Will There Be Anything Left? Cutting More Off The FJ45 Ultimate Rock Crawler!

Go to Decked.com/FABRATS for free shipping on your Decked
Drawer System.
#fabrats #decked #fj45
Today the FJ is getting a little more love before we head to King of the Hammer's in California! Today we tackle the rear fenders. Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
The start of the FJ45 ultimate rock crawler:
The Start to the Ultimate Rock Crawler: • The Start to the ULTIM...
I just found a FREAKING UNICORN!! Should I build the ultimate Rock Crawler out of it? • I Just found a Freakin...
Some might hate me for this! Tearing apart the Ultimate Rock Crawler FJ45: • Some might HATE me for...
FINALLY installing the new motor in FJ-45 Ultimate Rock Crawler-But will it even fit??
• FINALLY installing the...
Will the FJ45 suspension EVEN WORK?
• Will the FJ45 Unicorn ...
Point of NO RETURN! We might have RUINED the FJ45 Unicorn
• Point of NO RETURN! We...
This Custom FJ45 Ultimate Rock Crawler Build Comes With Custom PROBLEMS!
• This Custom FJ45 Ultim...
To Airbag Or NOT To Airbag the FJ45 Rock Crawler, That Is The QUESTION!
• To Airbag Or NOT To Ai...
Cutting And Wedging The Bed On The FJ45 Ultimate Rock Crawler!
• Cutting And Wedging Th...
Cutting Fenders On the FJ45 Ultimate Rock Crawler Build
• Cutting Fenders On the...
I’ve Never Had a Shiny, New Part like this for The FJ45 Ultimate Rock Crawler….or EVER!
• I’ve Never Had a Shiny...
Installing The Custom Exhaust On the FJ45 Ultimate Rock Crawler Build
• Installing The Custom ...
Why Did I Do That While Building The FJ45 Ultimate Rock Crawler?
• Why Did I Do That Whil...
The FJ45 Ultimate Rock Crawler Gets A New Homemade Bumper!
• The FJ45 Ultimate Rock...
New Trans Tunnel In The FJ45 Ultimate Rock Crawler!
• New Trans Tunnel In Th...
Now We Might Be Able To Steer The FJ45 Ultimate Rock Crawler!
• Now We Might Be Able T...
This Might COMPLICATE Things! Will This Wiring Work for the FJ45 Ultimate Rock Crawler?
• This Might COMPLICATE ...
IT'S ALIVE!! The FJ45 Ultimate Rock Crawler STARTS UP, But Not Without A Few Hiccups!!
• IT'S ALIVE!! The FJ45 ...
Final Touches! Seats Are Going In The FJ45 Ultimate Rock Crawler!
• Final Touches! Seats A...
The Countdown Continues! The FJ45 Ultimate Rock Crawler Gets A New Bumper, Winch, and Fenders!
• The Countdown Continue...
It Finally Happened! How Will the FJ45 Ultimate Rock Crawler Perform On It's Maiden Voyage??
• It Finally Happened! H...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: [e-mail]
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 8729

[@67stang65]

The way your son explained cutting his rc body because of the way he fabricated the shocks sounded exactly like his dad and then your son asked if you liked his rc but he didn’t forget to tell his father his fender looked good as well. That has to be a proud dad moment. I love the way you included and interact with your kids

[@josephprentice8354]

That Was a bada$$ moment for them

[@jb3536]

"As long as you only look at one side at a time, you'll never know." No truer words were ever spoken.

[@llew777]

Gotta luv this guys sense of humor, look foreward to next off the wall smart assed comment

[@ericcorse]

Gave me a chuckle.

[@bradd5112]

That one got me good!

[@disgruntledegghead6923]

As an auto body tech I wholeheartedly approve of that statement...

[@williepelzer384]

Just don't walk back and forth to many times. 🤔

[@lendersbagels01]

Best part is seeing the kiddo ask you if you like his new custom RC body, and immediately compliment your work on the fender wells. You are doing an excellent job raising that young man, Paul.

