Laterally POPPING OUT Dents! | Done Same Day!

Today in San Jose California I'm using PDR and collision procedures to remove a dent from a Toyota Camry. Repairing a panel with lateral pulling tabs to save the customer money and reporting a claim on his insurance. The dent done the same day.
Training Email Me
tinyurl.com/36...
PDR Training secretpdrpaintl...
Collision Tools
pdr-training-t...
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-...
dentdiscountmo...
www.yelp.com/b...
www.yelp.com/b...

[@BuddysDIY]

I could watch this video 100 times and have all those tool snap still not get anywhere close to that result. This takes a VERY skilled eye to know the angles to pull, how hard to pull, where to hammer, ect, ect. Extremely skilled art here. You can tell this dude has been doing this for a very long time.

[@shanepowers7566]

The Swiss watch makers of the bodyshop world.

[@mashamambea5704]

it's a hoax sheet metal does not shrink without extreme heat this guy is playing you his just out to sell tools that even if u buy, u cannot achieve that level of perfection.

[@kusterflattail]

😭​@@mashamambea5704

[@sleibson]

This shop is a couple of miles from me and I've used it twice. Both times produced good results. There's this pesky pillar in my condo's parking garage. Anyway, what a surprise and joy to see this on KZbin. He really is that good. Take it from a customer.

[@Jram-cv8yb]

I've been doing pdr since the early 90s and I've NEVER seed a master like you. You have mad skills my friend.

[@OkammakO]

Really good body workers are honestly like magicians.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@novinnovations4026]

I could've painted a new fender and blended the door multiple times in the time this job took. Still incredible to see dents manipulated by hand and the end result speaks for itself. Impressive sir.

[@greengoat5654]

That is just the paint though, the dents are going to have to come out either way

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@gustavcrossbow2805]

@@greengoat5654 dood body men. buy new parts lollll

[@rusty911s2]

Yeah, but now you've got a paint system that is different from factory. You may have to blend into the bonnet or risk a mismatch. You've also got to remove door top trim (with risk of rippling it) and handle (or mask around and have lacquer peel later) and soft mask the lacquer all around the door. You've also got to rust protect the inside of the wing and align for all gaps. Then in three years time your paint blend will start to show because refinishing paints are literally a different product to production paint. Then you've got the cost of the wing (assuming it's available), time off road, energy costs for your oven and environmental costs. Most of all, the value of the car after this sort of PDR to this quality is completely as it was the minute before the accident. A multiple painted car is never as nice and therefore never worth as much as something with 100% factory paint.

[@Garage48-Andrei]

Super result. How is this even possible to repair ??? I am shocked by the result of the work!!! You are a super master... I'll never be like that. Thanks for the repair reviews. I watch and learn. 👏👏👏

[@DentDiscountPDRBodyShop]

Thank you

[@sourwords1808]

No doubt this is mostly skill, but having the right tools is what it's all about. 👍

[@woodennecktie]

such wise words , you should buy a steinway grand piano , obvious you can play like a master

[@Skilllie]

All said and done, most of the tools on display here are his own builds.......ll

[@raybbaby]

This dude can "read" the twisted metal like I would read "Fun with Dick and Jane". 🤓

[@1st_track_dents]

Great work Clark! glad to see you are still smashing those dents out of the park, no dent has a chance going up against your skills. 💪👊

[@DentDiscountPDRBodyShop]

Thank you Jake for stopping by I appreciate all your comments. How’s the dent business going on your side of the planet?

[@1st_track_dents]

@@DentDiscountPDRBodyShop Unfortunately I've been unwell since Dec 2020 but hopefully now back on the mend, most of my customers are prepared to wait for me, so I think I will be pretty busy when I get back! All the best, you are doing some amazing work that is very entertaining to watch. Keep safe 😉

[@DentDiscountPDRBodyShop]

Wow my friend!! I’m glad to hear you’re back on the road to healing up. I’m 52 I’m paying closer attention to my stress and eating habits. I am big on the placebo effect how you can trick your body into health. You take good care stay in touch.

