How To Tint - Honda Civic Hatchback Rear Glass

[@jesiemanalo6878]

yeah best tutorial..all was detailed from taking off all the screws and how to put those screws back on..big salute to this guy

[@11superstar1997]

This is the best tutorial I've ever come across on ALL OF KZbin!! Subscribed 👍👍👍👍

[@WindowTintWarriors]

Thank you!!!

[@jesiemanalo6878]

this guy is amazing...I have exactly the same car and if I'm close to your shop I would definitely trust you because of how you did it.seems like it was so easy for you no hustle..touch of professional that's what they said right Jimmy?haha...what a steady hand amazing

[@bryancardenas777]

We at the Honda dealership just have a separate back glass to shrink film on. Much easier and you get no fingers that pop up at all on the installation phase 👌 comes out perfect every time

[@hamchillyvlog6034]

It worth to have one?

[@bryancardenas777]

Ham Anuphap yes it is if you are getting a lot of civic hatchbacks to tint or type r it basically pays for itself and no worries of taking things apart or breaking anything if not careful.

[@rebelthepit]

Yep, cost about $60-$80 for an aftermarket rear hatch glass from a automobile glass shop.

[@JBIRD575]

@@rebelthepit I heard the curves are different though do you think it's true that aftermarket is different from Factory?

[@jamieg.3829]

Thank you, just did my first hatchback yesterday and this video definitely helped because there was no way for me to shrink the back glass. Thank you.

[@christianmichael8381]

Damn man, you really are a tint warrior! 💥 This is pure skill 💥

[@sharons9367]

Thanks for sharing the process ! What a pain in the a ! By the time it takes to pull it apart I would have tinted a whole car , if I decide to tint a civic they will pay 💰

[@ducebigalow8834]

Is that rear panel with trunk release and emblem just installed with clips or is the screws that also hold it in place? Looks like in video it's just on by clips.

[@TheFilmTrainer]

Thank you for this. Helped me a lot tomorrow

[@swampzilla590]

Your videos are so helpful dude

[@WindowTintWarriors]

Glad you like them!

[@n4rek840]

Great work , i like the way to tint cars

[@cybernan33]

eres una gran motivacion para los que como yo estamos aprendiendo solos, ya que es muy dificil aunque parezca facil tintar ventanas

[@Toyota529]

I have use tru-cut program through suntek my plotter machine now Which plotter software do you use for your plotter machine? Thanks

[@JBIRD575]

Good video....yellow turbos worked great...ordering huck towels soon !!$$$

[@johnr1191]

Appreciate you brother, enjoy the holiday weekend.

[@LeeTxai]

Good to see u back!!

[@Toyota529]

Hi I have a question 🙋‍♂️ I use tru-cut software from suntek my plotter machine now Which plotter program do you use for your plotter cutting machine program?

[@juswilvel]

Flawless! Anybody you'd recommend in the Sacramento, CA area?

[@Alex-er2gb]

do you guys sell this pre cut out by any chance i would like to tint my own hatchback?

[@ivortraynor7599]

Love your videos , just 1 thing I would recommend. Don’t say drivers side when your talking about what side of the car something is on because people watch your videos from all over the world and the drivers side is different in different countries, just say left or right side

[@bryanportillo6456]

Excelente brother hoy ya se como se hace saludos desde el Salvador

[@jcnavarro]

congratulations for such a great video. i'm subscribed now.

[@Neadlemeyer]

Some shops have a spare rear glass so you don’t need to take the car apart

[@abdelhakx1832]

Great video and great explanation as always keep it up

[@cold-frontin_penguin7902]

Professional af! Nice as always👌

[@pituq129]

Great tutorial. But does it have to be one piece ? Car parts come on many pieces. Vinyl wrap wrap in many pieces. That can be 2 pieces. No one sees it

[@JBIRD575]

How do you wash and dry your huck towels ???

[@dougbregg8021]

I know this is an older post, but I am honestly surprised that as accomplished as you are, you don't cover door panels or weed the film after you shrink it. I'm a hand cutter, but I've used plotters many times. It's so much easier to shrink the film and then remove the excess film to expose the liner. I'm not trying to insult you in any way, I'm just curious as to why you don't do that. Anyway, I enjoy your videos. I too am a bottom loader and panel/gasket puller. I think if more tinters realized how easy it really is to pull gaskets they would do it.

[@floyd38wr]

Where ya located

[@joev8275]

What size plotter are you using?

[@dizzidecalz]

Do you have an upcharge for removing all this?

[@manuel28889]

Very good detail buddy,, but what I do it with that kind of car when I tinted is do it an 2 pieces ,nobody’s going to see it ,, that’s my opinion??

[@GcinokuhleM]

What software you use to setup film on a pc for a plotter

[@johnr1191]

What if you snap shrink it on a peel board and touch up after it’s on the window so you don’t have to take everything apart?

[@WindowTintWarriors]

Its too much tension. Tried that. To put it in perspective, imagine trying to snap shrink a VW Beetle rear window on a peel board and then try to install it 🤣

[@blaino1]

Automotive designers should consult with window tinters before making vehicles!!!

[@chickenwingunderwear4130]

Or put a clear plastic bag next to draw it then put it in glass and trace it

[@josecastaneda-fl8hg]

It's better to buy the rear window and shrinking the way you don't waste time.

[@rubenpalencia8184]

Nice Job ....👏👏👏

[@savoymorgan3401]

Where u been at 😆

[@Raul-uh8rx]

What software pre cut are you using?

[@keenanhirzel]

DAP from expel

[@K_N_44]

With this design of the hatch door it will rust and it will send water inside from the holes of the clips

[@privera3467]

Does tint go on the inside?

[@gav6808]

It does! But you need a template to go off 1st.

[@MARK-r6c3k]

I thought it went on the inside to

[@808tintllc5]

Haha. I always give people nick names too that's classic. "Jimmy"

[@johnnyking2965]

I think I'd cringe every time I see a hatchback pull in wanting tint! LOL

[@biniamminda6015]

Lmao why

[@kevinarias1161]

@@biniamminda6015 when his car breaks down at 70k miles those tints will be useless

[@dosikzfk8]

@@kevinarias1161I never see new Hondas break down thag fast

[@Diese1505]

Shit thsts and extra labor rate for the customer lol vedgas..great detail video..I use a magnetic tray its perfect for all those dam screws 😎👍🔥🔥🔥

[@cnes84]

I can do those without taking the wing apart. One piece no splicing.

[@hozaifahsiddiqui2880]

Lol biggest lie out here buddy I’m a professional tinter and can say those are damn near impossible

[@wille.2010]

I get panic and anxiety attacks by watching this vid. I bought the glass itself, placed it in stands and pre-cut preheat final cut then install on hatchback. But that's me.

[@ahmedaziz4966]

i dare you to work with our film it doesn't shrink☹ you can't use heat it will burn

[@sosatintz]

Yo man you’re doing tooo much lol.

[@hamchillyvlog6034]

Can you show us a short cut way.

[@mymindtattedalready9257]

Ham Anuphap buy a spare back window to shrink on