[@block4565]

He and the rest of the children are clearly afraid of Paul. They respect out of fear. Especially Landon... just desperately trying get approval. Paul gave a quick, 2 second approval and then just went right into focusing on his project, his issues, his success.. You can see it in 90% of the videos. It's still that old school, broken mentality of using anger and intimidation to parent your children that Paul (and many others including myself) were raised by.. It breaks more people than it helps and that's why we've seen the shift the last few years. That old, military style parenting is for the birds. You can even see the huge insecurities in Paul...constantly complimenting himself, gloating, needing to be in charge or in control... all a result of trying to convince himself he's "a good, capable person" and it's never enough because his dad didn't know how to communicate. I was raised by the same and I'm the same age as Paul, so it's very obvious to me. I think we still have so many unaware people that reproduced and now they think they're doing good by raising that offspring the same way they were raised. Broken and insecure. Thankfully the younger generation is done putting up with the bullshit and they've started to speak up/ revolt.. I just hope guys like Landon can heal before they commit to a crazy life of fear and anger as their guides. That's how you end up a sheep who votes for a global laughingstock like trump. Or think you need to run out and buy up all the guns you can because we have to kill to survive... its a ridiculous and weak mentality that is thankfully crumbling

[@mulldb]

@@block4565 If you simply MUST deal with your Mommy issues in public, I hear that it's pretty easy to set up your own channel. But no... It's SO much easier to tear down someone else. Somehow, I don't think Landon will give a rat's patoot what your opinion is! Hang in, Landon. You'll be great!

[@levergun]

@@block4565 PLEASE don't reproduce.

[@treborheminway3814]

Landon and Paul doing bodywork on their rides and showing some love for each other's work was great. When it comes down to it, Fab Rats builds relationships with its audience even better than its does fenders! ( and the fenders are awesome )

[@james94582]

Need some mini FabRats decals for the RC!!

[@BladeHQ]

Paul, the fenders look great. But I think Randall and Michelle in the Decked drawers won. lol. -Dallas

[@electrontube]

that was pretty danged funny

[@722garage9]

Absolutely! I love the way Paul and the team do the ads. They have a great ‘body’ of work now…

[@ronaldbarnes8302]

The fenders turned out awesome! Michelle and Randall in the Decked drawers was hilarious! Look forward to your videos, thanks for sharing!

[@steven.h0629]

I think its great... over at Matts the other day he was roasted for doing a skit.. 😕

[@tex24]

The Decked promotion was very clever. I usually right-arrow my way through those parts of videos but you guys made it fun. Good job. Priceless moment... 20:44

[@jdc8352]

Whoever is doing the editing, is doing a fantastic job. There's bits and pieces of the jangles that take me back to my youth, for whatever reasons. Thank youuuuu

[@T-o-m-s]

I'm pretty sure it's Michelle, she's killing it!

[@rodezell2563]

Paul, I"m sure glad you decided to restore Ed's Golden Nugget. I would've never found your channel. You guys are great.

[@novavroomvroom6809]

Can't wait to see the YOTA finished... If I remember correctly, you owe the previous owner a ride when the YOTA is complete... Can't wait to see his reaction...!!!!

[@troymartin735]

Same here, I was scrolling through the comments to see if anyone had asked.

[@johnme7049]

It's almost like you knew what you were doing! Don't forget the custom 'YODA' decal, that will look great in the back window. This build has been Awe-Some! It is so much fun hanging out with all of you. Thanks Michelle for all the work you do behind the scenes, keeping everything running, and for putting up with us. You guys are just doing a great job with everything, including raising some fine children. We know you are proud of them. Have fun at the 'Hammer', be safe and God Bless.

[@ModernDayTemplar606]

I’m happy to see FabRats is going to the King Of Hammers. BF Goodrich will be proud to have you all and the FJ in there booth. That bed turned out very nice. I bet you all had a blast filming Michelle and Randel in the Deck system. That’s what I need for the inside of our Yukon to store all the OverLand gear.

[@TheBloatedPony]

Dang I'm glad I found y'all. You make us normal people feel like we can do this stuff. Thanks!

[@llew777]

and you sir speak the truth, recently someone sent him a whole box of sharpies

[@mikeworkman3593]

@@llew777 Shouldn't they have been dry erase markers, lol, so he can do it twice, lol. (JK)

[@mikeworkman3593]

What are you trying to say? That Paul is just some normal dude? (JK, lol)I don't know normal dudes that can wield that good. Or that can fabricate metal so easily.

