Why you WANT an FM TURBO! FM Live 2-1-24

[@Buzz65]

Best and probably ONLY complete turbo system that is emissions legal.

[@dcvroom]

Purchased and installed with a friend, As a basic DIY'er I can attest to this kit being incredibly complete and the instructions as good as they can possibly be. I literally needed nothing from the local car parts place. They have it configured down to the last zip tie. Application 2001 LS 6-Speed. Added the coolant reroute at the same time. Caught oil pressure and start from the first turn of the key. That's a rarety for my projects.

[@onlywenilaugh6589]

Was the power gain worth it to you? Big difference?

[@dcvroom]

@@onlywenilaugh6589 oh yeah. Kit is good for 6-8psi, with the stand alone running 14 psi. Butt dyno is happy!

[@FlyinMiataVideo]

We appreciate the feedback!!

[@dcvroom]

@@FlyinMiataVideo love your products, my bank balance does not😏

[@MrThomaskirchner]

Love you guys for everything you’ve done for the community and all… but I waited for over 6 months for NA/NB turbo kits to come back in stock… bought a Kraken full kit.

[@FlyinMiataVideo]

Sorry to hear that. We’ve shipped dozens and dozens of kits in the last six months. As soon as they come into stock, they sell. The best way to ensure you get one is to sign up for notifications and be ready to act. We’re working hard to get on top of demand and have them in stock all the time. Sorry we weren’t able to get one to you.

[@StephenTownsend-z3k]

I'm going to add "lack of mechanical empathy" to my automotive lexicon ;)

[@hoaarts6700]

Just read the carb compliant paper, the 99 year is finally included! Woooooo!

[@FlyinMiataVideo]

1990-2005 😎

[@FlyinMiataVideo]

Note that while we have the paper to cover the two-cat 99-00 cars, we do not have the hardware at this time. Currently we only have kits for the single cat “federal” cars. We did touch on that a bit during the video.

[@AliAbdelaziz-bq3rn]

@@FlyinMiataVideoso does that mean we still get the exemption/car wont run properly? Sorry im a little confused as I have a 99' with the large precat in the header (CA specd) does this mean I cant use the kit in CA???

[@FlyinMiataVideo]

@@AliAbdelaziz-bq3rn Our kit removes the first cat on 99-00 CA emissions spec Miatas, meaning the CARB-EO will no longer be valid.

[@Mr2009KEVIN]

You guys are the pinnacle of Miata parts and performance, always finding new ways to better all miatas. I'm wondering if you ever thought about trying to convert a 1989-1995 Miata obd1 to 1996 and up, to obd2? If so, how far did you get before scrapping the project?

[@FlyinMiataVideo]

I'll answer this one by referencing our 1.8 swap instructions for NA6 owners. We suggest keeping all electronic parts and wiring on the NA6 chassis unless you're looking for a long, tedious project with little to no benefit. I know everyone has their reason for a certain mod but I'm not seeing a benefit on this one. What's your angle?

[@therealChristopher231]

Good video learning a lot

[@FlyinMiataVideo]

We appreciate it!

[@beexiong9047]

Love the video. Thank you!

[@FlyinMiataVideo]

Glad you enjoyed it, and thanks for watching!

[@agunther08]

I do want an FM turbo - I do! For my 2020 ND2!!!

[@FlyinMiataVideo]

We agree and all in good time.

[@danieldelacruz53]

My kit just arrived today!

[@FlyinMiataVideo]

Awesome! Don't hesitate to contact us if you have any questions about the installation.

[@dw4lubu]

Wait how did you get one for the Nc??

[@sharthun2009]

Where is the NC Turbo you promised would be released in 2024?

[@FlyinMiataVideo]

We aim for a release around Summer of 2024.

[@nickclarke5061]

Can you use the new exhaust manifold on a stock exhaust?

[@FlyinMiataVideo]

Yes, you can use a stock exhaust from the cat back.

[@Mike-Home-Cook]

Will this kit still work with a rebuilt overbored engine? +0.5mm +1mm +2mm? Changes in compression?

[@FlyinMiataVideo]

@Mike-Home-Cook The turbo kit would still bolt up and function normally to an engine with an overbore, yes. However, if you're increasing the compression ratio, that could affect the safety of your engine. The Voodoo box isn't capable of pulling ignition timing, so it wouldn't be able to compensate enough to prevent detonation.

[@manitobaoutdoors7705]

When are the NB turbo kits available?

[@FlyinMiataVideo]

Our next NB turbo kit restock is expected within a few weeks! No exact ETAs to share just yet, though.

