Will Curing Loctite for 1-Year Make a Difference?

[@HacksbyDad]

Check out all of my Nuts and Bolts videos in this playlist... kzbin.info/aero/PL_WcGw5s6Cq6YK_s-NNne1838j25ijmii 👍😎

[@RPRosen-ki2fk]

Mad props on your video. I loved your science/math testing methods and your use of on screen graphics/charts that could be paused to be studied by the viewer. AWESOME work dude, people like you are what made KZbin great.

[@HacksbyDad]

Thank you for the kind words! I appreciate the support. 👍😎

[@timberhitchllc]

Threadlocker manufacturers should be paying you to do this work for them, and the results you found should be published in technical manuals around the world!

[@HacksbyDad]

Thanks! Published in tech manuals is a streeeeetch. LOL. 😎

[@mikelgeren149]

They work ! Used them on Harley Davidson motorcycles fifty years ago ( known then as Milwaukee Vibrators ) . 👍👍👍👍👍👍👍👍👍👍

[@HacksbyDad]

LOL! Thanks! 😎

[@achecase]

Short but sweet.

[@HacksbyDad]

Thanks! 😎

[@PerformanceFestiva]

I wonder if these results may be affected by loose tolerances with these fasteners. I can visually see variations by eye, so I would assume there would also be slight size variations. Thank you for making these videos.

[@demivik5812]

seems like red started to degrade after 6 months damn, it needs 18 or even 24 month testing man, you hard waiting for a year for this

[@HacksbyDad]

18 or 24 months? 🤔. I just may do that. LOL. 😎

[@BillySBC]

I would compare the torque values of Loctite to Nail Polish and Super Glue and both types of JB Weld.

[@troyfrei2962]

Have you tried Super Glue?

[@HacksbyDad]

Sort of. I tested super glue in this impact and vibration video... kzbin.info/www/bejne/oqjXhop4Z7l8j6M 😎

[@troyfrei2962]

@@HacksbyDad Thank you very much . I did watch the video!! Thanks again for making your videos. Hey have you tried hydraulic loctite?

[@HacksbyDad]

@@troyfrei2962 Hydraulic loctite? What's it used for? I'm guessing threaded fittings on hydraulic systems.

[@troyfrei2962]

@@HacksbyDad The time I used it was on a hydraulic pump line. The hydraulic had a filter that needed to be replaced ~3 years. I put ALOT on the thread. Over tightening Hose bolts with the hydraulic Loctite, 3 years later I had to take a breaker bar to take it off. I'm not what the # was but it was dark Blue.

[@HacksbyDad]

@@troyfrei2962 👍😎

[@-COBRA]

what other glues are good alternatives for these? These are really expansive in my country.

[@HacksbyDad]

Hi. There's Permatex, Vibratite, and Dap to name few. 😎

[@trench01]

maybe use a cheaper alternative to use hydrogen peroxide, vinegar or salt water to rust it then it will be suck for good LOL

[@HacksbyDad]

Thanks. I wasn't looking to bond them for life, but will keep your suggestion in mind if I ever do. 😎