Will COLD GLUE FIX this DENT? | 5 Minute PDR Tutorial!

You looking for a quick dent tutorial on KZbin to fix your car? Today I am using a product called glexo cold glue and PDR better known as Paintless Dent Repair. The damage is on the trunk lid of a Toyota Camry caused by a low impact collision. The dent covers a 12 inch section. Will this sticky cold glue get the job done?
Training Email Me
tinyurl.com/36...
PDR Training secretpdrpaintl...
Collision Tools
pdr-training-t...
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-...
/ dentdiscountmobile
dentdiscountmo...
www.yelp.com/b...
www.yelp.com/b...
reviews.birdey...
www.manta.com/...
dent-discount-...
www.yellowpage...
www.angieslist...

[@DentDiscountPDRBodyShop]

PDR Training Message Me Here! www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/

[@victorbarranca2910]

Real nice, love to see stuff like this, you keep it real without trying to sell tools like some others out there. Thanks for sharing.

[@DentDiscountPDRBodyShop]

I have noticed that as well.. thank you for your comments I really appreciate it.

[@Mark-jc1bu]

Beautiful work

[@DentDiscountPDRBodyShop]

Mark thank you I really appreciate your comments

[@aarontyrrell2931]

Nice repair brother, also like the measuring tape in the shot to ref dent size!! Keep em coming

[@DentDiscountPDRBodyShop]

I’m hoping to have my new video out this coming Sunday

[@sunnySingh-ch5ci]

Wow Ken, Amazing work the Before and after is simply unreal, I was sure you had to replace the trunk... great video

[@DentDiscountPDRBodyShop]

Thank you Sunny!! Great comment I appreciate that.

[@ricucioeugen]

You are a man of steel! You could fix that with a small hammer and a screwdriver! 😍

[@DentDiscountPDRBodyShop]

Yes I can..I have done that screw driver trick.

[@Mark-jc1bu]

Yes

[@adancontreras9834]

Great job ! 👍👍

[@DentDiscountPDRBodyShop]

Thank you for your comment I appreciate it..

[@jimself8762]

I'm watching all these videos and thinking "I could learn this!" You make it look so easy! Got any videos from your competitions?

[@DentDiscountPDRBodyShop]

Thank you Jim..I’m kinda new to the videos. I will be doing more video recording of my activities. Thank you for your comment.

[@marknoble5495]

When you have a lot of black residue on the panel from the glue, a good tip is don’t try and clean it off with a rag or alcohol, but use the cold glue tab to get the bulk of it off, then it’s easier to clean.

[@DentDiscountPDRBodyShop]

Thank you Mark

[@marknoble5495]

@@DentDiscountPDRBodyShop love your videos. A friend of mine and myself quit chasing hail about 8 years ago and began working locally on bigger and nastier stuff. Always looking for ways to do it faster and cleaner and have incorporated several things from your channel that have helped. Thanks 🙏

[@franciscoramos226]

Great job and info video, Ken. I think cold glue is a must have for all PDR Techs 👏👏👍

[@DentDiscountPDRBodyShop]

I agree Francisco 100% i’m sure as time goes on they will come out with stronger formulas as well.

[@fyitube1219]

Great job man. That’s in a tough spot..I want more videos.

[@DentDiscountPDRBodyShop]

Thank you FYI!!

[@inversioneselexodo2360]

Hello sir, could you indicate in each repair how long it takes to finish it and how much does it charge? I am from Guatemala. Ruben Ibañez. Thank you for your videos....👍

[@DentDiscountPDRBodyShop]

This on took 4hours.. if I explained everything in the video I would not get comments. Thank you so much for your comment I really appreciate it

[@BilalBilal-gy6dg]

Good job Clark. Is Glexo cold glue stronger than a hot glue?

[@DentDiscountPDRBodyShop]

Hot glue is a much stronger pull.. Cold glue is great if the dents not too deep for a quick release. Thank you for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@robertturner-il7oj]

Can you use plastic tabs with cold glue; need only metal tabs?

[@congluong5495]

Very nice

[@DentDiscountPDRBodyShop]

Thank you Cong for your comment I appreciate it..Clark Ken secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@8MWm3e4b]

Very good work! On this occasion, I would like to ask the author how many degrees we can heat the sheet metal with a hair dryer

[@DentDiscountPDRBodyShop]

You can go up 150’ you can park the vehicle directly in the sun and the temperature from the sun would be good enough in most cases

[@8MWm3e4b]

@@DentDiscountPDRBodyShop Thanks! I’m going to the Sahara right tomorrow morning haha

[@c10_steve61]

New subscriber... is there a particular video I can watch that will get me started in “hobbyist” PDR? Fix a few dents on my personal vehicles. Thank you 🙏

[@DentDiscountPDRBodyShop]

Steve welcome to my channel thank you for subscribing

[@LuisHernandez-bz5en]

👍 you make it easy awesome great job 👍

[@DentDiscountPDRBodyShop]

Thank you LUIS I appreciate your comment..

[@vidicz]

Nice repair 👍💪🏼

[@DentDiscountPDRBodyShop]

Yo what’s up Zan!! How’s it going over there? Are going to any of the MTEs this year? Thank you for your comment.

[@vidicz]

Dent Discount - Online PDR Training I was in Orlando. I will most likely skip the Vegas one this year. But will be in Orlando next year for sure. And you?

[@DentDiscountPDRBodyShop]

I haven’t gone to Orlando for about 4 years. It is a much further trip than Vegas. Vegas is relatively new I’m going to try to go there this year for the first time. I can drive there it’s about an 8 hour trip or I can fly 1.5 hour flight. If I drive it’ll be easier to bring home the tools. Plus I haven’t hung out in Vegas for probably about 10 years I’m long overdue.

[@dsppdr4302]

Googwork ken

[@DentDiscountPDRBodyShop]

Thank you

[@kendent1]

New subscribers great work impressive

[@DentDiscountPDRBodyShop]

Welcome aboard Kenneth. Thank you I appreciate that. Clark Ken a.k.a. Man of Steel secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@rebootmoto]

Love what you do brother, do you guys offer apprenticeships or something, it's a damn art! I'd love to get into this

[@DentDiscountPDRBodyShop]

Thank I appreciate that. I do offer training. Keep me posted..

[@franciscojoserodrigues2694]

Mano vc é fera

[@DentDiscountPDRBodyShop]

Thank you Francisco for your comment. Clark Ken a.k.a. Man of Steel secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/

[@williamscoggin1509]

👍🏻👍🏻

[@muslimdolgov1516]

Ты super...pdr

[@DentDiscountPDRBodyShop]

Thank you my Friend!!

[@wadebaskin7085]

Bad to the bone man keep it up love your work

[@DentDiscountPDRBodyShop]

Thank you Wade appreciate your comment..

[@علیرضاکریمی-ص5ك]

❤

[@johnphillips1345]

Do you prefer cold or hot clue?...

[@johnphillips1345]

Glue .. dam auto correct...

[@DentDiscountPDRBodyShop]

Hot glue is stronger pull

[@chrifbahar1641]

How to make cold glue!

[@DentDiscountPDRBodyShop]

you can buy it

[@carldodge8294]

did u get $500 for the repair?

[@DentDiscountPDRBodyShop]

Carl thank you for the comment I actually got a little more

[@biblefitness]

Great work!

[@DentDiscountPDRBodyShop]

Thank you Leslie!!