[@FlyinMiataVideo]

@@Unfamiliar1-rh2zr We don't have an ETA to share for that, unfortunately. We plan to bring back the individual manifold listing once we have enough inventory to fulfill both complete turbo kit orders and individual orders comfortably - it could be a few more months.

[@11michaelm72]

What would be involved in switching my Mazdaspeed NB factory turbo with the Flyin' Miata Big Enchilada kit to the new turbo kit? Feasible?

[@FlyinMiataVideo]

Because the Big Enchilada was designed to work with factory turbo components, it's not really compatible with our complete kits. There are a few parts such as the intercooler that are shared, but the majority of the kit is different. Even the bypass valve is different as we had to match the MSM port size. The best option might be to remove your complete MSM turbo system and sell it separately. It's hard to justify that, we'll admit.

[@anglegrinder]

any experimentation with the GBC20-300? seems like a good replacement for the 2560r and simplifies install.

[@FlyinMiataVideo]

We tested a lot of turbos when we first developed this kit, a long time ago, and haven't found a good reason to change the turbo yet. It has quick spool up and enough headroom for folks that want to run another engine management system. How would it simplify the install?

[@alfredochi7624]

How about the turbo for the nd?

[@FlyinMiataVideo]

This video is about our NA/NB offerings. We have others that talk about our NC and ND turbo systems.

[@toddcouch1579]

I got my kit last week and looking forward to getting it in and running. I'm sure this question has be asked and answered in the past, but in doing a quick search, i can't find the answer. After the parts have been removed, replaced and added, what it the net weight gain of adding the turbo kit? I have a 2001. Thank you

[@FlyinMiataVideo]

Please email our customer support team, and we can try to get you a detailed answer.

[@1knowsnothing1]

TLDW: Do the new manifolds allow fitment of other T25s like the Borg Warner? Or are they designed around the GT style turbos?

[@FlyinMiataVideo]

All of our turbo kits are designed for genuine Garrett turbochargers - Garrett has always been our go-to choice for long-term reliability and power at a reasonable price. FWIW, our NA/NB and NC turbo manifolds do utilize the T2/T25 bolt pattern. Also, the turbine outlets we designed for our turbo kits utilize the standard 5-bolt Garrett turbine housing outlet bolt pattern.

[@xenokyomi]

Question regarding the EGR, on a stock tune would there be any issues deleting/blocking off the EGR system? For someone with an AUDM car, pretty much every header/turbo manifold is incompatible with the EGR we got here, so just wondering if there would be any damage to the engine if this system was removed, or rather blocked off?

[@FlyinMiataVideo]

To keep me out of trouble, I'll answer your question referencing the US spec 1.6. which doesn't have an EGR system from the factory. Our piggyback system, the Voodoo box, doesn't calculate for the EGR system. In short, if your county, state, country, galaxy, or universe doesn't require an EGR system, the turbo kit will still work fine.

[@BZXT]

For a 00 miata with a stock bp4w, if i install this kit along with a squaretop intake manifold, will the voodoo box accomodate it?

[@FlyinMiataVideo]

It should. Our turbo squaretop testing was on a 350 hp engine, and the squaretop didn't make any difference until the engine got above 6000 rpm. At the lower power levels here, it may not make any difference at all. It would be a good idea to use a wideband O2 to monitor air/fuel at the top end as you set your boost to make sure.

[@BZXT]

@@FlyinMiataVideo thanks for the response! From the results of your test, would you say it is favorable to install the squaretop on a dual duty miata with the turbo kit?

[@FlyinMiataVideo]

At this power level, it may not be worthwhile. But it certainly won’t hurt.

[@dgris7944]

In the video you mentioned fuel economy may actually improve slightly on the highway. What would the effect on fuel economy be daily driving around the city?

[@FlyinMiataVideo]

That depends on how much you use the extra power. If you stay out of boost, it won’t change noticeably. If you’re using boost, you’re making more power and you will burn more fuel.

[@andygarcia2813]

Awesome video. I was able to get my hands on a used NB turbo kit which I'm going to take everything apart and clean it up. Any recommendations on what to look for and/or what should be upgraded prior to reinstalling it on a different car? Im sure Im going to have to replace some parts but wonder if there is anything specific to look for.

[@FlyinMiataVideo]

Since there have been a lot of evolutionary changes over the decades, it’s probably easiest to contact our customer service team directly with details.

[@andygarcia2813]

@FlyinMiataVideo OK great thanks for responding. I'll reach out to guys by phone.

