Windham's Retro A1: Cigs Not Included!

[@adaman04]

Love him or hate him, nutnfancy is an OG.

[@georgestem2039]

Absolutely

[@springof-wf8vy]

Not only an OG but also a Master of arms

[@mountainguide7]

Verbose!

[@MrBackspace4848]

20inch barrels is what the 5.56 was designed for. they add a lot of life to that little round compared to 16inch.

[@gsxr1189]

Actually a 20" barrel makes less of a performance increase downrange to 556 than most any rifle caliber say compared to 6.5 Grendel, 6.8 SPC, 308, 224 Valkyrie, 6.5 Creedmoor,.....etc. The reason why is 556 is comparatively a very inefficient caliber with a low Ballistic Coefficient. Think of pouring water into a cup with holes in it and you can pour a bunch of water into that cup but with holes in it it is not efficient enough to maintain the water. Just like how you can throw a bunch of velocity at a low BC low efficiency 556 round and as it travels downrange the same thing happens it sheds that velocity quicker than other calibers. Also rounds loose velocity quicker at higher velocities meaning that a round will drop from 3000 FPS to 2500 FPS in less distance than it will from 2500 FPS to 2000 FPS. In fact if you compare a 20" barrel to a 16" in 556 at the muzzle the 20" will be on average 100 FPS faster with most loads however at 600 yards the 20" will only be 50 FPS faster than 16" and that's because of the reasons above. Therefore I don't see the point in chasing max velocity in 556 I'll just take the caliber for what it is a lightweight inexpensive low recoil caliber that's probably the best or one of the best choices for self and home defense and in that light I like 16" barrels over 20".

[@Doobie603]

The 20 inch is good for about 200fps more vs the 16 inch and like 400fps faster than a 10 inch. According to Paul Harrils numbers. Not a big change in accuracy though.

[@lcm7541]

*Screeches in 10.3*

[@gsxr1189]

@Frank The Tank Nope 556 is one of the lowest BC centerfire calibers. Out of popular calibers 556's BC only beats 5.45x39 & 7.62x39 otherwise outside of those and calibers designed for goofier hunting 556 is has the lowest BC of any centerfire caliber. 556 -- 77 gr TMK BC 0.420 6.5 Grendel 123gr SST BC 0.523 6mmARC 108gr ELD 0.536 6.5 Creedmoor 147gr ELD BC 0.697 308 185gr VLD Federal BC 0.552 224 Valkyrie 88gr ELD BC 0.545 6.8 SPC can be loaded with 140gr VLD's with a BC of 0.528 SSA ammo used to offer them as a factory load.

[@gsxr1189]

@@Doobie603 I wonder if that was just a fluke with everywhere else I've seen results from 16"-20" it's been closer to 100 FPS it makes me think that those results are unrepeatable. Here's a good test. rifleshooter.com/2015/12/223-remington-5-56mm-nato-barrel-length-and-velocity-26-inches-to-6-inches/

[@nutnfancy]

The only real, historically faithful A1 that's mass-market would be the Brownells A1, and that's about $1400. A pretty big price diff, but it if you're looking for a very close clone to the original patterns, it's a good option. For someone looking for an A1 style shooter that could even be used as the bones for a workin' AR, this one is quite attractive. I've gotten close to grabbing their A4 every so often, especially seeing the higher prices for Colt's. -Doodle

[@cawbo5397]

You can get a Brownells A1 for $900 when they go on sale. New price is 1200 max... Not sure where you're getting $1400 from www.brownells.com/firearms/rifles/semi-auto/brn-16a1-rifle-5-56mm-20in-black-prod113314.aspx

[@fullm3taljacket]

@@cawbo5397 That's what I did. That being said, I think this is a fair deal. They list the specs of the rifle so they aren't trying to hoodwink anyone.

[@FlyingNDriving]

You realize Windham has this MSRP at 1160 right and Brownells is at 1199... Not much of a reason unless you are finding deep discounts at the store

[@JimYeats]

Cawbo Because lately thats the price that has been listed on Brownells. I saw it myself about a week back. Also the link you added goes to a “blemished” version. The non-blem is $1299.

[@dtdt1100]

Love that government twang kacheoooo!

[@KaikanoSei]

My husband is drooling over that rifle he loves it. It looks like his old service rifle.

[@goatismyname]

Thank him for his service from us TNPrs.

[@baconx4]

A great father's day gift!!!

