Wi-Fi Marauder Magic Unleash Your Flipper Zero's Power in Minutes!

PLEASE NOTE: THIS IS ONLY FOR EDUCATIONAL PURPOSES MODERNBROADCAST DOES NOT CONDONE OR SUPPORT ANY ILLEGAL ACTIVITY PLEASE USE AT YOUR OWN RISK
Welcome to ModernBroadcast.
In this quick introductory guide and tutorial, I'm going to show you how to add Wi-Fi capabilities to your Flipper Zero device using a $35 development board.
If you're not familiar with the Flipper Zero, it's an all-in-one Tamagotchi-inspired hacking tool that's packed with features like Infrared, GPIO pins, RFID, NFC, IButton, Sub-GHZ, a Micro SD card slot, and even a cute dolphin pet. It's like a Swiss Army knife for hackers and tinkerers.
But if you want to take your Flipper Zero to the next level, you can add Wi-Fi connectivity using the GPIO pins on top of the device and a special development board. This will allow you to connect to wireless networks, send and receive data over the internet, and even control other devices remotely.
In this video, I'll show you how to set up the Wi-Fi development board to use Murader Firmware and connect it to your Flipper Zero device. I'll walk you through the steps and provide tips and tricks along the way, so you can get the most out of your Flipper Zero and unleash your inner hacker.
So if you're ready to take your Flipper Zero to the next level with Wi-Fi connectivity, be sure to watch this video and follow along with the tutorial. And if you find this video helpful, don't forget to like, comment, and subscribe for more content like this.
Thanks for watching, and happy hacking!
Flipper Zero Unboxing Video Link: • Tamagotchi Hacking Too...
[Flipper Links]
Flipper Zero: flipperzero.one/
qFlipper: flipperzero.one/update
Flipper App "Store" : flipc.org/category/gpio
FZee Flasher: fzeeflasher.github.io/
Marauder Companion : github.com/0xchocolate/flippe...
[wifi board case]
www.thingiverse.com/thing:579...
[Want to support ModernBroadcast? Do so below!]
ko-fi.com/@modernbroadcast
#FlipperZero #Dolphin #Educational #Hacking #DeviceReview #FlipperZeroUnboxing #FlipperZeroConsoleReview #Flipperdevices #MultiTool #ModernBroadcast #ethicalhacking #Flipperzeroreview #Flipperzerounboxing

[@gizzer644]

Ive been trying to get mine to work for so long. Thank you very much, please keep posting

[@ModernBroadcast]

Did it work?

[@gizzer644]

@@ModernBroadcast yep worked first time. Was easiest way I found so far

[@ModernBroadcast]

@@gizzer644 oh that’s great. A lot of people were experiencing issues following this. Did you notice anything different or run into anything?

[@gizzer644]

@ModernBroadcast no nothing at all, it was far easier then the github way. I could never get that to work, but the website worked first time

[@Hater88888]

How to save ssid name on wifi marauder after created?

[@alienmajik3798]

Kinda of doesn’t make sense to add the btsniffer or anything Bluetooth related since the esp32 board does not have blue capabilities

[@mikecarroll757]

The esp32 wroom boards do.

[@luist8868]

Hello again... The flashing process was very simple as you stated and by all indications on the FZEE FLASHER screen, all went as described, BUT my Flipper Zero GPIO does not show the Marauder firmware listed after disconnecting. I have tried both the FZEE FLASHER and the other method you described to flash the Dev board and both methods indicate a successful flash, but nothing appears on the Flipper Zero device. My Flipper Zero is new... is there more firmware to be loaded on to it before this can be successfully done? Any ideas?

[@ModernBroadcast]

This is really tough to say because it seems that it’s a varied experience from user to user some people follow the video start to finish and it works without a problem others follow the video start to finish and it doesn’t work for them. For me personally I have the unleashed firmware. I just updated it to the newest update and marauder works then when I follow my video that I flashed for evil portal that also works unfortunately I don’t have the key to why it’s not working exactly for you or others. If you happen to stumble across the solution, if you could please share it so I can share with others when they ask me why it’s not working for them and hopefully it’s a simple step or solution Thank you for your time on this matter. Hope you have a great week.

[@luist8868]

Problem solved by switching to the Marauder instead of using the stock Flipper Zero firmware. One more question please... do you know how to open a Flipper Application file (.fap) to be able to look at the Wi-Fi access points on my PC? Thanks!

[@Hackdaplanet-lp1ex]

3 second to be exact..hold and plug boot..n let go,and bang ,u flash esp 32

[@BRADASSOFFGRIDHOMESTEAD]

Dual boot is the way to go.

