Installing Flipper Zero Marauder onto an Aliexpress Kasiin / DrB0rk Board

[@dtw6485]

1st method worked for me after I held the bootloader for 4 secs then pressed ec and let the two buttons go at the same time. Wouldn't work without that method for me

[@andykwan-d5m]

Thanks for letting everyone know man!

[@HyperActivatedVR]

You sir are an absolute legend, was stuck at this for HOURS. Thanks for trying and finding a way to actually make this board work! (PS, does anyone know how to disable the light from the multiboard?)

[@andykwan-d5m]

Glad it helped. Light has no actual switch (at least on mine) so you might want to put black tape or break the connection

[@HyperActivatedVR]

@@andykwan-d5m Alright, Thanks a ton!

[@Nothin2see_]

UART Bridge way worked for me, but I had to hot install the board as well. When the board was preinstalled before running UART Bridge, I was only getting data one way (TX) but once I took the board out the flipper, started UART Bridge and flashing processes, I plugged it back in after selecting option 1, It started reading perfectly. Thanks for this. I was getting more grey hair trying to get this working lol.

[@andykwan-d5m]

Glad it worked!

[@nostyle.666]

@14:05 if you have that problem i found carfully taking of the metal cover over the switch and bending the contacts straighter also add a bit more angle to the cover so it has more pressure when clamped back on

[@hamsmcham3238]

@10:12 This works like a champ!

[@sleep3806]

Could you show how to install the esp flasher on the flipper?

[@andykwan-d5m]

Yo dude, the esp flasher should be included in most custom firmwares. If you're interested, here's the momentum firmware that I was using in the video. momentum-fw.dev/ Go to the top right Close QFlipper Press Install

[@Realitywords89]

thank you a lot. but how to install the esp flasher you use?

[@andykwan-d5m]

The program is called FZEasy flasher which is in the description. Download it from GitHub -> releases and extract out of the zip

[@WERAS3545]

Hello brother, when I get to 7:48, after selecting option 1, I get the error: Other things to try: Failed to connect to Espressif device: No serial data received.

[@andykwan-d5m]

Start at 9:03 where I hot plugged the module

[@WERAS3545]

@@andykwan-d5m Same error

[@NeuroticBilly]

Have you tried evil portal (with marauder) on that board? because I put a SD card and it don’t detect it. And I saw on Reddit that it’s a problem of the board, but idk

[@andykwan-d5m]

I did. Did you try the option to integrate the system SD card with marauder? It should work like that; the sd card on the external board is known to be buggy

[@Tonymntanas]

Hi I am stuck at 6:40 I cannot see what commands you’ve typed in , can you help me

[@andykwan-d5m]

pip install -r . equirements python .\easyflash.py These will install the requirements for flashing and run the easyflash.py script.

[@Ibrah01920]

Can I get a link to a flipper zero on aliexpress? But it has to be from trusted resellers/company and I can’t get from the official website because they don’t ship to where I’m from

[@andykwan-d5m]

There really isn't a "trusted" link. I'd say to just find the cheapest one. Aliexpress's support is actually pretty good if you get scammed or anything.

[@Ibrah01920]

@@andykwan-d5m cool! They do have a welcome deal with a 1 percentage off on a flipper zero and it’s 323 dollars and I think it’s a bundle I’m not sure and it has 4 stars already so I will keep in mind about that and it’s a free shipping too

[@andykwan-d5m]

@@Ibrah01920 Unless you live in an area with crazy VAT fees (EU), I would just buy direct from bundle. What's in the bundle though?

[@Ibrah01920]

@@andykwan-d5m everything like the device and the WiFi board and prototype boards and sd card and any accessories for the flipper zero pretty much

[@jonkler-69]

Did you need to get it into boot loader mode? Or it just straight up went to it

[@andykwan-d5m]

many said that to enter bootloader, you'll need to hold the rst and bootloader buttons; rst first, then bootloader, release bootloader, release rst However when I did it in the video I didn't need to do that process for both methods.

[@jonkler-69]

@@andykwan-d5m since I ordered the same exact model as yours I'm gonna try without, thanks for your answer.

[@abobaaboba5902]

can you write 2 command in power shell please?

[@andykwan-d5m]

make sure you have python installed. since you have a flipper having python in the future will help greatly pip install -r . equirements python .\easyflash.py

[@Edel-Gabber]

Method 1: Built in F0 flasher don´t work! Bootloader error2 ! have the same board

[@andykwan-d5m]

What happens in method 2