[@ramboxlegacy14]

Buy it for him

[@dstorm7752]

Same with me, Kimberly

[@unclejj13er75]

Let him....

[@whatsitmatter7046]

20" AR's are some of the best shooting rifles on earth. So pleasant and fun to blast with. Not to mention the velocity advantage. I bet most people in the hobby haven't tried one before.

[@jtaylorb88]

Truth there, I've been shooting my A2 20 Inch AR's the most lately.

[@georgewhitworth9742]

@East or West Which can only be attained using 20 inch barrels

[@StryderK]

I have an FN M16A4, great rifle. Just got a used Windham M16A1. Should be great but won’t shoot it much. To me, this is more of a historical piece. I got my Daniel Defense DDM4V9 and DD MK12 and the M16A4 to do the job and fire any 5.56.

[@devildog1989]

Dad served with an A1, I was issued an A2 in boot. Best I can tell, this has all the improvements actually necessary for the rifle while letting all you old war fighters get all the nostalgia that comes with the A1 upper.

[@cameronscott2713]

I personally like the aesthetic of a tri-prong but I understand why an A2 flash hider was used

[@totherepublic358]

@@cameronscott2713 unfortunately they used the a1 flash hider, not the the a2. I would prefer the a2 on this rifle since it is not a clone anyway. If they are going to put an a2 barrel on it I would much prefer the more functional a2 flash hider.

[@KirkFickert]

As southpaw I'm interested in this. I like the sights of an A1 better than A2, but the lack of a brass deflector is...well a bit annoying when I shoot SP1's, etc.. Part of me would like to just spend the money and get the Colt Retro, but once again run into brass to the face problem. This seems to be a bit more practical.

[@cs-rj8ru]

@focke wulf The thing about Irons is that you can see everything in front of you with both eyes open. Optics are great 200yds plus....

[@Mrgunsngear]

Thanks for the review

[@chrisnorris173]

I don't have an A1 version, but I do have a windam AR. I love it! Iove the history of the company and customer service is excellent!

[@erichpratt2711]

Not going to lie, my first AR was bought because I wanted the gun I used in Counter Strike Source. 😅

[@duster0066]

No shame in the truth. My first bought rifle was/is a Win mod 94 because of "The Rifleman." He wasn't whipping a 94 but I couldn't tell the difference. Got me another one that is 121 years old.

[@jeanvaljean341]

@@duster0066 I watched "Once upon a Time in Hollywood" the other night. Leo D kept reminding me of Chuck Conners lol

[@300whiteout9]

Sks pubg

[@radradR0bot]

It's Windham Weaponry

[@conroypaw]

Yep. These folks used to be Bushmaster, before the company was bought by Ceberus Capital-Freedom Group-Remington Outdoor-Whatever.

[@springof-wf8vy]

You got that right I own two Windham weaponry rifles one in 7.62x51 NATO and one in 5.56 NATO they're both Damn good rifles 👍👍👍👍👍

[@resolute123]

Yup. Nuff said.

[@beeleo]

"It's Windham Weaponry." Wow, how did you figure THAT out???

[@radradR0bot]

@@beeleo because that's the name of the company. Not Windham Armory like he kept saying

[@hobbyoftheday4017]

I have a 20 inch a2 from winndam armory and love it, it's been very accurate and 100 percent reliable and I run and gun my ARs in the woods and mud like a true larper should

[@erichirst2766]

Thank you so much for being honest in your reviews, no BS. Found that a lot of your videos have helped me with purchases. Keep up the good work. I love Windham Weaponry rifles, had one and regretted selling it.

[@yankee1985524]

Damn it this is making me want another 20" AR

[@ZASurvivalist]

Nutn.. rants and feature length videos are always welcome. I listen to these while I work, THEN I come back to watch the content when I get home. Thats two full views, every time. Always enjoy your vids.

[@ronaldhelman3783]

I think it captures the "spirit" of the original, and it's a damn good Rilfe! I would love to own one. 🇺🇸💪

[@thedeathwobblechannel6539]

20 in gives you that bit of longer range the 16 can't. In open country the 20 is no hindrance either.

[@JR15A2]

Great review. I love the retro A1, A2 and A4 rifles! For anyone else who does, the Geissele rifle length Super 42 braided wire buffer spring is a great upgrade. Gets rid of the twang and even smooths out the already heavenly feel of the 20" rifles a little bit more. They're only like $20 as well, so not too hard on the old wallet either.

[@tufelhunden5795]

Thanks for the idea!! I may grab one for my A2 clone.