[@mikediaz6588]

Lol he is not normal.

[@ksingleton101]

@@mikeworkman3593 Mark 3 times cut 12 times.

[@ronaldburton5163]

Paul this build had been so much fun to watch i gotta say your family is amazing how they all interact together especially Landon at his age ,most kids now are glued top a video game or phone great to see him learning your craft..

[@Mountain_Paladin]

I love this channel because of family. When Landon walked up and showed his dad "his" project there was a very special moment there . Those are the moments that make a life precious. God bless this family.

[@larrydavidson3402]

Great job on the fender wells Paul. Like how you guys do your commercials, always good for some laughs.

[@peterpiper2719]

I know the FJ will look fantastic when it’s painted, but I love the patina look it has just now.

[@grimsoul0]

It looks perfect for a rat rod crawler truck. Just put a clear coat on it to protect it and it's done.

[@iffykidmn8170]

@@grimsoul0 Flash rust the new metal first to give its own patina and then clear coat the works.

[@macgyverbryan1377]

Yes do keep the petina, that was decades in the making.

[@yomauser]

I don't remember Paul even mentioned something about a painting job.

[@gordonmurray3153]

I reckon Robbie is going to have some kind of breakdown when it comes time he tries to prep that fab ratrod for paint. It'll likely be Easter before he's got to masking it off for painting. 😜

[@SB-vt9tz]

Love to watch you work! The amount of knowledge in Paul’s brain is amazing. I wish they sold Fab Rats eyecrometers 😊

[@ryanmartin4453]

Did anyone else notice the huge stash of Mountain Dew in the background during the UPS delivery? (Around the 5min mark) 😂😂😂 Fenders look awesome...we have learned to never doubt Paul's abilities! You're awesome!!

[@CountryAndClassics]

Nice job on the Fender-wells! Got a kick Paul, to the tune of Clementine. Reminded Me of ole Huckleberry Hound.

[@Mountain_Paladin]

I loved that old blue dog...lol

[@stevenwithanS]

Proud to be Canadian. We have TRUCKS, lol. The support from USA is heart warming. Together, we stand for freedom.

[@gordbolton27]

Mount the seats backing up to the cab with racing harness seatbelts so no one gets thrown out when you hit a bump or suddenly have to swerve. Truck bed passengers can go airborne really easy!

[@warrenmichael918]

Im sure he doesnt drive like a fool when his kids are actually in the bed though.

[@disgruntledegghead6923]

I'm not going to ask how you know why bed passengers can go airborne easily... But yes, I'm certain Paul will keep them secure.

[@warrenmichael918]

@@disgruntledegghead6923 If my dad wasnt an idiot, LOL, i might not have been standing in the seat of his old 70s pick up truck as we went across the train tracks. I was 3 or 4 they say, i was bounced up and right out the window!! LOL Thankfully it was in town on a rough track so we werent going much over idle speed but i did in fact get tossed out the window! No injuries , tickets or fines but it was in 72 or 73...

[@shawnnastone1378]

HAhaaaaaha! Love when Paul makes his own sound effects for things he is doing! Still know what he means by the noises. FJ is perfect, see how proud you and your family are, sure your Pops is pleased and proud! I think there should be a weekly Q&A with Michele ;Name the Part' Randall your commentary is becoming one of my favorite parts of Fab Rats! Absolutely love father and son complementing each other! I cant get enough of just how your family life is like. Not coming from a home such as yours, always have a respect for 'a normal life' and gives insight to help me maintain one for myself. One of most real and honest loved You Tube channels I watch. Thanks Fab Rats!

[@garrydurfey9700]

So, you said it in this video: Rat Rod. used to be that wasn’t that complimentary except for a very few builders 30 years ago. But now, it is a theme. You asked what color, I say a lot of clear coat!!!!!!!!!! Because of KZbin, you are already known. Why give this incredible look up!!! I think it is very distinctive “Fab Rats FJ Yoda” just as it is. Yes, the sliders/fenders might need black, some undercoating in a few spots, etc, but the outside for the most part, it is you!!

[@michaelmiller8525]

Top notch fab skills, gives me good vibes to watch you you fabricate, totally enjoying this build and can’t wait to see the golden nugget!

[@dave499]

King of the Hammers?! Love this build. Fenders look great! The eyecrometer is dialed in!

