This video contains detailed report on how i removed windscreen wiper scratches. Results were amazing. If you have any questions please comment down below. I will reply as soon as i can. Thank you.
Пікірлер: 132
@Juckie443 жыл бұрын
Great work with good information on how to remove scratches from glass. I am also doing this what's the buffing pad (inch) that we should use.. 3 4 or 5 inch.🙏
@AmateursDIY3 жыл бұрын
Thanks i used a 4inch pad. You can use any size.
@Juckie443 жыл бұрын
@@AmateursDIY thank you 😊
@hardikrana64032 жыл бұрын
Please add all the items you used to remove the scratches.
@santoshmishra58433 жыл бұрын
Very nice information and presentation skills also. Thank you.
@AmateursDIY3 жыл бұрын
Thank you
@Ryy227 ай бұрын
How long did it take to do the front windshield? So i mean did it take you an hour of polishing everything?
@LiveStreamDailyArchive3 жыл бұрын
Good video, love the subtitles, going to try this tomorrow morning
@AmateursDIY3 жыл бұрын
Thanks.
@JC-nx5xx2 жыл бұрын
excellent Video. But before and after Video should have been better. Let me know if its worth to do it . I am planning to do the same so. Have wiper scratches on my Car windshield.
@developerrazi2 жыл бұрын
Let me also know if you were able clean them
@JC-nx5xx2 жыл бұрын
@@developerrazi I was waiting for your reply.
@JC-nx5xx2 жыл бұрын
@@developerrazi I will try this week if you say it's worth doing it. I don't have buffing machine. Need to do it by hand.
@AmateursDIY2 жыл бұрын
It is actually better than what we see on camera. but buffing with hand is not an easy work.
@JC-nx5xx2 жыл бұрын
@@AmateursDIY Thanks for your reply. Will try to get it buffed outside using a machine. Will update you once it's done.
@glassindiagroup2 жыл бұрын
Nice Information 👍 Keep Sharing your Knowledge 👍 Best Wishes from #glassindiagroup
@GamesLanka-rw6sv4 ай бұрын
What's the polishing pad that you've used
@fahadfaiz39703 ай бұрын
Will it remove the spiderweb like scratches frm the windscreen?
@ahv5457 Жыл бұрын
Can I use just hand rather the tool to clean the scratches? I haven’t used that tool before and I’m worried to break the windshield.
@AmateursDIY Жыл бұрын
You can. But it will take very long time to get even results due to slow polishing speed. There are polishers for this if you can rent one.
@ahv5457 Жыл бұрын
@@AmateursDIY Thanks for the reply.
@beegbro4 жыл бұрын
Very helpful. Good luck👍
@jalanable2 жыл бұрын
Polishing glass will bring power effect to glass and make it difficult to drive in night.Better change the glass with new
@harisyoung41102 жыл бұрын
i never got that problem after polishing my windshield, plus its not worth to changing the glass just because there is some scratch and waterspot.
@AmateursDIY2 жыл бұрын
What do you mean by 'power effect'?
@jalanable2 жыл бұрын
@@AmateursDIY After polish your windshield will become like your power glass
@AmateursDIY2 жыл бұрын
Now its been 2 years after polishing. Still looks much better than before polishing. Also nothing wrong with windows glasses if you are reffering to them.
@jalanable2 жыл бұрын
@@AmateursDIY Bro does cerium oxide really remove small scratches From windshield
@nalin93634 жыл бұрын
Valuable video .. Upload more video too ... 🥰🔥
@chandrairugalbandara70874 жыл бұрын
Great content bro
@nalin93634 жыл бұрын
Valuable video .. Upload more video too ... 🥰🔥
@jalanable2 жыл бұрын
I have some swril marks on windshield,does polish can remove them completely?
@AmateursDIY2 жыл бұрын
If those can't be sensed with your fingernails, definitely can be removed.
@mohanm30714 жыл бұрын
Will doing without a machine (with hand) provide good results?
@AmateursDIY4 жыл бұрын
I didn't try that way. But even using a drill machine it is a hard work without proper polishing machine.