[@nicholasjacobellis958]

Very well said as usual. Learning to shoot with irons is the way to go. I learned on a GI issue M1 Carbine, a Ruger Mini 14, a Colt CAR15 and an M16. Becoming proficient with iron sights should be part of your marksmanship training program so you can still engage targets if your red dot or magnified optic goes down or becomes damaged.

[@brinsonharris9816]

Looks like an A1 & A2 loved each other very much, and…great combo of features. Tear drop FA, A2 case deflector, stock and barrel, and the cool triangle handguards. Probably will be a great seller.

[@midwestmotorman8547]

When Brownells had their new grand opening a while ago, they had a whole pile of used police trade-ins of Armalite A1 and A2 rifles with a $550 price tag... that was a steal of a deal.

[@Danceswithempties]

A1 with A2 upgrades where it needs it is an excellent idea. K.I.S.S. in the AR platform is much needed today & agree for 1st time shooters it is a great option. Fixed carry handle & iron sights equals dead nuts reliability.

[@jamesu223]

I couldn't agree more , the perks of both a1 and a2 combined are bad ass . That a1 battle sight is amazing compared to a2 for me . I'm gonna get this rifle for sure . I went with a4 instead this time around instead but I'm not leaving this awesome retro behind.

[@rattelv426]

exactly, it reminds me of a retro-modded car, taking a brand new 1960s muscle car body and giving it modern brand new running gear. Keep the look but also give it modern improvements.

[@MrBackspace4848]

As time passes, Old becomes new.

[@takingbacktoxic7898]

For some reason I am thinking about what Han Solo said about the Millenium Falcon when Luke called it a piece of junk. "She's got it where it counts."

[@jeffstone7912]

Looks like the M-16 A2 I carried in Dessert Storm Except for the handguard and rear site. Sweet! Everything you need and nothing you don’t.

[@2fathomsdeeper]

Yup! Looks like a A2 stock and upper on the A1. Had built Frankenstein A1's during GW I due to A1 parts going obsolete. Still a great rifle. Rather have a full rifle than the Mforgeries. Even the report of a rifle is more powerful than a carbine.

[@tardwrangler]

Sweet indeed, mmm dessert

[@wesleypipelayer7627]

Called it a “Whindam Armory” so many times, I actually started to wonder if that was the actual name.

[@albertoaquino3609]

I was in the U.S.M.C. from 1978 to 1982 and I don't care if it's not exact, if I had the money I'd buy it. The M16A1 was my first rifle ever, and I loved it. If I can get something close to it cool.

[@dave-0295]

My department (I’m an LEO) issued surplus A1s as patrol rifles. I loved mine! It was very accurate, reliable, and the recoil was light. I miss that rifle and have wanted one ever since.

[@brucepaulson6279]

Love my Windham's, and this on looks like the one I carried in the service, minus the forward assist. Good job Windham.

[@snoskitv1970]

I've been wanting this video for a long time, thanks Nutn! You the man =) Recently realized I've been watching your stuff for nearly 10 years, I think its time I pitch in on patreon! Can't believe you're still chugging the project along. To so many of us you're a voice of reason and an invaluable resource for helping prep our systems. You've helped so many of us create systems that work for our needs and we can't thank you enough. I know for me at least. Hope to catch ya sometime for a gearcheck. ps: we need more megaphone 📣 cracks me up every time. pss: was JUST talking to my buddy today about how critical it is to learn and be proficient with irons. Seems like most dudes have lost focus of what matters most with making sure their Gucci rifle is impressing the tacticool crowd. - Josh

[@modelcitizen63]

I was issued a Colt m-16a1 in 1981 when I enlisted in the Marines up until we were issued the a2. With this, this rifle looks close enough for me to buy.

[@wsieber89]

I bought one of these from Atlantic firearms just before they sold out. It's been nothing but reliable, accurate, and just a joy. Sure it's not an exact replica but the thing preforms well. That's all that matters.

[@mrgauges9065]

I’d be way more into this than a 1969 muscle car with a modern crate motor, kind of the same idea

[@GeorgiaBoy1961]

@ wsieber89: Windham Weaponry are a great company making great products. They've been a well-kept secret in the FA community for a long time now, but word is starting to get around. Their products rock.

[@wsieber89]

@@GeorgiaBoy1961 no joke, a friend of mine has 2 Windham Ar15s for a few years now. I was impressed with their performance as well as the price. It certainly helped me along in my decision to buy one from Windham.

