Winchester SX4 VS Beretta A300 Ultima | WAS I WRONG!? | Shotgun Showdown

[@TargetFocusedLife]

To be clear, my issue isn't that you can't put it on safte once the trigger is pulled and the firing pin is not reset, my issue is that the trigger doesn't always reset. Sometimes you shooting and you go to shoot a second shot and wen you pull the trigger it is like it was never reset. There is definitely something messed up with the trigger.

[@allyourbase12]

That sounds like the bolt is short stroking and not pushing the hammer back to reset. Not broken in/low recoil ammo/dry action maintenance procedures should do the trick.

[@rudyelizondo1935]

Can you send it back to beretta for repair? Hopefully they can fix the problem?

[@TargetFocusedLife]

UPDATE: After taking the trigger apart it appears that the hammer is out of spec and because of that, the trigger doesn't always reset as it should. This gun will be going back to Beretta 🙁

[@TargetFocusedLife]

@@allyourbase12 No, it is not due to short stroking. I can replicate the issue by running the action by hand. The bolt comes back and resets the hammer, but because the hammer appears to be out of spec, sometimes it creates rubbing inside the trigger mechanism and the trigger doesn't click back forward. I am no expert when it comes to the internal working of triggers but I can see the crooked hammer is creating issues.

[@TargetFocusedLife]

@@rudyelizondo1935 That's what I am attempting to do now.

[@Pericles_Karagiannides]

My friend it's not an issue, this is the way it works. If you pool the trigger and it's empty the safety is not moving. I had the al 391 urica gold and it worked the same way. The most Beretta shotguns have the same trigger mechanism.

[@TargetFocusedLife]

Correct, that is not the main issue although I didn't notice that before. The issue is that the trigger doesn't always reset after a shot. 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@EasternMountainHunters]

I love my SX4 hybrid hunter it’s chambered up to 3 1/2 in and it’s been a dang good gun no cycle issues no problems with the gun used it deer driving, Turkey hunting and dove hunting and it works great in all conditions without fail!

[@TargetFocusedLife]

Thanks for sharing your experience my friend 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@BradinManheim]

I admit I don't understand your fascination with the 3 shot speed shooting event you do. Doesn't prove anything useful to me.

[@ttmysticz]

I got the A300 after your initial video, and it's been flawless for several hundred shells right out of the box. Mostly light target loads but the heavy stuff shoots great aswell. Very happy so far.

[@TargetFocusedLife]

That is awesome to hear. My hope is that anyone that bought an Ultima based on my review doesn't have issues. 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@jsagazio]

Me too.

[@monstermash479]

ive gotten 250 shells (target loads) through my a300 ultima and thankfully havent had any issues yet. the ergo on the gun is just absolutely amazing and im glad i bought it. i hope that because its a common issue it will be fixed

[@johnrobinson2113]

I have a A300 Outlander that I’ve had for 3 years. It has about 1500 rounds through it and has been flawless since day 1. Yes, if you dry fire it without resetting the firing pin, you cannot put the safety on. Once you reset the firing pin, you can put the safety on. When you fire you last round, the chamber should stay open and the safety will work.

[@xxpuballstarxx1043]

I also have the a300 outlander that I put extended controls on and I've had the same experience, never fails to go bang, and its probably one of the best shooting guns in its price range.

[@MrPoopyHeadd]

Also had the a300 outlander and never had any issues. It's been abused and still shoots like a dream.

[@panfishfanatic1055]

I also have an A300 Outlander and have had it for several years. Put tens of thousands of rounds through it and no malfunctions. I hope Beretta can fix the issues with the Ultima because I’d hate to go with a different brand

[@santocaus]

What’s the difference between A300 Ultima and A300 Outlander???

[@pawpawcotee]

@@santocaus The ultima has factory added over sized bolt handle and paddle release.

[@WolfR8]

I'm a little late to the party here but is anyone still having these issues with the current A300s that are circulating or did they fix it now? Debating between the SX4 and A300 for my first semi auto and wanna make sure this isn't still an issue.

