sealed box (bought it for my son). Whole thing was sticky everywhere. I first washed the figure in soapy water, rinsed it, let it dry, then covered the entire toy in this varnish. Felt and looked like it was brand new. So that's my experience with this varnish.
@spectorcreative18723 жыл бұрын
I"ll have to try that!
@dantealexander98632 жыл бұрын
Any updates on the figures? Are they still good? I'm trying to see what could help me protect my vintage Pokemon figures, I want them to preserve the paint.
@UncleAwesome Жыл бұрын
@@dantealexander9863 how cool would it be if people actually replied back to follow up.
@TitularHeroine3 жыл бұрын
Nice. Nice. I am *sure* this'll happen someday -- Friend (investigating ruckus, finding figure repair abattoir): ".....what *are* you doing?!?!" Me (applying sealant whilst cursing the inevitable creep of entropy, crazed glint in eye): "Science!!!"
@spectorcreative18723 жыл бұрын
All hail science
@Beedo_Sookcool3 жыл бұрын
Thank you for this! I've got a 2010 Wal-Mart Jabba who's got a date with a hot soapy bath and some clear sealant. And, no, there is no way I could've rephrased that so that it didn't sound filthy.
@spectorcreative18723 жыл бұрын
No I don't think you could
@ZeroAnalogy3 жыл бұрын
How about "... has a scheduled appointment at the toy spa for..." It lacks the innuendo and is so verbose. If Jabba was accompanied by another action figure, then the "date" phrasing would be funnier / more funny.
@liohobo3 жыл бұрын
great figure
@pandamant6662 жыл бұрын
Thanks for the vid, I have some old figures from Japan about 15yrs ago, and they started to getting sticky, and they are very limited and hard to buy nowadays, and the few of them selling online are super expensive now. Your vid helps me to get my figures back to fresh
@spectorcreative18722 жыл бұрын
I am so glad to hear! Any help sharing and reposting is most appreciated
@dantealexander98632 жыл бұрын
I have the same issue with a few of my Pokemon figures, they are called zukan, hard to come by, and I love them and want to keep em looking good.
@artkingofwholefoods742 жыл бұрын
Dude…. This was AMAZING. Your slowly winning me over as my “Favorite”. Damn. I ALWAYS learn SO MUCH. Hasbro NEEDS to call you.
@spectorcreative18722 жыл бұрын
Well thank you! Any help reposting videos is most appreciated!
@LordBadenRulez3 жыл бұрын
For those sticky hand toys, wash them with dishwashing liquid and let them dry. It will be sticky and good as new. For sticky toys, I found that ammonia-based cleaners (not sure what American brands are available), used in kitchens, works excellent. They are slightly abrasive but not enough to damage the paint or decals. Use a toothbrush and rub in small circles. Of course, test on a small piece of the toy first.
@spectorcreative18723 жыл бұрын
Nice! It looks like many ways to do this
@SausageVillan3 жыл бұрын
In your experience does the sealing compound come off at the areas of friction like joints?
@spectorcreative18723 жыл бұрын
Yes it can if played with. Not if just displayed
@machineman64983 жыл бұрын
Great Video. I think a lot of it has to do with the quality of plastics used. Got a few Adventure People and they are still clean. Got a few current Neca that needed to be cleaned as soon as they were opened. Do the sealed figures still have good paint? I’d wonder if the gasses or plasticizer is trapped on the same side as the paint. And don’t use enamel model paint on your figures. It doesn’t dry on vinyl.
@spectorcreative18723 жыл бұрын
Yes, but you should prob not play with them
@brushstroke37333 жыл бұрын
Watch out for old rubber "feet" on the bottoms of stereo equipment, music keyboards, etc. I once set an old keyboard down on my carpet, unaware that the rubber feet had decomposed and turned into a thick black goo that was very difficult to remove (and will never be removed entirely until the carpet is removed.)
@spectorcreative18723 жыл бұрын
Ah yes!
@ZeroAnalogy3 жыл бұрын
A related issue. Have you observed 2 different toys from different companies stored in close proximity (one on top of the other) degrading at the same with the chemical by-products reacted resulting in fusing of parts or melting/deformation? I'm guessing proactive preparation rather than clean up and restoration is the simple answer to avoid, like keeping brands/lines separate during storage.
@spectorcreative18723 жыл бұрын
I suppose I have not tried this or looked at this intentionally but I have many bins of older toys and will see what I can find
@machineman64983 жыл бұрын
Yup. The softer vinyl leaches out and melts ABS. Store them separately or put a small piece of plastic wrap in between for things like a hat on display. We had a Buzz Lightyear that would make a cracking sound at each play session. Even new, the figures vinyl arms were melting with his ABS torso.
