Will 6.2 LS Engine Get This 57 Chevy Bel Air to Drive?

This 4th of July, get the ultimate shine for your vehicle with Avalon King ceramic coating 3-pack for just $99 at avl.kg/robby4july.
Watch us build the 6.2 LS on ‪@SummitRacing‬ channel.
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton...
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #lsswap #chevy

[@RobbyLayton]

This 4th of July, get the ultimate shine for your vehicle with Avalon King Ceramic coating 3-pack for just $99 at avl.kg/robby4july.

[@outlaw26aow61]

That 6.2 looks great in the 57 Chevy!!!

[@CycloneTS1]

@robbylayton When are you all driving through Iowa, or have you guys been through already?

[@inekelassooij840]

@@outlaw26aow61 24:26

[@clbzippo9]

Hi @RobbyLayton I’ve been watching your channel for some time now and I see y’all are at summit racing in Ohio and would like to no if I could meet you and hillbilly there b4 y’all leave

[@NICKSSHOP]

you just made that car junk with that just LS nice job should of put an 383 small block small block chevy not that LS that can use ford and dodge parts

[@retireddeloach]

Bracketry... this is why I love listening to Hillbilly talk. And, for those of you who think Hillbilly made up that word in his unique hillbilly way, bracketry is actually an automotive term for the mounting hardware used to hold one part to another on a vehicle. I love it! Hillbilly, Robby and Demery ROCK!!!

[@Unite.The.Kingdom]

That giggle at the end! You guys seem to be having the best time, who needs to vacation on a beach when you can play with motors.😊

[@rne143c]

Robby what a wonderful video ! I can't wait for you to drive this cherry Chevy home so you can take it apart and do what you do best... Bodywork ! This barn find has a new life and years from now Lincoln could be the most popular kid in high school ..... Thanks again to you, Hillbilly and the Boss !

[@robjohnson3376]

What do you mean cherry ?, It's a shitter with some shiny parts bolted to it, as an add for summit racing. You need to take off your beer goggles matey.

[@WDDetailing]

This is a donation to hillbilly’s lunch fund! That guy is salt of the earth! Can’t wait to see y’all drive that thing back to Utah 🤙🏼

[@Wildtr0ut]

I am so impressed with "Hillbilly's" knowledge and how he explains what he is doing and why. He's an "automotive intellectual."

[@DarKMatter.1]

@@theamerican8337I have to fast forward through most of what he says just because I can’t stand all the extra crap he says or tries to say anyhow.

[@survivingminnesota8381]

I love Hillbilly. He's true, authentic and un-rehearsed. Just like most of us viewers.

[@patcross5799]

Okay, a couple comments, first off I agree with Hillbilly about a shop apron, except for in the kitchen, I tend to wear an apron when I'm doing any projects around the house. Secondly, I love those wheels, they remind me of the Crager (or however it was spelled) mags that were the coolest things on the road back in the day, chrome wheels were ok, but mags were the real deal. Can't wait to see what this Chevy looks like when you get done doing your magic. Also tell Summit Justin that his doppelganger, who is the son of one of my best friends, lives in Spokane Washington.

[@rhondasweeney7271]

Thank you hillbilly for all the work that you've been doing. Earlier in the video it looked like Demarie wasbored. Awesome video! 😊

[@markszyszkiewicz]

Lol...I saw that too! The "Boss" looking sooo bored.

[@RealSuburbanCowboy]

Tighten bolts with the BOX side of the wrench, not the open side. Better grip. I love this build. Great channel.

[@michaelwpaulin4876]

You all are doing a great job modernizing that 57 Belair... looking foreword to seeing the trip back to your home base.. Justin, Robby, Hillbilly and of course Demri, you guys are really Something... Good Luck on the Trip!!

[@COM70]

0:32 that tackle comment from Hillbilly was so needless, random and absolutely hilarious.😂😂😂 Andy us really taking care of you and making things smoother to install.