[@FlyinMiataVideo]

@@andygarcia2813 In short, make sure you have Inconel studs at the turbo to manifold, all mating surfaces are flat (manifold to turbo, turbo to outlet, outlet to upper downpipe), and the turbo is in good shape. We can get into the details when you call or email us.

[@andygarcia2813]

@FlyinMiataVideo Thanks. I actually spoke to Nick from your team on the phone and he mentioned those same things and some other things to look out for. He was a great help.

[@BakouMOH]

Would a lightened flywheel be a good or bad idea with this turbo kit? Since you need to upgrade the clutch anyway...

[@FlyinMiataVideo]

We like light flywheels with turbos.

[@dcvroom]

I run a lightened fltwheel on my 2001 w/FM kit, works great.

[@VinceCannavaII]

ND2 options?

[@FlyinMiataVideo]

We don't have any turbo options for the ND2 yet, unfortunately.

[@hetori9918]

What should I do if I want that sweet 240hp to the wheel?

[@FlyinMiataVideo]

To reach that power level, you will need a programmable ECU and larger injectors.

[@nappy2720]

Hey what’s up guys? I have a automatic 1990 miata with 47k all stock miles. What would be the best kit for reliability?

[@FlyinMiataVideo]

We only have one turbo kit option available for your NA6, and it's very reliable! However, you may or may not run into fitment issues with the downpipe on an automatic trans.

[@huntman777]

So in the past, the 99 Miata didn’t pass smog in Cali with this kit! Does it pass now?

[@FlyinMiataVideo]

For 1999-00 cars with California emissions (two catalytic converters), this kit will remove the first cat and the EO will not be valid. If you have a non California emissions '99-00 in California with our turbo kit, there won't be an issue. If you don't know if you have a CA spec'd Miata, have a look at the exhaust manifold. If it has a cat integrated into it, it's a CA spec car.

[@s197bullitt4]

We need a ca spec legal kit!!!

[@FlyinMiataVideo]

​@@s197bullitt4 It would require a completely new manifold, intake, hot side intercooler piping and downpipe. Basically, anything that's connected to the turbocharger. That's a big investment for a small number of cars, which means it would be quite expensive.

[@mihaiserbanescu8676]

So you mean to tell us that this turbo kit will develop up to 260 hp at the wheels, without touching any of the pistons, connecting rods or main bearings? What about head gaskets and selling in Europe? If I'd order from europe, I think I would be destroyed by a sea of taxation, right?

[@FlyinMiataVideo]

There should be no problem either way head gaskets either. We do ship to Europe. The taxes will likely be the same as if you bought locally, although there can be paperwork fees for the importation process.

[@onlywenilaugh6589]

They are always out of stock ever since I bought my 2003 back in 2019, I can never catch them in stock.

[@FlyinMiataVideo]

Sorry about that! Demand is very high, and it's important to act fast once we have a restock. We always recommend that you sign up to be notified when they come back in stock for the best chance at securing a kit.

[@RideShootDrink]

Why don't you sell Vodoo boxes separately???? I have your kit with Hydra Nemesis, and I want to be Cali compliant, and you won't sell me that Voodoo box...what's up with that??? And yet you sell that conversion AFM elbow! Unfair!! Very unfair!! 5 speed or 6 speed?

[@FlyinMiataVideo]

Because of the way the Voodoo Box interacts with the emissions system, we cannot sell it unless it’s part of a kit with an EO. Sorry about that, but we have to work within the law. As for your transmission choice, it’s a matter of gearing. A 5 speed with a 4.1 is a good all-around match, a 6-speed with a 3.6 is more challenging to find but gives you some nice freeway legs.

[@RideShootDrink]

@FlyinMiataVideo I have an unaltered, stock emission system. My car passed the smog in California last year. Minus the suspension mods, my car is stock. I have a second engine with your kit, and the only two things that prevent me from dropping this engine in my chassis is a need to install the elbow and voodoo box. Complainant CA parts to bring it to a legit CA state. You refuse to sell compliance parts, but you sell parts for the off-road use. Ridiculous!

[@FlyinMiataVideo]

@@RideShootDrink Sorry for the frustration. We do not sell parts "for off-road use", as that is not a legal category of parts or cars. The AFM conversion kit does not remove or alter any stock emissions components. The Voodoo Box does, which puts it in a different class legally and why it can only be sold as part of a complete, compliant system. It may seem ridiculous to you but it's how the law works. Please contact our customer service department directly and we'll see if we can work something out for you.

[@RideShootDrink]

@FlyinMiataVideo thank you, I will be in touch on Monday.

[@Aaron31424]

I’m buying a kit, I will trade you the voodoo box for your hydra or just buy it from you.