@CaptainStarlight3 жыл бұрын
@@machineman6498 I would not recommend plastic wrap. This also reacts with some paints (like MOTUC King Grayskull's chest emblem). Rather use polypropylene comic bags. They're non-reactive and not only good for archiving comics!
@machineman64983 жыл бұрын
@@CaptainStarlight OH! That would explain why some eBay sellers ship figures in them.
@CaptainStarlight3 жыл бұрын
@@machineman6498 Yup! I've started storing all my figures this way. 😁
@lighthope69853 жыл бұрын
I have noticed that it happens mostly to clear/translucent figures, especially if the plastic is more rubbery plastic
@spectorcreative18723 жыл бұрын
Very much so
@reload543 жыл бұрын
I had a Saitek flight stick I put up in closet and it sat their for 20 years, I pulled it out to play in a new flight sim as the x52 hasn't changed much and my hands were completely covered in gue. I tried to wipe it off and the top layer just came off as I wiped like it was melting. Similar to an old steering wheel in a car.
@spectorcreative18723 жыл бұрын
Very similar
@MrJtmendoza1803 жыл бұрын
John Cleese was a perfect casting choice as Q in the James Bond films. He was awesome! My DC Direct figures that are loose became sticky over time. I never played with them, they are just on display on my shelf. Ugh.
@spectorcreative18723 жыл бұрын
He always is
@tawdryhepburn46863 жыл бұрын
I like your Shtick in this video. One of your better efforts. And legit educational to boot!
@spectorcreative18723 жыл бұрын
Always working on my shtick
@tawdryhepburn46863 жыл бұрын
@@spectorcreative1872 I Think I saw my older brother doing that in the shower, once.
@MrHemanclix3 жыл бұрын
baby wipes FTW I gave all my 1980's He-Man toys (vehicles, beasts everything) to my Son. I've also bought him all the new ones in Origins. nevermind all the new articulation and brighter colors, when asked about the differences between the old and new ones he likes to tease me recalling their condition when they were brought out of storage, and he saw them for the first time. "Poppa's toys are sticky." he says. gets my goat every time, cuz I definitely washed them before I gave them to him (one at a time over the course of months). so I tickle him 😁and chase him around until we're both exhausted from laughing and exertion 🤣😂 then we probably play with Legos or slime or something while we catch our breath. LMAO "Poppa's toys are sticky" SMH you're the one who has dragons that come packaged in eggs full of slime 🤪 😂😁
@spectorcreative18723 жыл бұрын
Oh that is a great method
@CaptainStarlight3 жыл бұрын
Scott, I was wondering what sort of ill-effects you've had? You mentioned you messed up a few figures? Any "do nots" to mention with your method?
@spectorcreative18723 жыл бұрын
With the yellowing I have bleached some figures colors out and I’ve just had some figures that needed to be washed a lot with sticky
@CaptainStarlight3 жыл бұрын
@@spectorcreative1872 Ahh okay, so no issues with the spray itself? Doesn't gum up the joints at all?
@garshanarny3 жыл бұрын
I wonder why this never seems to happen to old plastic dishes, like Tupperware. They get routinely washed, so maybe that explains it, but I guess there might be different standards in what chemicals are safe to use in food grade plastics.
@machineman64983 жыл бұрын
Definitely different grades. We got some +30 year old unused and it doesn’t leach. It does have an odor and the lid made of a different color ( so different batch) had shrunk a little.
@spectorcreative18723 жыл бұрын
Oh yes, very different
@Shoulderpads-mcgee Жыл бұрын
Are toys that become sticky and start to degrade toxic and dangerous?
@jamesbounds3 жыл бұрын
That's happened to some of my old figures before. I've just washed them with soap and water like your first suggestion.
@spectorcreative18723 жыл бұрын
Yup. you just need to wash them every few years
@oneeyeddragonstudio Жыл бұрын
thanks for this video, but what about how to prevent/avoid this? im thinking of installing pc fans at the side of my display cabinet to extract air/fumes/circulate air. that's likely to help the plasticiser from settling on the surface right?
@d19xx3 жыл бұрын
Airing the figures on occasions also helps. Keeping them in sealed containers long term seems to cause them to get tacky.
@spectorcreative18723 жыл бұрын
Yes, but Oxygen can also turn toys yellow
@TomatoTomato9112 жыл бұрын
I have small rubber figures exposed to room environment and they not just turned sticky but also caught alot of dust on them. The sticky residue also increases the chance of mold growing...
@soupio77493 жыл бұрын
Excellent video, thank you for all the info and advice! Just wondering if the shower will change flat finishes to gloss?
