Will This Square Body Purchase Be JUNK Or A GEM?

#fabrats #fabrication #squarebodychevy
We bought a square body. Did we make a huge mistake???? Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
Videos you'll love:
STUCK! How Are We Supposed To Help This Guy If We Can't Help Ourselves?
• STUCK! How Are We Supp...
One Step Closer!! The Golden Nugget Gets A One Of A Kind Shifter Installed.
• One Step Closer!! The...
This Farmer Fix Took A Shocking Turn!
• This Farmer Fix Took A...
Serious MacGyver Skills Were Needed To Pull This One Off!
• Serious MacGyver Skill...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: [e-mail]
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

[@Knightraven000]

Ben has really come into his own on FRs. It's obvious that he really knows his stuff! Funny guy too!😁

[@dfsmustang]

When Ben said get the soap I laughed so hard knowing that is a shade tree fix to get the tank sealed to get you home.

[@cliffordhuff932]

Ok watching today's Release 7 20 Paul's comment don't have a cool pocket like yours..pocket t's your there..and and everyone who doesn't like a kind of lafter..I feel sorry for them. Y'all rock

[@Halfbittenjalapeno]

Definitely two branches from the same tree 🌳

[@MrRichards86]

"It's been sitting for a day or two"

[@block4565]

@Gerry 🤣 "Fab Rats" was too long to type out huh?

[@salvatorebaleno9807]

"Welp, in true Fab Rats fashion, we've made things worse then they were before" - Paul "We broke it" - Ben That part had me cracking up because it was such a brotherly moment of temporary defeat. We all knew it wouldn't last long though.

[@ralphramirez2975]

If it ain’t broke…..

[@mannycweiss3053]

i admit, i stole a line from paul...his wife was trying to do something and he says..."you gotta put your back into it little fella"...cracked me up, glad i stole it..

[@dpyles9396]

@@ralphramirez2975 ... Paul ain't touched it yet !!!!! JK PAUL!!!!!!

[@edwinmercer9525]

Funny, you guys are too much. Ben cracks me up. We need more of Michelle bustin' a move. LOL 😆

[@FPSCongo1]

"You cant take the ladies out with no AC" I wish my dad was like this 😂 and then Landon right away helping Grader. What a great bunch of kids

[@USN1985dos]

I know plenty of other people have said it, but Ben's been a great addition to the Fab Rats team. You guys are all awesome and make some great content.

[@2milesowen587]

I laughed when Ben said that your son would like to pickup and you said like it or not that’s what he has got. Reminded me of the time I bought my son a decent vehicle to go off to college and he wrecked it right away. So I went and bought him a used K-car LeBaron. He said it was an old man’s car. I told him to drive it accordingly then.😜

[@danbrooks8241]

Ah the ol Chrysler k cars

[@snuffysmiff]

I started mowing lawns for cash when I was 11. At 12, I began working as a busboy and worked my way on up from there. I got my learner's driving permit the day I turned 15. That evening I bought my first car-and not one penny came from my parents. They were frugal and wouldn't even if I had asked. I was sheer hell on that old Mustang but I paid (sometimes dearly) for everything that was done to it out of my pocket. Soon, I realized that being out on my own meant no more tearing up my transportation and I calmed myself down. That was nearly 50 years ago. I'm still awaiting my first "participation trophy" along with my "white privilege" card. At least, I'm not holding my breath waiting for those silly things.

[@larrythompson8630]

Blow a couple engines? Put air in bike tires.

[@tomdom_0143]

@@snuffysmiff pipe down turbo. It’s not a competition for who had it harder.

[@bigdamnhero9041]

Ben is such a great addition to the channel!

[@TheScoundrel70]

Well, if nobody has named it yet, I think Domino fits. Once you get into it and knock that first "domino" over, it sets off a chain reaction until you end up with a pile of fixed and replaced pieces on the shop floor.

[@noonehere1793]

Tell your kids how lucky they are to have a dad like you…seriously. I didn’t have that luxury growing up and the times they get you spend with you teachIng them and helping them are priceless.👍👍

[@doug9418]

I just wish I had a father that gave a shit. 🇺🇸God Bless America 🇺🇸

[@tedconroy5074]

I really smiled when Graden walked in with the welding gear on. He looked like he was on a mission to get that lawn mower rippen.

[@robertwebb4245]

WOW the best part of my morning is waking up to Fab Rats posting a coffee and breakfast video, Thanks Fab Rats ...