[@KirkFickert]

@@GeorgiaBoy1961 They are the old Bushmaster...

[@GeorgiaBoy1961]

@@KirkFickert - Yep, that they are...

[@andydepaolo5601]

love the honesty! I'm a retired guy myself and could appreciate an honest opinion. Oh bye way! Spot on with the Windham A1. Thanks again..

[@shorttv1214]

Congratulations you have been selected among my few shortlisted giveaway🎁 winners message the above to claim your prize🎈

[@johnhudak3829]

“Learn how to shoot irons...”. THIS!! Optics are cool, but they can fail. Iron sights are always there. Great channel. Gonna subscribe.

[@patrickmessinger9476]

I served with an A1 and if there was a time machine this would be so close to the issued ones many in the field may not even notice. Great vid thanks.

[@edwardsdeacon]

This is absolutely a good rifle and it will serve whomever owns it very well for years. Well done Windham Weaponry 👍🏽

[@jeremywatson9129]

Well it seems to do AR things, which is what I look for in my AR's.

[@hopethishelps91]

Here in NY I ran into a young man with one. (Mag was pinned). We talked about the classic look. Everyone at the range thought it was cool

[@shadowfoxcorp]

That sucks about the pinning but, it's awesome you guys could get one.

[@hopethishelps91]

@@shadowfoxcorp you can either pin the mag or have featureless. It sucks badly but atleast we can still get them

[@theghostofpatrickhenry4516]

@@hopethishelps91 modifications can still be made in the right circumstances. Looks like a fun rifle.

[@joedixon5513]

I used two M-16 variant's when I was on active duty. The M-16A1 and M-16A2. I hadn't any trouble from either one. I was an 0311 in the USMC.

[@shorttv1214]

Congratulations👏 you have been selected among my few shortlisted giveaway winners message the above to claim your prize.

[@GodOfWar221]

If I could afford it at the moment, I would totally buy this A1 replica. Mostly for the second kind of cool. Personally, I love the look of that rifle..the handguard, the forward assist. That's the type of rifle, that you bring out at the range...and you turn a few heads. Sure, it's got modern components in it...but I think Windham's did a pretty good job with this rifle. Can't wait to see more from them.

[@bobyluppo]

Been watching his channel for years years!!!!! Thank you for posting your videos. Extremely helpful!

[@shorttv1214]

Congratulations you have been selected among my few shortlisted giveaway🎁 winners message the above to claim your prize🎈

[@cjr4286]

I'm glad I built a Brownells A1 when I did because it's all so darned expensive now! I also have a free floated, scoped upper that I can use on the A1 lower to modernize the design. Sweet deal!

[@sgtcote1]

WINDHAM GS here and your theory is for the most part correct. We call it the Modern rendition of the A1. And It's extremely popular with our shooters and it's sticking.

[@shorttv1214]

Congratulations you have been selected among my few shortlisted giveaway🎁 winners message the above to claim your prize.

[@bigdikannonannon152]

It appears to have a 3\4" thick A2 barrel, a Canadian C7 upper receiver with an shell deflector and a A2 butt stock

[@MaximusOverhead]

If you put the Canadian army green A2 furniture I'd be a c7 through and through !

[@echodelta2172]

It does, I would probably buy one if it wasn't for the fat barrel (already have an a2 and a4). Passing this off as an A1 clone is pretty sad considering there are more legitimate ones on the market. I don't understand why WW didn't just throw a pencil barrel in there.

[@echodelta2172]

@@MaximusOverhead this is true!

[@NovaScotiaNewfie]

@@MaximusOverhead the first C7's with the carry handle were black. The A1 had the flat top rail for the C79 Elcan site. Then the A2 came out with collapsible butt stock, green hand guards and pistol grip and rails on the front site post and a foldable front grip.

[@johnsimms818]

I have owned this rifle for several years now and cannot be more delighted with the performance of the windham 20 " government model .the difference between mine and the one tested is the forgrip.i recently showed this to marine vietnam vet from 1968 and his two comment were the forgrip and that is was only semi auto ,we reminisced for while told few stories and wept a little .

[@mattmorrison9379]

Ya know, if there was more people like Nutn I believe the world would be a better place.

[@TacticalDoodle]

yeah but our toilets would clog more.

[@mattmorrison9379]

@@TacticalDoodle a small price to pay lol. Your a lucky young man TD atleast from a outside perspective :) . Seems to be a cool guy.

