Wincc 7.4 Multiuser configuration , Server- Clients

[@jenelyngemelo739]

Thanks! however i would like to clarify if i can easily just change an existing single user server to multi-user so i could create a client to a different PC? and my existing network comm for the SCADA and PLC is through Profibus but when creating clients it should be through ethernet?

[@skythe7082]

Thanks alot. Very helpful video

[@m.shemul9362]

Start picture is not found in the client side. Though I shared server project with "everyone and simatic hmi" user eith full acess. I need help badly

[@sikandarsarfraz3980]

how to add more than 8 Runtime clients in wincc 7.4? i am using EKB liscense

[@leonardomorales6451]

Hace 15 minutos Hi friend. I have a problem, I have a project which was running normally under a client server architecture - everything worked normally, but a few days later on the client I get an image that says " The startup picture not found, please configure the desired start image" that you suggest me to make.

[@hamdhanibnumohamed377]

Im having one server with two clients, in that in server all buttons were working but in two clients no buttons were working, i couldn't shift to another pdl, when i click any buttons in client system nothing is opening but in server it is working fine. what may be the issue...?

[@achauto]

It always pops up a window (server unavailable) Then he opens a window (error when requesting the data storage interface) can you halpe me?

[@zehes5439]

thnks

[@jaikumars9910]

Dear @xuan ky Automation. This video is good helpful to me.. but I have 2 server with 2 client. So pls guide me how to do it. Thank you.

[@XuanKyAutomation]

Jaikumar S , if You have 2 servers and 2 clients you need to use distributed server clients. Look my video which have name' distributed server client ' in my KZbin channel.

[@jaikumars9910]

Hi Xuan Ky Automation , its good too.. but still I'm facing 1 problem. In server I'm created system login option it works in both server. But it doesn't work in both client . Even the user name password asking window also not appear. 😢😢. Pls help me.

[@nesarasic8982]

@@XuanKyAutomation 😏

[@typedat]

Thanks alot. Very helpful video. i only have 1 question.. When i activate the runtime on client i dont see any process value like feedbacks or analog values. What should i do to rectify it?

[@XuanKyAutomation]

Please see this kzbin.info/www/bejne/o4ennY2ZopJ9pqM follow my instruction

[@rolandomartinez458]

Hi friend. Your videos are great. We are having problems with the Client. Client is conected and everything is watched but it presents error on every script that access sql data base. Can you light us about it. Thanks

[@efeighorodje4983]

Great Video! Pls would like to know: Does Windows in your Virtual Machine have the same user name and password as the windows in the main computer? Thanks

[@XuanKyAutomation]

User name and password were configured in server project only. in this video make sure your simatic shell configuration network card must be the same with server. in means that in simatic shell of client you can see server. Simatic shell location in My computer under the Drive . right click and choose communication setting.

[@ngschool2007]

Anh cho em hỏi: em không dùng lần mà dùng wireless LAN bằng wifi kết nối sever vs client được k ạ! Em mới bắt đầu tìm hiểu lên k rõ ạ! Thanks anh nhiều!

[@XuanKyAutomation]

Ok hết bạn nhé

[@ngschool2007]

Vâng anh!

[@burraqengineeringsolutions5394]

when i activate project on client it gives error on picture window "Error in picture" . what is wrong with it.

[@XuanKyAutomation]

Hi my friend, at the Server you need to repeat: 1 / recreate Server Data 2/ in the server data, choose implicit update. click choose auto import and auto update At Client: Check and repeat steps like video. You can try with many time, create and delete project until you are familiar. I do the same.

[@burraqengineeringsolutions5394]

Xuan Ky Automation when I update server data of client project it give message that data cannot be updated

[@XuanKyAutomation]

Hi My friend, in the MULTIUSER system, You do not create CLIENT Project. What you do is: 1. creater server project/ PC/User and server data. 2. Active Win CC project at server before client 3. active client PC by open win CC and link to Server .MCP. and type User and Pass that All. - the most important is: 2 PC i LAN net work - in Server you need to identify Start picture for Client - Active Server wincc before client Hope my answer is support your issue

[@XuanKyAutomation]

For create Client Project Multiuser Servers Clients you can see other Video kzbin.info/www/bejne/eWLEnatrp8SgrLc

[@uuganbayarjargalsaikhan6272]

Hello dear Xuan Ky. I have followed you video. but when I connect a client with server, this message appears "This computer is not in the client list of the server project"? please suggest any idea. thanks

[@XuanKyAutomation]

Go to Server project add client PC name . or you can see this video solution link: kzbin.info/www/bejne/hIm2fGSMndKlrrc follow my video step by step

[@uuganbayarjargalsaikhan6272]

Thanks. and wishing good luck for you.