@brushstroke37333 жыл бұрын
Clear coats come in many finishes. Gloss, semi-gloss, satin, and flat usually. If you use gloss but only spray very lightly, it doesn't add much shine to things. I used a glossy clear coat to seal the Crayola washable paints I used on the miniature instruments I made for my MOTU figures, and found the gloss spray left things looking flat if I only applied a light coat.
@spectorcreative18723 жыл бұрын
No it should not
@JamesSerapio2 жыл бұрын
I had a good portion of a pvc figure collection get ruined by this. The soap and water thing just did not work. Good to know that my current stuff can just be varnished to extend the life.
@aesopfrogox43103 жыл бұрын
Could you make a video showing us how you go about spraying the sealant onto a figure or two? Plus, does the sealant make them glossy? 🐸
@LordBadenRulez3 жыл бұрын
You do get matt sealant. But over time, it could start to chip or bubble and could make things worse.
@aesopfrogox43103 жыл бұрын
I’ve tried acrylic paint medium a few times. Not on an entire figure though.
@spectorcreative18723 жыл бұрын
Just aim and spray. And depending on which you use, yes it can. Try testing it out first on things you don't care about.
@aesopfrogox43103 жыл бұрын
Got it. Thanks. 🐸👍
@Tsarivan7 Жыл бұрын
Thank you, very nice info. I found some of my DCUC and some of MOTUC getting sticky after storing it moc this last few years. Do you have any links for those coatings spray? I know some but it usually comes with gloss or matte finish, so i'm afraid it will change the color of the figures. And does it affect the articulation if i put it in the swivel/joint?
@Belmont_793 жыл бұрын
Thank you very much Scott! 🤘
@spectorcreative18723 жыл бұрын
Thrilled to inform and entertain
@TheCrabbyArchives3 жыл бұрын
I’ve actually had some ben 10 action figures leak plasticizer, but they’re only 10-13 years old at best and were kept under my bed (not an attic or basement so it’s not ungodly hot). What’s up with that?
@spectorcreative18723 жыл бұрын
Hey some plastic goes bad earlier
@kennethmasaya46032 жыл бұрын
Regarding on spraying it with paint. Can we use like top coat like matte or gloss?
@mikewerner37979 ай бұрын
I found that using denatured alcohol works better than soap and water. It did not damage or discolor any of the pieces I cleaned. The water/soap method still left some stickiness on some parts. After using the alcohol there was no stickiness . I used a small brush for rough or textured areas then wiped the alcohol off with a soft cloth. NOTE:YOU MIGHT WANT TO TEST A SMALL Inconspicuous SPOT ON EACH PIECE JUST MAKE SURE IT DOES NOT CAUSE DISCOLORATIONOR DAMAGE.
@GartheKnightReturns2 жыл бұрын
I have one figure that turned tacky to the touch. It’s a Batman Beyond figure from around 1999/2000 and it in a handful of years turned sticky.
@FairladyZ20052 жыл бұрын
Good advice. My LOTR Eowyn figures have had this problem lately. Going to see if a good washing and sealer fixes them.
@reincarnatedPostit2 жыл бұрын
Any luck? I just bought lotr eowyn figure new in box and it's sticky. It looks pretty fragile so I don't want to mess it up
@FairladyZ20052 жыл бұрын
@@reincarnatedPostit Washing helped but it didn't completely solve the problem. I didn't try the sealer, so that might still work. Ended up trading them in at a used toy store to get a Marvel Legend I wanted.
@aprilevans4111 Жыл бұрын
Ive used the windex method a d have had great successes cleaning the toys so far.
@paluxyl.86823 жыл бұрын
I got only 1 figure of over 300 and that is my old He-man (Made in Malysia) , he is now with Skeletor and Stinkor in the box of my 12" Greedo figure . I can see them , but I don't need to touch them .
@spectorcreative18723 жыл бұрын
Best not to
@Phantasia_Workshop3 жыл бұрын
A wise man once said "Nothing lasts forever, even cold November rain".
@louisvictor34733 жыл бұрын
Those usually turn into December cold rain.
@spectorcreative18723 жыл бұрын
I like wise men. Especially wiseguys
@ZeroAnalogy3 жыл бұрын
@@spectorcreative1872 La Cosa Nostra? Baddabing, baddaboom, baddabang.
@spaceknight7933 жыл бұрын
Axl Rose
@kbraven70072 жыл бұрын
I have a ton of Disney Store figures and I was wondering if the leak protector can really work on them? I don't want to damage them because some of them are part of my childhood.
@johnmorey7203 жыл бұрын
Do you know the solution when clear plastic grows cloudy? It doesn't happen over time, but usually after some contact with water - and I can't figure out how to un-cloud it, which is pretty unfortunate.
