Will He Crash First 3D Acrobatic RC Plane?!?! - H-King Voltigeur - TheRcSaylors

  Рет қаралды 40,302

TheRcSaylors

TheRcSaylors

4 жыл бұрын

Buy this 3d acrobatic rc plane here: amzn.to/2OKAgIR
This is Nate's very first 3D plane ever and with only an hour or so of practice on a flight simulator, it is time to test the H-King Voltigeur in real life.
Buy this 3d acrobatic rc plane here: amzn.to/2OKAgIR
Transmitter/Receiver used in video: amzn.to/35AvsvY
3s battery used in video: amzn.to/2MEIAap
4s battery we will use after experience: amzn.to/2IPni8W
Charger: amzn.to/35pvG8S
Lipo Alarm: amzn.to/2MaYM4g
Check out the best beginner rc plane here: bit.ly/2M8AcAY
Support TheRcSaylors
Patreon & Stickers | / thercsaylors
Ebay | goo.gl/xUh1KM
Merch | www.thercsaylorsyt.com/shirts
Mail | 1140 Carter Ave, P.O. Box 361, Ashland, Kentucky 41101
Social Media
Facebook | / thercsaylors
Instagram | / thercsaylors
Twitter | / thercsaylors
Vlog Channel | / thesaylorsytchannel
SPECIAL THANKS TO OUR PATREON FAMILY!!
Chuck R, Lyle G Kehrer, Ryan Alexander, Gary Zion, Chris Hamlett, Richard Higginson, Ian Coulson, Richard Bereczky, Jack Richardson, Bryan Tyson, Anders Olsen, john salt, Dan Conroy, David Chenzoff, Flosiin, Brandon Tibbetts, Banks McDade, Ron Erickson, Mark Thibodeaux, Terry Kellogg, Jesper Larsen, Michel J. Gaudet, Alan Savage, Matthias, Gary Burt, Michael Califf Sr, Joseph Schauber, Pete Schmitt, Haar Bear, Robert Hipp, walter stimax, Raymond Hausele, Priyan, michael baney
#rcplane #airplane #rc

Пікірлер: 252
@TheRcSaylors
@TheRcSaylors 4 жыл бұрын
Buy this 3d acrobatic rc plane here: amzn.to/2OKAgIR Transmitter/Receiver used in video: amzn.to/35AvsvY 3s battery used in video: amzn.to/2MEIAap 4s battery we will use after experience: amzn.to/2IPni8W Charger: amzn.to/35pvG8S Lipo Alarm: amzn.to/2MaYM4g
@magia5035
@magia5035 4 жыл бұрын
Can you install a go pro on the tip of that plane? Or would it disrupt flight?
@Wrayhealth
@Wrayhealth 4 жыл бұрын
Love you channel !!!!!Turn your expo up to 60%
@jaredrohde6612
@jaredrohde6612 4 жыл бұрын
Nate you da man!!
@minimotoadventures867
@minimotoadventures867 4 жыл бұрын
My brother started me in rc planes when I was five. Fast forward to now I am 43 and have started and stopped more than I can count. Learned 3d iMac and mini iMac aerobatics 10 years ago. Love it. You sir are a natural and I wish I could come fly with you. Congratulations.
@poppopscarvinshop
@poppopscarvinshop 4 жыл бұрын
Hey Nate! As Large as the Control Surfaces are, and as Much Throw as They Have, You Are Doing Fantastic! If it was me, I would Dial Down Those Throws and Burn Several Battery Packs Just Getting Used to The Airplane & How She Handles. Then, Crank The Throws Up and Do Lots & Lots of Loops. Loops of ALL Different Sizes & Speeds. Most of All - Relax and Have Lots of Fun! Remember, It's Just Foam! Have Fun, Then Teach Us How To Do It! Repetition Wins.
@BigAlFPV17
@BigAlFPV17 4 жыл бұрын
Fantastic flying Nate!! With so much stick time you have, you'll have it mastered in no time. Excellent video!!
@mountaindewdude76
@mountaindewdude76 4 жыл бұрын
That looked like a lot of fun for you, Nate! Really well done! I dont own that plane but ive flown it before and, even on 3S, its a blast to fly. Keep on having fun, Saylors!