[@salvatorebaleno9807]

I always watch KZbin at night, but I'm at home in bed trying not to let these damn kidney stones kill me, and other than the stones, I'm really enjoying watching this video this morning.

[@psg6314]

The easiest way to put a governor on the truck is to put a bolt underneath the gas pedal and weld it to the floor

[@i-_-am-_-g1467]

Ahh yes, the "redneck restrictor".

[@rogerdavies6226]

friend of mine wired a 2x4 to bottom of gas pedal

[@gmcman355crazy]

If you push hard enough it will just bend it ask me how I know lol lol

[@i-_-am-_-g1467]

@@gmcman355crazy that's what she said

[@DiscoFang]

Easiest way is let the carpet mat slide forward and ball-up. My girlfriend said "don't like this one, it has no power."

[@runswithdogs6892]

"His right foot is not communicating with his brain. We're working on that." "truck's good, she's mint. It's Landon's problem now." says Paul. Priceless.

[@rickwhyte6639]

I love watching you guys. I used to think I was the only person that had these problems. I think I have encountered every problem and made every mistake. This is good stuff. Kudos to you

[@DonAshcraft]

I'm going to miss Randall! Even so, in the beginning of the video Ben did a good job of solo working. Filming, working and narrating at the same time. Like a one-man band! Haha 😆 I also like the nice family stuff all hanging out and working in and around the shop. ⚙️🔧🛠️ 🙂

[@TitanBodybuilding]

What happened to Randall?

[@DonAshcraft]

@@TitanBodybuilding they announced it on a previous video. He got a job doing something he's passionate about. It's all good.

[@TitanBodybuilding]

@@DonAshcraft Thank you. I apparently missed it.

[@DonAshcraft]

@@TitanBodybuilding No problem. Happy to help.

[@rodgerricker7171]

@@DonAshcraft thanks for explaining what happened to Randall, I was wondering. Was hoping bringing Ben on didn’t squeeze him out, glad to know it’s all good. Ben is a real asset to the channel!

[@hustlinghard8081]

Ben is a wonderful addition to the shop, I was if-y when he first started but he's becoming one of my favorites. Just a good Ole boy that has gotten really really comfortable with the camera. You can definitely tell that Randall is no longer with yall because the camera footage was all over the place.

[@martinphillips7227]

Hi Ben what part off country is it ilove to meet you all but I am Double amputee.I Live in Nottingham UK and I just had to get too yo u my martin Phillips please will you send a text to this email address so I can get my smile back I am vary low at this time I have just lost my mum 3weekgo she was crematorium yesterday 18th July ..pps Alltwen best to all martin 6 pmuk.......let

[@dartnurse3449]

So, youse guys are more entertaining than watching my chickens fight over a June bug. Seriously, good wholesome fun, entertaining and an easy learning experience! Thanks for what y’all do.

[@FastestSN95]

“We fix problems and create problems at the same time”. You have no idea how many memories you have uncovered when my brother and I tinkered with vehicles! Thank you guys.

[@rweyant2001]

It's nice seeing people having the same troubles I do when working on cars. Everyone else always seems to only have to do things once. Lol

[@davidsanders4703]

Thanks Michelle for the extra long video!

[@welldc]

Bens contribution to the channel just gets better and better. Love how you guys 'make it work', even when problems keep cropping up.

[@allangooge7871]

Love watching Paul and Ben. Brothers doing what they love for a living. Some of the best land in the world to work and live. And drive on. 👍🏻🇬🇧

[@coryjamesc]

When you take the OLD bearings races out, you can Grind the outside so the slide in and out of the hub freely, and you can use the Old Bearing race to punch in the new ones without any troubles, and they go in pretty evenly that way.. Just a thought.. Love the Channel

[@johnthorpe6333]

Hay Paul you're doing something right, most of the time the kids are working on projects of their own. The over size welding coat and helmet was great. Nothing wrong with good clean fun.

[@MrTexast79]

Started watching yall just to follow the nugget as I have been a Matt's off road fan for a while, but yall have become my favorite channel. Keep up the good work 👍

[@anthonyscolyer2444]

Same here now I watch both as well as Robby Layton because of the Golden Nugget but he speaks a bit too fast for me sometimes. Much prefer this slow drawl on here for these Aussie ears

[@kezzatries]

@@anthonyscolyer2444 too fast.... Too fast? Understatement of the year. Don't know if I'll go back after the nugget, even though he does a great job.

[@cpmcnaughton]

Same here.

