Here's how you disassemble and reassemble the Winchester SXP Defender in 8 minutes flat!
Пікірлер: 211
@jefff38864 жыл бұрын
I just ordered this gun last week and picked it up this morning. This is my first shotgun. I stripped it down easily thanks to your video, cleaned it all up and put it back together. Everything seems to work smoothly, and in a little while I'm going to find out. I'm about to step out the door and head to the range for my first shotgun practice. Thanks again!
@bandofbrutes10864 жыл бұрын
Congratulations!
@MrTetsaga Жыл бұрын
shouldn't you oil it back after cleaning it? Also should we clean it right after buying it?
@KillaMurda1871 Жыл бұрын
@@MrTetsagaYep. It's best to clean your firearm when you first get it, this way you can clean off any anti-rust oils put on at the factory. Oil it after cleaning, not a lot, just enough to coat moving parts with a thin film of oil/lubricant and you should be good to go.
@theresad69903 жыл бұрын
Thank you for the slow and methodical demo. It was very helpful. I will be watching again as I disassemble my new SXP Extreme Defender for the first time so that I can familiarize myself with all the working parts before I take it out for the first time this weekend.
@bandofbrutes10863 жыл бұрын
Happy to help, Theresa. Congratulations on your purchase!
@laughingram72874 жыл бұрын
There was a couple times when what you were doing was not in the view of the camera. However, it was a nice and clear demonstration. Thank you!
@bandofbrutes10864 жыл бұрын
Thank you. I appreciate that.
@KillaMurda1871 Жыл бұрын
This video was very helpful, I found your explanation, pacing, and attention to small details very informative. I'm going to start cleaning and assembling my SXP with your video as reference. Thank you!
@tomtalbot3769 Жыл бұрын
Great video! The detailed explanations really help. As other viewer noted below, I'm now confident in tear-down and reassembly.
@rickindurham21 күн бұрын
"You'll shoot someone's eye out" I just had a flashback to Christmas Story 😅
@davidtruglow73813 жыл бұрын
I have the long barrel black shadow. Wish you could swap out the tube so to accommodate the 18" barrel. Great vid.
@barrelroll17424 жыл бұрын
I just bought one of these shotguns and this video is by far the best and informative, especially with the bolt as I was considering that to be the most difficult part but you made it all look easy. Now will go into this procedure feeling very confident. Thank you sir!
@bandofbrutes10864 жыл бұрын
Thanks for the kind words, Marc.
@maxtm30003 жыл бұрын
same, just picked one of these up a little while ago and this was exactly the video i was looking for
@donaldcassidy1592 Жыл бұрын
Ditto DC 73+ CANCER fighter
@tienkami3 жыл бұрын
I just realized this is not even the gun I have and yet it helped me put mine back together.
@miraclemaxlife2 жыл бұрын
I always appreciate videos like this-easier to follow than owner’s manual. Great job!
@noneyabusiness45642 жыл бұрын
Thanks for the help. I'll check out some of your other videos. Unfortunately my SXP Trench is broken. The slides broke. I have to send it to Winchester to get it fixed.
@christoFlair777 Жыл бұрын
Excellent video!!! Well explained and shown. I just got mine in couple days ago, in green cerakote 🤓😎
@ShadowNTheWillow3 жыл бұрын
That firing pin is still safer than realigning a Beretta’s spring to the firing rod. Flipping partner of mine forgot to lock everything in place. The top slide turned into the projectile. 🤣
@dr.stevenpennym.d.32414 жыл бұрын
Excellent video. Question, based on what I've seen, this is a very robust design. Durable. Would you agree?
@bandofbrutes10864 жыл бұрын
Thank you. 100% agree. You could say that the design is bullet-proof...
@dr.stevenpennym.d.32414 жыл бұрын
@@bandofbrutes1086 after a few weeks, I deem this product to be the best 300 bucks I ever spent. Thanks for your kind reply.
@bandofbrutes10864 жыл бұрын
@@dr.stevenpennym.d.3241 Glad to hear it!
@611Cowboy11 ай бұрын
I’m having issues reassembling, in particular the putting the bolt back in the receiver. It seems to be on the pump correctly but the guide rod is binding on the ejection port side. Did i miss something?
@greenlex5184 жыл бұрын
Can you make a video on how to clean and oil it?
