Willys CJ2a Jeep with a Kubota V2203 direct injection diesel engine removed and modified from a Carrier refrigeration unit. First Start up [Second Really!]
Пікірлер: 58
@louislandi9389 ай бұрын
Great engines. We had some on our grounds equipment at one of the golf courses I worked at.
@TheOldaz13 жыл бұрын
Very neat and classy conversion.
@MrGaryradford3 жыл бұрын
Thank you!
@brandonhensel13015 жыл бұрын
that set up is CLEAAAN
@LesSharp3 жыл бұрын
That's very clean! Nothing beats a diesel Jeep!
@suchasreallife5 жыл бұрын
That engine is art
@bobdinovo68894 жыл бұрын
That looks amazing. Great job!
@prabhdyalsingh47222 жыл бұрын
Beautyful....! Nice kabuta engine sound.
@rgnichols567 Жыл бұрын
Nice, I have 2 old jeeps, & 2 v2203 engines. I see at least one engine swap in my near future!
@philipgates9885 жыл бұрын
Absolutely gorgeous.
@TheHiramhdz3 жыл бұрын
Beautiful Jeep, nice motor
@danhambrick63314 жыл бұрын
I have a hard time believing that that is the "first" start up of that engine swap....lol....
@philipgates8693 Жыл бұрын
Right…no air in the lines. That was not the first startup.
@JsnrRobbins2 жыл бұрын
That thing is clean!
@Eric064104 жыл бұрын
👍 that will run for ever.
@MarsViolet2 жыл бұрын
This is beyond sweet.
@sonofculloden25 ай бұрын
Wicked cool.
@edivonelopes1164 жыл бұрын
Wonderfull!!👍👍
@cameron54473 жыл бұрын
That is awsome
@flaviosebastiaomartinspint33464 жыл бұрын
Beatiful
@axispowerdiesel4 жыл бұрын
Looks great, what oil pan did you end up using?
@jldude5555 жыл бұрын
Do You Have A Parts List for The Swap?
@rojoknight2 жыл бұрын
Great.
@fernandojaramillo7362 жыл бұрын
Que cilindrada tiene el motor, y de que marca es? Y cómo lo ajustaron con la caja de cambios ?
@SanjaySharma-nj4ri3 жыл бұрын
Good sir I like Willy jeep
@MrGaryradford3 жыл бұрын
Thanks!
@joseantoniovazzesinho11143 жыл бұрын
Aqui no Brasil faltou willys a diesel. Só tem a gasolina a gasolina é muito cara Aqui no Brasil.
@tejtrambharatt5182 Жыл бұрын
Hello how do you connect the turbo oil drain?
@harleyjune12334 жыл бұрын
awesome - what does it do road? i see these engines ranging from 2k-6k - how much work on yours was needed..? adaptor plate? made to spec or available otc?
@01AceAlpha3 жыл бұрын
Overlanddiesel.dom
@idahopotato58372 ай бұрын
Why is the key over there....?
@burden745 жыл бұрын
more info please or list of what is needed.
@GLOBETRAVLER210 ай бұрын
How much to complete your project?
@JamminJere6 жыл бұрын
Awesome job Gary!.. you guys all doing these kubota swaps are gonna make me do this to my 46 2A... my flathead is getting long in the tooth... what is the torque rating of the 2203?
@MrGaryradford6 жыл бұрын
Thanks Jerry, I don't know the torque rating and I took a quick look on the internet and didn't come up with any numbers - it has tons more torque than the original Go Devil engine! You should do the swap, I just chipped away at it a little at a time, trying to do at least one thing each day...
@TheArozconpollo5 жыл бұрын
Way cool. If I had to replace the flat head, I'd be with a Kubota. I have a Kubota 3 cylinder naturally aspirated diesel in a sailboat, Kubota makes great little diesels. Question: was color is your paint? Like it!
@MrGaryradford5 жыл бұрын
Thanks! The Engine Block Paint is Dupli-Color Engine Enamel with Ceramic - The color is Grey, I don't think they have another name for the color.
@stevepoore24105 жыл бұрын
Very tasteful installation! What is the horse power?
@Geonious4 жыл бұрын
The brochure states 39.9HP at 2800RPM (w/o the turbo). But, I'm seeing 50-55hp listed on eBay auctions (w/o turbo).
@3Mudbone15 жыл бұрын
A million times better than the new 'Jeeps.' In fact the dodges are rated in the top ten most unreliable vehicles along with mini cooper and land rover. My father had a Willys with a Perkins diesel several decades ago. They came from the factory with Perkins diesel engines, they are rare. I have an Isuzu Pup with a four cylinder diesel. No one has been making diesel engines longer than Isuzu, with the exception of Peugot. They are some of the best diesel engines ever manufactured.
@davidschofield89323 жыл бұрын
What kind of trans and transfer case are ya using? Adapters plates ect? You have piqued my curiosity.
@MrGaryradford3 жыл бұрын
I’m using the stock transmission and transfer case with a Warn overdrive setup. I had an adapter plate made up by Overland Diesel
@davidschofield89323 жыл бұрын
@@MrGaryradford Thanks I get in touch with Overland Diesel
@davidschofield89323 жыл бұрын
@@MrGaryradford What's the nomenclature on the Kubota?
@douglasaguillon52014 жыл бұрын
typ motor
@sithinstructor5 жыл бұрын
1400 for the adapter kit? Seems steep
@MrGaryradford5 жыл бұрын
Hey Josh you can always make one yourself! Go for it!
@floatingsidewalk12 жыл бұрын
Did you need to modify the transmission tunnel?
@MrGaryradford2 жыл бұрын
Hey! No modification to the Transmission bellhousing itself but an aluminum adapter plate was used between the bellhousing and the Kubota engine block. The adapter is approximately 1/2" thick. you can make the plate yourself if you have the skill, as some people do, or the plate can be purchased from Overland Diesel.
@floatingsidewalk12 жыл бұрын
@@MrGaryradford Great job on the mod!
@Laascaanood6143 жыл бұрын
What's your mpg?
@MrGaryradford3 жыл бұрын
I’m getting 33-35 miles per gallon. My original L head motor never got more than 18mpg...
@MrJeep754 жыл бұрын
Sounds like a bunch of Rock's in a washing machine, I hate noisy diesel's, but nice install
@Amarillobymorning7774 жыл бұрын
Well, the noisy the better. If u know what I mean.
@MrJeep754 жыл бұрын
@@Amarillobymorning777 not really, quitter the better
@MrJeep754 жыл бұрын
Nice job, but I would of left it stock couldn't put up with that rattley thing
@lonnielee2904 Жыл бұрын
Come on now that is not a first start up
@chrishultgren7772 жыл бұрын
A Japanese engine in a WWII Jeep? Talk about sacrilege. Blasphemous.