[@allyourbase12]

That's how a cross bolt safety works... It blocks the hammer from moving forward when its cocked. When it's down, the hammer is locked in that notch. Also, if the hammer is down, the gun is safe. It's got nothing to do with the firing pin, and everything to do with the hammer.

[@allyourbase12]

Also, the SX4 is now better because your custom built and configured speed gun beat a factory field gun? That makes sense.

[@TargetFocusedLife]

I realize that safety cannot go on after the trigger is pulled, that is not the issue. The issue is that the trigger doesn't always click back forward after the hammer has been reset. After taking apart the trigger is apparent that the trigger (hammer) is out of spec and causing issues. There are a lot of folks having the same issue.

[@TargetFocusedLife]

@@allyourbase12 The SX4 is a factory gun. The only changes were cosmetic.

[@ehrengross]

I got one under a year ago and throughout hunting season and a lot of clay shooting, the gun has never had any cycling problems, never even had a jam.

[@marknorman893]

I had the same issue with my beretta and was told it was a recall on the a 300 so I shipped it back to beretta and they fixed the trigger group for free have not had any issues with it since.

[@freedomfighter7630]

I laugh everytime you shoot the gun over your head upsidedown 😂🤘 , I've notice you don't blast stuff straight to hell 🤘 , it's more fun blowing up water jugs, pop bottles , etc . Can't wait till I own a semi auto shotgun, great video & thanks

[@seansvid]

Thanks for calling this out. Gun manufacturers need to take Quality Control very seriously. Safety is at stake. Not only that, it's not easy to return a defective firearm. The dealer can't take the gun back. And shipping a defective gun back to the manufacturer is a pain, and expensive.

[@todsimpkins8908]

I looked at the A300 Ultima and Win SX4. The shop had 2 A300 and 4 SX4. The fit and finish on all the SX4's was horrible. Like embarrassingly bad. I left with a camo A300. The trigger did not feel bad and the safety is where it should be. And both Beretta's fit and finish were perfect. You were not wrong. I wouldn't have paid $200 for those SX4's i handled today.

[@reddawng43x91]

I agree!

[@daleholliday3888]

I was considering the SX4, A300, Viper G2 pro, and CZ 712. After watching and reading several reviews, comparison videos, etc, I decided to get the SX4 (12GA Field). My son and I took it out for it's first day at the range and it performed great with 1oz 8 shot target loads. I was expecting some failures since almost everyone has mentioned that semi-autos have a break-in period. But we fired 100 shells (half 1180 fps and half 1250 fps) and had no ejection issues, only a few feed issues of the 2nd round, which all happened while my son was shooting, never happened to me. Maybe he loaded the second round improperly a few times, not sure. I'm very pleased with it overall. It swings comfortably and I'm sure is much more accurate than its users. (Although this was his very first time shooting a shotgun and he broke well over 60% of them off a pedal thrower which I thought was pretty impressive!)

[@paytonadams2452]

I have the beretta a300 outlander and haven’t had an issue in 3 years and I use it as a waterfowl gun and am not easy on it. This gun has been fully submerged in saltwater. Cleaned it when I got home and never a problem and it’s been a year later. Just yesterday I shot 4 for 4 at some divers. Best shooting gun in my opinion. For the price it’s the best gun on the market.

[@TargetFocusedLife]

Thanks for sharing your experience and your thoughts. Many are having issues with the Ultima. I took my trigger group apart and it appears that the hammer is out of tolerance. Not sure what they changed with triggers between the Outlander and the Ultima.

[@DrDuckMD]

I have not had any issues with my franchi. Though, when I pull the trigger and do not retract the bolt. I cannot engage the safety. I think they're designed like that.

[@mameochana8262]

I ended up going with the sx4 due to the 3.5 " shell capability......0 Regrets lol... it handles like a dream.