[@hermanqueen9314]

9

[@1st_track_dents]

@@DentDiscountPDRBodyShop Yes, you look after yourself, this trade certainly takes it out on your body. Looking forward to watching your next challenge, catch up soon! 😉👊

[@raybbaby]

I'm not even a dent remover type dude, but I love watching these videos. Always shocked at how good his results are.

[@robertreavley7145]

You been gone a while! It’s great to see you back! Blown away by this one ☝️ yet again you have accomplished a level of PDR that others wouldn’t touch! Class!!

[@DentDiscountPDRBodyShop]

Thank you I really appreciate that

[@iamsam8446]

This is awesome. PDR can be hit or miss, in terms of price and skill. This guy takes his time to get great results. This takes a lot more skill than just to replace the panel and repaint. Might even be able to airbrush the remaining paint scuffs.

[@catolicomochaorejas9073]

Dude the paint came off on the fender so they need to paint the door fender hood so can match the color is Pearl

[@polytzai]

I can't believe the result!!!👏🏻 Amazing and skilled work!

[@pcm7315]

Even if I had all those tools, couldn't get the result of this master - not even close.

[@mashamambea5704]

It's a hoax sheet metal stretches on impact without heat it can never shrink back.

[@billd.6847]

@@pcm7315 I agree, I couldn't either. Ken is the Picasso of PDR.

[@cubleycat]

I love that you are helping to save the planet by not fitting a new panel, not using paint and other things. Its just your skill and time and some glue. This is a fantastic method.

[@DentDiscountPDRBodyShop]

Thank you

[@AnthonyVeith]

Awesome , missed you brother , welcome back

[@DentDiscountPDRBodyShop]

Missed you to my friend. Thank you for your comment

[@godwinogbidi564]

@@DentDiscountPDRBodyShop How can one get these tools to buy?

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com The tools are on my website Thank you for subscribing I appreciate your comment

[@DanielReyes-zg8tc]

Really professional advice and I will say don't do it by yourself if you don't understand this video but if you pay attention you can do it by yourself and be safe

[@jamesmichael3998]

That was a nice job you did, I'm just getting into this art, I was recently introduced to it and I was amazed by all the different techniques there are I'm lucky to have an old car here to make dents and practice on, it's amazing. Keep your crowns down and the lights on. Cheers from Jacksonville Florida 🌞

[@DentDiscountPDRBodyShop]

Right on James thank you for your comment

[@FORDST.FAMILIA]

"I'm placing one hand on the handle and the other close to the tip.Leading, guiding the tip on every remaining low spot" - legendary words by the man of steel.

[@evadmc9465]

You’re a master of the trade. Very impressive to watch 👍

[@AO-bz6zc]

I run a fleet of cars on Turo and Getaround. I have been watching your videos and repairing the dents on all of my cars by myself lately. I'm not doing a very good job to be honest. But every time I do a better job than last time. I hope to be able to do it as good as you 1 day. Thanks for your videos.

[@DentDiscountPDRBodyShop]

Your welcome

[@NoxNoctisUmbra]

That voice: "Welcome to America's most wanted."

[@trentbain4988]

BRAVO, BRAVO, as usual totally awesome work. Perfection at it" s finest.

[@weirdmatter]

This is really amazing work, saving materials in the process. I enjoyed the video!

[@olliepearson677]

I have been in body shop for 5 years now I can't wait to get in to dent pulling I love it

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@ihakabrown1326]

Great to see you fit and well, been missing your awesome videos 👍😎🤘

[@DentDiscountPDRBodyShop]

Thank you my friend I really appreciate that

[@HingleMacCringleberry]

Every time I see your dent challenges i think there is no way. You impress by fixing the mess every time in the end.