@benjaminviola1879
@benjaminviola1879 4 жыл бұрын
Very interesting to watch! Good job guys! Love the content and I have been a fan for several months now! Keep it up 😊
@Shortsircut1
@Shortsircut1 4 жыл бұрын
Great job Nate, better than my first time at 3D and I love the plane! Additionally I keep forgetting to say, awesome new outro !!!
@66rickf
@66rickf 4 жыл бұрын
Nate, Excellent first flight of a 3D plane - it's only up from here.
@NicksWhipShop
@NicksWhipShop 4 жыл бұрын
Welcome to the world of 3D, brother! It's always a joy to see someone fly a 3D plane for the first time, and it looks like you're having a blast. I just found your channel and you now have a new subscriber.
@OutdoorswithMarkDale
@OutdoorswithMarkDale 4 жыл бұрын
Great job on the maiden flight! I think the Saylors sticker saved you on that low pass!!!!! That is a crazy plane even on 3s, can't imagine what it will do on a 4. The wind made it much harder for you, you got this, just need to teach us the tricks as you learn them. Oh and Abby, Byyyeeee!
@rickmcdole2389
@rickmcdole2389 4 жыл бұрын
That was super impressive for a first time 3D pilot! I fly with some guys whose 3D skills range form semi-ok to fantastic. Most everything you did has a name!
@tomanderson9979
@tomanderson9979 3 жыл бұрын
Very nice Nate. It looked like a lot of fun, keep it coming.
@kevintrappen8007
@kevintrappen8007 4 жыл бұрын
Crazy wild maiden flite! Great job Nate! Awesome video work Abby!
@kjhendricks55
@kjhendricks55 4 жыл бұрын
Way to go Nate. Mad props buddy. So exciting to watch. Great recover within 2 feet of the ground. I can't wait for the next video.
@DamazingT587
@DamazingT587 4 жыл бұрын
Great flight Nate. I enjoyed the video 👍
@highskyes7299
@highskyes7299 4 жыл бұрын
Nice flying Nathan and a nice plane to fly ,can't wait untill the next video and more tricks .
@ant-man1131
@ant-man1131 4 жыл бұрын
Aweson job hovering!!!! You did great!!!!! Love the channel!!!!!
@JakesFamilyRC
@JakesFamilyRC 4 жыл бұрын
Great flight!! I really enjoy watching you learn and experience new things in the hobby!
@TheTootie52
@TheTootie52 4 жыл бұрын
WHOA!! What a VERTICALLY AWESOME show!! I'm so happy that you're so happy, Nate!! That plane is something!! Btw, what is a 3D plane?? Is that how it's made...😕 duh!! Thanks Saylors for quite the experience!! 💟👍😘
@ericbrooks1562
@ericbrooks1562 4 жыл бұрын
Looked really good to me. We learn by doing. Thank you guys for all you do.👍
@cicco1838
@cicco1838 4 жыл бұрын
Awesome bro thank you guys for videossssss...
@haarbear1
@haarbear1 4 жыл бұрын
That was awesome, Nate! Great job!
@jamesshaw89
@jamesshaw89 Жыл бұрын
You two are awesome I've been chain watching your videos for days... I'm going to use your Amazon link I hope it credits you guys? Love the slo-mo clips those are really neat to watch.
@mtnmyke
@mtnmyke 3 жыл бұрын
I put a 3548 800kv motor with a 13x4 prop, 60a esc, 4s, on mine! It rips through any 3d maneuver you can throw at it. I felt it was too sluggish with the stock setup. 3s was sad and I was really pushing the stock electronics running 4s. Keep that in mind as you progress. Also, you can move the CG way further back than the battery tray allows. There are a ton of mods for this online. I think it's a great plane for the price and even better with the upgrades.
@joshcooper130
@joshcooper130 4 жыл бұрын
Excellent flying! Welcome to the 3D world! 😎👍😁
@FirstbornTreweek
@FirstbornTreweek 4 жыл бұрын
Well done man.Congrats
@IJustGotHere
@IJustGotHere 4 жыл бұрын
"APC 9x6" Abby said give you some "props". Great job! You have to teach me what you learn. 😀✈👍
@michaelhalstead5641
@michaelhalstead5641 4 жыл бұрын
I love the flight almost as much as you guys on the commentary!🤣😅🧡 AWESOME!! Keep em coming!🙃😎👍
@TheRcSaylors
@TheRcSaylors 4 жыл бұрын
Thanks a lot Mike!! 👍⚓😎
@brendanomara339
@brendanomara339 4 жыл бұрын
Some sweet aerobatic flying there sir! Looks like a really fun plane!