@spectorcreative18723 жыл бұрын
Do you mean in package? Try using a hair dryer
@thexxwatcherxx3 жыл бұрын
If a figure is cloudy in package put it in the sun for a short period of time. I had a carded POF Death Star Gunner that was cloudy. Left him the sun for 15 to 20 min and it cleaned him right up.
@johnmorey7203 жыл бұрын
@@spectorcreative1872 I mean after contact with water - whether washed off or otherwise. It only shows with some translucent rubber or PVC, but it's very noticeable.
@TheBadger743 жыл бұрын
Have you tried white vinegar?
@emerje03 жыл бұрын
Plasticizer has been part of my vernacular for a long time now. It starts leaking from new toys almost immediately (long before they get sticky) and is what gives that distinct smell to new figures with soft parts like capes. It's also part of the combination of odors that cause the "new car smell". en.wikipedia.org/wiki/New_car_smell
@spectorcreative18723 жыл бұрын
Good to know
@carlospointofview3 жыл бұрын
I had this issue with the DCUC Blue Manta. It was so sticky. I cleaned it with sanitizing wipes and it work perfectly.
@TOONG33K3 жыл бұрын
I was about to mention this exact same figure, the one who is slightly rubbery to the touch. I'll give the wipes a try. Thanks.
@carlospointofview3 жыл бұрын
@@TOONG33K you just gonna have to scrub a little hard and several times to remove all of it.
@spectorcreative18723 жыл бұрын
You may need to clean it ever few years like this
@arapsavage3 жыл бұрын
I just clean them with rubbing alcohol...seems to fix the problem long term.
@robd13293 жыл бұрын
Mm i never had a sticky toy
@spectorcreative18723 жыл бұрын
Great! You may need to do this every few years
@magusreaver3 жыл бұрын
Time for the rubbing alchol bath. OH GOD WHAT HAPPENED TO MY PAINT APS!
@charlesweinert41163 жыл бұрын
I’m not sure this would be very friendly to Battle Beasts.
@brushstroke37333 жыл бұрын
That might extract too much of the plasticizers out and cause the plastic to become brittle long term, but I don't know for sure. How long have you been using that technique?
@albertoortiz35742 жыл бұрын
Nice explanación, at the same time it is sad, but: it is real, Nothing last for ever , they start decaying as soon they are made... like the new car smell,, .... oh yes we remember the smell of new plastic figures at christmas... Thanks!!!! Keep On, On, On....
@spectorcreative18722 жыл бұрын
Yeah I only bring the facts even if they might not be good ones. Glad you enjoyed
@amilan40921 күн бұрын
Hi, since you love toys and seem to know science , could you consider trying to help with an issue I'm having ( as well as other doll collectors) it seems that hard plastic dolls in the 40's were made with a urea formaldehyde plastic added to them, or that is the complete formula , now the dolls are stinking, some people say vinegar, some say sour milk, or awful vomit smell.... I've read that this is from bacteria eating the urea in the plastic ( science wise, is that possible ? ) Are there any bacterial killing cleaners that will actually penetrate into plastic a bit ? I know UV light is often the enemy of toys, but in this case, could it help ? Do these bacteria need oxygen to live and could a sealant to deprive them of oxygen stop further damade ( slow it down greatly even) I've heard some call this "hard plastic disease" or "pedigree doll disease" as they were an english company that may have invented the bad plastic formula. I've even read warnings that it can spread from one doll to another if they are near eachother or sharing clothing .. I've even seen warnings of do not touch another doll after an "infected" doll. Some have speculated that lead eye mechanism parts may be causing the plastic to become unstable. I'm pondering if some safe dolls have wigs glued on with this awful urea formaldehyde ( or there was a bran of glue back then that was made from fish waste ...yuck) I don't know if you'd be able to get to the bottom of this and help the doll community, but if so, it would be greatly appreciated ! and eother way, thanks for consideration !
@ZeroAnalogy3 жыл бұрын
10 Year Old Kid: "I'll put these toys away in the attic." [5 years time passes.] 15 Year Old Teenager: [Yelling from the attic storage] "Mom, my old toys are sticky!" Mother: "I don't want to know! Tell your father!"
@restock_17313 жыл бұрын
🤣🤣🤣
@spectorcreative18723 жыл бұрын
That is the cycle all right
@spectorcreative18723 жыл бұрын
Yeah!
@tawdryhepburn46863 жыл бұрын
What kinda of sicko 10-year-old _decides_ to store something in the attic? Sounds like he’ll “Need to return some video tapes” when he grows up. if you know what I mean.
