Willsenton R8: Fixing Lead Dress and Grounding Faults.

  Рет қаралды 4,222

Skunkie Designs Electronics

Skunkie Designs Electronics

Күн бұрын

In this 2 part video, I show how to follow best practices with the wiring, both with lead dress for the tube heaters, but more importantly how to correctly lay out the grounding using the "Star ground" method. This also resolves what I consider a major flaw with how the output tubes are grounded.
This is a video series about the popular Willsenton R8 KT88 EL34 Push Pull tube audio amplifier. We will go through the repair this amp needs, testing and reviews of the amp as delivered, and then work on modifications to improve the sound quality and durability.
A great book for DIY amp building info!
Morgan Jones: Building Valve Amplifiers.
amzn.to/3X2hKfk
You can buy this amplifier here
amzn.to/3Q3Ynjr
If you would like to join my Patreon to help support the channel:
www.patreon.co...
Or donate on my website:
www.skunkiedes...

Пікірлер: 52
@brycejeannotte7699
@brycejeannotte7699 Жыл бұрын
Most people would just ignore the headphone output on this kind of amp. Your changes just make good sense. Looks very clean.
@frankgeeraerts6243
@frankgeeraerts6243 Жыл бұрын
All what you do and did to this commercial hyped amplifier is correct to reestablish the real standards ( old school ) of building and designing a tube amplifier and will be helpfull to every person with a passion or interest in tube amplifiers , I can only congratulate you ..........
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Thank you! :)
@Davor-f9v
@Davor-f9v Жыл бұрын
Dear Steph, thanks to you and your videos about Willsenton R8, my friend was able to fix mine, which by my mistake (turning it on and off in a short time) one channel stopped working. Without you it would be an impossible mission. Extremely grateful!!! Davor
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Glad I could help!
@cobar5342
@cobar5342 Жыл бұрын
You are helping many people with this series
@augustonorona9717
@augustonorona9717 Жыл бұрын
PLUS taking this already amazing budget Tube amp to another waaaaayyyy higher level & without a doubt + audible improvements! BRAVO!
@augustonorona9717
@augustonorona9717 Жыл бұрын
You are so refreshing to watch, your explanations are evidenced based & can't get enough of your videos!!! I'll slowly work on the bias wiring & eliminate the possibility of the amp from "red plating" or melting other components or parts of the amp, is definitely a must DO!. Again, thank you for your passion & wisdom & patience in showing & explaining the reasons for the rewire or upgrading from cheap electrolytic caps to better audio components without breaking the bank. I love this project you did. More power to you! God Bless!
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Thank you!
@augustonorona9717
@augustonorona9717 Жыл бұрын
@@SkunkieDesignsElectronics ☝👍👌🙏
@scaryperson27
@scaryperson27 Жыл бұрын
Could be the efficiency of someone's speakers as well. You're killing it in these videos! Awesome!
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Thanks!
@claudiomartinez7188
@claudiomartinez7188 Жыл бұрын
Thanks Stephe! As I said before these videos are not only informative but also a great addition to the hobby.
@alaingingras7224
@alaingingras7224 Жыл бұрын
Hopefully, the factory will see this and build accordingly!
@abxaudiophiles
@abxaudiophiles Жыл бұрын
GREAT STUFF!!! I just got this amp and this is SOO helpful. PS- just emailed you. Thank you.
@tryintobesoquiet
@tryintobesoquiet Жыл бұрын
Thoroughly enjoyed this project. Thanks!
@RomiPetrut
@RomiPetrut Жыл бұрын
Another excelent and very well explained video! Congratulations for all the great videos you made!
@RnhTechnologic
@RnhTechnologic Жыл бұрын
you are amazing.. keey going with amazing info and support we love you
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Thank you so much!
@iainford7592
@iainford7592 Жыл бұрын
Another great vid ❤
@caliani74
@caliani74 8 ай бұрын
Great video, my amplifier has the same symptoms. At low and high volume, the background noise is small, but at half volume you can hear that noise. And I can add the fact that the third tube (EL34-6AC7-PHILIPS-MULLARD BLACKBURN XF2-B3H2) reddened more than the others. I changed them with others (El34) and it seems to work. I don't know what caused the problem with that tube, but it seems compromised.
@DerekSheerin
@DerekSheerin Жыл бұрын
Looks really great Stephe. Have loved this video series and you have a great ability to teach as you go. I have recently entered the tube DIY sphere (just finished by first amp - Bottlehead Crack/speedbacll). Are you planning to publish a BOM on your website? It would really help as i'd like to go through your mods methodically looking at my amps current layout and building to your designs. The BOM would help as I believe not every person who has bought this amp has the same components (e.g. the same resistors in the same places) and i am not sure i should be driven by what's in there currently.
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Absolutely plan to do a BOM, but I will not post anything until I am 100% finished as people will complain if I post it early and then need to change even 1 resistor. I made that mistake in the past when people were impatient for a BOM, listed it before I was 100% done testing, changed two resistors and a few people lost their minds over having to pay more shipping on those 2 changes lol.
