winchester 1200/1300/120 ranger bent ejector pin fix
Пікірлер: 29
@nakoawarrior3186 Жыл бұрын
After he said bent pin,.....I looked and yup mine was bent,....first I looked at the other end,....the ejector had a spot worn on the receiver and it didn't match the ejector till I bent it straight. And then it was perfect. Great info.
@tedfritsch33405 жыл бұрын
Thanks for the video, I have a 1979 winchester (bought it new) 1200, damn, I'm getting old. Cleaning it today, and low and behold the bolt won't come forward. Looking into the bent pin thing.
@brandonmatz98327 жыл бұрын
Thnx; great video. I just bought a model 120 Winchester, by the looks of it I knew it was an older gun so for $250 and I wanted a 12 gauge long gun for trap and alround bird duck goose turkey whatever.. haven't picked it up yet but looking at all these youtube'r videos on it I know now that it was a good pick plus I know Winchester is a good well made product.
@youtubeaddict4374 жыл бұрын
Hey man thank you so much. I just got my new shotgun and I wondered why it wasn't ejecting. Turns out this was the issue. Thanks!
@volkswagenbobby946 жыл бұрын
I cannot find a single video online of anyone on the web posting a video of replacing the ejector pin. Please help me out brother.
@jordangraves76764 жыл бұрын
Hey I have a winchester 1200 and it will not cycle shells after fired. Can you point me in right direction thanks
@volkswagenbobby946 жыл бұрын
My ejector plate won't stay in place. The ejector pin itself looks slightly bent and slid out of place a bit. I paid $75 for it. The parts are $45 for the new ejector plate, a new ejector pin, and a new spring for the ejector plate. Can you post a video of removing and replacing the ejector pin?
@volkswagenbobby946 жыл бұрын
For $120.00 total between the shotgun and parts it seems worth it to fix. I have heard these old Winchester defenders are better made than newer 870s. The idiot before me used high temp black engine paint and painted the barrel and mag tube it's ugly but still seems worth fixing and reviving.
@technologic213 жыл бұрын
Is the pin supposed to sit at a straight, 90* angle, parallel with the receiver?
@DaPPlschamp33 Жыл бұрын
Your the man dude!!! Thanks for the vids!
@jamescampbell15304 жыл бұрын
Spartan765 very good video, are you still around on utube? most of these comments are very old, I have just discovered you and enjoy your video very much, thank you!
@usaneedsrevolution23378 жыл бұрын
hey, i have the 1300 and for some reason the ejector arm keeps coming loose and preventing me from cocking. What do i do to fix this issue? then pin is not bent.
@Aleks9x1911 жыл бұрын
Sweet video
@boomlightsout14 жыл бұрын
yeah ive heard nostril shots are pretty lethal
@toddkilby52754 жыл бұрын
I like the 1300 but are they as durible as the Remington 870 ? Can they last as long?
@Boogiethrash13 жыл бұрын
Hey man I got a ranger 120 the ejector is cracked. So can I purchase the 1300 ejector for it? Thanks, Good vid by the way
@dopefish9312 жыл бұрын
are all stocks and barrels interchangeble betwen the 2100/1300/120 series?
@gavelboy019 жыл бұрын
Show one on magazine tube removal for the 1300. Is it press fit or screw in type? I want to modify my 5 shot to 8 shot.
@John45664428 жыл бұрын
+gavelboy01 You have to drive the magazine tube inwards, with the cap on. Then remove the feed throat/throats. Pull the tube outwards and align the splines. Then use a slide hammer to remove the tube from the receiver. Place your new tube in place and align the splines on the tube with those in the receiver. Screw the magazine cap on the end of the tube. Drive in the tube into the receiver and install the feed throat/throats on the mag tube. Align the spines and use a slide hammer to pull the throats and mag assembly into place.
@bad68x8 жыл бұрын
My ejector pin is gone can it be replaced? Thanks
@CCFIFresno5 жыл бұрын
I was questioning for a second wether you were being sarcastic or not and of course you were. Just pound it, if as a guy you ever doubt anything that's your answer. LMAO....
@haydenbolus20525 жыл бұрын
Is the pin supposed to be perfectly straight?
@DobermansRock12 жыл бұрын
@spartan765 Winchester made the best shotguns all around. Benelli who are they? Bunch of over priced wanabees. Oh and the 870 can go into the outhouse too. Give me a 1897 a 1957 or a 1200 and 1300. Winchester made the best scatter guns.
@ARC333311 жыл бұрын
i have a 1300 defender and mine doesnt have this pin an it doesnt look like it ever did?
@volkswagenbobby946 жыл бұрын
Some defenders don't have a pin from the factory..some do mine does and I can't get the ejector plate to stay. My pin looks bent. Paid $75 for the shotty. So 45 bucks in parts seems worth it to fix. Will be a pita but i enjoy challenging projects