@ZeroAnalogy3 жыл бұрын
@@tawdryhepburn4686 Video tapes? That's a bit out of date. DVDs would be more appropriate for 2010-2015. If we pushed the time frame to now, then "kids" would not necessarily be using physical media. Your suggested scenario works better around early 2000s. There could be the rare when a youth goes into an early dark age with toys. In the LEGO community, a "dark age" is the time range between when a child stops playing with LEGO bricks and revisits the hobby as an adult.
@brushstroke37333 жыл бұрын
Do you take figures apart before spraying the pieces with clear coat? I would imagine if you spray them intact, they would become locked in whatever position/pose you clear-coat them in.
@spectorcreative18723 жыл бұрын
Personally I do not
@artkingofwholefoods742 жыл бұрын
Maybe using a Dremel high speed polishing bit?
@stuartpattison15764 ай бұрын
It is weird because all my vintage Star wars. He man figures that are 40 year s old are perfect.
@xoxardnekoxo Жыл бұрын
I need to try this! I've got two rare sets of Gashapon figures from Japan, and I just got them a couple of years ago. They were still in their original packaging, and they were 20 years old at that time. So they'd been sealed for 20 years. Tonight I just opened a Bratz sushi lounge that had also been sealed for 20 years (or very close to it), and all these things have that horrible sticky texture. It's so bad I can hardly stand to touch the stuff. I've used Dawn dish soap on the gashapons twice, but the stickiness returns. So I'm going to try the sealing method next. I have Mod Podge that I use for sealing my acrylic paints. Do you think that would work okay? Or I may look into the non-shiny matte sealer someone else talked about, because I don't want my sushi to be shiny lol!
@ryansargent6613 жыл бұрын
Thank you for this, it’s something I’ve wondered about for a while now. Now I know why it happens and some ways to combat it. Thank you!
@spectorcreative18723 жыл бұрын
So glad to inform and entertain!
@rickytoddbotelho95553 жыл бұрын
Excellent video info.😀👍❤💥👞🌴🌴
@spectorcreative18723 жыл бұрын
Always glad to inform and entertain
@aaronmoreno45456 ай бұрын
Thanks!
@demonized3299 Жыл бұрын
While I was moving some figures around I noticed my two Marvel Select Sabretooth figures were super sticky. Just weird this would happen to these two figures and not the other figures stored with them in my display.
@skittlesnacks Жыл бұрын
I recently ran into this. I stored a bunch of Star Wars and GI Joe figures in plastic baggies for over 20 years. I'm pretty sure it was the bags that caused it, since ones not in bags weren't sticky. I used some Windex and they've been fine so far.
@OzzieAstaroth3 жыл бұрын
For some of these, rubbing alcohol works. I've had a few figures that had that rubbery kind of plastic used, and alcohol worked for those. For others, soaking in a solution of water and dish soap, then scrubbing with a cloth worked.
@spectorcreative18723 жыл бұрын
Oh yes, but you may need to reapply every so often
@MonstersOfTheUniverse3 жыл бұрын
What do you suggest for Japanese vinyls like medicom or m- ichigo Godzilla toys? They are sofubi soft vinyl hollow rotocast cast vinyl. Usually painted with acrylic paint I believe.
@spectorcreative18723 жыл бұрын
Same type of treatment should work
@legion0783 жыл бұрын
Thanks for another interesting video about the science behind toys we all love. I got a question about HotWheels Police cars: Back in the 90's almost all of their Police cars had their flashing lights on the roof. But today there are hardly extra blue or red plastic parts on their regular 1/64 scale vehicles. Is there any reason behind it? Is there a choking hazard if they break off or have they just become too expensive? I couldn't imagine it's a licensing issue, but a Police car without flashing lights is a bummer to me. Other companies like SIKU always put them on their Police vehicles. Thank you & best regards from Germany.
@ryansargent6613 жыл бұрын
I know that some modern police vehicles have all the lights inside the car, so they don’t have a light bar on top. Hot Wheels may be making without the light bars to mimic this, or it could just be a money saving measure (less part can make something less expensive to make). It also could be both or neither, I’m just using observations from the real world to explain why Hot Wheels may be producing police cars like this.
@legion0783 жыл бұрын
@@ryansargent661 Thanks, yes that's probably part of the reason. Designs have changed over the years and brought some amazing light effects to such vehicles. But often they even show the flashing lights on the card, but don't incude them on the model for example on the Lamborghini Aventador Coupé (Dubai Police).
@spectorcreative18723 жыл бұрын
You know I am not 100% sure but I'll reach out to some Hot Wheels designers I know and see what I can figure out!
@legion0783 жыл бұрын
@@spectorcreative1872 thank you so much, Scott!