[@uuganbayarjargalsaikhan6272]

how to build the SCADA program from WINCC?

[@uuganbayarjargalsaikhan6272]

I mean how to create program from WINCC when project is finished?

[@XuanKyAutomation]

This issue you need to read manual of WINCC, learning Wincc Multiuse/ distributed /webnavigator/WebUX. this is advance knowledge, you need to learn slowly from basic to advance. download manual of wincc complete to read please

[@thotho-rb2db]

hay mà âm thanh nói nghe bé quá thầy ơi

[@XuanKyAutomation]

Cảm ơn em nhiều, cái này a làm lâu rồi lúc đó làm chơi chưa có kinh nghiệm hihi. Giờ bận quá kho làm nữa

[@ducbui1833]

a choi e hỏi thêm là tại sao lúc chọn Start Picture cho Client, mình có thể chọn theo tên máy chủ hoặc tên của Server Data vừa tạo ra. vậy khi nào nên chọn theo tên máy chủ, khi nào chọn theo thên của Server Data vậy a

[@XuanKyAutomation]

Thong thuong voi Win CC multiuser nay Client truy cap truc tiep vao Server project, Nen ta ko can phai tao Server data package cung duoc. do vay Client Start picture setting vao Server Project nhe. tuy nhien neu ta tao Server Data package thi ta co the dung cai nao cung duoc. CHu y, khi su dung DISTRIBUTED multiuser thi chung ta phai lien ket voi SERVER DATA Package, vi luc nay CLIENT Project se load Package tu SERVER chu khong truy cap vao Server Project.

[@GAUTAMKUMAR-ni1xs]

Hello, I have created a 1 server and 1 client project. When firstly I copied server data(.pck file), then it copied successfully in the client project and it was also running well with perfect data syncing. I have configured web navigator in the client project. So after adding a web- enabled user and creating a website in the client project, I restarted the PC, then now while opening project in the Wincc explorer, it is showing "Server not available". SQL is also not connecting. Please note- 1. Server project is up and running 2. Auto import and auto update is configured under implicit update. I hope it clarifies. Can you suggest me something?

[@XuanKyAutomation]

GAUTAM KUMAR Server is not available problem solving 1 , disable all virus soft, may be firewall controlled by antivirus software on to PCs 2. Try to disable firewall on server and client 3. You can try other different client.

[@GAUTAMKUMAR-ni1xs]

Xuan Ky Automation Thanks a lot for replying but fortunately this Server not available issue got resolved. Now I am able to take my client online. But now issue is I am not able to publish web site on IE irrespective of doing same thing as shown by you. Niether I am getting data on WinccViewerRT, whenever I am configuring this, it is showing "Unknown username or bad password" but I have correctly created a new user enabling web navigator option with same start picture which i am configuring in WinccViewerRT. But still i am not able to publish data neither on IE nor in WinccViewerRT. Can you help me out?

[@XuanKyAutomation]

GAUTAM KUMAR , wincc web navigator configuration is very easy. Please follow step by step in my video related wincc webnavigator. During publish web you have 3 selections web client,... Data monitor, please choose web client and set your Pc IP. In user administration you need click webnavigator check box for user and group which you want to publish web. Note setting user before publish.

[@GAUTAMKUMAR-ni1xs]

Xuan Ky Automation Thanks for replying Process is looking easy and I am also doing the same thing as shown in your video. 1.Created a user in Wincc server for web client as I am running a separate client project. In this server, web navigator client is installed. I have also copied pictures(in project folder) which I am publishing in web client project using server data of this server project. 2. Created that same user in web client. Enabled web navigator option in user and group. 3. Successfully published pictures. 4. Configuring web page using PC IP (port 80) 4. Getting client project online. 5. IIS featuring. 6. Adding configured IP in Trusted sites. Still neither getting web site online in IE nor in WinccViewerRT. NOTE- In WinccViewerRT, it is showing "Unknown username or bad password", it means it is getting connected to server but not taking configured user in User administration. Kindly help. If you can share you email id, I shall share you some screenshots for reference. Thanks in advance.

[@XuanKyAutomation]

Hi my friend, for configuration web server and client please follow my video below 1. kzbin.info/www/bejne/iJOac5iPdrujY7M 2. kzbin.info/www/bejne/opXckJWafKibqrs No2 is clients access through internet. No1. clients access through LAN Email: [e-mail]

[@nltdavid207]

DẠ, Em cấu hình SERVERS CLIENTS như anh trên PCS7 có được không ạ .