@EJ-74
@EJ-74 4 жыл бұрын
Abby had me rolling with the WOULD YOU LOOK AT THAT thing 😁😂🤣😂😁 I know that's a blast to fly a 3D for the first 👍✌️
@rancepowell834
@rancepowell834 4 жыл бұрын
Looks awesome Nate. You are a very good pilot.
@discman66
@discman66 4 жыл бұрын
Good job Nate 👍 Impressive Maiden!!!
@mike253905
@mike253905 4 жыл бұрын
flying it like a pro Nate
@telephony
@telephony 4 жыл бұрын
"crazy random stuff" hahaha!!! :-) @ 9:51 for a moment there, it sounded like Nathan said, *"Man those spuds!"* :-D Nate: *CONGRATS* on your maiden 3D flight with no crashes and even managing to stick the landing with the CG all out of whack!!! :-D *WOWZA!!!* Love the new outtro!!! :-)
@puremaga17
@puremaga17 4 жыл бұрын
Since I'm a 3D expert (Watched the Tucson Aerobatic Shootout live-stream ) 😜 Great job Nate! Looking good 💯 and with tail heavy CG to boot. Thanks Guys!👍
@Gmcworrior1
@Gmcworrior1 4 жыл бұрын
Hey I have no idea what a 3d plane is, or what makes it a 3d plane. Can u explain or send me a link?
@puremaga17
@puremaga17 4 жыл бұрын
@@Gmcworrior1 3D refers to maneuvers that can only be done by RC aircraft that have very high thrust to weight ratios and large control surfaces, as they mostly are done when in a stalled condition (Not relying on laminar airflow over lift and control surfaces) Like when Nate was hanging the plane on its prop (Hover). Lots of good info on 3D planes and helicopters on the web.
@Gmcworrior1
@Gmcworrior1 4 жыл бұрын
@@puremaga17 thank you. I was lost. I have never encountered that term before. But I have seen the hovering done via prop. Thanks :)
@ng-iq4kx
@ng-iq4kx 4 жыл бұрын
@@Gmcworrior1 check out Jase Dussia the 3d world champ and you will understand what 3d flying is.
@56chevy11
@56chevy11 4 жыл бұрын
Great job! Keep on, keeping on...flying this fun to watch airplane.
@robertrogers7610
@robertrogers7610 3 жыл бұрын
Great flying! I took my scout Cub s2 out this am, first time Ever with an rc plane, it was a Real blast!!!
@didactylos4diddy474
@didactylos4diddy474 4 жыл бұрын
Well done Nate. Tried 3D twice in my time and I was glad to get both down safely.. I fly to relax not to worry all of the time it is in the air
@UncleEarl97
@UncleEarl97 4 жыл бұрын
Good job Nate! Cute and supportive video master, and she does a pretty good job flying as well.
@charlesparmele
@charlesparmele 4 жыл бұрын
Another sweet flight!
@dollarbill6877
@dollarbill6877 4 жыл бұрын
Sweet flying! You look like a natural!
@marktomlin7199
@marktomlin7199 4 жыл бұрын
Nice job Nate 👍💪
@rcfanaticdublin
@rcfanaticdublin 4 жыл бұрын
Hey Nate, That looked great to me buddy...Abby's camera work was great too.😃👍
@timmason6625
@timmason6625 4 жыл бұрын
Great flying. A lot of fun to watch
@TheRcSaylors
@TheRcSaylors 4 жыл бұрын
Thank you Tim 👍⚓😎
@davdaya
@davdaya 4 жыл бұрын
omg.. i thought nate goin for 3d next year.. but tis is a quick move.. good for u nate.. !!
@bryanbryant9962
@bryanbryant9962 4 жыл бұрын
I was amazed at how the H-King Voltigeur can fly in such unusual attitudes. I don't know much about this, but after a little bit of reading, it seems that the control surfaces are designed with this capability in mind. For a first flight this was impressive!