[@outlaw26aow61]

The jazz hands at 6:52 was too!😂😂😂

[@detroitdiy]

A 6.2 Hillbilly, just think of the burnouts it will do. Great video guy's, I can't wait to hear it running. That sweet summit exhaust is going to be music to our ears.

[@JT_70]

Armor Shield is the real deal (and the special price is a great deal). I put it on my new Tahoe 4 years ago and have been very pleased with the shine and water repellency thought it would be a good time to reapply.

[@michaelc.3812]

Good job with the descriptions Hillbilly. You’re getting better at describing the work you are doing, and you are demonstrating your experience and expertise.

[@DakotaHarris321]

It's looking amazing. You guys, I watched the engine install last night. The start up sounds great. The rebuild is going so well. So much hard work that will pay off

[@Farm_fab]

Someone put a flare fitting on backwards on that short piece. That's an amazing tool, and wish I had one like it, but ya gotta be smarter than what you're working with. Be careful when put things together, that both pieces are facing the right direction.

[@tjhanlonjr]

Robbie you need to screen print an apron that has hillbilly on it. I would buy one.

[@timvanasen9822]

Hillbilly is a car genius, this build is awesome as I'm a Chevy enthusiast can't wait to see the roadtrip home, then all the chassi & body restoration to make her beautiful on the outside, great video thank's for sharing ❤😎👍

[@kimetherington2252]

The calibration with Summit is what any GM car guy could ever ask for! I just wish you could break the LS engine in there before the 2000 mile journey back home! God speed when that time comes. Til next time, take care, and we'll see you on the next...

[@nikiguymer5840]

I hope they tell us the grand total cost of the SUMMIT parts used here.that L.S looks nice in there!

[@SchysCraftCo.]

Robby and the gang it's really coming together nicely so far. Really cool. Can't wait to see more videos soon my friends. Fab On. Weld On. Keep Making. God bless.

[@dgmills5351]

Amazing how much has been accomplished in a week on this resurrection of a Classic!

[@Big-chub69]

Great Job you guys, this is one of my Favorite cars and I am very impressed with the build.

[@charlesirby9222]

I remember when they introduced this beauty in a commercial on black & white TV ... it was the best looking car of the year!

[@dave5176]

I love cats too!

[@nestrosbistro2245]

Hillbilly….you rock, 👍🏼👍🏼 and y’all have the most entertaining/informative videos.🤓thanks for your time..😎

[@Vegasoutlaw]

Soooooo sick this 57 is coming back to life, keep it up guy's.

[@natewhiting3431]

My favorite build on your channel so far Robby. Cannot wait until you get it back to Utah and are able to start the body work.

[@Austin_Younts]

Hillbilly is amazing 🎉Congratulations on the build y’all! The car is looking better then ever. Can’t wait to see it rolling.

[@davebishop8683]

Awesome! Bumped into you Wednesday. It was good to see you all and the progress of the '57. (Yes - it was good to see Justin also...LOL)

[@kentmckean6795]

When you are working with extra thick oils, just heat the oil in a microwave for 1 or 2 minutes, until it is hot enough to lower its viscosity!

[@Capohanf1]

The year I was born, Dad bought a brand new. white over turquoise blue, 1956 Chevy Belair 4 door that had the gas filler in the fin. I was funny to watch the service station attendants look for where to put the gas in (this was in the day when you did not or in some states COULD not pump your own gas!).

[@peterlindsay2869]

You should’ve put a six speed standard in there. Would’ve been a lot more fun. And you were at that point where you could’ve done anything what a shame. I set up Kreggers would’ve been nice too. Lol

[@jamesdegraff]

“All this room we have for activities”. I love a good movie reference!

[@TheDogLife5225]

What a rare opportunity to do a meet and greet with local fans.. Summit Racing cookout before heading on the road. Make it happen 😊😊😊. Maybe even a knuckle buster road trip. 😊😊😊

[@ronwade2206]

We did this with a 1963 Sedan deVille Cadillac in about 1977... Minus all the money, parts and propper shop tools and environment. We were in my side yard, all dirt, in west Phoenix, in Summer. We made it to Flagstaff. I've never left!