[@THORE_custom_paint]

Wow! I'm a body tech over in North Carolina, and watching you work really has me itching to stock up on pdr tools and chase that paper! Keep up the good work 💪🏻

[@carpballet]

“Chase that paper?”

[@gergnotsloh]

@@carpballet Money is made out of paper.

[@shanellerosado63]

I’m in North Carolina can u fix mines ?

[@edmundoalvarezvaldez]

Definitely a great job, Marstro, I follow you from Hermosillo, Sonora, Mexico, I also do work here, and we never stop learning, ... congratulations! a hug 🤗

[@codyhailes8733]

Insane!! This is a true art!!!

[@codyhailes8733]

@Ezell Broome wtf are you talking about?!?

[@waynekinder971]

I am 73 years old and need to make a extra income. I have really enjoyed your programs.

[@DentDiscountPDRBodyShop]

Thank you Wayne for your comment

[@31000Saulo]

Esse metal é alumínio ? Parabéns pelo trabalho 👏👏 excelente ✨

[@xgearheart8592]

Tools. Patience. Experience. Artist. In the order of difficulty.

[@edmundoalvarezvaldez]

Very great work, congratulations Master!!

[@Pendaws]

Bloody brilliant job mate, there would be heaps of panel beaters watching.

[@RubenQuezadaJrAutoRepair]

Always wondered how that was done without any body filler ,primer,paint...

[@lukewarm2075]

It's definitely a skill not everyone can learn great work.

[@anderson-if2dm]

Sem palavras.vc está de parabéns!👏

[@mditani]

As evry one said I'll replace the wing straight away 😅. Your skill amazing well done you deserve 5 golden ⭐⭐⭐⭐⭐👌

[@DentDiscountPDRBodyShop]

Thank you for your comment I really appreciate it. Lots of golden stars very nice

[@carlosvieira9462]

Trabalho espetacular. Está de parabéns. Muito bom. 👍🏾👊🏾

[@miguelcastaneda7236]

Fyi out there if you see a event or go online...porsche...or bmw clubs...paintless dent removal guys are always there...and working..all regions

[@dharmenkumar9323]

You do have amazing skills and the turn out is excellent. I have been doing automotive painting from 10 years would replace this fender.Thank you. Is there any way to learn it from you please .Dharmend here all the from New zealand.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com If you like to learn send me a message. I appreciate your comment and question

[@tylerjunior7660]

@@DentDiscountPDRBodyShop I would like to learn and fix my bent fender I love watching your videos it so satisfying

[@livelife8480]

If I can't do it buy watching your videos I'll message you

[@-Nathan87-]

The minute that paint was compromised well it will end the same way forever compromised

[@chip_stack]

@@-Nathan87- especially if you live in a winter place where salt roads it's going to rust in a few years

[@theiceageiscoming.5516]

I love these videos. You are by far the best PDR guy on KZbin. I can fix some pretty bad damage, but nothing like you can. 💪😎🇺🇲

[@DentDiscountPDRBodyShop]

Thank you Ice Age I really appreciate that

[@camryman601]

Man you’re work is awesome! I subscribed about a week ago and I’m hooked to your videos. I want to make a business out of this. I just bought some tools and I’m gonna start practicing on my personal cars and friends and families cars that are willing to let me experiment. I’ve been in the automotive mechanical repair field for quite some time but it’s not really doing it for me anymore. I’m ASE certified and completely self taught, my question for you is, should I seek out training or just get straight to it and start honing in my skill? If you do recommend training could you recommend a good program or school? Thanks man keep up the good work!!

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com If you like one on one training send me an email Thank you for subscribing I appreciate your comment

[@norisnunda1044]

Am very happy to be on your teaching site,man of steel you really a genius sir

[@DentDiscountPDRBodyShop]

Thank you Noris

[@vadvalee]

Красавчик 💪

[@jwcash6058]

Been watching you for a year learned so much thank you so much!