@sputniksam
@sputniksam 4 жыл бұрын
Kudos to you Nate for jumping in the deep end, and BIG kudos to Abby for the video work. I have a few larger 3D Hobbyshop Extra’s but I also have one of these Hobbyking Voltigeur’s and lately it’s the latter I’ve been flying the most. You appear to have the MK1 version of this plane as the MK2 has CF landing gear, an up-rated ESC and motor combo, and I believe up-rated servos. One extra bit of kit I can recommend is the EagleTree Guardian. As well as having a basic stabilisation mode it also has a 3D mode which will help you with learning the stick combos. As you become more proficient you can start to reduce the gain to the point where the Guardian is effectively switched off. There is is similar device sold under the HobbyEagle name which is cheaper than the EagleTree, I have a handful of these but I’ve not had the opportunity to test them as yet. Regards Nidge
@adrianstanciu8876
@adrianstanciu8876 4 жыл бұрын
Awesome guys!😄👍
@dastardlydave1455
@dastardlydave1455 4 жыл бұрын
Crazy awesome flight!!
@alanhafer828
@alanhafer828 4 жыл бұрын
Nice plane. I'm not a plane guy , but you looked like you did very well to me ! Heck , you saved it from almost crashing! Give yourself some credit Nate ! I have the confidence in you that with practice you'll do very well! Get up with that young boy you had on back in the summer . I'm sure he'll help you out . He flew a 3D plane . Great video work Abby ! 👍👍👍🙏🙏🙏⚓⚓⚓😃
@Ben-311
@Ben-311 4 жыл бұрын
You don’t give yourself enough credit. You did great Nate. Made me want to buy one if I had a place to fly it.
@skymaster547
@skymaster547 4 жыл бұрын
Awesome sauce...great first flight Nate.
@TheRcSaylors
@TheRcSaylors 4 жыл бұрын
Thanks a lot! 👍⚓😎
@t.murphy5978
@t.murphy5978 4 жыл бұрын
Yes Nate! I always tried to do stuff (somewhat) like this with my flying wings...but it was Nothing Like This! Way to go!
@randyseaver8319
@randyseaver8319 4 жыл бұрын
Didn't hit the ground nate! Your skills are definitely getting better! That was a epic flight brother! You did pretty awesome for your first 3d plane! Just seeing you smile a getting excited got me excited! Hopefully we can see you fly at hobby fest next year!👍👍😎👽
@scottsample9626
@scottsample9626 4 жыл бұрын
Honestly I never understood the appeal of 3d flying, but I think you did a great job for the first time. Any time you can expand your skill even for a single flight without crashing, means you had a great day! Keep pushing!
@RunThatRC
@RunThatRC 4 жыл бұрын
What you talking about! Your a natural! Nice flight and you had a ton of fun and that's what it's all about! Keep it up guys!
@mtctookie25
@mtctookie25 4 жыл бұрын
Good job Nate!
@jaybailey4394
@jaybailey4394 4 жыл бұрын
Lol Hey you two. That's what I say all the time. I say" would you just look at it? " Ed Bassmaster is everywhere. Your killing it Nate. Great videos.
@ecoslast1394
@ecoslast1394 3 жыл бұрын
From children's toys to nice planes. Your channel is getting very nice now.😄
@TheRcSaylors
@TheRcSaylors 3 жыл бұрын
You just trolling?
@cgvideosviapawpawguthrie
@cgvideosviapawpawguthrie 4 жыл бұрын
Love 3-D planes ✈️.! Keep up the good work Especially Foamies
@islandrc-duke1972
@islandrc-duke1972 4 жыл бұрын
great flying and awesome plane
@richiebricker
@richiebricker 2 жыл бұрын
Awww, Nate was once a human after all. But you were still good with alot of barrels and hovering. I guess my plane is 3D by default cause i just shoved a big motor and receiver into a glider. Ive done alot of those same moves, just not on purpose. A couple minutes ago I decided to by a gyro for it and maybe I can actually fly it
@bretsnoke9213
@bretsnoke9213 4 жыл бұрын
Good job Nate.
@DeadlyDiddly
@DeadlyDiddly 4 жыл бұрын
You did great Nate, and you're a much better pilot than you give yourself credit for. Practice inverted; the harrier (flying slower and slower until you prop hang); you almost had the hammerhead mastered; stall turns; snap rolls and 4-point rolls. Also make sure you have some expo, not sure if you use it but it's a good idea with 3D planes even if you don't use it with other models (no idea why anyone who has a Tx that can do it wouldn't), it makes 3D planes in particular a lot less twitchy.
@markattardo
@markattardo 4 жыл бұрын
You're off to a good start Nate. Nice slowmo sequences Abby.