[@jordangryg5442]

if you cut a groove into the screws then spray lube on it let it sit they come out nicely

[@keithhogan6997]

Loved this vid! I just watched the engine install on Summit's channel and it hit me why Justin seems "familiar". In the intro he looks somewhat like and sounds a lot like Ian Johnson from Extreme Off-Road, etc. So much so they could be related. In a way I wish Summit had a lot of these items for the old school (F)SJ Jeeps; it would make my life so much easier! Ah well. I'm really looking forward to the road trek back to Ephraim! Safe travels 😎👍

[@bodeandigs]

Hill Billy may not be the best at delivering his thoughts and actions, but he has more knowledge packed in that brain of his than a brain surgeon does.

[@BFT88]

Yep, for sure.

[@robertgee6750]

The man Hillbilly !!!

[@1950harleycharley]

That’s one of the dumbest statements on KZbin

[@Psalmist374DKR]

His brain is WAY faster than the speaking part can keep up with. But the man's getting more smooth in delivery as he allows himself the time to convey the genius inner workings. True story this man is a treasure.

[@Rusty_ok]

Hillbilly rocks.

[@TxRiderDave]

Hillbilly is getting it done like a chief! Great job by everyone; divide and conquer is the way with so much knowledge, skill and talent on the team.👍

[@dougalexander7204]

After reading the comments there are lots of praise for Hillbilly, and well deserved. Both, Robby and Hillbilly are living a dream with all these Summit parts, and the boss has her team under control. Amazing experience.

[@fishingwithkar4871]

When you get back to your body shop I don't want to see anybody work except for fixing the holes. Clear coat everything else the frame and everything clear-coated. That patina is beautiful.

[@garlandremingtoniii1338]

You guys are without a doubt, Truly amazing!!

[@billwalker5883]

I watched the summit racing episode. It was like watching power Nation. Not used to you being all business. Like cutting the backside of a mullet. Shows how much of a professional you are sir

[@MM-tw6cm]

The engine is so dwarfed in the bay ! I loooove the stance of the car while driving, it could be idling around the corner- but the look - wuh !

[@jeremynelson8496]

The end reminded me of a movie Tommy Boy. "did you eat paint chips as a kid?" lol You guys kicked ass this week.

[@charliebeck1448]

If u got a welder tack a couple plates on to your skids just enough so when they wear u can cut rheum off and add a few new ones if not they won’t last long if the are scuffing the ground

[@arthurdeich5753]

Love your show,I watch all the time,Keep up the good work.

[@mschulz55]

Sure wish I knew when you were rolling thru KC I live a mile off I70 and would love to see the 57 roll by

[@anthonylee2099]

You guys are plugging along. Great work guys! Happy 4th🎉🤙😎

[@deannalemburg10]

Already looks cool 😎 with the wheels on ! Can hardly wait to see it on the road

[@johnstancato8785]

I wish I could have came by summit and said hi to you guys while you were there I only live 20 minutes away

[@keithsprague8519]

I’m so glad that I found @RobbyLayton on KZbin! I enjoy watching your videos! It was when this 1957 Chevy Bel Aire was found in the barn when I started watching you and subscribed to your channel! This build is my dream car! Y’all are completely awesome! Keep up the great work that you do!

[@randyengle7691]

Everyone loves packing bearings! Have you ever tried using a needle fitting on the grease gun?

[@jackfoubert.]

I love the patina on that car, but with your talent I think you should do a nugget type build on that Beauty.

[@mandemsdad817]

Justin? is a riot! It really is amazing how much you can do when you have all the stuff you need right there in the shop.

[@williamphilo7814]

Robby, you can push all the lug studs out; and replace them with the correct size for the rotors.