[@qwertyui90qwertyui90]

the car is made from aluminium foil and plastic.... can't do that with my steel car haha

[@immanueldelcastillo6041]

This is a skill that requires talent. Good job. 👍

[@hichamlynx4545]

👍👍👍👍👍

[@AbdulHafeezs]

Man of steel.... Your skills are amazing. Great job... Great video and obviously details discussed in video. Thumbs up

[@alextripp1230]

Brilliant to watch, nasty dent which normally would have been a wing replacement. Excellent skill you have, fantastic result, great video, Alex.

[@DentDiscountPDRBodyShop]

Thank you Alex for your comment

[@shannonstiles8751]

It's like watching Bob Ross for me. I can't take my eyes off and am amazed at what you can do with the dents... Thanks

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@straightlines7432]

Nice . I find most PDR guys won't attempt anything like that . They cherry pick dents. I choose more difficult stuff. Nice work man of steel

[@cyc25ruffneck]

Amazing work! Thats true craftsmanship there, and it seems to be a dying art. Most shops around here would have replaced the panel and not even tried to fix the dent. You're a magician!

[@billcui7827]

nice to c u come back. another wonderful job.

[@draganjovanovic7698]

Thank you for all! There is many thinks to learn.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@jeremyjordan8150]

Is laying down nicely on the upper section of the dip

[@kboyrob46]

I do auto body repair but I've been getting into these Paintless Dent repairs with glue tabs so I am a new subscriber

[@DentDiscountPDRBodyShop]

Welcome to my channel thank you for subscribing

[@robertvelasquez363]

Hi there I've been a panel beater for more than 20 years and that would of been a new panel all day, I'm amazed that you got the damage out that good without the paint cracking well done on your skills takes a lot of patience

[@robertvelasquez363]

@Ezell Broome you have the wrong person

[@MuhammadJunaid-qr8wc]

Amazing work dude. I appreciate you for your work.

[@rallyekev]

Incredible work there, amazing skill and so much better than replacing/painting.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@kouki1131]

Sir you're an artist , you really love your work , that's why the results speaks it self thaks for the knowledge you share and the tutorials good luck

[@DentDiscountPDRBodyShop]

Thank you

[@luigismushrooms5701]

This was great, not only did it teach but I could watch it in 2x speed and it was normal pace lol

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@buildingsolutions2874]

i have watched a few of your videos now. REALLY IMPRESSED with the quality of the repair and your work. its really good.

[@greatdaneacdc]

Great Work! I’ve been a Bodyman/Painter since 1980 ! And to think the Bondo and puddy I could have saved using this method! 🇨🇦👍

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@donclifton4262]

Great job! It's amazing the amount of steps that were cut out on that repair. Just cost of the calibration on the front camera if the front bumper came off, the r&I functions, the fender cost, paint and blend time on the tri-coat, etc. I hope you made that money!

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@adammcsorley3801]

Alway a pleasure to watch a skilled craftsman. Cheers.

[@DentDiscountPDRBodyShop]

Adam thank you for your comment

[@princemiza650]

This guy is one of the best for sure

[@hid3nax]

Man with steel biceps and balls. Good result.

[@michaelgamba369]

Great work. but unless this only takes 12minutes in reality to make it look this good. I feel like it's still way easier to replace a repainted fender then do all this but that's ok because I still live in the stone age. But you did a hell a of a job I'm just saying a respray and replace is easier for me. This dude is an absolute pro. Hes the man of steel I wanna be the man of recycled steel

[@David-fj5lz]

It’s staggering how you manage to do this with minimal paint damage

[@melrichardson2392]

Absolutely beautiful work a true craftsman thankyou I hope you are well compensated

[@DentDiscountPDRBodyShop]

Thank you Mel for your comment

[@louielou8262]

WOW! We not Not witnessing a master at work, But "The Master at Work"🙌🏼🍻👍🏼

[@DentDiscountPDRBodyShop]

Thank you for your comment I really appreciate it

[@jry.....why.1605]

Magical hand ✋,.. you're the best on THIS work,..you should awarded the best workshop car in the world 👍💯.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@mikemasterson5437]

I have a buddy, Bruce Kelly that does this and other paintless dent removal. Awesome stuff!