@DerekSheerin
@DerekSheerin Жыл бұрын
@@SkunkieDesignsElectronics That's so good. Thanks so much. You are fantastic for the community Stephe - people should go easy.
@Loggiebeat
@Loggiebeat Жыл бұрын
Hi Derek, I also use the Bottlehead Crack with the Speedball upgrade. It really was a fun build and it sounds fantastic. A great way to get into tube related audio equipment 👍
@anhdangduc1061
@anhdangduc1061 Жыл бұрын
Let's go. I've been waiting for this video. Thank you to the amp owner for agreeing to remove the headphone jack.
@amendez7150
@amendez7150 Жыл бұрын
Stephe, thank you for another great video. And thank you for you straight forward honesty . Interesting enough I have exactly the two hiss problem you mentioned., and yes the noise is there 1. Noise/hum at the 12’oclock on the VC , 2. Weird pitchnoise/ hum from the tube phono preamp (D.Sach). Is the solution to remove the headphone jack + wiring ? And/or removal of hug 115/230v switch ? Thank you, you’re fantastic ! Looking forward for the listening impression :)
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
I think this is mostly from the grounding + headphone jack but likely is partly from the heater wiring and using one leg of the output tube heater to ground their cathode. All of that is done poorly IMHO.
@1mctous
@1mctous Жыл бұрын
The sound of clean output will emerge like an artesian spring from the sound of silence.
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
That's a great way of putting it!
@jcphenry
@jcphenry Жыл бұрын
Thanks for the video. Is there any reason the screw just to the right, as seen on close-up view, cannot be used as a chassis ground point?
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Either direction is fine.
@rpsmith
@rpsmith Жыл бұрын
I'm amazed at all the crappy looking soldering joints in this amp! Also, why not just use shielded cable for all the heater wiring?
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Twisted pairs routed intelligently work fine.
@andreasbuxbaum9364
@andreasbuxbaum9364 6 ай бұрын
I have a willsenton r-800i with 805 and i do have left channel crackle while in mute mode on my high sensitive 106db speakers. The right channel is fine, overall sound is pretty nice. I guess some grounding problems too in this amp.
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics 6 ай бұрын
Not sure, those amps scare me. A made in China amp with 1000VDC inside it....
@toddhupp
@toddhupp Жыл бұрын
the owner will have an amp good for a lifetime.
@1mctous
@1mctous Жыл бұрын
The tubes will eventually get weak but the supporting circuitry will last a lifetime.
@augustonorona9717
@augustonorona9717 Жыл бұрын
A higher quality sounding amp after the mods & retrofittings! PRICELESS! ☝👍⬆
@nicholasgeorgeliatos1529
@nicholasgeorgeliatos1529 Жыл бұрын
please consider opening up the 800i?
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
I am
@northox
@northox Жыл бұрын
Arr you intending to compare the THD after you’re done with the mods?
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
Today I plan to do final testing and play with the GNFB on my scope.
@UptownReef
@UptownReef Жыл бұрын
Niiiiiice
@alanm.thornton4055
@alanm.thornton4055 Жыл бұрын
Puts on Stevie Wonder record....hears Dwight Yoakum for some weird reason! :D
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
HA! I was like WTH lol
@alanm.thornton4055
@alanm.thornton4055 Жыл бұрын
@@SkunkieDesignsElectronics 🤣
@3pan1
@3pan1 Жыл бұрын
What a lucky guy who gets his poorly populated but just goodlookin chinese amp upgraded to far and beyond average standards; i'd have the patience to wait till wonderful Skunkie says it's done, come pick it up and pay the expenses with JOY.
@fubarnow8907
@fubarnow8907 Жыл бұрын
My Primaluna changes to Tube Output Amp for headphones with a flick of a switch
@SkunkieDesignsElectronics
@SkunkieDesignsElectronics Жыл бұрын
I like that idea much better.
@antoniojoseandreomartinez9710
@antoniojoseandreomartinez9710 Жыл бұрын
Like
Willsenton R8: Fixing Lead Dress and Grounding Faults #2.
26:47
Skunkie Designs Electronics
Рет қаралды 4,6 М.
Willsenton R8: Push Pull Global Negative Feedback Tuning.
25:35
Skunkie Designs Electronics
Рет қаралды 4,1 М.
Good teacher wows kids with practical examples #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 12 МЛН
Ozoda - Lada ( Official Music Video 2024 )
06:07
Ozoda
Рет қаралды 30 МЛН
Flipping Robot vs Heavier And Heavier Objects
00:34
Mark Rober
Рет қаралды 54 МЛН
💬 Why is good grounding important? | TECHNICALLY SPEAKING
7:45
Willsenton R8:  Must do Modification to Bias Boards!
28:23
Skunkie Designs Electronics
Рет қаралды 9 М.
Negative Feedback - In Audio Amplifiers - How to Apply - Part 1.
16:09
Diabolical Artificer
Рет қаралды 611
Willsenton R8: Final Thoughts Willsenton R8 Tube Amp
22:39
Skunkie Designs Electronics
Рет қаралды 9 М.
FD7: Grounding, Jacks, & Shock mounts
24:44
DeepBlueHarp
Рет қаралды 793
Willsenton R8: Fixing the Shielded Volume Control Wiring
25:03
Skunkie Designs Electronics
Рет қаралды 4,8 М.
Willsenton R8: Repair and Testing!
29:01
Skunkie Designs Electronics
Рет қаралды 23 М.
Understanding Vacuum Tube Amplifier Schematics - Grounding - Part 6
28:36
Blueglow Electronics
Рет қаралды 27 М.
Good teacher wows kids with practical examples #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 12 МЛН