[@ICECOLDOUTDOORS]

I have an SX3 I use for waterfowl and upland hunting. My cousin has an SX4 and we have never had any issues. They might not be the most fancy with all the bells and whistles, but they go boom every time.

[@ad-bk9bo]

I have an sx4, sold my b eretta upland special. I HATE the loading.

[@crossbowhunter9118]

Thank you for narrowing down my choices. Now I will definitely buy a sx4 was thinking about the ultma but not now. Sx4 it is

[@bhoutdoors1783]

I have a first run SX4. The pins are a little lose now and the charge handle has never came out but is definitely loose, despite that it is by far my favourite gun way better then my beretta I’ve put thousands of rounds and killed lots of birds with the Winchester and have never had a shell jam best gun for the money imo.

[@TargetFocusedLife]

Thanks for sharing your experience. The first runs of the SX4s did have an issue with the bolt handle falling out but that has long been fixed. 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@naytrain_actual]

I found your channel I think three days or so ago due to looking into the latest shotguns and man, I have basically binged your channel at this point! You have a great attitude and get right to the facts with firearms in great quality so what more could we ask for? Can't wait to watch the channel grow :] Also, think we will be seeing any Mossbergs or Remingtons anytime soon?

[@bartito15]

Unfortunately, still haven’t received it back from Beretta. Coming up on 8 weeks now. When I get it back…I’ll let you know if the issue is fixed. Enjoyed the follow up video.

[@zachgraves4549]

Came really close to buying the Ultima last week. Went with a Franchi Affinity Elite instead. Couldn't be happier with my decision.

[@talisikid1618]

Never had issues Beretta.

[@justinbirch8283]

It wouldn't be an nearly as big of an issue if they responded to customers and fixed issues in a timely manner. Thank you for warning people about the issues. I have been doing the same because their customer service is entirely unacceptable.

[@TargetFocusedLife]

Thanks for sharing.

[@moseskinsey2890]

There's nothing wrong with the A300 that's how all good guns are made. It's a matter of being smart enough to know how to use it. Most guns are made so you can't put the safety on if it's not cocked. Never had a problem with mine because i understand how good guns work .

[@jcrsa]

In the first version of the Maxus you can put the safety on if it's not cocked, but if you force to fully open the bolt you need to apply a lot of force and you'll bend a piece inside the trigger group, and you'll have problems after that. Better not be possible to put on the safety without being cocked, than to be possible and damage the trigger mechanism when opening the bolt for the first time with the safety on and the trigger still uncocked.

[@jordantzoras4010]

I have both of them, excellent gun's, Beretta a300 wood and sx4 s.magnum , different philosophy but very good gun's both of them. my hello from Greece!!

[@TargetFocusedLife]

Very cool. Greetings to you!

[@paulhopkins1905]

My AL391 Urika does the same thing with the safety. Gun unloaded, uncocked, and bolt closed, the safety doesn't work. It works when cocked. Beretta designes them that way

[@rudyelizondo1935]

Thank you bro, I almost bought one, I am going to buy the A400 xplor model. I appreciate you doing this video.

[@roberthealy9389]

Hopefully with another trip to the range this week I will have better luck with my new A300 Ultima than its first outing!! Failure to eject and like the one guy said basically a single shot. Not what I wanted in my first 20 gauge semi-auto.

[@zach1778]

Two years later has this been addressed? From what I can find it’s not a huge issue if one at all but I love the fit of the a300.

[@halfdollar86]

I think the SX4 is just hard to beat for the money. I wish we had more gas guns on the market. I would really love to see Remington bring a new modern features 1100 to market.

[@Rydeman2]

If they brought out one with no O ring they would be a huge hit. The old 1100s are sweet. The O ring is the weak link in the design.

[@upinair4990]

If the continue making the V3 in the future, it is an amazing gun. Have 3 lol

[@omarchavarria2675]

Im a little bias to winchester so I always gotta go with the sx series

[@willgiglio235]

I have the A300 Ultima 20g and the safety thing is factory stock it only moves when the chamber is closed. At least for mine.