@evantang39392 жыл бұрын
@@spectorcreative1872 so wat have u figured out
@peterlaforteza15533 жыл бұрын
My MOTUC He-Man is the stickiest man in my cabinet. And almost all human boots and Hordak’s arm bands. I was told car dashboard cleaners do the trick too. Haven’t tried it yet though.
@spectorcreative18723 жыл бұрын
I've heard that too
@timt1543 Жыл бұрын
Like Armorall?
@astraltactical20733 жыл бұрын
Scott, to what extent is the paint chemically bound to the figures? I guess the oils go through the paint? The paint must really be stuck on there, and also porous, because I've seen a video where a guy dyes a bunch of figures right through the paint using black dye. What sorts of paint questions did you have to navigate when producing the toys in your lines?
@spectorcreative18723 жыл бұрын
It isn't chemically bound as much as an adhesive.
@Aeric983 жыл бұрын
Awesome info
@spectorcreative18723 жыл бұрын
And thanks for the comment post!
@xeppozanfilms3 жыл бұрын
Thank you!
@spectorcreative18723 жыл бұрын
Glad ot help!
@MrDrokkul3 жыл бұрын
Clean them with a citrus based cleaner such as Goo-Gone. It works great and seems to stop or greatly slow down them becoming sticky again.
@CaptainStarlight3 жыл бұрын
Just be careful. If you soak particularly bad parts or figures in Goo-Gone for too long (upwards of 5-10 mins), it does affect the paint, especially when rubbing them afterward to get the goo completely off. Noticed this on a few vintage MOTU, TMNT, Thundercats.
@spectorcreative18723 жыл бұрын
Nice. I like that formula. Writing it down
@jeffreyholley43072 жыл бұрын
thank you
@spectorcreative18722 жыл бұрын
Glad to help!
@mrdontknowhatguy36073 жыл бұрын
Scott can you talk about that one dc super friends toy line that came out back in 2007 because I haven’t seen a detailed video about them
@spectorcreative18723 жыл бұрын
The one for kids with the big feet? I"ll add it to the list!
@mrdontknowhatguy36073 жыл бұрын
@@spectorcreative1872 yes the one with the big feet and the box with that cool artwork
@TitularHeroine3 жыл бұрын
Yes please! The 4" ones were usually called Batman Unlimited and the 6" are Total Heroes (iirc).
@hordakalpha3 жыл бұрын
None of my MOTU or other figures that I know are doing this except one which is a cheaper knock off figure. Does just touching a figure with your hands make this break down process happen faster? Does indoor light sources like lamps cause degradation? I keep all of mine out of sunlight since I know that is dangerous to plastic.
@spectorcreative18723 жыл бұрын
No indoor light should not contribute
@hordakalpha3 жыл бұрын
@@spectorcreative1872 Good to hear.
@cianarki38042 жыл бұрын
Would be much more convincing if you have an application video using all the methods that you've mentioned.
@spectorcreative18722 жыл бұрын
I’ll see what I can do
@OiGin95693 жыл бұрын
My malakeli was sticky and some of my vintage Star Wars figures are also getting small dark blemishes like mold especially on Jabba’s arm.The one in my profile picture.
@spectorcreative18723 жыл бұрын
Yuck indeed!
@rumblehat43573 жыл бұрын
I haven't had this issue with my old Star Wars action figures, but I do with a 1990s era Don Post Boba Fett helmet. The inside is white and unpainted, but sticky. The outside (which was painted) is fine.
@spectorcreative18723 жыл бұрын
It is not universal
@rumblehat43573 жыл бұрын
Spector Creative I’m sure it’s not, I’m just saying it seems to affect other things besides action figures.
@jamiekelley58563 жыл бұрын
Thank you!! I have a Superman Alienware mousepad from '05 that's doing this and it's driving me nuts, lol
@spectorcreative18723 жыл бұрын
Glad to help!
@johnedragoon47293 жыл бұрын
I'm trying mod podge on a few classics. What I really want to try it out on is temple of darkness sorcereress.
@spectorcreative18723 жыл бұрын
She got sticky?
@johnedragoon47293 жыл бұрын
@@spectorcreative1872 severe sun damage and peel. I had her on a doll stand hoisted above the castle. Presentation may be a good topic poser puns are fun.
@nobo16823 жыл бұрын
how about soft squeezable and pliable plastic parts?
@spectorcreative18723 жыл бұрын
Well those are done like that for design
@nobo16823 жыл бұрын
just wondering if a sealant or paint are applied, would the act of flexing and moving cause the paint or sealant to crack or become less effective?
@edwardjohnson67443 жыл бұрын
I always thought it was the paint melting from the heat in my mom's attic.