@bukikkibaruka3127
@bukikkibaruka3127 4 жыл бұрын
That was a nice flight...good plane 👍🏾
@mosesjh8272
@mosesjh8272 4 жыл бұрын
Awesome maneuver! I'm learning in the flight sims LOL Wish I can be good as you flying! But first I need to purchase the real thing LOL Thank you for sharing
@ronstewart9792
@ronstewart9792 4 жыл бұрын
Looked great to me. For your first 3D that was awesome. I could not believe how easy you got to vertical hover. I need that plane, I have been trying to learn hover for quite a while. Thanks Ron
@DAVIDBrown-zp8sz
@DAVIDBrown-zp8sz 4 жыл бұрын
I thought the Zazzy was considered a 3D. I still haven't flown my zazzy since you twisted my arm so long ago Nate.
@graymatter45
@graymatter45 4 жыл бұрын
Nice flight Nate
@sxrvant
@sxrvant 4 жыл бұрын
Beautiful Presentation God bless🙏🙏🇳🇬🔥👍
@zapdawg
@zapdawg 4 жыл бұрын
Nice job Nate looks like lots of fun. Maybe some dual rates might help the learning curve. I really am enjoying the slow motion shots.
@deansnyder804
@deansnyder804 4 жыл бұрын
Good job,I've learned alot from you guys.Im just beginning.Deano
@Loyalwhiteknight
@Loyalwhiteknight 4 жыл бұрын
That was fun to watch. I don't even know what a 3D plane is or how it differs from a regular RC plane.
@steveroxx69
@steveroxx69 4 жыл бұрын
Looked like you been flying it for a while like a boss lol good job your wife is an awesome camera operator 2
@TheRcSaylors
@TheRcSaylors 4 жыл бұрын
Thank you very much 👍⚓😎
@timmylumsden8060
@timmylumsden8060 4 жыл бұрын
Pretty sweet flying for a first time...chaotic craziness!!!
@paytonissteezy
@paytonissteezy 4 жыл бұрын
Sweet plain really COOL 😎
@Nickwillfixit
@Nickwillfixit 4 жыл бұрын
Well I am impressed, can't give you any tips still waiting on my beginners plane to land.
@jasonsuffolkuk
@jasonsuffolkuk 3 жыл бұрын
What voltage do you set the alarm for?
@hamzaibrahim2041
@hamzaibrahim2041 4 жыл бұрын
Hey guys! I have the extreme flight MXS and I'm running it on 6s. I also have the extreme flight Extra gasoline. I'm running it on a 70cc DA engine. Both 3d! Great vid guys keep it up.
@szakalbarnabas87
@szakalbarnabas87 4 жыл бұрын
Wow that was a nice first flight with a 3D plane! May I ask how did you film it that any part of the video could be slow-motioned? 60p video?
@mebourke1
@mebourke1 4 жыл бұрын
Mashes the sticks like a madman.....Hmmmmm.....Looks like professional flying to me.
@johnstansbery7382
@johnstansbery7382 4 жыл бұрын
Nice!!! 😎
@matfpv287
@matfpv287 3 жыл бұрын
How do you pair a dsm2 Rx with the dx6e?
@karlp.9171
@karlp.9171 4 жыл бұрын
You definitely did a good and I don't know about you but I think the accidental tricks are the best tricks especially when you save it !
@rogerpenndorf5221
@rogerpenndorf5221 4 жыл бұрын
Masterful JOB Nate That is hard I BET Ive managed seconds at a time Good Luck Saylors
@countdown_ok
@countdown_ok 4 жыл бұрын
That was sooo cool. I want to know more about it. I do want to see how you grow on 3d flying.
@alexdonis21
@alexdonis21 4 жыл бұрын
Best videos on KZbin
@boeing747400ifly
@boeing747400ifly 4 жыл бұрын
I love my Voltigeur Mk2. Almost 600 flights now. If you go to 4S reduce the prop size and upgrade the ESC. I use a 60 amp ESC and the 12x6 carbon fiber prop from my Tundra. It hovers very well.
@radmoore4998
@radmoore4998 4 жыл бұрын
Hay nate it look good to me man!! That's what it all about man having fun and loving it. Looks like Abby doing good job filming it! Like listen to her when you fly, thanks guys and gal
@trickmustang1994
@trickmustang1994 4 жыл бұрын
You did a very good first ever 3d flight. The most important thing is that you had a great time and you landed the plane in one piece. Remember practice, practice.