[@patrickorr1932]

Glad that I just purchased the SX4 now that you’ve brought up the issues with the Ultima. Aesthetically, I really liked the finish out of the Ultima and was still thinking about buying one. Thanks for the info and disclaimer.

[@TargetFocusedLife]

Contrats on your recent purchase! Can't go wrong with the SX4, although, to be fair, they had some issues to when they first came out.

[@forcemajeur.5138]

I know newer guns people do it, and you are more of an expert than I, but all the old timers and guys who taught me how to hunt always told me to not dry fire guns, especially shotguns. Now this was a long time ago so maybe it doesn't matter.

[@TargetFocusedLife]

Most modern shotguns are okay to dry fire. If I was going to do it hundreds of times I would consider using a dummy round aka snap cap. 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@forcemajeur.5138]

@@TargetFocusedLife I wasn't criticizing, I was just sort of commenting on it. I see a lot of people dry firing in videos and it always makes me wonder if its not a big deal anymore with advancements in technology and builds.

[@brianmiller2739]

Plus the a300 stove piped over the head shooting ..which turned me.off from it in the first video....the SX4 is an excellent gun have researched it from many other videos as well....its with the maxus. 2 Browning...3 major reasons why ..its speed ...it doesn't stove pipe over the head etc... and has better ergos...with less gimmick

[@lukegafa3063]

I am beretta fan i just bought a400 xtreme unico but i have few issue double firing and shell lifter dobt work fine after some dirty. After few years i decide to bougjt browning a5 3.5 and i prefer it more !! Lovely gun a5 stalker

[@jeffpriest8652]

Found an SX3 at a pawn shop today. Heard mixed reviews on it. Anyone have any experience with one?

[@markrzepkowski2951]

Heard everyone say stay away for SX4 due to the charging handle falling out along with other issues

[@nickbenson9710]

No doubt some issues will reveal themselves when releasing a new model, however its not an every gun problem. i've had mine a few weeks and have put hundreds of rounds From different manufactures and even the light bird loads cycle no problem. I've been extremely impressed with my a300 Ultima and for the price point would absolutely recommend.

[@TargetFocusedLife]

Well said, Nick. Glad you aren't experiencing any issues. 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@frog6215]

Im just say my berreta a300 ultima works fine out of the box and already put alot of rounds through it and idk cause alot of people have no problem

[@jletsfsu]

Same here man. I’d hate to jinx it but its been smooth sailing for me

[@nickhess2425]

Same I got mine for Christmas and put several round in it and nothing wrong has happened yet not even a jam

[@bmd1825]

They all at one time or another get ahead of themselves trying to put out the “ Latest and Greatest “ and over look some things in the process. Look at the automotive industry, heck there’s a recall every 6 months for something or another. Remington’s A5 has been a nightmare for them as well. I run a SBE3 and have owned an A400, their both some of the finer guns and no issues with either.

[@MrSassle]

I bought a beretta a300 ultima and it wouldn’t cycle rounds at all so I returned it and bought a Winchester sx4 and couldn’t be happier

[@jorgecrespo6182]

Beretta a300 última es excelente escopeta. Saludos desde Puerto Rico.

[@browningmaxus5360]

Excellent for a scrap dealer

[@Mahdistaa]

Would like to see different comparisons not just how fast, for example impact on targets on longer distances + 2 3/4 shells.

[@raefordwall8869]

I purchase an A300 Ultima in August 2021. Ran several boxes of bird shot through it shooting sporting clays with no problem and I really liked the gun's performance. Took it on a hunting trip to South Dakota in October and the problems started. The trigger failed to reset the first day and I thought it was a shell recycling problem, but after cleaning it and having the gunsmith at the ranch exam it, we determined that it was a trigger problem and cleaned those parts. Next two days same problem with the trigger failing to reset causing me to miss second shots on about 5 birds. I called Beretta (took 3 days to get through and they never responded to my email) and the rep said that she would send me a new trigger assembly or I could send the gun back for repair. I opted for sending the gun back, not wanting to botch the job trying to do it myself. Hopefully I will get it back before next fall for my next hunting trip.