[@treeman-7069]

You are more than right about the young population liking this rifle from video games. I myself am 22 and I'm building an A1 because of the video games I played.

[@ckim6400]

If it looks good and shoots good I'm happy! I like 20" carry handle AR-15's!

[@ducktapepilot]

Just noticed the Remington Speedmaster on the wall. Love that rifle. My dad had one and whenever I see one, it makes me think of hundreds of squirrel hunting trips we spent together.

[@mp15a]

First Thing I Noticed ducktapepilot! Had One As A Kid. Shot Thousands and Thousands Of Rounds Through it.

[@ducktapepilot]

@@mp15a They are great rifles!

[@MrJherime]

That is a rifleman's weapon right there. I'd love to slap some steel with that at 300-600 yards rocking irons. The weight is good, my 6920 is 6.95 pounds with 14.5 in barrel, another .55 pounds for 20 inch is good weight.

[@kennethrimmer1883]

My main AR I rock out is a old A2 20 inch. I call it a “modern retro” bc it duracoated with magpul furniture. I get some funny looks at it but that rifle can just SHOOT very well.

[@BB-gr9hq]

Most negative product comments are made by people who have never "made" a product.

[@richardsveum8452]

or used one for anything other than punching paper. The A1 is a great lightweight KISS rifle.

[@gsxr1189]

Actually I think that the majority of negative comments are made those that own neither product.

[@Unknwn_Senpai]

Ahhh, the AR guys complaining about it not being “period accurate” the same group (if we’re talking die hard ar guys) that complain about the lack of “modernity” on AK pattern rifles. This thing is SLICK! I really want one!

[@chriskelly509]

As long as it runs. I've seen $1600 pistols out of the box have issues...

[@risky7165]

*Kimber has entered the chat*

[@MrBowles760]

Yup, must have been a Kimber

[@ike_of_the_greil_mercenari465]

I just picked up the Windham Weaponry "20" Gov't. Rifle" and I love it. I've put 75 rounds through it and I love it. I purchased the rifle after watching your review.

[@inertiallychallenged]

This gun is kinda like a classic car I have...79 Trans Am. Looks stock on the outside but modified engine etc. In the car world they call it a "resto mod".

[@850spirates3]

This exactly ☝️. I’m not a purist I don’t need every little thing to be period correct. I just like the looks not to mention the price difference. And the 1/7 twist barrel does it for me.

[@eddiet204]

I was one of the last Marines to carry the A1. My reserve unit still had these. Loved the full auto v burst.

[@professerjeeves]

There is a simple solution just call them a retro AR 15, dont specify A2, A1...

[@yurizabrooks3631]

The A2 was the best 👍👍

[@lutherpayne9957]

@@yurizabrooks3631 the A2 was 3 shot burst...A1 was Rock and Roll.....Give me some of that old rock and roll any day....lol My opinion of course.

[@supersexyfatguy]

@@yurizabrooks3631 A2 was too heavy, it's an excellent target rifle, but strayed too far from the original intent of the M16.

[@bowlofrice8]

@@yurizabrooks3631 a2 with a1 stock and grip is choice

[@AixSponsaOutdoors]

@@supersexyfatguy less than 8.5 lbs loaded? Thats too heavy for you? Please help me understand

[@KRN762]

Built my "A1" using an NDS upper and lower with a Brownells A1 1/7 barrel. All modern components, except for the funiture (which are vintage OEM). Sweet shooter indeed.

[@ericpewpew_rn5294]

Looks like a solid gun for the price and reliability; retro is cool now

[@revfaulkner]

Great Video and I concur sir. Appreciate your honest reviews from your hands on experience with the firearm.

[@bradcarpenter1881]

We LOOOVE your rants, just do it!

[@michaelhodges8312]

I have their A4 Government. Mine is actually a Windham Bushmaster receiver that was re-barreled by Windham Weaponry with a 20” govt. barrel. Love it! I think I will get this one as well! Thanks for the video Nutn!

[@shorttv1214]

Congratulations you have been selected among my few shortlisted giveaway🎁 winners message the above to claim your prize🎈

[@Blight_Knight]

Love the retro M16 style builds 😍 I wil either put one of these together or a Colt Commando style one day.

[@salviloc21]

I’m building one and I’m trying to get as close as I can to the real but let me tell you guys it is expensive and time consuming but I know it would be worth it. One of the most beautiful and iconic rifles ever made. Thank you for the video great review.