@bandofbrutes10863 жыл бұрын
I'll definitely do that after I finish my tactical modification videos--thank you.
@jrossnjax74 жыл бұрын
Great explanation and helpful video! Thx
@bandofbrutes10863 жыл бұрын
Thank you!
@neosmith803 жыл бұрын
only thing i would add is what are the oil points before putting it back together? :)
@bandofbrutes10863 жыл бұрын
Thanks. I just may do that.
@elguapo7722 Жыл бұрын
Has anyone put a sling and bayonet on an sxp trench? I just bought one. I know its not the same but I'd like to try to make mine a pale shadow of the original. Work with what ya got right?
@NicholsDentRepair3 жыл бұрын
You should do like ASMR while your repairing or cleaning guns.
@yammomatta3 жыл бұрын
is this barrel going to fit a winchester 1300 defender?
@alo2162862 жыл бұрын
No, I don't believe they do.
@dougr26653 жыл бұрын
That was excellent!! Do you take request for other guns, say like the Glock 17?
@bandofbrutes10863 жыл бұрын
Thanks for the comment, Doug. If I had one, I'd do it in a heartbeat.
@Evergreen14003 жыл бұрын
Glocks are pretty much the pinnacle of tool less takedown weapons, all Glocks ere very easy to field strip and there are probably 5,000 videos showing you how to do it. I know this video on the SXP was awesome but there are already so many videos stripping Glocks it probably wouldn’t make sense for him to make one. Or maybe it would. I’m sure people would still watch it even tho there’s a ton of others
@o2begrn4 жыл бұрын
great video thanks
@pigpaul3 жыл бұрын
Great video,I seen one on the low. $$$. Should I buy it??
@bandofbrutes10863 жыл бұрын
Up to you. I can only say that I like mine.
@aviatorgamer30573 жыл бұрын
I went in to bass pro and bought this basically on impulse because they were having a sale.
@bandofbrutes10863 жыл бұрын
You're luckier than I am. I had to wait months--and paid full price (happily).
@thelegended21763 жыл бұрын
How do you take the stock off? That’s what I wanted to see lol
@bandofbrutes10863 жыл бұрын
I'll be exploring that soon. Check back!
@MrRambo10373 жыл бұрын
How long is the barrel?
@bandofbrutes10863 жыл бұрын
The minimum allowed by NFA : 18"
@gear59ok2 ай бұрын
tried to watch this but the dainty little gloves were too much..man up
@josephfenton7577Ай бұрын
He's a part of the blue man group, those aren't gloves
@williamphillip9749 Жыл бұрын
I’ll stick to American made not some Turkish prison made weapon
@natgilson4 жыл бұрын
Man, that was smooth... Very well done - thank you.
@bandofbrutes10864 жыл бұрын
Glad to help--thank you for the comment.
@toddkilby85824 жыл бұрын
I honestly don't understand why Winchester has not done better with sales over the years. I understand that they are made in Turkey these days. I always thought they where great shotguns. Maybe the best pump for the money. The ease of dissembly , and the rotary bolt . The best design out there IMO. Similar to the Benelli Nova.
@bandofbrutes10863 жыл бұрын
I hear you. The shotgun is extremely reliable, virtually indestructible and, assuming you can find one, quite affordable. As for it being made elsewhere, that’s just the world we live in...
@Magswap5 ай бұрын
It also doesn't help that they have a reputation for not feeding, especially with 3" shells.
@three-letterfriend58904 жыл бұрын
You have a very soothing voice. Like Bob Ross, but for guns
@bandofbrutes10863 жыл бұрын
Bob Ross just smiled.
@ahmetcelalkandemiroglu39314 жыл бұрын
Yes,thats it..Slowly,and calm explanations..Many thanks...Now I can disassemble my SXP...:)
@bandofbrutes10864 жыл бұрын
Thank you for that.
@enginakpinar19754 жыл бұрын
Such user-friendly and clear instructions. Thanks bro. I'm thinking of purchasing the 7+1 high capacity version of the SXP.
@bandofbrutes10864 жыл бұрын
Thanks, man. For the money, it's solid.
@donaldcassidy1592 Жыл бұрын
TY! DC your Kentucky native and current SOFLO cancer fighter who at 73+ feels safer and more knowledgeable. 1st pump.