[@TargetFocusedLife]

Super frustrating...It took them weeks to get back to my email, but I was able to fix the issue myself.

[@nickborges2048]

I got lucky and got a ultima a couple months ago and have had zero issues

[@calebchampion3244]

I recently bought an sx4, having trouble with the 3rd shell stayin in the mag tube, it will shoot the first two shells no problem, it has done it more times than not. Any advice on this issue?

[@Woodsguy]

It's pretty normal for firearms that the safety won't engage when the hammer is down. when you have a live round left in the camber, the hammer is cocked and your safety works. when you drop the hammer on an empty chamber, the safety has no use anyway since the chamber is already empty. With a lot of handguns, the safety won't engage when the hammer is down either. It's normal.

[@hercules0378]

Bought the a300 ultima. Shot 2 rounds and had a failure to eject. Cycled the weapon and the next shot fired but charging handle came out. Being a left handed shooter, it hit me on my right cheek. Had problems with 1st 15 rounds. Fired my remainder 85 rounds with no problems . Have another 125 rounds with no problems.

[@TargetFocusedLife]

Thanks for sharing. Glad our Ultima is working well for you 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@tuckerbarry2010]

Are you shooting the sx4 in the 3.5 version?

[@bubbacole1657]

I commented on the 2 gun comparison video and said than the Winchester Super X 4 is by far a better quality gun..

[@BehindTheGoldenCurtain]

Any opinions on the Stoeger M3K 3 Gun?

[@johnpa9326]

Unfortunately, any new design has teething issues. However, I thought the Ultima was an updated Outlander. I’m sure they will resolve the issue in short order. Also, most designs won’t let you put the safety back on when the hammer is down so that’s not a concern at all. I love my Outlander and definitely think the claim of it being the best value SA holds true.

[@AamirKhan-pn2qb]

I purchase sx4 or Ultima? Please tell me your experience sir

[@chaddoney8068]

As always great review, I have my picks narrowed down to the SX4 and the Maxus 2. I would like to see a side by side review if you can to help make my desicion. Thanks

[@johnreed3838]

Would you use the sx4 for duck hunting or what would you use instead?

[@steveyd101]

When is Winchester going to make a shim kit for the SX4? That is the only reason why I didn't get one.

[@connorblake3324]

Do we know if the issue is resolved yet?

[@PatAllen-g5x]

Has the issue with the safety been fixed?

[@ivanhamlyn]

I bought a sx4 5 years ago and love it, but I do have one issue with it and that's when I shoot the big magnum 3 1/2 " the charging handle falls out

[@TargetFocusedLife]

You must have one of the early SX4 shotguns that had that issue. You can send it in and get a new bolt for it.

[@ivanhamlyn]

@@TargetFocusedLife thanks so much

[@roblacitinola866]

Doode, awesome vid as always, very helpful!!!

[@lynnanderson2683]

Hard to say you were wrong when the troubles don't show up till later

[@jklo1313]

What’s the deal between the $500 sx4 and the $1200 ? Looking at it for waterfowl.

[@robjensen9351]

So….i just bought the same gun….did exactly what you did and I cant put the safety on. I did the same test on all my other shotguns and the safety works after dry fire. Is this a beretta thing or what??

[@YouTubeCensorsAndSuppresses]

It’s like a Ducati vs HD or Suzuki. One may be a beauty, but if it don’t work…

[@cameronplauche2621]

How about you do a Browning Silver vs SX4? Silver is easily the best most Reliable gun I’ve ever shot!