@Ashish-lk4ip3 жыл бұрын
@@AmateursDIY it's scary to not use professional instruments I did once buffing my enfield engine with drill I appied pressure and the nut bolt pierced the pad and came out and ruined layer of engine so I will not use drill for this procedure....have to buy rpm setting wala grinder like buffer
@neildacudag263 жыл бұрын
Hi there. Can cerium oxide remove the windshield scratches from the sand that went through the wiping cloth?
@AmateursDIY3 жыл бұрын
It can't remove deep scratches which can feel to our fingernails.
@rathugt41784 жыл бұрын
Thanks for this great video machn😍😍
@AmateursDIY4 жыл бұрын
Thanks
@bruhji61402 жыл бұрын
How long it will last and how is the condition now.... would you recommend it
@AmateursDIY2 жыл бұрын
Its been 3 years now. Still perfect.
@BabuDakitchenBlog3 жыл бұрын
How can I contact you, I have same problem in my car
@upulpriyantha4 жыл бұрын
Thank you for the video. Can you list out materials used
I got some swirling on the glass after doing this. My windshield is less than a year old but had sand from a snow event make some marks when wipers ran. Tried to fix with this but left some swirling on the glass. Also a small quarter sized glaze / scratched area didn't buff out. Maybe need practice? Really messy...
@Ichabod_Jericho2 жыл бұрын
Yeah…I would look to Lake Country manufacturing to get some CeriGlass and polishing pads. You might have fucked your windshield if you actually did what this guy did in the video.
@20tea2 жыл бұрын
@@Ichabod_Jericho I used an orbital with a softer pad. That did the job polishing the windows. The wool pad on the drillnis more aggressive and generates some swirling. I still have some swirls in a corner, but now they're at least polished out. Much less noticeable now. Then finish off with chemical guys ceramic glass coating.
@anandyahamdi2 жыл бұрын
@@20tea I used cerium oxide with polosher machine. The hazy glaa gone. However 1 month later the haziness came back again. I have no idea why ot keeps coming back?!
@AmateursDIY2 жыл бұрын
Have you cleaned viper blade? Or replaced viper blades
@20tea2 жыл бұрын
@@AmateursDIY I've replaced the wiper blades, so it's not the issue. So I found what worked for me. I added an auto body buffing gel to the powder along with a little water and mixed it very well into a paste. I then used an orbital with a foam pad to apply the paste to. The orbital really did a good job polishing the windshield. Only issue now is that a large rock hit the window recently and put a crack in the windshield, so I need to replace it soon.
@jbnremt2 жыл бұрын
What kind of buffing pad did you use?
@AmateursDIY2 жыл бұрын
Its on the video. Bought from aliexpress.
@deven1573 жыл бұрын
From where can I purchase good quality cerium oxide
@AmateursDIY3 жыл бұрын
I bought from a chemical shop
@teabag22583814 жыл бұрын
Good one..
@AmateursDIY4 жыл бұрын
Thanks
@rupendrasoni71902 жыл бұрын
कहा पर होती है plz बताए
@arunleo24274 жыл бұрын
What happens cerium oxide touches the paint
@AmateursDIY4 жыл бұрын
Nothing happens. It is like Very small particles.
@mr.s.m.s91912 жыл бұрын
For how long cerium oxide to be left on windscreen?
@AmateursDIY2 жыл бұрын
No need to keep for some time. Just polish with it.
@mr.s.m.s91912 жыл бұрын
@@AmateursDIY i tried,but unfortunately nothing worked First of all i used sandpaper grit nmbr 150,then 240,then 1000,after that, i used cerium oxide upon it,but either for short time,or for 1 hour,no change occured, the scratch itself gone,but the haziness doesn't vanished and it is still on the glass
@AmateursDIY2 жыл бұрын
OMG!!! You applied sand paper on windscreen!!! And 150 grit. You must have scratched the glass by using a sandpaper.
@mr.s.m.s91912 жыл бұрын
@@AmateursDIY which grit number sandpaper I've to use?
@AmateursDIY2 жыл бұрын
Don't use sandpapers. Only light scratches can be remove using cerium oxide. Otherwise you have to replace the glass i think.
@lyricaljudge9 ай бұрын
Microfayba clot.
@nooraninaats95693 жыл бұрын
What is the cost
@AmateursDIY3 жыл бұрын
3000lkr for 1kg in sri lanka
@grafdrakul96392 жыл бұрын
Guys this way 100% not working if have a scratches
@AmateursDIY2 жыл бұрын
Can you be more specific.