[@XuanKyAutomation]

Được chứ e, pcs7 sử dụng wincc mà

[@nltdavid207]

@@XuanKyAutomation Dạ vâng anh.

[@ngocsonchu9431]

Phần connet profect trong simaticshell em ko interconect đc thì là do sao ạ

[@XuanKyAutomation]

Do Ban chua cau hinh mang LAN duoc

[@duyngoc2145]

Anh ơi, em tạo giống vậy nhưng khi máy client truy cập vào đường dẫn của project thì nó không hiện lên System login mà nó lại hiện Dialog: Server not available. Anh có biết tại sao không ạ. Em cám ơn anh!

[@XuanKyAutomation]

bạn dissable phan mem diet virus , co the firewall bi kiem soat antivirus, sau do disable luon window fire wall nhe. nếu ok báo anh biet. A se chi buoc tiep theo. chu y disable vius soft ca 2 máy nhé.

[@duyngoc2145]

Em dùng máy tính khác làm client thì được rồi anh ạ. Em cám ơn anh nhiều nhé.

[@XuanKyAutomation]

OK em

[@AnNguyen-gx9ip]

Anh ơi, em tạo giống vậy nhưng khi máy client truy cập vào đường dẫn của project thì nó không hiện lên System login mà nó lại hiện Dialog: Server not available. em cũng đã tắt window fire wall luôn rồi mà vẫn không được ạ Anh giúp em với Em cám ơn anh!

[@XuanKyAutomation]

An Nguyễn , e vào kênh của a, đăng ký share giúp a. E tìm video có tên "solve problem wincc server is not available "

[@XuanKyAutomation]

kzbin.info/www/bejne/hIm2fGSMndKlrrc Xem Video nay ban nhe

[@AnNguyen-gx9ip]

@@XuanKyAutomation em cảm ơn anh nhiều nhé!

[@AnNguyen-gx9ip]

@@XuanKyAutomation anh ơi! em để máy thật làm sever còn máy ảo làm client thì OK! Nhưng khi em đảo lại máy thật là client và máy ảo làm server lại không được ạ! Nó báo lỗi: "The configured server is not available. Do you want to open the project using the local computer as the server" ạ! Mong anh giúp em với ạ, em cảm ơn nhiều nhé!

[@XuanKyAutomation]

Hì em, tốt nhất là trong cấu trúc client sẻver em lam 2 máy là máy ảo hết nhé. Em copy máy ảo ra, sau đó sét lại Mac Àddress của máy vừa copy . Và đổi ten máy. Khi đó e có 2 máy. E làm tren 2 máy ảo. Chú ý, 2 máy tren phải có user năme và pass giống nhau.

[@vorapobautomation9760]

Do you have PLC Project ?

[@XuanKyAutomation]

This project used internal tag of WinCC, So you dont need PLC Program. I make as easy as possible for you to understand. for further project you need program PLC and get tag from PLC or from OPC Server

[@ducbui1833]

nếu có nhiều client cùng tên thì làm thế nào ạ

[@XuanKyAutomation]

Bạn hỏi câu này để làm gì nhỉ? Nếu có 2 máy cùng tên thì bạn đổi tên máy kia đi. trong mot PC Station cua hệ thống SCADA không ai đặt tên máy tính giống nhau và đồng thời 2 Địa Chỉ IP ko thể giống nhau được cả bạn nhé. còn nếu muôn thực nghiệm thì bạn nên tự làm xem sao.

[@ducbui1833]

e cảm ơn, e hỏi xem có được k thôi, k được thì e đỡ phải làm. :))

[@khaliliali6939]

hello please you can help me send for me this Procedure

[@SureshKumar-nn2cf]

Hello #Xuan_Ky_Automation this videos is so helpful, but i have 2 server & 2 client. so pls guide me how to do it for 2 server & 2 client. thank you

[@XuanKyAutomation]

Suresh Kumar , check my video which have name" distributed multiuser servers clients " in my KZbin channel. You will know how to config multiple servers

[@XuanKyAutomation]

Share project drive.google.com/open?id=0ByqbBv_5_rI8cjZDTnhMa0lIMFk

[@rolandomartinez458]

Hi friend. Your videos are great. We are having problems with the Client. Client is conected and everything is watched but it presents error on every script that access sql data base. Can you light us about it. Thanks

[@XuanKyAutomation]

@@rolandomartinez458 , Hi Roland, I am actually busy and it is not easy to know the problem easily I think. I hope you can try to check all communication setting the same what my video showed. Wish you can solve the problem soon. thanks