[@MikeWeidner-g7z]

Don’t buy a Beretta unless you want poor customer service and problems. Bought one from gunbroker a few weeks back, and it’s clear they have extremely poor quality control! Out of the box the rib had a large metal “booger” on it along with a small gash. The dip doesn’t look well done, there are several areas where it’s not covered. Even better, the front pin was “tightened” sideways and will not tighten in alignment. To top it off, their customer service doesn’t return emails. I haven’t shot it yet and am considering not even bothering so that I can trade it on something that isn’t a lemon. For comparison, my SXP, which I bought as a “beater” before duck season, has had zero flaws-a 250 dollar, Turkish-made pump is higher quality. First Beretta…Last Beretta.

[@reddawng43x91]

Bro! That’s the way it works! It’s not a flaw

[@brodeelerwill4140]

Do the same brand do the top guns of browning the A5 and the Maxus 2

[@bmd1825]

I own several shotguns ( SBE3, Winchester SX3 and SX4, A400 and a Versa Max) . The Winchester’s are wicked fast as far as a duck gun, they all are for the most part. I’d give the nod to the Winchester’s over the A300 and not feel bad about it.

[@juan_ctzz]

I’m looking at the Winchester sx4 and the beretta extreme plus which one do you advise. I’m a short guy at 5’6 with short reach so don’t want nothing heavy or with too much recoil. Also with good reach to the trigger

[@bmd1825]

@@juan_ctzz - my preference between the two would be the SX4.

[@sprayandprayhunting5711]

The best bro love them ❤️❤️❤️

[@dieselten01]

Yes you are wrong. The Beretta safety can not bet set if the hammer is not cocked. Hamer must be cocked. Gun is working just fine. I have to think that Winchester got mad at you after giving you all those sx-4’s.

[@TargetFocusedLife]

I realize that safety cannot go on after the trigger is pulled, that is not the issue. The issue is that the trigger doesn't always click back forward after the hammer has been reset. After taking apart the trigger is apparent that the trigger (hammer) is out of spec and causing issues. There are a lot of folks having the same issue.

[@pookiemonkey1474]

Dieselten, did you even watch the video. That’s not normal. My Beretta does not do that. It’s obvious something is out of spec.

[@1148bucknasty]

Watch the video you troglodyte

[@oldmanmtb6202]

Love your reviews! Do you ever see yourself reviewing Over/Under shotguns

[@TargetFocusedLife]

Glad you are enjoying the reviews. Thanks for watching. Yes, I 100% want to start reviewing break action shotguns, I just chose to start with a heavy focus on semi-autos.

[@robfoli3874]

How fast you can run the gun has nothing to do with the overall performance and function of the gun or even a good basis for discussion. All modern semi autos will work fast enough for clay or game shooting. All Beretta semiauto safeties can only be applied on when the gun is cocked. This is regardless if the bolt is open or closed but it must be cocked ( hammer back) Now IF there is an issue with trigger / hammer not resetting after being fired and gun cannot be fired then this is a malfunction and it should be sent back to Beretta. My two cents.

[@TargetFocusedLife]

How fast I can shoot has a lot more to do with my observations of mount-ability, swing, recoil, and trigger than it does speed. The reason I speed shoot is to put the pressure on. When you shoot slow and easy, it is a totally different experience. I learn so much about a gun speed shooting. Many Ultima owners have had trigger issues. I fixed my issue with a new hammer. Beretta also sent a new trigger group since they know about the issue. 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@samcarter1141]

Oooof, I just ordered one yesterday ... heh fingers crossed

[@TargetFocusedLife]

I hope you get one without issues. Mine didn't have the trigger issue (trigger doesn't reset after gun cycles) right away and it doesn't do it all the time but when it does, it is super frustrating.

[@russfunk1729]

Bought one after watching your review, never again, completely disappointed with it.

[@Systemaman]

Is this why they made the A400?

[@404outdoorsofficial]

Do a A5 and Maxus 2 comparison video!!

[@moseskinsey2890]

Yes that's how almost all guns are made. if the gun is not cocked it will not go on safety every AR 15 is like that too.

[@brhanabd810]

How much is the price?

[@jaredwhite489]

You can’t put a safety on not cocked semi automatic 12ga. That’s normal

[@Redneck_Engineer]

It's been a year and a half now - did Beretta fix your issue?