[@JRs-Garage]

Hopefully you get to stop off at some car shows on the way across the country!

[@craigclark3279]

This is soo cool thank you because it brings back working on the 53 mercury new rings and hand grind the valves.

[@sandyca1106]

IT'S A HISTORICAL MOMENT!!! ... Both Robbie & Hillbilly read instructions!!! LOL LOL

[@509FUN]

This is literally my dream car. Couldn’t imagine getting the chance to cross country road trip it! Wicked cool!

[@shaunparsons9610]

30+ years as a mechanic, I've always used silicone on the diff cover and put gear oil in right away. Never waited and never had any problems

[@luketitchenell1263]

Exactly! So much misinformation in this series, like the engine trans and rear end all being junk. WTH! You were using the clutch to slow the car I believe everything was fine. Body shops shouldn't try to do mechanic work apparently.

[@dennispalmer6007]

@@luketitchenell1263why don’t you tell us how you really feel

[@dave5176]

Let's see. New engine, drive train, suspension, wheels and tires. I wonder if the car can make the 2,000 mile run? Might be kinda sketchy?

[@mikepresley7179]

Could not leave a pic but in Matt’s off-road Vedic he just posted, his customer walks up sporting one of your shirts. Lol

[@bigtsperspective5831]

I’ve been a fan of Automotive tv programming since I was little. I’ve seen a few great hosts an programs …. Robby if you ever have the chance to have your own show bigger then U-toobs , DO IT !

[@saintracheljarodm.holy-kay2560]

Well that's a lot of work, and I did check out summits engine build, sweet😁👍.... and "Mary Belle" is alive, Alive, and what a beautiful sound she makes. Awesome job everyone at Summit and Robby Layton, have a great week and count your blessings amen. 🇺🇸👍😁

[@dreamlinerkoa6438]

Seen. The engine build ,, love it 🎉🎉 😅😅 the LS is going to rattle the rust right off the 57 😂😂 ❤

[@Crewsy]

@12:56 Robby is the first KZbinr to pack bearings by hand the way I was taught in Grade 9 Auto Shop over 40 years ago. Not sure what Hillbilly is doing. 🤣😂

[@thedumbassspeaks]

Justin from Summit is definitely the right assistant for this job! His enthusiasm is fun to watch!

[@UmmmmmmmWhat]

I'd love to see Hillbilly's mind build a ratrod. He basically has an encyclopedia in his head of what random old parts work together even if they probably shouldn't, and an odd sense of "junk style" that make me positive the final results of the build would be epic. The Bronc⭐️ is kinda his offroad ratrod, but i mean something for on road, even if it's a family hauler he'd make it cool.

[@RC.3RD864]

Hillbilly I'm proud of you!!! You're getting A LOT better talking on camera!! Great job

[@LarryYaw]

Summit's video is already up! Don't miss it.

[@wbball15]

11:00 Demri thinking, "I miss my babies. And I'm sooooooooo happy they're not here."

[@128file]

I love your 57 series its been fun watching especially the fact that I live just north of you in Aurora, Ohio and I’m very familiar with Summit racing. It would’ve been fun to have a chance to do a meet and greet with you for the fans here on the east side of the United States.

[@barneyd47]

You can make packing bearings easier by using the wide side to stuff grease in I had a high school mechanics teacher that could pack bearings with one hand

[@JT_70]

That’s how I was taught to do it also when I was an aircraft mechanic. Put a pile of grease in the palm of one hand, put the bearing on the second section of the middle finger of the other hand with the large side of the bearing facing down. Bend the finger and slap the open part of the bearing into the grease repeatedly, pressing the grease into the bearing. Rotate the entire bearing when the grease starts coming out the upper, smaller part of the bearing and continue slapping it into the grease and rotating it until the entire bearing has grease coming out the smaller end. Very quick and easy process.