@brunol.8608 Жыл бұрын
Just picked one of these up after my Maverick 88 shit the bed. Thanks so much for your informative, detailed video. People complain about tutorials being long sometimes, but understanding it better helps us do it quicker on our own end with practice. Great content.
@MizeryScratcher Жыл бұрын
winchester is said to have the smoothest pump action. i watch lots of gun vids im surprised dont see many winchester vids! mostly mosberg, remington. i had the 12 gauge 50 years ago with the win-chokes, had something plastic inside dont remember what, i traded it in for an ithica 12 g semi auto that was amazing.
@cyborg11174 жыл бұрын
nice video, thanks wish showed how and where to oil it if needed
@aarons39613 жыл бұрын
Beautifully done. You are a great teacher. Thanks for this. Only video on sxp I found useful!
@MD-ny1rv Жыл бұрын
Easier than mossberg
@wiara_jako_tarcza Жыл бұрын
i have a question for you, i got a bow tie for this shotgun, but i think its too small for this barell, how to put it on the barrel??
@MultiSweener Жыл бұрын
Revisited. Just did a disassemble yesterday. Thanks to you again for the post, your knowledge, and your professionalism. Your voice reminds me of Clive Owen in Inside Man. Calm and cool. Peace.
@kylefraga55502 жыл бұрын
I like how the bolt attaches to the action bars, and how the trigger assembly has all the internals clumped together. I run mossberg myself, had Remingtons in the past, but this looks like a slightly easier process.
@kathyluke8796 Жыл бұрын
Thank you! I'm a first time Winchester shot gun owner.... You did an excellent job of explaining how to disassemble and reassemble. Job well done!!
@brberealdad59774 жыл бұрын
Thanks so much! Just bought one yesterday and this video is a great resource!
@bandofbrutes10864 жыл бұрын
I appreciate that--thank you. Good luck!
@AcidTrvp6 күн бұрын
Would this be the same process for a Sxp defender extreme?
@RenelaranaRodriguez8 ай бұрын
Nice video I bought an SXP 20, it's the first one I've bought. I've always liked this thing about weapons and I never thought about buying one, but well, I'm an apprentice because of this, as I was assembling the barrel last night, I didn't want to get into it and I had a mess, watching your video. For the barrel to enter I have to remove the trigger group, is this correct? Thanks for the video...
@iamcondescending Жыл бұрын
"I don't like to put my finger in the trigger guard unless I'm firing." You litterally JUST checked it, and removed the barrel and chamber. I think you'd be fine.
@lakeimaging70623 жыл бұрын
You do a superb job with the explanations and video - THANK YOU!
@vikramgupta23262 ай бұрын
Tremendous video. Great detail. Thank you. Just ordered my SXP today.
@marchioneguitars Жыл бұрын
Very helpful and clear video, thank you.
@demondude10007 ай бұрын
How do you remove the extension ring for the slide arm? Im trying to replace the slide arm and i have nothing to break the torque
@davidfuertes1973 Жыл бұрын
I own a Stevens 320 that is a carbon copy of this firearm. Now I don’t believe parts are interchangeable but some are.
@xykane19 күн бұрын
wish you wouldve shown sliding the bolt back into the reciever
@zackerym62812 жыл бұрын
I’ve watched this what feels like a million times and my slide arms along with bolt slide doesn’t go back into the receiver what so ever like the video shows. What am I doing wrong?!
@antoniobaskerville6823 Жыл бұрын
Thank you this 💓 was very helpful. I'm thinking about buying 🤔 a winchester sxp.
@ronmcbride37688 ай бұрын
Ok nice but my model 2200 the barrel wont come off and the shell tube the slider wont move forward any ideas ?
@sg69629 күн бұрын
Excellent explanation. Thank you for this.
@LonnieThomas-v4s14 күн бұрын
Harris Daniel Perez Edward Smith Charles
@RD-gv7ub Жыл бұрын
is there any way to remove magazine follower plastic cap and replace it with phase 5 12 gauge?
@expectatiion Жыл бұрын
madein İstanbul/TURKEY
@ethanjohnson7153 Жыл бұрын
Mine jammed after 2 shots of law enforcement 00 buck the bolt got jammed in the barrel
@Desmond18674Ай бұрын
Does somebody know what chamber lengt the barrel has?
