[36] Fitting a Cat Flap in a uPVC Door

Disclaimer:
Under no circumstances will Paddy’s DIY be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Paddy’s DIY or a third party.
In no event shall Paddy’s DIY be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Paddy’s DIY, it cannot guarantee against improper use or unauthorized modifications of this information.
Paddy’s DIY assumes no liability for any property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Paddy’s DIY recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Paddy’s DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Paddy’s DIY.
Hello KZbin friends, and welcome to another wonderful video from Paddy's DIY
In this video I'm going to be fitting a cat flap into a uPVC door for one of my customers. I will be removing the existing double glazed unit and fitting a flat PVC panel into the door. I will be cutting a hole in the PVC panel to suit the cat flap. This particular cat flap is a microchip cat flap. It will be programmed to the microchip in the cat. When the cat comes near the cat flap, it will detect and read the microchip and unlock the cat flap. Allowing the cat to go in and out. It will be locked to any other cat that tries to enter.
I have fitted a lot of different cat / dog flaps down through the years. In wooden doors, PVC panels and double glazed windows / doors.
I always get the customer to supply me with the cat / dog flap. As there are different sized ones to suit different sized breeds. Also there are several locking choices. Microchip locking, magnetic locking or manual locking.
Please like and subscribe. Post a comment and please consider buying me a cup of coffee or a beer by donating with the "Thanks" button :) Thank you!

[@PaddysDiy]

Hey lovely people! Why not buy me a cup of coffee or a beer to say thanks. Click on the THANKS button above 👍☕🍺

[@sputnikwar]

Thanks for the video, Paddy.

[@connordean4896]

Brilliant informative video!

[@PaddysDiy]

Glad it helped 👍

[@doubleimage]

Thank you,great video.

[@PaddysDiy]

Glad it helped 👍

[@user-gh14qytfu8]

Really helpful thanks

[@jmadawg]

Very tidy install

[@PaddysDiy]

Cheers 👍

[@moniquesalafia150]

Fabulous video how do I get hold of you to fit mine please xxxx

[@paulaypuntoo]

I’m changing my cat flap to a microchip one and the existing screw holes don’t match with the new one! Which drill bit did you use? And how could I cover the existing holes to ensure I don’t go through them as I’ll be drilling quite close? Thank you!!

[@PaddysDiy]

It's just a regular multipurpose drill bit. Will the old holes be visible when the new cat flap is fitted?

[@itssofactso5437]

Looks like you've put it on the wrong way mate.. the screws should have been put on the inside

[@PaddysDiy]

I agree with you. They should have the screws on the inside, but that's the way the instructions say it goes. Also the 4 way lock is on the inside, and that is always on the inside

[@jamescoleman-nx1mf]

Nice job Paddy, how long did the job take all in, approximately?

[@PaddysDiy]

An hour or so

[@ericoflynn8734]

Hi Paddy, nice Vid....where did you buy the panel? I'm finding it difficult to source it as a private DIY person

[@PaddysDiy]

Any local window company should be able to supply you with one. There are some online shops that sell them also, although it depends on what part of the world you're in

[@sepez]

Looks like you fit it backwards. Either that or its an odd design

[@PaddysDiy]

That's the way it's designed

[@mcfcmanc]

Yep just fitted one of these and it sticks out at the front as designed

[@johnrustage]

Hello... where is the best place to order the replacement PVC in Ireland (meath if possible)

[@PaddysDiy]

Any local upvc window fitter should be able to order you in a panel. Or windoorhc.ie/tongue-groove-white-half-panel/

[@davinamcnutt]

Paddy where r u based? Could you do a job in Buncrana, Co. Donegal???

[@PaddysDiy]

I'm the other end of the country I'm afraid

[@kay7216]

Hi I've made a contribution which I pray please God will encourage each viewer to do the same . Best wishes with your ongoing philanthropy endeavours no one should be with the basics in life. Please keep up the good work ❤

[@ameliaord867]

Hi

[@bloggs692413]

cracking

[@Emilia-kb5ls]

P r o m o S M 😝