[@pieterv6984]

Good job keeping your spirits up while keep solving yet another problem on it. I must say, seeing such a truck getting such maintenance is as rewarding to me as the special builds.

[@GrayMatterBBC]

Love that you guys put another square body back on the road. Those are my favorite trucks. Great truck for the son. Fab Rats working hard and kicking ass!

[@lasieboss703]

Never too much content on square body's👍

[@edwardcokley9224]

I know I said the samething! Part of why I love FabRats channel gives me ideas and actually shows the process so I can do new things to my 85k10

[@bigguyjosh6420]

Whistlingdiesel would like to know your location

[@COM70]

Your kids are so lucky. Filming, editing, spannering as well as every type of family life and DIY. They have to grow up as talented well balanced young adults.

[@desertd2609]

I feel Landon’s pain, I blew up transmissions in my younger years! I can’t tell you how many th350 & 400’s I replace before my 21st Bday! I got so good I could R&R them in about 2 hours and I bench pressed them because I didn’t have a lift or a trans jack.

[@edgarcia4727]

I’m glad I’m not the only thinking about transmission😅 17 years old with a 85 el Camino I’ve blown through two transmission so far I thought I was being stupid witch I am but I’m glad It’s just a normal thing that is younger guys like to do🤣 the burn outs or taking off are way to fun not to do soo

[@desertd2609]

Funny Ed I had a 75 El Camino Sport at 17(50 now)! That car got me in a lot of trouble and probably went through 4 transmissions in it over the coarse of 3 years but I use to street drag with it and it was my daily driver!

[@centralcoastcamper9631]

I really love how you keep your channel family friendly. No need for endless profanity like some other car hobby channels.

[@skistrycharski6999]

You two are a great team, good call for you, “BOTH” !!!

[@Majja13]

Fantastic, I love how all the kids are building stuff in RL and not on the screens. I would love to hear the story of how he blew the other motor!! You and Ben make a hell of a team.

[@UtahWaterLog]

I look at Paul's face and examine the lines. These are the lines of a man who spends a great deal of time smiling and laughing. You guys are doing something right and I'm loving the channel. Thank you.

[@michaelfritsch4027]

BEST VIDEO YET! Two brothers who seem like BEST FRIENDS - fixing many SquareBody Chevy common problems for their son/nephew - love it guys! Keep PLUGGING away......

[@joeblow5154]

I love how the metal chips are going into the manifold thermostat housing. It will help clean the dingleberries off the water pump impeller.

[@DeanF]

Right??? Just a few inches of blue tape...

[@benwah65]

This motor is used to eating junk did you see the throttle body

[@dfsmachinist5941]

How else do you fix a leak in a radiator?!? /j

[@netrepreneur1967]

@@dfsmachinist5941 First it was not a rad, it was a thermo housing with a broken bolt stuck in it that are very tricky to get out without either welding a pry piece to it or drilling and rethreading the bolt threads!

[@montegtaylor]

Great to see the old truck back on the road. Not sure if we will be able to do this to a current truck in 20 years.

[@dfusit]

You guys rock. Such a great family oriented channel with real mechanical skills being shown. Keep up the great job! Michelle jammin to Baby Got Back - Classic!!!

[@dougalexander7204]

Ben knows stuff and I just noticed in the collared shirt he looks like a man of distinction. Three cheers for the family working together.

[@dennisdain987]

It's amazing how many nitzy fixes a person can do to a vehicle over the years. One compounding another. You forget about the last temporary fix because something else needs attention. I know this from experience. LOL Great job from the Fab brothers on search and destroy (search and fix) with this ol' truck.

[@cecilmckeithan5088]

All my life I was told you could fix anything with baling wire and duck tape. But apparently whoever owned that truck was told silicone and jb weld was the fix all 😂

[@michaelm.1947]

They'd still be driving it if they'd've stuck w/ baling wire and duct tape!

[@cecilmckeithan5088]

@@michaelm.1947 did learn years ago that cloth hangers are nice to have around too. Not only do they come in handy when you’ve locked your keys in but can do some fine brazing when in need.

[@rickcampbell9265]

@@cecilmckeithan5088 The newer plastic ones just don't work as good!

[@cecilmckeithan5088]

@@rickcampbell9265 👍

[@emilyengels8891]

Whatever yall do don't let Ben leave the channel. It's definitely a family show to enjoy with him on it now.

[@SuperIanjohnson]

I just love watching your videos; the banter between y'all is brilliant. Well done on getting that piece of junk fixed up for Landon.

