Why you need to upgrade the steering stem bearings on the Yamaha PW50 and how to do it

[@DJStroble]

Got mine ordered. Thank you for the tips.

[@John5XR]

Thanks for commenting!

[@Rozenxz]

dam buddy you're kid Is growing up quick! I found you doing research for stacyc. on your battery video. I got my 3 year old a pw50! I look forward going through your content! I have no motorcycle experience and my kid doesn't reach the ground so honestly I'm scared of him tipping over on it 😅 I also live in the city so it's hard to find a space close by for him to practice. wish you and your family the best.

[@stevenllewellyn8906]

Awesome! My 2 1/2 has been riding on his and loves it. I built centered training Wheels. You can build them or buy them as a kit for around $100. Also I’d recommend a 1/8 or 1/4 easy turn throttle tube. I changed the clutch springs out too. It was taking way too long to get going. Supposedly they call for replacing the springs every 10-15 hours. Much easier for him to ride now with his small wrists.

[@mdacosta7013]

Did you ever hear of Marshin pit bikes that's what I have I just got it and I can't find nothing online about them the motor however looks exactly like the pw80 so when I order parts I just my pw80 stuff and it works so far the steering stem in mine has a ton of play when I took it a part it looks slightly different from your and it didn't have the top bearing or race it's very odd and needs to be fixed

[@crazybob1954mo]

OK, For the bottom race... I just used a small sanding drum in a Dremel tool and and opened the inside of the race a bit. It still fits tight and without any movement, but only needed to be lightly tapped into place. I also put extra grease on the bearings when I installed them...

[@bikelife_gus319]

I remember you had a video on the pax racing kit and the top race wouldn’t thread on. Is it still on ur channel?

[@petrsson]

I would like to ask you,if you have any idea,where can I install hour meter on Yamaha PW50, please??? ( I don't see any space for it)... 🤔

[@fullnoyz7670]

I put mine up where the petrol tank shrouds are with sticky Velcro, if that helps

[@petrsson]

Where did you buy upper small bar with foam protection) on steering bars,please??? 🤔

[@brandonkriesel8856]

Mika metals but you will need risers as well.

[@anthonycorcella7300]

It looks like these aren't available any more?

[@brandonkriesel8856]

They are still on pro flo racing