[@RobbyLayton]

Check out the awesome engine build here over on Summit Racing’s youtube channel make sure to Subscribe let’s get them too 200k kzbin.info/www/bejne/gpaVd3Shg96Abtk&feature=sharec

[@timothysnyder4335]

Make sure to honk and wave when you pass through northern Indiana!

[@jgemmell2823]

Amazing. I thought ALL '57 Chevy's rusted out right above the headlights.

[@MattyPizz0900]

HOT DAMMMM!!!! HILL BILLY KILLING IT!!!!!

[@dougalexander7204]

Matt is in the groove with excitement for the build. I like that.

[@llyodreeves4657]

Keep up the good work love watching you on KZbin

[@2VALVEJAY]

Dude everybody needs a hillbilly lol handy guy to know, love your channel man ive been watching for while now. now i never miss a video.

[@Precisionreelworks]

Hillbilly knows the mechanics code well! "Anything is a hammer if you use it wrong enough. Unless it's a screwdriver, then it's a chisel" Channel locks as hammer and screwdriver as chisel 😂 Side note, this car would be sick as a "bare metal Bel-Air"

[@fredkroldart7859]

No matter who you are no matter what you like be it a Ford a Chevy a Dodge Toyota or Honda it does not matter. This has been extremely impressive. Looking forward to the next video.

[@eck8240]

Summit racing and Robby Layton that's some homerun on the p.r. get some yeah get some

[@davidvanausdle5387]

Hey robby nice job on greasing the bearings next time flip the bearing over your doing it backwards, it works the way you did it but the opening is bigger on the other side.

[@ralphfritzsche2000]

Great job! And a great video series! Looking forward to more!

[@aarone3790]

Awesome video, Happy 4th of July everyone 🦅🇺🇸🦅🎉🎆🎇✨🦅🇺🇸🦅

[@richard3141592638]

And the engine video was yesterday! It was awesome!

[@terencegillespie6675]

For sure Robby doesn’t want to do another Hillbilly Harley routine. The alliance with Summit Racing is awesome. Wonder how he missed Jegs? Can’t wait for the trip….see if the old rust bucket’s frame holds up to all the new power stuff. For sure it’s a RAT ROD.

[@TheOldaz1]

Making good progress guys - interesting watching the mods to the 6.2 as you put it together. Great job Hillbilly.

[@OldRocker181]

Cute putting the steering wheel and shaft in the axle tube 1:35

[@stoneshrink]

Just FYI, per SAE (and FAA) requirement bolt/nut engagement has 3 threads exposed on the outside of the nut. This isn't a rule (unless you're racing) but it's a good guideline to follow when assembling - why 3? because it makes it quite easy to see (on visual inspection) whether or not the nut has backed off when everything is 3 threads.... are you going to get a ticket? no, but is it good practice?... yes.

[@terrynye3995]

Robbie you're over at summit racing working there you should have summit racing come to your shop to help with a little bit of bodywork on that car

[@professornuke7562]

So, they get this machine. Then they fully disassemble it and give it the full body rebuild, including new patch panels and stuff like Paul preempted with the body swap on The Nuggie. This will be worth a million when it's done.

[@donaldgoodrich2493]

That motor and tranny is a thing of beauty!

[@karlhaught8182]

You guys are awesome. Love your Chanel. I'm in Streetsboro Ohio we have a camp sites at tuckaway lake tomorrow night we are having a awesome fireworks show it starts around 8 .it would be awesome to meet you and hillbilly.

[@miltonbayne6649]

Will we get a total parts cost in case someone wanted to know the range it will take to do this kind of project?

[@paulbecker6124]

Robby, when will you be powering your garbage disposal, dishwasher, washer and dryer with an LS? It seems you put an LS in everything. I figure powering home appliances is a natural progression.

[@MisterTAllred]

How tight to make the nuts and bolts? Usually do 1/4 turn before they break! :)

[@markszyszkiewicz]

That clip of Justin being the engine at the end...😂😂😂

[@jamesdavid5997]

I have been anticipating this build since the first vid about it hit.... Awesome