[@sporty196071]

If you use the earlier tank it from a non F.I. truck it doesn't have the baffle a F.I. tank has. It might stall when turning corners when its low on gas. I have had over 100 73-87 gm trucks. You guys do a great job, you are some of the best mechanics and fabulous fabricators.

[@58apache]

yup super smart not putting something in the thermostat hole while welding and drilling and grinding

[@missingremote4388]

That is a lot of trucks I can't imagine ( I average a different car /every 10 years)

[@rjkeenan8955]

Clean and polish the tools so they'll look good in the freshly powder coated box. Attach the box with some of the magnets you boys took from old car speakers to a wall, door, lift, or what ever. After you round up enough magnets place each socket, ratchet, etc in that freshly powder coated box. Lid open put the box in a place it'll be tough for anyone to miss. They'll have to look to see how everything stays in the box. That's when they'll notice the cool old tools.

[@bigredc222]

I think they should be given to someone with a Desoto.

[@madrew2003]

I've found that the more experience you have at a trade the ''Luckier" one gets! I'm not surprised Paul nailed it! haha

[@hupka3145]

"If it doesn't start after do'in this, we're gonna have to shut the camera's off for a minute" .... boy, we've all been there. I felt that statement.

[@sarahmoore3831]

Ben love watching you, you and Paul are fun to watch working together.

[@helmutkrahn9337]

Bunch of fun! And the ending with a serendipitous CD find, the timing back into the workshop and Michelle couldn't have been better if you'd planned it (um, did you?). (Every time I saw the grille, my OCD wanted to grab side-cutters or hacksaw blade and take out the bars opposite the missing ones to make it symmetric.)

[@TreeLBollingTreeMan]

Same here for me on the grille.

[@benwah65]

We found a different one to put into it Landon’s problem now

[@skeetermcswagger0U812]

Yeah that grill looks like Iron Man after an upper cut from the Hulk!!!

[@deltavee2]

Yeah, me too on the grille.

[@helmutkrahn9337]

​@@skeetermcswagger0U812 I guess we'll see what Sir Lancelot does about it - since the ball's in his court now.

[@Tom-uf2um]

Man, a great dad and uncle. Young man is lucky to be growing up with you guys.

[@davidnorthrup3674]

Well done. It reminds me of that old saying. Old Chevys never die, they just rust away. That's a good driver. 👍

[@bogwin9621]

The exposed wires and experimental gas lines and tank with the rag for a patch is epic. Will you paint spray can flames as joke? Love your hard work.

[@shawnlowry5834]

Started following a little more than a year ago after MORR led me here. Love all that you are doing, the family inclusiveness and how much you teach the kids. They will thank you for it later if they are not doing so now.

[@helmutkrahn9337]

Second that: Also started from Matt's; and the kids will also be able to work for themselves; they won't helpless.

[@frederickbehn5610]

I really enjoy this channel, fantastic pacing, content and knowledge. Great Job!

[@devarskinnee8760]

Gentle Ben, always com, and collected, he and Paul always figure out what day problem is. Geter done square goodness, I had a 76 Cheyenne 4x4 small block 400. Get truck made me a lot of money. Love brother skinner.

[@wjadam815]

I ran a massive VTL in a shop a few years ago and it leaked probably 5 gallons of oil a day. I was filling an old watering can with oil so I could top it off, well the nozzle on the oil pump was unscrewed to far and it shot off with a little pressure behind it. It was one of them 55 gallon drum pumps so it squirted like 3 quarts of oil at my neck and chest. I went home free of charge that day, only worked for about 4 minutes. I was so mad I just drove home sitting on a big trash bag with oil dripping into my boots. Good times.

[@xvsj5833]

Sweet old/running truck, thank you for sharing Paul !!! 🇺🇸✌️

[@ktmcc4360]

Tuesdays suck. Thank god for old videos that are worth another go round!

[@DarkHorse902]

That JB weld fix reminded me of something that I would have done in my 20s. I once had an 86 Bonneville that got a pin hole in one of the brake lines. I sanded it to rough it up, put a gob of JB weld on it, and wrapped it in paper towel to keep it in place until it set up. That fix worked great and out lasted the rest of the car. Lol

[@deadaccount6135]

Yep ole JB done right fixes a lot. Had a similar problem with a pinhole in the corner of my gas tank on my first car, 69 Ford Falcon, after JB it never leaked an you couldn't tell it had been repaired. 👍

[@darksideemt]

The CD find at the end was totally the cherry on top of this video. Great work guys!