[@shorttv1214]

Congratulations you have been selected among my few shortlisted giveaway🎁 winners message the above to claim your prize.

[@Marcus_972]

I’ll admit when I first saw the retro AR thing I yawned but the more I see the more I think it would be a cool sidekick to my old school AKMs. Now I’ll just need an old GI 1911 to go with my MAK.

[@almostontimehero5415]

Brownells Retro. AKM in wood furniture. Tisas 1911a1. Go my brother and larp to the extreme.

[@TacticalDoodle]

Don't worry, I hear from guys waiting that the CMP is going to accept apps.....maybe next year. Huzzah! $1100 or whatever for a stock GI Pistol. I want one, but that's a hard price to swallow not knowing whatcha gon' get. I know a few dudes who jumped into shooting sports in the MW2 era, all they've known as a Gov AR is an A4 with the RAS M5 rail, and that fat bastard is like, 9 something pounds.

[@henrylang6929]

Love my Windham AR-15 A1 Government. Awesome look and feel. Really appreciate the storage compartment in the A2 style rear. The A1 handguard is comfortable in the hand. I think modern looking ARs went a little overboard with the attachment rails. Can still add rails to this if you want and just have exactly what you need.

[@nutnfancy]

Yeah, as a functional addition I really like it. If something happened and I needed night capability, having a rail in the parts bin could be handy and voilá, you got yourself another setup! -Doodle

[@nopeheckno7216]

Your boy carrying that rifle by the carrying handle makes my old nco eyes twitch...

[@NCrdwlf]

I felt like I was being trolled ..lol

[@TheTyrial86]

What's the point of a carry handle of you don't use it?

[@TheDraco877]

@@TheTyrial86 too many stuck up OCD bsing NCOs who think got to do it their way. As a former senior specialist keep the dust cover closed and pointed in a safe direction and I am happy. Many of those NCOs need their dicks slapped in the dirt.

[@TheTyrial86]

@@TheDraco877 I to like to carry around a tactical purse.

[@Spike-13]

@@TheTyrial86 it wasn't designed as a carry handle actually. On the old AR 10 it was to protect the charging handle on the top of the receiver.

[@vikingsoftpaw]

Windham is the old Bushmaster crew. They build a good product.

[@paulkindler8430]

Love it! I don't care much for the modern AR's they're good, but they just don't have the appeal like a classic .

[@shorttv1214]

Congratulations👏 you have been selected among my few shortlisted giveaway winners message the above to claim your prize.

[@Front-Toward-Enemy]

Most people who are looking into buying a retro ar-15 aren’t buying it for shtf type stuff. Most people looking into retro rifles are either old Veterans or collectors with an interest in history. For that, people would be happier with buying a more faithful replica. For the price, id just get a Brownells. Which is what I did. I Paid $960 for the brn-16a1 about 10 months ago. When it was on sale.

[@ClovisChitwood]

that's about what I spent assembling an A1 clone from a parts kit and with the 1/7 twist it is likely a more versatile rifle, that being said I love my parts kit A1 clone

[@billbee235]

I recently just built a custom M16A4 variant rifle and it's freaking sweet. Retro guns are definitely making a comeback.

[@shorttv1214]

Congratulations you have been selected among my few shortlisted giveaway🎁 winners message the above to claim your prize.

[@brandoncain6784]

Rant on brother!

[@gragrn]

I'd buy one in a heartbeat, except I live in Australia. I fired the M16A1 in the army 40 years ago and loved it!

[@madman-fr3rx]

We need ppl like you SCREAMING on every video you see about what happened there so HOPEFULLY it doesnt happen here

[@josephwhiskeybeale]

Every time I’m ready to buy one of these they sell out.

[@bobbyc2768]

You can always add an a1 stock to this. As I added an a1 stock to my a3 build because that little bit shorter stock is actually a lot nicer for standing up shooting, and an a1 barrel does balance a little nicer than an a2 profile or HBAR (which a lot of a2 and a3/a4 rifles come with)

[@springof-wf8vy]

That rifle looks bad ass . I will get me one as soon as I can . 😁

[@ecoyt1]

I like!!! It looks like the M-16 I learned to shoot in JROTC at Ft Rucker, AL back in 88’. I already have a Windham SRC. I may have to pick this one up!!

[@elifoust7664]

Ft.Rucker, Al.MP CORP.141ST MP.1975-76

[@ecoyt1]

Eli Foust I probably saw you at some point. I remember seeing several MPs.