[@wildforesthome6563]

The king of all hammers is the hiiiiyaaa hammer

[@grumpybigfoot8856]

Lol Land asking if his dad digs the RC body and then throwing back a compliment on the fenders was about as wholesome and relatable as it gets.

[@christopherwedemeyer2993]

Anyone else want a FabRats \ Vice Grip Garage confab just to hear them talk to each other? A feller might get a chuckle out of it....

[@jackmoyer2174]

When Landon was explaining his RC body mods, “because I modified the shock mounts” I thought “of course you did, you are Paul’s son”😀

[@davebenson1504]

🙂 love that stockpile of green cases at 5:02 min mark 🙂 Great craftsmanship... great lesson in design... Thank You

[@kevinfullbright2263]

One of the best fab shows I’ve ever seen! Also genuine people do honest work. I think you should label you off-road builds as “Trail Ratted”. Great show 👍🏻😊

[@angrydingus5256]

I like all the subtle angels going into it. At first I wasn't a fan of narrowying up the bed in the back, but now all the little angles on the sliders and fenders really tie this sucker together. Looks great

[@vicmiller7191]

Great episode 👏 those fenders are awesome and the advertisement for the deck drawers was a classic... job well done guys...

[@rattles3044]

Looking Good, Paul ! Before paint,I hope you do not forget d-rings for tiring down that cooler full of Dew !

[@user-mp2qj6rs9c]

That was so cool, the young one asking papa if he liked his work. It's really pretty simple folks, if you raise your kids the correct way you don't need to worry about them making bad choices, it just kind of works that way. You've got a great respectful young man but I don't need to tell you that.

[@barnhooty2956]

I miss the aircraft jig and fixture fab shop work I did for 40 years. Love watching you cut...grind...weld....drill....machine/etc sheet metal along with working structural steel to make anything. Great job Paul. We used mostly soap stone on greasy structural steel lay out and silver lead pencils for sheet metal lay out work. Looking forward to see it all painted up for a pro classy look.

[@stromstackle4804]

I love this build keep the sweet videos coming

[@TVsGringoStarr]

Michelle did a fantastic job on the edit when Paul dropped the gas cap.

[@bandgfarms6112]

The Mountain of Dew in the background cracks me up! You have one of the best shows on KZbin…thanks for sharing your projects and abilities with the world!

[@myrnacox9770]

Soaking in the nice warmth from the wood stove, watching my faves!Now ain’t Life just awesome. ? Ah hi Wade my fav UPS guy, all in the same video. Wow!!

[@joshwoodburn3828]

Are you going to paint her? If so what color? I think it looks sweet the way it is, that's an awesome build you have. Keep up the good eyecrometer work.

[@nathanrotar5012]

I was thinking clean the shit out of it and clear coat it

[@icantsaywhat]

I think he said a while ago he was going to have Robby Leighton paint it. It’s the guy ho is currently painting Matt’s off road Cherokee. I could be wrong but I think that’s what he said he planned on doing

[@tangosierra1]

Can't wait to build my RC version of this!

[@kccreations5945]

I appreciate that you heard Landon's idea on attaching the fender to the sliders and went with it. I always felt so validated when my dad would consider or even utilize my ideas on a project he was working on! So great to see that in your family too! Great build and video as always!

[@toplink]

Haha, Randall and Michelle in the drawers was hilarious. Great upload. Lots of good family interaction goin on. Big thumbs up!

[@BennettT9]

Lay that tape on the stove for a Min or two and it won’t tear like it does when it’s cold.

[@billclark7815]

Amazing job on the fenders. We have a fuel tanker & fab shop in London Ontario your work is beyond normal just great

[@MrGixxer1300r]

Great example of a good father and son relationship. As always awsome content

[@alopandur]

I loved "will grab couple of blue tapes" and Paul gets three... 😊 Awesome fabbing job !!!

[@wtt8914]

And here's another bumper sticker moment from Paul; "We got Hammers so we know how to Fix that". LOL Great stuff as always.

[@juanbarturen2726]

Man, you make it all look so damn easy. You do good work

[@doublel7337]

Hey, I received my Fab Rats T Shirt. and I love it ! Always like to watch the fab shop videos, I worked in a sheet metal shop, and then a Heavy steel fab shop where I ran a 600 amp Lincoln wire machine with 3/32 flux core wire. So your videos bring back a lot of good memories....