[@hussainbanbali]

Thanks for sharing your experience with us and the for nice video there was a lot of useful information, highly appreciate it

[@DentDiscountPDRBodyShop]

Right on my friend thank you for your comment

[@jacksampson7711]

Wow!!! Wish you were in Miami FL. I have a tiny crease in my door that is 10% of what you are showing and I got quotes for $500!!!

[@dekonfrost7]

Your voice and manner makes me wanna jump off a bridge. But i have seen you do this that if i had not seen for myself i would have called you a liar. You changed my thinking and raised my skill. Instead of a stud gun the hot glue has been a game changer for me. Good work

[@amalfi460]

You’re an artist nice work brother

[@DentDiscountPDRBodyShop]

Thank you for your comment Neil

[@slingshot1961]

Your amazing man. You could give me the tools, but I would never have your skill. Please keep the videos coming.

[@DentDiscountPDRBodyShop]

True!! Thank you for your comment

[@rogerjoseph2532]

welcome back bud. Love your vids

[@DentDiscountPDRBodyShop]

Thank you I appreciate that

[@shannonstiles9838]

That’s amazing results

[@routtookc8064]

you show exactly what you did, but that is still like magic

[@lucians9083]

Just had a dent fixed on my car and this video came up in my recommended. Awesome to see how you do this and had to subscribe!

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@davidmays3333]

You are very talented!!! Great job

[@ViktorSokolyuk]

You are a very talented man. Thank you for sharing.

[@alexandrgrodno9084]

Long hard work,awesome result.

[@freddycugarjr]

You are amazing man of steel aka Magneto!

[@ScrubbinLyfe]

new sub, PDR is some amazing art. Nothing like DR in the ABR side; and a lot less heavy handed.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment scrubbinlyfe

[@dlwood7777]

That was pretty impressive

[@benvenegas8708]

Man you make it look easy...that is talent... beautiful work

[@DentDiscountPDRBodyShop]

Thank you Ben

[@davidparker9676]

You have a gift when it comes to PDR. Well done Sir!

[@DentDiscountPDRBodyShop]

Thank you David I really appreciate it

[@venp4353]

This still amazes me.

[@collisionglue2564]

Man of Steel at it again! Loving it bro!

[@DentDiscountPDRBodyShop]

Thank you Jeremy I really appreciate all your comments.

[@ramonangelolea3590]

gran maestro , admiro su trabajo y gran capacidad para realizar los trabajos , ,,, felicidades maestro ..

[@fyitube1219]

ripping on the bodyline great job Man of Steel !

[@sadfrxsty8347]

i’m 17 in high school and just rebuilt the front end of my car after an accident doing all the body work myself this is pretty cool

[@DentDiscountPDRBodyShop]

Right on my friend sounds like you have some skill

[@chuckwhitson654]

With a lifetime of traditional body shop experience, I'd have said no dang way to pdr that wicked crease. Killing it bro

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@Karopine]

First time I seen this done. Didn't know this was even an option that you can literally buff that out later:). Impressive mate. Liked and subscribed

[@DentDiscountPDRBodyShop]

Welcome to my channel thank you for subscribing

[@LSXMILLER]

Lol you make it look fun I got to the point where I can't stand it 😂

[@natural_nc7230]

I'll tell you what they keep telling me, "Keep pushing". I got a f 150 aluminum hood that I would like to blow up with dynamite. I've kept pushing and pulling and it is getting better.

[@MEss-cl1do]

Hello man of steel, man t'ai vraiment a la hauteur de ta réputation 👍👊✌️victoire

[@manuelc.8027]

I enjoy watching your videos and eventually hope to learn PDR

[@DentDiscountPDRBodyShop]

Thank you for your comment