[@elifoust7664]

@@ecoyt1 75-76⬆️

[@bidenhasdementia8657]

I'm gonna watch every minute of this vid!!!!

[@1911blacksteel]

I got mine and love love my Retro M16A1/ AR 15! Dream come true and tac driver

[@GALEB-f9o]

Well i got my Colt M16A1 AR15 semi and full Auto 😎😁

[@boyhowdy5893]

I had a Colt A1 that I bought in the early 80's, then I sold it in 2005 and I'm sorry I did!

[@salviloc21]

Sad story 😢 bro . You didn’t know what u had .

[@jarrettmetz6019]

I have a windham AR-15. Love it has never failed me thousands of rounds through it. It’s my favorite AR iv ever owned

[@MightyMaynes]

Loved this review, I was really sad when I went to Gunnies and they didn’t have it. I’ll keep hunting though cuz I REALLY want one.

[@iwillnotcomply007]

Brownells A1 is around 900 to 1,000 on sale, closer to 1,200 when not on sale. One can build an A1 clone with Brownells parts a little cheaper, especially if you don't care about the A1 lower and want an A1 inspired build. If you use a lower from Aero or Anderson and you don't care about sourcing some of the pricier components like the repro A1 port door and tear drop forward assist. What makes the A1 fun for me is the light weight and long sight radius and easy to use sights. It's definitely a good time at the range.

[@richardsveum8452]

Looks like my next rifle, I loved the A1 but at 6'6" the stock was always way too short.

[@warped8425]

I am 6'7". My old SP-1 with the same stock works great for me. Shoot jackrabbits for days with it.

[@avionics21]

So, they basically made a Diemaco/Colt Canada C7 with A1 handguards. That's exactly what it is.

[@stevenforbes6939]

My wife says candy Lucky Strikes (remember those?) :-)

[@Mobius762x51]

@Nutnfancy the upper is a Canadian C7(Canadian M16 variant) style. The M16A1 only had a forward assist and no brass deflector. Personally I love the C7 look for a carry handle AR. Love the review by the way!

[@pricklydingus8604]

"It's all wrong everything about this fake A1 is wrong!" *Colt makes a replica of the M16A1 for $2500 MSRP* "That's too expensive!" Can't win I tell ya.

[@Falconguygaming]

brownells

[@fullm3taljacket]

@@Falconguygaming Also, Colt's is not correct, or even that high of quality...all you are paying for is the pony.

[@boogerdog5247]

I have two sets of furniture, vintage, the real deal stuff, stock with armory spray painted stock, in need of pencil bbl., lol, but it'll happen one day. I know where to find the uni-body upper receiver. The Franken Bin likely has any internals needed for completion. Love the Mattel look.

[@TwoTracksOutdoors]

Your reference to POU is spot on, Nutnfancy. In my case, as a young Vietnam infantry soldier in 1966, I was issued a brand spankin new M-16 upon my in country arrival, with NO prior training on this weapon. After having trained on an M-14 in both basic and AIT training, I was pleasantly surprised to see how light the rifle was and initially thought I was Billy Bad Ass with this in hand. That is, until actually using one during inclement weather and battle conditions. Mine, along with many others, starting having problems, specifically fail to eject problems, especially when fired on full auto. Extra attention to cleaning failed to rectify this ongoing problem. Ordinance replaced the extractor a couple of times, something that didn't really help this phenomenon either. So, when I rotated, I was so happy to get rid of my M-16 and for more than forty years thereafter, I never understood all the AR hype and refused to even consider the platform in civilian life, mostly referring to them as AR jammomatics. In 2013, with a vast shortage of available black rifles and fearing that a total ban on the AR platform was imminent, I went against my long standing convictions about its personal unreliability and purchased my first AR, a S&W M&P Magpul FDE edition, on sale at that time for a very reasonable $699.00. Fortunately, modern AR versions are much more reliable than my Vietnam era M-16 and, ultimately, did not get banned, so I added a few more to my collection, even building one from scratch with various kits and accessories. I wish Windham Weaponry success with this A1 offering but, in my case, I don't like the retro look, as it reminds me too much of my 1966 M-16 jammomatic. Just a former soldier's perspective, memories of which are now mellowed by over fifty years of trying to forget just how undependable these early version rifles were.

[@Bald_Head89]

The cigarettes better be included!🤣

[@xenonram]

Of course. You gotta burn a heater while shooting it. That's mandatory.