@spectorcreative18723 жыл бұрын
Heat doesn't help but it is the plastic degrading!
@MrHemanclix3 жыл бұрын
my old Spikor had the worst combination of sticky and brittle. the legs were the stickiest of all the other He-Mans I gave to my Son. when one of the corners of his spiky covering came unplugged from his neck I tried to plug it back in. his whole torso slowly started to crumble in my hands like an eggshell. ☹️
@spectorcreative18723 жыл бұрын
That is not fun at all!
@MrMark-hm9lk3 жыл бұрын
What's that magic too hot for toys temperature?
@spectorcreative18723 жыл бұрын
Just under a boil is good.
@MrMark-hm9lk3 жыл бұрын
@@spectorcreative1872 🤣😆
@maverick72913 жыл бұрын
How toys get sticky Hentai toy collectors: Hey they were sticky before I got to them! And it's none of your business! ... what's that ? You mean in general? Oh ok ya I'd like to know why.
@spectorcreative18723 жыл бұрын
Better not ask
@ZeroAnalogy3 жыл бұрын
I was wondering why there was a sign that read, "Display Only. DO NOT TOUCH!"
@固體蛇 Жыл бұрын
Why some plastic last so long while some (especially the japanese made) doesn’t. Prequel Star wars figures from early 00s are all sticky but my gi joes and he-man from the 80s are still perfectly fine except the leg rubber band which is a relatively easier fix
@jackkopix66123 жыл бұрын
My gundam plastic figures got sticky after 20years. What I do is that I put them into hot water(not boiled water) with dish wash soap. After one hour, rinse them and put them into cold water again with baking soda(the one for cleaning) for another 2hours. If it still sticky, get a product called "de-solv-it", it's from Australia. Pour a bit onto a cloth and wipe it directly onto the figures. It will remove the sticky and oil immediately like brand new toy. Though it will become the same again after 3 months. I just repeat the process. Hope it helps !
@spectorcreative18723 жыл бұрын
Great solution!
@jonathanmora47243 жыл бұрын
90s/00s electronics used to be cover with rubber oil for a premier feel but unopened or unused devices became so sticky
@spectorcreative18723 жыл бұрын
It is very true
@RetroActionUK3 жыл бұрын
3:31: Hasbro’s trying to break its own toys! A Real Action Breaker!
@spectorcreative18723 жыл бұрын
Well you know...
@RetroActionUK3 жыл бұрын
@@spectorcreative1872 knowing is half the battle!
@TomatoTomato9112 жыл бұрын
Water/acrylic based top coats are best. Avoid enamel as they dont go well with rubber. Lacquer is a 50/50. When the coat is not compatible what you get is a clear coat that never ever fully cures and will feel sticky...
@spectorcreative18722 жыл бұрын
Excellent addition
@TomatoTomato9112 жыл бұрын
@@spectorcreative1872 even so there is a chance they still leach out tru the top coats...
@EckerKyle3 жыл бұрын
My 2018ish marvel legends human torch is pretty gummy, idk about sticky tho. Probably not old enough
@spectorcreative18723 жыл бұрын
Give it time...
@trialsandtribulations71813 жыл бұрын
Oy, your understanding of science is awful. Diffusion is the process of mixing the plasticizer with the polymer slurry so that you have an equal distribution. Using your oil/vinegar example this is when the oil and vinegar mixed and looks like one singular fluid. Your video is describing separation, specifically phase separation. Separation is when you take your mixture of oil and vinegar, let it stand for a bit, and the two components separate to look like two different fluids stacked on top of each other. This is also called stratification. Your video addresses phase separation where the liquid elements of the plasticizer are moving away from the solid elements of the polymers due to internal pressures.
@spectorcreative18723 жыл бұрын
Exactly why I am not a scientist!
@ZeroAnalogy3 жыл бұрын
Scott is not a scientist (chemist/physicist), he only plays one on KZbin. It's all about the lab coat.
@trialsandtribulations71813 жыл бұрын
Obviously not a scientist, but this is adolescent/junior high level stuff. Or to think of it another way this is the stuff that makes up a kid's first science fair project or the random curiosity that fuels kids' questions when you're at the deli. PS You should definitely hold in reserve some yellowed stormtroopers for your kid's first science fair.
@neburselasor3 жыл бұрын
Great information, sir. I have a few questions, though: 1. Can the natural oils from your hands exacerbate this problem? If you always handle your action figures with gloves, would it make any difference? How about climate control? 2. Do you think the formulas for action figure plastics have improved over time in this regard? 2. Since this degradation process is something people are aware of, do you think it might be feasible for toy companies to one day go the extra mile and add some sort of sealant to the plastic right off the assembly line? Thanks!