@TheDayVee Жыл бұрын
Is the triger group full metal or the housing of the parts is plastic like in maveric 88?
@arthurrobinson46446 ай бұрын
For whatever reason my safety won't go on unless the action is slid back
@jerrymatula4391Ай бұрын
very helpful. thank you for posting
@tmk246218 күн бұрын
bro best video ever, thank you so much
@granthumanoid30455 ай бұрын
I prefer the winchester 1300 defender over the SXP
@grb87610 ай бұрын
Very good instructional video, thank you 👊
@eskimo1000 Жыл бұрын
I wonder if its the same process with the Winchester water fowler 🤔
@michaelfabian24014 жыл бұрын
Good deal, thank ya sir!
@bandofbrutes10864 жыл бұрын
My pleasure!
@b.griffin3173 жыл бұрын
Does the magazine tube come out?
@alexdiersen4 жыл бұрын
The bolt is a little different compared to my 1300. Glad I watched such an informative video. Great job
@bandofbrutes10863 жыл бұрын
I appreciate the kind words--thank you.
@chrisburchett3018 Жыл бұрын
Best video on this gun.... Great job brother
@normlecouvie19212 жыл бұрын
i just cant get the trigger assembly to go back in, ideas?
@jackson_craft_gamingscates9324 Жыл бұрын
u didnt even take the trigger group apart......
@Morgusch4 ай бұрын
Very very good Video! Thanks 🙂
@iamhappyso9 ай бұрын
How do you get the bolt back in mine is stuck
@strikerfired6242 Жыл бұрын
Great video! Thanks for making it
@nathanruben33722 жыл бұрын
Do you have to remove trigger to take out bolt really?
@BugsBunny-zf7kn Жыл бұрын
Great video.. thanks for the info
@Behappy-tn3zr10 ай бұрын
Thank you so much
@leakedboss2 жыл бұрын
Thank you this helped alot.
@youriricher1123 Жыл бұрын
Very useful thank you !
@bigdawgsgottaeat405 Жыл бұрын
Thank you for the help!!
@joewest19722 жыл бұрын
Well done
@dennykurzawski3690 Жыл бұрын
Why must the safety be ON?
@mistertwister54793 жыл бұрын
great video....thanks
@vikramgupta2326Ай бұрын
The explanation of the firing pin/bolt/slide interface geometry was outstanding. Great camera angles. Excellent video, thank you.
@sski10 ай бұрын
Thanks, Brother! Got mine out of the box and the slide wouldn't move in either direction. Couldn't figure out how to proceed without taking it apart willy-nilly until I found your video. wish these gun companies would supply detailed instructions in setup. You covered it so thank you very much!
@michaelsteen34888 ай бұрын
great detail!
@normski2622 жыл бұрын
Thanks for that, very helpful for us knew to the 1300 defender!
@michaelboone56607 ай бұрын
Bought myself a Winchester SXP hybrid last month I am very pleased with this shotgun and thanks to your video I should have no problem cleaning it now excellent tutorial video thanks brother 😎👍
@joshhershberger93843 жыл бұрын
Amazing video
@DIRTDIVER8822 жыл бұрын
Sweet thx for sharing. My buddy just picked up an aluminum mag tube version of this today n fresh out of the box i pulled the forend out n the bolt came out of the receiver n for the life of me i couldnt get it to go back in. I feel like it was catching up on the ejector spring but then the bolt came off the rails n of course the f pin came out 🤣🤣 . But i feel like i could do it blind folded now,thanks again 💪
@70selvisfan2 жыл бұрын
Brought this exact shotgun home from Cabela's today. This video was perfect to help me strip it down and clean it. Thank you!!!
@Sanwizard111 ай бұрын
Thanks! You made disassembly look very simple. It would have been great if you included how you oil it up after cleaning
@fire1on2off Жыл бұрын
Well Done!
@Robertschannel-12 жыл бұрын
Great informative video. As i have just ordered my first SXP Marine Defender shotgun, i am looking forward to learning how to disassemble and reassemble properly.
@Nordic-bb8nw Жыл бұрын
Couldn't figure out how to get bolt back into the receiver after it accidentally came apart on me...Now I know...thank you.