[@johntuttle5396]

Don't usually really care too much about the commercials in KZbin videos, but realize that they're a major part of making it possible for the KZbinrs produce their videos. In the past, I've gotten a chuckle when Paul and his team "do" the commercials "in house". But the "Decked" commercial was outstanding! Couldn't stop laughing, great to see the team showing their creativity and exercising their "acting chops"! You should make a seperate video on the "making of" the Decked video. Interesting to see how the two stars got themselves inserted into the drawers! A lso, the FJ45 build is pretty good too!😃

[@beesoutdoors8418]

Love the fj wish i had the time and money to build one like yours its awesome 👌

[@richardthomas1743]

Good morning Rats !!

[@timmccreery6597]

Landon is modding his RC car- following Dad's footsteps. Nice. Don't miss an opportunity there.

[@whit3chick3n]

I love when the channels that I watch grow enough to get actual sponsors

[@darenm617]

The FJ looks awesome.. Question, when will the wind shield be replaced and will the size be hard to find?

[@mattmcgee97]

They’ll just trace it and make a new deal if they have to.

[@briankellum416]

What are the chances that Paul will fabricate an oven and start making his own glass?

[@Strider1954]

That's flat glass, replacement won't be a problem. That curved corner glass however would be a very different problem. Maybe Paul should consider caging those in? ;)

[@Big-chub69]

Dang those Fenders look good 👍 and very uniform to the rest of the Build,looking Good FABRATS!!

[@tomfuller9010]

The fenders and bed drawers have it together definitely a win

[@Mt_Goat694]

I know this was fixed a long time ago but I want to say thanks again for making the loud noises not so loud anymore. Ie. the grinder, it's so much easier to watch without having to turn it down and then up again to hear what they're saying, good job editing!

[@pvtrodeo]

The FJ is looking awesome. Safe adventures to and from KOH. Watching your videos has helped me get motivated to start my 84 toyta build

[@wizerd5150]

that truck Rocks ; )

[@soma7040]

that decked commercial was absolutely AMAZING! lol

[@andybucher452]

The FJ looks so good the way it is. You could consider doing a matt clear just to preserve it. It's much more unique than if it were shiny. As is it stands out more from the crowd. It literally screams 'build not bought' which is fantastic. Greetings from England, AndyB

[@scottsoffroad]

First thing Friday morning hot coffee in hand,a day off with a new video on the FJ. Life is good. Thank you friends

[@gregj.gotham4402]

Great comeback. As long as you look at one side at a time.

[@daphnebaumanns8026]

We just left King Of The Hammers and are just seeing this!!! I’m so bummed! Would’ve loved to meet y’all and see the FJ! We live locally. Wish we knew when you guys would be out here! Enjoy and have fun! KOH was a blast! 🤘🏻

[@lorenpatterson2101]

We enjoy your Chanel! Caught it after watching Matt’s! Hooked ever since!! Our family has been going to Moab Easter Jeeping for about 25 years! Grew up in a shop learning from my dad! Relate to your shop a lot! Thank heavens for learning from the good old boys!!!

[@jimw3799]

The thing you don't understand is the tedious welding and fabrication is why we are here. I am so impressed with your work and love your humor.

[@Mia_9135]

I like the way you and your kids work together. Awesome that they’re learning so much early in life.

[@michaeldurling793]

Get a vision and make it happen, that's how it's done. I like it and you kids were havin to much fun makin that Decked infomercial. Best add for Decked I have seen to date.

[@JwcubTHS]

Great FabRatication work, Paul! Those Fenders and Wheel Wells turned out nice! Thanks to your Decked commercial, Coroners all over the world will want to get Decked soon! 😵🤣

[@dawoodjr]

That’s the best comment I saw all month - on any channel!

[@stevezozuk9622]

YES another trip next week. Now you really get to test out the FJ. Great content as per the norm lol. Love the adds you do they are funny. You can tell that you'r having fun with it all and that's why you have so many followers , you'r genuine. Thanks for being the best show on the tube. Definitely be seeing you on the next one. Cheers

[@jamesmccartney5731]

Paul,you are the master of fabricobbling! Great job!