@spectorcreative18723 жыл бұрын
Hand oils of course can contribute. As for toy companies changing materials for long time preservation of the toy, I wouldn’t count in it. Toy companies make these for kids. The collector market is just too small to justify that
@rhuman86723 жыл бұрын
It would be great if they could make legislation for making things last. Similar to the right to repair laws.
@benflay60383 жыл бұрын
Isopronicol alcahol but vac chrome does go brittle and can be like a biscuit crushed ...now brand new toys being brittle like necca or say a green godess that's poor
@spectorcreative18723 жыл бұрын
Oh very much so
@aaronburrell37293 жыл бұрын
Dip them in a polymer like rhino lining.
@spectorcreative18723 жыл бұрын
Nice!
@FNHot3 жыл бұрын
I was hoping you'd explain what a polymer was, in that it's an extremely long chain of molecules, usually hydrogen bonds, that over time, break down. It's from Greek, "Poly" meaning many, "meros", meaning "part", literally many parts. Also it's pronounced pah-la-mur, not "pa-la-meer" or "pa-la-mare". Great video though!
@spectorcreative18723 жыл бұрын
I appreciate that! I am not at all a plastic expert and not a scientist by trade at all. Great post
@astray4013 жыл бұрын
Clean it as you suggested and then put it into freezer overnight.
@spectorcreative18723 жыл бұрын
You can change the temp with cold, but heat is better
@CyberDragon10K3 жыл бұрын
Transformers fans have been looking into this sort of thing regarding Hasbro's recent blast effects as well as certain older toys like RotF Bludgeon's soft tank treads actually _melting_ the hard plastic bits they come into contact with over prolonged periods of time. Blast effects seem to be just a stripping paint sort of deal last I checked. www.tfw2005.com/boards/threads/psa-new-toy-plastic-condition-discovered-melted-soft-rubbery-parts.1107350/
@spectorcreative18723 жыл бұрын
And they are tough with the die cast
@CaptainStarlight3 жыл бұрын
I noticed this with my Lightning Collection Mighty Morphin' Red Ranger. The lightning effect that goes around his sword blade reacted with the paint. But then again, the paint on the sword handle reacted with his hand. Argh! Painted weapon handles drive me crazy!
@Cincinnatijames3 жыл бұрын
I just soak my MOTU figures in Armour-All and give them a good wipe down.
@spectorcreative18723 жыл бұрын
Nice!
@brushstroke37333 жыл бұрын
Sounds like a good idea to me.
@CaptainStarlight3 жыл бұрын
Hmm, might be an option to consider. Do you completely submerge them and how long do you leave them in?
@dantealexander98632 жыл бұрын
What is MOTU? And , doesn't that damage the figures?
@Cincinnatijames2 жыл бұрын
@@dantealexander9863 Master of the Universe
@bobastu3 жыл бұрын
Thank you for the advice. John Cleese was Q...😱😱😱... best decision ever, lol. I remember reading years ago that the arms of legs of 3¾" 70s and 80s 5POA figures had more plasticizer than the bodies, and this is why the discoloration happens at different rates. In addition, the molecular separation of the plasticizer can make the parts more brittle. Do MOTU chest and back pieces get as sticky as heads, arms, and legs?? On my second car, I needed the front bumper repainted. They never added the plasticizer to the paint, so the slightest flex in the plastic bumper caused the paint to start chipping. Plasticizer seem to be used everywhere. Again, great video.
@spectorcreative18723 жыл бұрын
Oh yes. Hé should be in everything
@stanleyteriaca21843 жыл бұрын
I know why toys get sticky. And we should be ashamed of ourselves.
@spectorcreative18723 жыл бұрын
Oh dear…
@yellowgut3 жыл бұрын
Washed my sectaurs a few years back and the stickiness hasn’t returned, that’s as far as I’m willing to go.
@spectorcreative18723 жыл бұрын
Nice!
@kimo_3 жыл бұрын
And thats why Im not sure buying action figures. I had a very cool Neca Gremlin's Stripe bought in 2000s. No more than 10 years later then I found the figure sticky. But that was not the worst. Transparents conectors in shoulders broke easily and he loses the arms. i had too a Superman action figure. I cant remember who made it. It was all the time in the blister. Someday I decide open then their hands broke so easily as the gremlin arms. Oh, and my DC Direct 1/6 Superman Returns. Open but I conserve it always in the box. Then one day I found the blue color in the suit with all white. So, I have not bought more action figures but Playmobil. 70's and 80's Playmobil use to be in great condition. But now im buying Masters Origins. Im pretty afraid...