@laithalsabbagh2255
@laithalsabbagh2255 4 жыл бұрын
thank you guys, I'm learning too into this hobby, since I was a kid I want to fly plains :D
@FarrellMcGovern
@FarrellMcGovern 4 жыл бұрын
Congrats on the 3D plane! Take your time, and remember that you have an insane amount of control on that plane, so a light touch on the controls, only use what you need. Stunt flying is about precision, and you need to practice flying in a straight and level attitude, then do a maneuver and finish it straight and level. And above all else, HAVE FUN!!
@batsonelectronics
@batsonelectronics 4 жыл бұрын
the STIG is flying it. Wow is he/she talented. Cars and Planes !
@Skydive4ever
@Skydive4ever 4 жыл бұрын
Nice flying Nate :-) Awesome hovering. I crashed my Edge 3D 540 balsa planes a couple of years ago because of a shifted battery. I was doing crazy flat spins, the battery shifted towards the back making it tail heavy, and on my 'Just one more' flat spin, it flat spined great, then I tried getting out of it about 20 feet high, nothing, it just kept doing a flatspin, ... all the way to the ground, lol. May I recommend a lot of radio expo on all surfaces, it allows for more precise control on maneuvers. Try to have the same rates/expo on the sim as close as possible to the feel on the real plane. Pick a maneuver or two to work on and dedicate a few flights to work on that maneuver only, first on the sim and then with the plane. PS Gotta love the ear to ear smile on you face, it says it all :-)
@8kigana
@8kigana 3 жыл бұрын
Nate how is your 3D flying? I have this plane I haven't unboxed it yet. Also a lot of complaints with esc have you had any issues? Thanks.
@dkearns04
@dkearns04 4 жыл бұрын
Cool!
@commonrc9938
@commonrc9938 4 жыл бұрын
Nice save in the intro nate
@Delfi1900
@Delfi1900 4 жыл бұрын
I love how Abbey gives you so much positive support (: my flying doesn't look good!!!! Yes it does!! It does to me!!(: you go Abbey ,,,, can't wait to see you doing some fancy flying with this plane,,,, you too Abbey,,(:👍🏼👍🏼👍🏼🙏🏼🙏🏼🙏🏼
@thefamjaycrew3901
@thefamjaycrew3901 4 жыл бұрын
I’m late tonight lol happy thanksgiving Canada 🇨🇦 it’s our thanksgiving weekend ⚓️⚓️⚓️⚓️👍👍👍👍👌👌👌👌👌
@stellerate
@stellerate 4 жыл бұрын
Happy thanks giving then!😉
A EASY flying SOLID entry level JET - H-King Viper64
12:33
Jay Kujan
Рет қаралды 8 М.
Русалка
01:00
История одного вокалиста
Рет қаралды 3,2 МЛН
Me: Don't cross there's cars coming
00:16
LOL
Рет қаралды 14 МЛН
The Unexpected Genius of Contra-Rotating Propellers
11:39
Ziroth
Рет қаралды 81 М.
80mm EDF Eflite radian disaster
3:16
Fly As A Kite
Рет қаралды 807
Voltigeur MkII 3D EPO Upgraded Aerobatic Plane Maiden flight
14:53
Petrincic Bros RC
Рет қаралды 21 М.
Testing 8 Innovative New Boat Propeller Designs
24:08
rctestflight
Рет қаралды 1,7 МЛН
Michael Wargo How to Learn 3D episode 1 -"Basic maneuvers"
15:43
Michael Wargo RC Flying and Instruction
Рет қаралды 263 М.
I Bought A GIANT R/C Jet... It’s SCARY Fast!!! (I can barely fly it)
49:12
Cleetus McFarland
Рет қаралды 2,3 МЛН
BEST Flying Warbird EVER! - Avios Super Tucano 1.6m
16:06
Jay Kujan
Рет қаралды 31 М.
Arrows - Edge 540 - 1300mm - Unbox, Build, Radio Setup, & Maiden Flight
2:52:19
Мой инст: denkiselef. Как забрать телефон через экран.
0:54
iPhone 16 с инновационным аккумулятором
0:45
ÉЖИ АКСЁНОВ
Рет қаралды 7 МЛН
Choose a phone for your mom
0:20
ChooseGift
Рет қаралды 6 МЛН