[@ROgletree]

Landon is already a Fab Rat. Customizing his RC car. He’s got Paul’s genes.

[@TryhardEh]

Been binge watching this series over the past week. Love seeing the evolution of this beast!

[@jeromes58]

You really have perfected your Eyecrometer skills. Best new word in my vocabulary. Thanks.

[@davidsanders4703]

We enjoy the long videos Michelle. Thanks FabRats!

[@TeatimeAndy]

The editing on your videos is so good! ..this is what every bs TV show should be.. The real deal. Fenders look cool man!

[@remorrey]

I totally agree. I believe it's still Michelle?

[@GeorgeMalonedj]

I know nothing about welding and watched this entire episode. Another great creation!

[@MIKEH.777]

That bed looks really good now. You should put the seats in up against your cab like the old La Brat trucks in the 80's they were bucket seats up against the cab with seat belts and a roll bar over them and going to the floor of the truck bed . Keep up the great work and God Bless you and your family.

[@glenhart6087]

Just love that little scream Michelle put out when u pulled tool box out with her in it so cute

[@obroberts5929]

It makes my day when I find a new video from Fab Rats. I've subscribed to many different channels, I'm going to have a problem if I find another one that that I enjoy as much as Fab Rats. I only wish there were more per week. Tho I do know that Paul has a real job and so it is unrealistic, but I can dream. From Fairbanks, Alaska USA, till the next..👍👍

[@cliffcross6487]

I love the way the FJ is turning out.

[@RolandoMarreroPR]

It all coming together! It was a beast in Moab! Can’t wait to see the FJ Rat finished!

[@inmyopinion6836]

I must say, it's easy to watch you fabricate. So many of these guys have me screaming at the screen, saying " WTF are you doing? ? ?" like I know what I would do. Dyslexics unite! I'm with you guys.

[@chuckster6513]

Hey Paul, Randal, Lovely Michelle and the whole FAB RATS CREW The YOTA really needed that lovin on the rear fenders ( Inside and out ) to Make it look so much more "almost" complete. Lando, that is a beastly lookin RC chassis ! Sometimes I wonder why there is not smoke jeting out from Pauls ears. His brain is always in high gear workin on a project at hand, some comedic responce in a conversation or plans for the future. Get it done while you can Paul, Cause getting old catches up to all of us. It just was not all that long ago that I was 15 years old workin on my first car. Now I am 73 and wondering where time went. Thanks for the GREAT videos gang. Stay Warm, Be Well

[@jimmymccracken9702]

I was watching a car show this morning in Brookfield Florida and in the video you could hear some old guys talking about the Fab Rats going on and on about how great the builds are so to me thats great to hear in the back ground so thought you'd like to know, love the FJ45 its something I wish I would have built, Jim las vegas nv

[@dougalexander7204]

Storing family in the deck trays? Ingenious.

[@kennethdavila6261]

This is a wholesome channel. I personally enjoy the interaction Paul has with his Sons in the shop, reminds me of my dad and all he taught me by putting me to work in the shop and on his projects as well. God Bless ya'll!

[@CarswithNash]

Nice work Paul.👍

[@caz87xj]

Bring the whole family to KOH, it's definitely an awesome experience.

[@petermccuskey1832]

Fantastic detail work. Great job!

[@avbangers1341]

Representing BFG at KOH Paul! Really!!!! My man that’s wicked news. Looks like your hard work and commitment is paying off. FJ is looking awesome!

[@offroad6309]

Looks great. Roll cage next?? Soooo, with the nugget out of the shop when do we see the pickup and delivery to Robbie? I'm sure picking up the banana will be part of the drop off. Getting everyone's channel coordinated will be fun to watch. The drawer segment was perfect, I expected nothing less from you guys.

[@mitchkayla9195]

“Im getting old. I’ve been on my knees all day in this bed and I have 3” left”. Made my day Paul.

[@dudleybaggerman9574]

Robby and Matt can Fix and Finish Ed's Golden Nugget !!!! ✋✋✋✋😎

[@MrPoppaLu]

It is only a Rat Rod because it was created by Fab Rats. Love that thing!

[@williamjohnson1606]

Fenders look great Paul! She is really coming together!

[@bdjm8595]

Nice work Paul and crew!!!