[@bilalhamiti2328]

hey man did you recomend me to buy a sx4 upland field.plz respond me

[@TargetFocusedLife]

I reviewed that shotgun, here is the video studio.kzbin.infosolvvf9CG0I/comments I like to put the info out there and let you make a decision. Let me know your thoughts.

[@yeeyee_ccj5357]

Sx4 best shotgun I have ever held close to the browning wicked wing 1

[@jasonbeary5771]

Based on a few very experienced shotgunners, Beretta has done about everything they can to lower the both component quality and the materials quality. If you get one from 25 years ago, it'll be tip-top. Now, .... yeah... NO.

[@TheCenturion8404]

That’s the way a trigger safety should work.

[@ВладимирШвед-ц2п]

Добрый день Стив! Спасибо, что вы делаете такие видео! Это очень поучительно! Владею А5 и очень доволен, хотел бы приобрести винчестер sx, но к нам в Россию перестали поступать и браунинги тоже! С уважением к Вам Владимир!

[@automandan]

I love ❤ the look and feel of the Beretta A300 so the Ultima will be even better. However with the issues of the trigger group plaguing the new Ultima I'm sorry to say that I'm going to have to go with the tried and true Winchester sx4. Now I'm sure that Beretta will eventually work out the kinks on the A300 Ultima and the gun will be awesome. However when I buy a gun I need to know that the gun is working without issue. Not to mention the fact that the Beretta A300 line has been out for years and this gun is just another variant of the A300 and yet they still can't figure out the trigger group assembly calls into question their Quality and control. So until then the Winchester sx4 gets my vote.

[@TargetFocusedLife]

Solid logic. I agree. I really liked the Ultima but if I was going to buy one, I'd need to know the trigger issue is fixed.

[@TheFmazz]

Not wrong, just the design of the cross bolt safety

[@allisb2003]

I think you are very wrong in your comparison of the SX4 against the Beretta. I didn’t try the Beretta yet. But must say, all the things your SX4 can do, the SX4 that I have been able to shoot, can’t do any of the things your SX4 can do. If I shoot 24g ammo, it doesn’t repeat at all from the shoulder at all. 24g is used in international competition, so I can’t just change. So for me SX4 out of the box is crap. Maybe you use heavy load ammo or a special made SX4 by Winchester or you. But out of the box it’s useless. The Beretta A400 shoot everything you put in it, Even 21g. Next time you compare, please be more objective. I love watching your videos, but in this case I think Winchester might influenced you a little since it’s your show gun.

[@calebchampion3244]

I have an sx4 that’s 1 week old, more times than not, the 3rd shell stays in the mag tube. Also, when it does happen to shoot all 3, the bolt may or may not lock back. Really aggravating when you spend $1000+ on a gun that may or may not operate correctly

[@seansmith5082]

No shit! My AR does the same thing. But what if I want it in safe when it's completely empty and decocked??? Lmao

[@unclebob870]

Not wrong, just an incomplete review. Nice follow up!

[@71105bf]

I have the a300 ultima in 20 ga and it has been flawless for over a month of duck hunting abuse.

[@Motomurphy]

Well glad to know it's not just me...

[@hmjt21]

a400 upland's safety works the same way.

[@TargetFocusedLife]

That is interesting, I hadn't noticed that with my Beretta's. That wasn't the real issue, just an observation. The real issue is that the trigger sometimes does not reset after the the gun cycles. It is like the trigger gets stuck for a while and then it will eventually click back and be reset. Frustrating! 👊 Stay Target 🎯Focused (Hebrews 12:1-3)

[@williegeorge905]

My A300 has no problems People gotta have some to complain about 😏

[@anthonyrussomanno1540]

Just not a beretta fan I have had 2 ejector problems both times called beretta warranty is non existent terrible never again

[@bigdaddys73nova]

my SX4 is solid not a single issue

[@coskier1969]

A300 tactical fired thousands of rounds without a hickup, eats everything.