[@merlepatterson]

I recommend welding in oil soaked clothing. It always adds a level of "Suspense".

[@michaelm.1947]

LOL! Comment of the day!

[@haywire17]

"We're gonna need to shut the cameras off for a minute...".... most honest, accurate statement ever... I swear this old stuff has personality. It was just waiting on someone to "give it some love", and the "Old girl" was basically, sayin'... "Well, while you're at it.... I've got this, and this, and that......that also needs attention..."

[@johnperun232]

Another Great Video Alot of old school content Love a square body Have a Great Day 👍 God Bless America 🇺🇸

[@thomasdunn22]

That was a fun episode, thanks Fab Rats. Ben is a great addition he is getting more comfortable on camera.

[@torinobob]

I started as an apprentice mechanic on a fleet of mostly square body GMCs. The job I most dreaded on them was dropping the saddle tanks.

[@lionelkinunwajr5713]

You know it's truly awesome to see you two brothers working together. I lost my brother in 2018 . We were close as well. Never lose that closeness it truly sucks not having my brother around. God bless you all and thank you for involving all of us in your wild and crazy fun life.

[@klaw163]

Cool truck, especially with fuel prices so high little 4.3 with a manual trans and 4wd? Pretty rare I would think

[@diamondbkr]

Agreed. Love this rig.

[@kellytaylor8665]

Paul and Ben thank you gentlemen so much for all the information you give to your audience as she do these jobs on the square body you give enough detail and explanation it really makes it interesting and very educational

[@richardchisholm2073]

Had an 87 Silverado I bought new and absolutely loved. It had almost 200K when I had to trade for a crew cab. This brought back good memories. You and Ben work well together, at least on camera. He is a great add to the channel. Hope Landon appreciates all the work on his behalf and treats that old beauty with respect. He could learn some body work and make her pretty again.

[@cathiepieszak6967]

Nice to see those brotherly smiles in that shop

[@olehickoryoutdoors6815]

It's a good thing you had Michelle there to help diagnose the problems and help Ben and Paul get the truck running I love the old square bodies Landon enjoy your ride.

[@boh348]

the 4.3 4 speed trucks are just amazing trucks on how long they can last. The old 4.3 I think is plenty for these trucks. goes down the road yet not enough power to break everything.

[@jeffrentsch4318]

Glad to see someone else struggling with square body chevy. My 1982 K10 keeps showing me new stuff that needs fixed. Great garage community

[@kennethboucher7663]

I’m really liking the family camaraderie and teasing between Paul and Ben.

[@davegagnon23]

The old TBI only runs 15psi that hodge podge fuel line worked minty lmao 🤣 but glad you spent the time to make it right

[@3gunshooter60]

Great job guys. Love the family interaction. Landon should be able to keep this one running for a while, huh! Teenagers are awesome, aren't they. 🤣🤣🤣 I was one once, a long time ago. 😁

[@concernedcitizen3651]

Do those kids know how good they got it?????? No...not until they hit 30 or 35 ..lol

[@get470]

Lando, what better memory that watching your ol'man and Uncle thrash on your wagon like two mechanical gods... 🛠️

[@saintracheljarodm.holy-kay2560]

And that's how you do it. Take care and be safe and God bless amen.

[@u.p.tinkering]

Great episode, brought back memories of when I had to wrench on the boys first cars. Who am I kidding, still wrenching on their stuff from time to time.. lol Love the channel, keep up the good work and don't change a thing!!!!

[@iaam117]

What a cool family you'all have. Pretty awesome to see your boys help each other build stuff.

[@nathanmonahan6157]

6:30 Lando got it right, little brother needs his help more than dad does, that's a good big brother right there.

[@nocrackhere]

I'm a little bit older than you guys . At 18 :59 you made me remember something of old.. But I remember as a kid, my Dad often said "Sometimes It's better to be lucky than good"! You guys are great. Your whole family is awesome!

[@ronbyram3880]

Do you have to worry about metal fragments going into the thermostat opening?

[@ag1382]

Yep, waiting for thermostat to open and push aluminum chips and grindings into radiator.

[@codygrooms3127]

I was thinking the same thing

[@rosscoder6380]

I bet they used the good 'ol aluminum magnet 🧲 😉

[@TD_YT066]

Redneck stop-leak :)

[@T-BUZZ]

FABRATS: they do it so nice I watch it twice 😎

[@DavidMamanakis]

I recently sold an '84 Chevy K10 "heavy half", 4x4, 700R4, and the old 6.2 Diesel... (with Turbo)... I LOVED that truck. My Grandfather bought it brand new off the showroom floor. We kept it, and it barely survived my son. So we sold it to a guy in Idaho... I hope it finds new life up there... I would have held onto it, if I had known you needed one... A "race truck" it was not... but if you needed to tow or haul something, it would do it!

