Installation of Lexan Windows using single part window gasket. Window is being installed on a 11ga sheet metal door located on a medium-voltage metal-enclosed capacitor bank manufactured by NEPSI (Northeast Power Systems, Inc.).
Пікірлер: 30
@hakeemkhaderali1158 Жыл бұрын
Very informative and useful video. Thanks for sharing.
@davebrittain92164 жыл бұрын
There is a better way to do this! First of all use lube for installing tires instead of the messy WD 40 that will not be good for the rubber and will seem to never go away. It is similar to soapy water. They sell it by the jug with an applicator. Secondly there are tools specifically for this. The awl is a problem waiting to happen with scratching the surface and possible injury. They make a hard plastic rubber installing tool as well as a locking tool specifically for doing this. Doing it with my suggestions would make it faster, easier and safer.
@jmaccobo13 жыл бұрын
Great how-to video, I have two of these windows on my garage door and the gasket material has degraded . I ordered the gasket and will be installing soon.
@9Dark-Warrior67 жыл бұрын
very informative, thank you
@jaytonz19 жыл бұрын
I have a metal garage door that requires this type of gasket for the windows. Where can I find that gasket? thanks.
@jasoneverett86809 жыл бұрын
Where can i find the seal and window at
@marquiswhitsette35558 жыл бұрын
Yup, looking for the gasket as well.
@shanekang11362 жыл бұрын
Hi Thank you for your video. I have question , Do I need to put any special seal for hole before put glass. Because if it has rain , I think it might leaking from a little gab . Thanks
@PrabuKhayanganJawawi4 жыл бұрын
How to remove of windows, if the rabber already broken?!
@mikeyboy68952 жыл бұрын
well mate actually wd 40 is great for rubber as its a synthetic lubricant works well and any glass cleaner will remove it secondly just use a piece of 3mm diameter string in the grove and pull it in i have done many windscreens this way easy
@Franaflyby8 жыл бұрын
so I'm a single mom.. I don't know how to do this can you maybe tell me where I can go to get this done? what kind of business to look for. I'm in utah
@jaytodd58093 жыл бұрын
So ..it has it's own locking strip molded in?
@eboniethomas16554 жыл бұрын
hey did you by any chance use a feathering tool?
@Nepsi8 жыл бұрын
Austin hardware or industrial hardware - look for them online
@mahadevakumar21045 жыл бұрын
What is the name of tool you used
@fantumandal61982 жыл бұрын
Nice
@Michael-ol9ohАй бұрын
Do you make cove window
@smid25504 ай бұрын
You need to be using tire mounting lubricant or just real soapy water. WD-40 is oily and hard to get completely off -
@ezkabob65287 ай бұрын
Too bad I can not put 5 million likes to this video.
@Cowponydesign15 жыл бұрын
too much background noise, can’t hear everything u said, especially at beginning
@kiwiwifi2 жыл бұрын
1. Squeeze the gasket 2. Thin side on the aperture
@melodysring7 жыл бұрын
seal the center
@montebarnes44985 жыл бұрын
Most of us have wd 40 but not inox.
@markdunbar82194 жыл бұрын
Wd40 is not good for rubber or plastics 😳
@superchargedVR16 жыл бұрын
WD 40 is mineral based - that's not gonna help these materials in the long run.. Inox would have been a much better choice here (Lanolin based) and would have done the same job if not better.
@smid25504 ай бұрын
I would've used tire mounting lube, or real soapy water -