@bobmehra87113 жыл бұрын
आपका फोन नं मिल सकेगा
@aynkaranaymmugan82084 жыл бұрын
Superb! I will try this.
@dinushkarukshan2 жыл бұрын
Hi, Thanks for the video. From where did you buy CERIUM OXIDE?
@AmateursDIY2 жыл бұрын
from Glore Chem in Bankshall street and aliexpress
@dinushkarukshan2 жыл бұрын
@@AmateursDIY Thanks!
@kurtisdillabough83262 жыл бұрын
Got mine from a local glass store. Like glass art stores.
@talonsprem87652 жыл бұрын
You can also use other liquids from wavex that also helps
@anandyahamdi2 жыл бұрын
I used cerium oxide with polosher machine. The hazy glass gone. However 1 month later the hazy surface came back again. I have no idea why it keeps coming back?i
@ccsabith3 жыл бұрын
Which tool are used in machine for rubbing Sponge or woollen Pls reply
@AmateursDIY3 жыл бұрын
Not sponge. Looks like a rayon polishing pad. Some call it automotive polishing pad. Be careful wrong material may scratch the glass
@ccsabith3 жыл бұрын
@@AmateursDIY Which company used
@AmateursDIY3 жыл бұрын
I just bought from aliexpress
@ccsabith3 жыл бұрын
@@AmateursDIY which company
@AmateursDIY3 жыл бұрын
It was brandless
@brianu332 жыл бұрын
I thought I had to use the pad on an angle. I see you use it flat. Does it matter?
@AmateursDIY2 жыл бұрын
With small angle. Not completely flat.
@bobmehra87113 жыл бұрын
सीरियम आक्साइड किस दुकान में मिलेगा,
@rajZ7722 жыл бұрын
Can i use drill machine to attach the pad? Or do i need a special buffering machine only?
@AmateursDIY2 жыл бұрын
I'm using drill machine with slowest seed setting. Better if you can have a polishing machine or you can rent one.
@ramakrishnans75102 жыл бұрын
Aahaa. Super. Thank u
@tanzilmohammed76072 жыл бұрын
Hi , i can see from your video that after polishing there is blurryness in the windshield like hand marks , is it due to improper cleaning after the process or is it that polishing leaves such results ?
@alex.preda1 Жыл бұрын
try yo clean it with izopropilic alchool. if the marks doesnt desapear, you used too much heat in the process and the plastic lamination between the glass layers has been deteriorated. The effect is ireversible. you need to control the temperature of the glas. Maximum 50 degrees celsius. After 3 passes, always check the temperature with hand.
@AmateursDIY Жыл бұрын
It just oil from my hands, Small amount of glaas cleaner will just do the job. Its been more than 3 years now. Still looks good.
@bishwajeetsingh92322 жыл бұрын
If I installed film in glass is it work from.
@AmateursDIY2 жыл бұрын
What kind of film?
@anant00893 жыл бұрын
The uses buffing pads with a normal hammer drill from bosh work ?
@AmateursDIY3 жыл бұрын
My one is also a hammer drill. I used lowest speed. Carefull when choosing buffing pads. Some may scratch the glass.
@ambicaglasscenter5522 жыл бұрын
how to buy for this glass kit ?
@AmateursDIY2 жыл бұрын
I got from aliexpress
@DAP-mi7ck4 жыл бұрын
Thank you from Slovakia. Good job.
@pabasaraweesinghe71954 жыл бұрын
Good stuff man 👍
@arunleo24274 жыл бұрын
My friend said that in future the glass will get dark
@AmateursDIY4 жыл бұрын
Yeah. I'm warried about it. Now it is been over a year. nothings changed. But it could take several years. But i think if that happens only the polished surface will be dark. So i have to polish again using cerium oxide or a professional product or i might have to replace it😬😅
@arunleo24273 жыл бұрын
@@AmateursDIY ok
@danstheory41644 жыл бұрын
My arms feels like dying after 3 hours of polishing, but it's worth it. Less glare during night time especially from bright led headlights.
@AmateursDIY4 жыл бұрын
Yeah. Same here😅 It hurts. But definitely worth it. Specially during night driving at rainy days.