[@joegraffhobo-elect9128]

Paul , I'm glad you brought Ben into the shop. You an he are great working together. Reminds me of me an my brother. And your positive attitudes and humer make it so much more enjoyable. And I have indeed changed a turbo 400 , with no jack,in a gravel parkinglot, with snow coming down. I know the pain and swear words

[@RCRitterFPV]

this is great, one of my favorite episodes, love the tear down and investigation. then how you guys just bang the repairs out... I've done an engine swap on my Kawi Concours... done a bunch of brake jobs... that's about my limit. but I'd you guys do it right... enough... hahah great stuff.

[@Beaumcwhorter281]

The boys are definitely blessed to have a awesome dad and uncle who can pretty much work on anything that comes their direction🙏🏻

[@CarswithNash]

That’s a pretty nice truck, we would call that “Alberta Clean” around here lol!

[@lookup2one]

🤔 Hmmm, I wonder where Landon got the lead foot from? I love seeing brother's working together ❤️ Ben has been a great addition to the Fab Rats channel! Michelle showing her❤️‼️I love the square body!

[@KJ-kw7gh]

Ah yes Ben, the back up cylinder method. Good to have when it drops a cylinder, just reapply the spark plug wire and good to go.

[@MikeBaxterABC]

4:08 I broke the thermostat housing bolts off a truck just like this when I was a boy :) ... I drilled the broken bolts (not perfectly centered either) with tap drill size for 1/4" 20 and taped them. I meant it as a temporary fix, and planned to "add it on" next time my truck needed a real mechanic ... but it lasted longer than the truck did :)

[@sepehrzandi6239]

Love these longer episodes! You guys are just good people and are deserving of your success! Keep spreading the love and positivity!

[@rolfdrieen7591]

„Take the camera off for a minute.“ Great humor! Great team! Fun to watch.

[@scottphillips88]

This was a really good episode. I like real trucks where I learn something new. Thanks!

[@dalegereaux1863]

When we were teenagers and our cars broke, our Dad would have us help fix it. He would show us or tell us what to do for the most part. That way we learned how to do it and the fact that we did it ourselves made us less likely to break things again. I was just wondering why Landon wasn't in there working with you guys since it's going to be his truck to drive ? I've seen him work on things before and he seems very capable.

[@hammyh1165]

Same here , I wasn't allowed a car unless I could fix it or pay someone to fix it , luckily my dad was a great teacher.

[@DavidBergman1776]

Well, for one, he was filming half or more than half the time. Also, it's kind of (I don't mean to be rude) none of your business, especially considering that Landon did almost all of his first truck with Paul.

[@handymansteve]

no percussive maintenance?? that's the best part!! good to see another square back on the road

[@theamerican8337]

Rare to see brothers getting along so well. Wish I had that kinda relationship w my brother

[@dalbyadventure]

I love square body trucks, grew up driving an old one my dad gave me when I was 16. Can't tell you the amount of times I ran out of gas in it. Awesome video as usual!

[@bigguyjosh6420]

Whistlingdiesel would like to know your location

[@dalbyadventure]

@@bigguyjosh6420 oh shit! lol

[@RickDominick69]

You know what I discovered when I was Landon's age is that if I had to pay for it and I had to fix it I took better care of it. Finding other people's workarounds is part of the enjoyment of fixing things because people are just lazy one stupid to Lazy three lazy lazy lazy lazy. And then when things burn down or go wrong they scratch your head and say you know I probably should have done that differently. Hindsight is not 2020 it's just lazy people

[@tedwpx123]

You guys work so well together under Michell's supervision :) Nice family. All the Fab Rat offspring are always up to modifying something👍👍😊😊👌👌✔✔👀👀

[@1944chevytruck]

2 WEEKS!.....AWESOME WORK EVERYONE!...

[@michaelclairforet5031]

As soon as he starts having to pay for it with his own money he’ll start taking real good care of it

[@KR-jq6ru]

I agree with your statements, but I believe he bought a lot of the parts for the first build..great boys and if breaking their cars are the worst problems they cause, WELL DONE!

[@taylorstephensstormtracker4638]

Nope