[@pleitrap7073]

If you ever fought with an XM16E1 you hated the unreliability. You watched your brothers being killed either because there was only one cleaning rod per man or the cleaning rod was stuck in the barrel while another brother died. When making those straight up, or down, Central Highland humps and slides with 60+ pounds and no rucksack frame, you appreciated the 6 7/8 pound weight, the accuracy, and the low recoil. In actuality the problem was the military ball powder ammo, not the weapon. Eugene Stoner RIP.

[@dancarlson4779]

AK Community: “We want good quality parts so our guns don’t explode and kill us!” AR Community: *sips bud-lite from a rocks glass* “We want our screws to be period correct and a proper flashhider. Also it’s too pricey for our white gloved, perfectly moisturized hands.” 😝😂

[@winstonsmiths2449]

1:9 maximum twist rate! I put one together but the barrel is a 1:7. I wish I had ordered the 1:9 twist. Shoots smooooooth! Recoil will put a smile on your face. I also did not buy the carrying handle and I did put a scope on it. It is still very fun to shoot. I did order a crappy (non-polished) trigger group from PSA. I used a new Arkansas stone to polish the pertinent trigger surfaces and it turned out to be a fantastic trigger job. I am a stock guy for the most part.

[@shorttv1214]

Congratulations you have been selected among my few shortlisted giveaway🎁 winners message the above to claim your prize.

[@johnp5139]

When you led off with intro to a rant, I thought you were going to delve into the Defund Police madness

[@gatorintheyard]

I am on the waiting list for one. Thanks for the review. (and the rant)

[@jarmystrong]

Rant rant rant. Also I want one. Love the classic look without anything tacticool.

[@hopethishelps91]

I hate how every gun has to be "tacti cool" sometimes a gun is fine the way it is

[@VictoryOrValhalla14]

F R eh trust me fellas what we have now is way better then the A1. I went from the A1,A2 to the M4 and I’ll tell you the M4 is better in every way but buy whatever you can afford and what makes you happy.

[@michaelblacktree]

My A2 style AR-15 has a Windham Weaponry upper assembly. So far, it's been flawless with a steady diet of Federal XM193. PS - That nostalgia thing you talked about is exactly why I have an A2 style AR-15. I carried the M16A2 in the Army. I wasn't a huge fan of the M16 when I was in the military. But after returning to civilian life, the nostalgia bug bit me.

[@dshteynvil]

You're dealing with a small minority of retro rifle cloners that want everything period correct. I personally think it just needs to look the part. Who needs a 1:12 twist pencil barrel these days anyways?

[@KirkFickert]

I'd prefer a 1/8 twist pencil barrel if you're going to modernize it.

[@ViktoriousDead]

Kirk Fickert why? What grain weight are you shooting on average?

[@KirkFickert]

@@ViktoriousDead 75gr BTHP.

[@ViktoriousDead]

Kirk Fickert 1/9 stabilizes that fine. Most people aren’t shooting crazy high grain 5.56. 1/9 does great with the standard mid 50 grain weights.

[@thomassymonds6308]

Yas for another GRV! Love the 20" ar's. Classic, functional, low recoil.

[@cragbot1]

I hope you review the WWSD rifle when it comes out. Looks like it will be a very high quality lightweight ar

[@ddaverr]

If you want to support a Satanist, the WWSD rifle is for you!

[@BV-fr8bf]

@@ddaverr HOLY COW! I just checked and confirmed. I heard Karl's voice at the Satanist KZbin channel presentation..... I DID NOT KNOW! THANK YOU! Did not see the second video (Hail Satan) as it was 'pay for view' but they mentioned Karl Kasarda was on InRange TV....... Some lines are not to be crossed......

[@DeportableDeplorable]

@@BV-fr8bf I mean how much does it even really matter that he's a satanist? The overwhelming majority of Satanists don't even believe in Satan.

[@JimYeats]

Dave R Hell yeah we do! Karl is a strange and weird dude, and he makes good gun content. The Satanic Temple thing is basically a group that makes fun of other religions and is completely and purposefully over the top as a way to trigger people like yourself.

[@BV-fr8bf]

@@DeportableDeplorable And you have talked to Karl to confirm where he stands exactly?

[@cw7legionofpewrights596]

I’m still gonna get a AR15 A1 or build a A2, just a different era from now days and one of my grandpas was one of the first navy seals and he didn’t like the original M16s but now days he likes them they’ve came a long way.

[@shorttv1214]

Congratulations you have been selected among my few shortlisted giveaway🎁 winners message the above to claim your prize.