[@ModernBroadcast]

Id be curious to make a video on this AND actually do so, can you share how you got yours up and running?

[@garyabrigo1697]

I have installed the drivers but it still does not recognize my ESP32

[@ModernBroadcast]

Someone commented that its already out of date so I'll need to look at the video and new method again to see. Sorry.

[@keithmeyer9450]

my flipper looks slighty different, yours says applications but mine says apps, they are the same thing but i still dont see esp32 wifimaruader. all i see is GPIO edit: i think i need the driver but idk which driver to download

[@williamspies2739]

This is the exact same problem I have

[@keithmeyer9450]

i downloaded extreme so using the extreme firmware fixed my issue @@williamspies2739

[@youdjparents]

same

[@dajjal6889]

I only get the marauder application with the question mark, it gives me an error saying something about an outdated application.

[@wack808]

See if you need to update your flipper

[@ModernBroadcast]

Either your fap file is out of date or your flipper needs to be updated to use that version. In most cases anyway

[@armandovaldez4029]

The Flipper App Store isn't working know anywhere else I could download Marauder?

[@ModernBroadcast]

lab.flipper.net/apps

[@SulfuricDrop3]

nothing on this works for me ive tried everything is the board i got just broken or do i not have the right files or firmware on the flipper

[@ModernBroadcast]

Other people have reported this also. My goal is to make another another video on it to showcase it working.

[@laser_detxx]

the website has changed... need an updated video

[@ModernBroadcast]

Which link isn’t working as I clicked on it and it appears to be okay

[@luist8868]

My Flipper Zero froze and will not respond to any commands, including power off. Is there a reset to this device apart from the power button?

[@ModernBroadcast]

Holding left arrow and the back button a few seconds

[@luist8868]

@@ModernBroadcast Thanks that did it. 👍

[@S3ARCH_N_D3STROY]

why does yours say esp32 wifi marauder and mine says Mayhem Marauder?

[@ModernBroadcast]

Could be an update since I’ve uploaded the video. Where is it saying mayhem marauder?

[@S3ARCH_N_D3STROY]

@@ModernBroadcast I had xtreme and was just showing it under apps - gpio. I re flashed it with momento and it’s all good now

[@keithmeyer9450]

ive been researching and still cant get it to work

[@ModernBroadcast]

What’s inside the apps folder?

[@keithmeyer9450]

bluetooth, gpio, games, infrared, nfc, rfid, sub-ghz, usb, and ibutton@@ModernBroadcast

[@tacoma08]

@@ModernBroadcast I click GPIO and it's the items from default. I've watched so many videos and can't figure it out

[@gcmotive]

daf ;] i need how to play arcade games and open garage parking gates or garages thanks alot

[@ModernBroadcast]

Arcade games not sure how to help you there unless they're utilizing a NFC component. and parking garages you'd need to scour the realm of github and find the playground which might have a code that works. Please be advised most parking garages have cameras and I do not condone any theft or illegal activities so use at your own discretion

[@ydxbher]

We need an updatet Video!!!

[@ModernBroadcast]

Its already outdated? I'll look at it and add it to the very long list of videos I need to update/create.

[@MrBrofo1]

it doesnt work

[@ModernBroadcast]

What didn't work? Did you download the drivers?

[@MrBrofo1]

@@ModernBroadcast should have been more specific, when I plug it in and go to the website it doesn’t load onto my device board. I did hold the boot button and plug it in but I dont think the website works. My dev board is recognized but nothing gets downloaded on it.

[@Hackdaplanet-lp1ex]

😮 it works,,trust me ,,lol have alot fun wit evil portal...

[@Volk_of_Tabor]

how to fix the red light

[@ModernBroadcast]

Someone had mentioned this is already out of date, so I need to make a new updated updated video sorry.

[@suomynona7261]

Do it for Mac please anyone thank you

[@ModernBroadcast]

I will make a video on Mac here in about two weeks. I’ve started the recording process, but I have other videos slotted to come out before.

[@henrym3793]

All that happens when I sniff there’s 0 packets on wireshark

[@ModernBroadcast]

Someone had mentioned this is already out of date, so I need to make a new updated updated video sorry.

[@henrym3793]

@@ModernBroadcast would be great thank you

[@luxtaj3302]

A me ogni volta mi dice: torna più tardi amico Sai dirmi perché?

[@ModernBroadcast]

Non parlo italiano ma posso provare a utilizzare Google Translate per risolvere il tuo problema.

[@robertblakeley7873]

Another worthless tutorial. None of the jokers making these videos has a clue. They use a 500 step process that loses everyone. Seriously, count the steps. It’s ridiculous and not helping.

[@ModernBroadcast]

Noted. Have a good week